stunnel-users June 2008

stunnel-users@stunnel.org

21 participants
23 discussions

Re: [stunnel-users] Stunnel on the same machine
by subrata＠indiatimes.com 01 Aug '11

01 Aug '11

The configuration files are : pid = /var/stunnel.pid ;chroot = /var/lib/stunnel setuid = nobody setgid = nobody foreground =yes ; Use it for client mode client = yes ; Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [mysqls] accept = 3307 connect = 192.168.1.6:3307 On 192.168.1.6 ---------------------- pid = /var/stunnel.pid setuid =nobody setgid = nobody foreground = yes client = no ; Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 25 [mysqls] accept =3307 connect =3306 connecting like /usr/local/mysql/bin/mysql -h 127.0.0.1 -u root -p -P 3307 Enter password: On entring password the following lines appear : ERROR 2013 (HY000): Lost connection to MySQL server at 'reading initial communication packet', system error: 104 Subrata ----- Original Message ----- From: Brian Hatch <bri(a)stunnel.org> To: subrata(a)indiatimes.com Sent: Sun, 7 Oct 2007 10:02:17 +0530 (IST) Subject: Re: [stunnel-users] Stunnel on the same machine Near 2007-10-05 22:17 +0530, subrata(a)indiatimes.com insisted: > After starting stunnel and connecting the mysql client/usr/local/mysql/bin/mysql -h 127.0.0.1 -u root -p the flow gets stuck at the Enter password prompt any suggestions how to proceed from there. What do your stunnel configuration files look like? Other problem: mysql client may decide to use a local domain socket when connecting to localhost, thwarting your attempts to go via Stunnel. You might want to 'strace mysql ...' and look for the connect() lines. -- Brian Hatch Time flies like an Systems and arrow. Fruit flies Security Engineer like a banana. http://www.ifokr.org/bri/ Every message PGP signed -- My life has changed. What about yours? Log on to the new Indiatimes Mail and Live out of the Inbox!

3 3

Re: [stunnel-users] rewrite Destination: when rewriting Host:
by Brian Hatch 07 Oct '09

07 Oct '09

Sometime near 2007-11-11 00:15 -0500, Marcio Marchini shouted: > Researching online one can see that WebDAV's spec requires that they > check both src and dest URLs for protocol & port. But with some proxies or > SSL fronts like stunnel, only one of the URLs is rewritten, so one goes as > http and the other as https. Here's one person explaining it, much better > than me: http://svn.haxx.se/users/archive-2006-03/0549.shtml Stunnel doesn't currently have the ability to scan and re-write the plaintext. For HTTP redirects it could possibly be implemented (re-write only the response before ^$, and redirects aren't chunked and don't have content lengths to work with, etc) but you'd still need enough HTTP logic to handle keepalives and such. It's not trivial and not likely. Another option would be to have something already HTTP aware doing the rewriting in between stunnel and subversion. A re-writing proxy. Another option would be to use mod_rewrite in apache to rewrite the urls. But the best way would be to just use SSL inside apache and drop stunnel entirely. -- Brian Hatch The best way to accelerate Systems and a Windows machine is at Security Engineer 9.8 meters per second http://www.ifokr.org/bri/ squared. Every message PGP signed

3 2

Using externally signed certificate with stunnel 4
by Tim Skirvin 07 Jul '08

07 Jul '08

I've got a comodo signed SSL certificate that I'm trying to use with stunnel4 to allow secure NNTP connections from a wide variety of clients. The certificate at least partially works; if I leave 'verify' off in the stunnel.conf file, then the service runs and users can connect, albeit while still having to verify the cert. But if I turn 'verify' on, then it doesn't work on *either* side. I've tried playing with CAfile and CApath without much luck. I'll attach my configuration files, the relevant pems, and some debugging information; is there something else I'm missing? I've already contacted comodo, and after several rounds of conversation they suggest I contact the list. Errors from the client side (note that I'm using a debug port here): + openssl s_client -connect news:565 -verify -debug verify depth is 0 CONNECTED(00000003) depth=2 /C=US/O=Entrust.net/OU=www.entrust.net/CPS incorp. by ref. (limits liab.)/OU=(c) 1999 Entrust.net Limited/CN=Entrust.net Secure Server Certification Authority verify error:num=19:self signed certificate in certificate chain verify return:0 6976:error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed:s3_clnt.c:951: ...and on the server, I get this: 2008.06.30 14:08:38 LOG7[10039:47679267941088]: nntps accepted FD=7 from 171.64.19.111:56122 2008.06.30 14:08:38 LOG7[10039:1073809760]: nntps started 2008.06.30 14:08:38 LOG7[10039:1073809760]: FD 7 in non-blocking mode 2008.06.30 14:08:38 LOG7[10039:1073809760]: FD 8 in non-blocking mode 2008.06.30 14:08:38 LOG7[10039:1073809760]: FD 9 in non-blocking mode 2008.06.30 14:08:38 LOG7[10039:47679267941088]: Cleaning up the signal pipe 2008.06.30 14:08:38 LOG6[10039:47679267941088]: Child process 10247 finished with code 0 2008.06.30 14:08:38 LOG7[10039:1073809760]: Connection from 171.64.19.111:56122 permitted by libwrap 2008.06.30 14:08:38 LOG5[10039:1073809760]: nntps connected from 171.64.19.111:56122 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL state (accept): before/accept initialization 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL state (accept): SSLv3 read client hello A 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL state (accept): SSLv3 write server hello A 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL state (accept): SSLv3 write certificate A 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL state (accept): SSLv3 write certificate request A 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL state (accept): SSLv3 flush data 2008.06.30 14:08:38 LOG7[10039:1073809760]: SSL alert (read): fatal: unknown CA 2008.06.30 14:08:38 LOG3[10039:1073809760]: SSL_accept: 14094418: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca 2008.06.30 14:08:38 LOG5[10039:1073809760]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2008.06.30 14:08:38 LOG7[10039:1073809760]: nntps finished (0 left) Basic Requested Information that wasn't supplied above: * stunnel 4.18-2 on Debian etch (2.6.18-6-686 #1 SMP) * Running standalone with '/usr/bin/stunnel4 /etc/news/stunnel.conf' * libc6, no gcc, OpenSSL 0.9.8c-4etch3 * The log on startup: 2008.06.30 14:00:15 LOG7[26276:3083523776]: Snagged 64 random bytes from /root/.rnd 2008.06.30 14:00:15 LOG7[26276:3083523776]: Wrote 1024 new random bytes to /root/.rnd 2008.06.30 14:00:15 LOG7[26276:3083523776]: RAND_status claims sufficient entropy for the PRNG 2008.06.30 14:00:15 LOG7[26276:3083523776]: PRNG seeded successfully 2008.06.30 14:00:15 LOG7[26276:3083523776]: Configuration SSL options: 0x01000000 2008.06.30 14:00:15 LOG7[26276:3083523776]: SSL options set: 0x01000000 2008.06.30 14:00:15 LOG7[26276:3083523776]: Certificate: /etc/ssl/certs/news-stunnel.pem 2008.06.30 14:00:15 LOG7[26276:3083523776]: Certificate loaded 2008.06.30 14:00:15 LOG7[26276:3083523776]: Key file: /etc/ssl/private/news-stunnel.key 2008.06.30 14:00:15 LOG7[26276:3083523776]: Private key loaded 2008.06.30 14:00:15 LOG7[26276:3083523776]: Loaded verify certificates from /etc/ssl/certs/comodo.cert 2008.06.30 14:00:15 LOG7[26276:3083523776]: SSL context initialized for service nntps - Tim Skirvin (tskirvin(a)stanford.edu) -- Information Technology Services http://www.stanford.edu/~tskirvin/ System Software Developer, Unix Team Stanford University

1 1

Stunnel v4.25 vs v4.20
by James Moe 30 Jun '08

30 Jun '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I upgraded to v4.25 and stunnel aborts right away. v4.20 works just fine. What is protocol family 47? ====[ log file ]==== 2008.06.26 11:31:01 LOG5[282:8553]: stunnel 4.25 on i386-pc-os2-emx with OpenSSL 0.9.8h 28 May 2008 2008.06.26 11:31:01 LOG5[282:8553]: Threading: SSL:ENGINE Sockets:SELECT,IPv4 2008.06.26 11:31:01 LOG3[282:8553]: Error binding pop3.sma.com_L110-R995 to 127.0.0.1:110 2008.06.26 11:31:01 LOG3[282:8553]: bind: Address family not supported by protocol family (47) ====[ conf file ]==== socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 client = yes output = G:/c/voice/pmmdev/testcase/bin/stunnel.log verify = 0 debug = 5 cert = g:/c/voice/pmmdev/testcase/bin/sma-test.pem [pop3.sma.com_L110-R995] accept = localhost:110 connect = pop3.sma.com:995 ;# protocol = pop3 [smtpauth.earthlink.net_L6025-R587] accept = localhost:6025 connect = smtpauth.earthlink.net:587 protocol = smtp [sohnen-moe.com:L6125:R587] accept = localhost:6125 connect = sohnen-moe.com:587 protocol = smtp [smtp.sma.com_L25-R587] accept = localhost:25 connect = smtp.sma.com:587 protocol = smtp - -- jimoe (at) sohnen-moe (dot) com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (OS/2) iD8DBQFIY+DkzTcr8Prq0ZMRArW+AJ4uOJFOGyluIj52DG4cM62jMPs8NACfbug2 oVsLAXJ+fH1Raj568dGn2mM= =JSCM -----END PGP SIGNATURE-----

1 1

Re: [stunnel-users] Stunnel 4.21 99% cpu ultilization
by Fat Wallet 30 Jun '08

30 Jun '08

Hi, Can someone please help with this issue? This 100% cpu utilization issue happens randomly on multiprocess cpu. Thanks! ----- Original Message ---- From: Fat Wallet <fat8wallet(a)yahoo.com> To: stunnel-users(a)mirt.net Sent: Monday, June 23, 2008 10:39:16 AM Subject: Stunnel 4.21 99% cpu ultilization Hi All, I've been googling for this issue but it seems like google is not my friend at the moment. I am running Linux with 4 cpus and top command shows stunnel at 99-100% cpu. Please help. //stunnel configuration file # PID is created inside chroot jail pid = /var/run/stunnel.pid # debug debug = 7 output = /var/log/stunnel.log # Authentication stuff verify = 2 cert = /etc/stunnel/cert.pem CAfile = /etc/stunnel/ca.pem #Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 # Use it for client mode client = yes /////////// stunnel version stunnel 4.21 on i686-pc-linux-gnu with OpenSSL 0.9.7a Feb 19 2003 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none //openssl version OpenSSL 0.9.7a Feb 19 2003 //Redhat version Red Hat Linux release 9 (Shrike) root]#cat /proc/cpuinfo | grep processor | wc -l 4 http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

UPNP & Nat-PMP with Stunnel
by Dean Shavit 26 Jun '08

26 Jun '08

Stunnel works great for me, but with dynamic port forwarding, I've not been able to get it working. I suspect it's because stunnel is a bit confusing about which port to reply to... Anyone else found a way to crack this nut?

1 0

How do I kill stunnel?
by Grant Edwards 25 Jun '08

25 Jun '08

I've got an application that starts stunnel using equivalent of a fork/exec. The stunnel process then appears to fork off multiple copies of itself. Before the application exits, it needs to stop stunnel. I send a SIGINT to the PID that was created using the fork, but only the first "master" copy terminates -- the master stunnel process doesn't terminate its children when it exits. So I end up with a bunch of "orphaned" stunnel processes. They're not zombies, they're process that are either in state R or S (runnable or sleeping). How do I tell stunnel to not only terminate, but to terminate whatever child processes it has created? -- Grant Edwards grante Yow! Zippy's brain cells at are straining to bridge visi.com synapses ...

2 4

Stunnel config files incompatible between 4.05 and 4.21 ?
by Brian McKee 25 Jun '08

25 Jun '08

Hi All, I have a stunnel config file that works fine on an older Mandrake machine running stunnel 4.05. If I use that same config file on a new Ubuntu machine running 4.21 it just dies with "/etc/stunnel/stunnel.pem: No such file or directory" IIUC, running in client mode it doesn't need a .pem file, and I didn't create any certifcates on the Mandrake machines. Do I need to generate a cert for some reason? I've attached the config below. Brian =============================== client = yes [telnet] accept = 23 connect = some.ip.number.removed:992 [as-central] accept = 8470 connect = some.ip.number.removed:9470 [as-database] accept = 8471 connect = some.ip.number.removed:9471 [as-rmtcmd] accept = 8475 connect = some.ip.number.removed:9475

1 0

Is the "HTTP Proxy connect" feature implemented?
by alex Wright 24 Jun '08

24 Jun '08

Hey, I'm trying to use stunnel in the following scenerio: ssh-client -> stunnel (to ssl) -> Proxy -> server(ssl to ssh). I downloaded stunnel 4.25, but I hadn't noiticed any support for this. However, in the "patches" page (http://www.stunnel.org/patches/) - three patches seem to be suitable: (connect-proxy_dunbar.patch<http://www.stunnel.org/patches/patches/connect-proxy_dunbar.patch>, connect-proxy.mwald.patch<http://www.stunnel.org/patches/patches/connect-proxy.mwald.patch>) but are for version 4.05 (whichwill probably be a pain to merge with current version). When I stumbled upon the Changelog ( http://www.stunnel.org/download/ChangeLog.txt) I noticed that version 4.15, has support for "Client mode CONNECT protocol" - which is what I need - and altough i had looked hard, I haven't found any documentation to it. So, is the above feature what I want (and if so - how do I use it?) or do I need to update the patches to the current version? Thanks in advance, Alex.

1 0

Stunnel 4.21 99% cpu ultilization
by Fat Wallet 23 Jun '08

23 Jun '08

Hi All, I've been googling for this issue but it seems like google is not my friend at the moment. I am running Linux with 4 cpus and top command shows stunnel at 99-100% cpu. Please help. //stunnel configuration file # PID is created inside chroot jail pid = /var/run/stunnel.pid # debug debug = 7 output = /var/log/stunnel.log # Authentication stuff verify = 2 cert = /etc/stunnel/cert.pem CAfile = /etc/stunnel/ca.pem #Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 # Use it for client mode client = yes /////////// stunnel version stunnel 4.21 on i686-pc-linux-gnu with OpenSSL 0.9.7a Feb 19 2003 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none //openssl version OpenSSL 0.9.7a Feb 19 2003 //Redhat version Red Hat Linux release 9 (Shrike) root]#cat /proc/cpuinfo | grep processor | wc -l 4 http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users June 2008