stunnel-users February 2015

stunnel-users@stunnel.org

14 participants
13 discussions

Stunnel 4 failing to connect to gmail
by Asif Iqbal 11 Dec '20

11 Dec '20

I am faling to connect to gmail. Not sure what that bind error means. iqbala@ghar:~$ sudo stunnel4 2008.12.15 13:53:17 LOG7[3839:3083650736]: Snagged 64 random bytes from /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: Wrote 1024 new random bytes to /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: RAND_status claims sufficient entropy for the PRNG 2008.12.15 13:53:17 LOG7[3839:3083650736]: PRNG seeded successfully 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: Key file: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Private key loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: SSL context initialized for service ssmtp 2008.12.15 13:53:17 LOG5[3839:3083650736]: stunnel 4.22 on i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2008.12.15 13:53:17 LOG5[3839:3083650736]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2008.12.15 13:53:17 LOG6[3839:3083650736]: file ulimit = 1024 (can be changed with 'ulimit -n') 2008.12.15 13:53:17 LOG6[3839:3083650736]: poll() used - no FD_SETSIZE limit for file descriptors 2008.12.15 13:53:17 LOG5[3839:3083650736]: 500 clients allowed 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 10 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 11 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 12 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: SO_REUSEADDR option set on accept socket 2008.12.15 13:53:17 LOG3[3839:3083650736]: Error binding ssmtp to 74.125.93.111:587 2008.12.15 13:53:17 LOG3[3839:3083650736]: bind: Cannot assign requested address (99) Here is how my conf file looks like iqbala@ghar:~$ cat /etc/stunnel/stunnel.conf | egrep -v "^;|^$" cert = /etc/stunnel/stunnel.pem foreground = yes sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes [ssmtp] accept = smtp.gmail.com:587 connect = 25 Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu

5 9

stunnel and hosts.allow
by Yousef Alhashemi 05 Jul '16

05 Jul '16

Hi, This may be a little bit off-topic, but does anyone here use stunnel with pan? My connections to stunnel (in pan) are always refused by libwrap. I was looking for the right rule to add to /etc/hosts.allow but nothing seems to work aside from "ALL : ALL" (which is obviously not good) and "nntps: KNOWN". Is the latter reasonable? The hosts_access(5) manpage is confusing to say the least. It mentions that daemon (the first token on any line) is the name of the daemon running the process, which would be "stunnel" in my case, but using "stunnel : LOCAL" or even "stunnel : ALL" doesn't work. The rule that seems to work, as mentioned, is "nntps : KNOWN" ("nntps" being the group name in stunnel.conf). What's even more confusing to me is that "nntps : LOCAL" does not work either. Nor does "nntps : localhost 127.0.0.1", "nntps : localhost", "nntps : 127.0.0.1", or "nntps : 192.168.1.". Pan is running on the same machine as stunnel so all connections must be coming from localhost. Why do these rules not trigger? Either way, I'd like to know the "least permissive" hosts.allow rule that would allow me to connect to my news provider from pan, and/or whether "nntps : KNOWN" is a safe option. Thanks, Yousef

3 6

Re: [stunnel-users] [stunnel-announce] stunnel 5.10 released - Problem compiling stunnel 5.10 with openssl 1.0.2
by WNSDEV 26 Feb '15

26 Feb '15

stunnel 5.10 openssl 1.0.2 Ubuntu 10.04 Server lucid after installing automake-1.14.1 (required as of 5.08) and running configure without a problem, make fails with this message: /usr/bin/ld: /ssl-1.0.2/lib/libssl.a(s2_srvr.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC /ssl-1.0.2/lib/libssl.a: could not read symbols: Bad value I can resolve this issue by commenting the assignment of CFLAGS and LDFLAGS in the stunnel configure script so -fPIE and -pie -fPIE are not implemented. # stunnel_CFLAGS="$stunnel_CFLAGS -fPIE" # stunnel_LDFLAGS="$stunnel_LDFLAGS -pie -fPIE" This is not required in stunnel 5.07 or earlier versions. I'm not sure exactly what the issue is here.. can anyone explain what the conflict is? Thx Pete -----Original Message----- From: Michal Trojnara [mailto:Michal.Trojnara@mirt.net] Sent: Thursday, January 22, 2015 9:20 AM To: stunnel-users(a)stunnel.org; stunnel-announce(a)stunnel.org; openssl-users(a)openssl.org Subject: [stunnel-announce] stunnel 5.10 released -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Users, I have released version 5.10 of stunnel. The ChangeLog entry: Version 5.10, 2015.01.22, urgency: LOW: * New features - OCSP AIA (Authority Information Access) support. This feature can be enabled with the new service-level option "OCSPaia". - Additional security features of the linker are enabled: "-z relro", "-z now", "-z noexecstack". * Bugfixes - OpenSSL DLLs updated to version 1.0.1l. https://www.openssl.org/news/secadv_20150108.txt - FIPS canister updated to version 2.0.9 in the Win32 binary build. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 032bfc1854f8a0b9e452343c36ec6b52c7e0daef0863423c6b13a61a7c92eb23 stunnel-5.10.tar.gz 7c29753b6488f37b29f365e9c4a6060c3da8a89000af1cd29eab7c37d419d148 stunnel-5.10-installer.exe 93cd0941580eaa7815ed62ec88a111cb449e9bad97cd1a35d7524867a8238234 stunnel-5.10-android.zip Best regards, Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlTBMTsACgkQ/NU+nXTHMtE+uQCg9N0butSpAQ2mM1M5ySe7T18i oe8AoOAHKJ9F7jMlUfHnmuzBtIPbbghN =e9ed -----END PGP SIGNATURE----- _______________________________________________ stunnel-announce mailing list stunnel-announce(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-announce

2 1

Gmail POP3 retrieval, SSL-Error and Cert Chain
by Tobias Ruch 24 Feb '15

24 Feb '15

Hi, I want to use stunnel to enable ssl on port 995. Unfortunately, I got "SSL error: Unable to verify the first certificate." when using the gmail pop3 retrieval My Certificate is signed by wosign and included in the mozialla truststore list. https://www.ssllabs.com/ssltest/analyze.html gives me a grad A for my apache configuration and chrome and firefox are also fine with this certificate. So it's no self signed one. For a test I have configured stunnel to serve https. I get than the message that the chain is incomplete. According to https://www.digicert.com/ssl-support/gmail-pop3-troubleshooting.htm this could be one reason for this error. My Apache-config looks like this SSLCertificateFile /etc/apache2/ssl/mydomain.crt SSLCertificateKeyFile /etc/apache2/ssl//mydomain.key SSLCertificateChainFile /etc/apache2/ssl/1_root_bundle.crt SSLCACertificateFile /etc/apache2/ssl/ca-certs.pem for stunnel I used cert = /etc/apache2/ssl/mydomain.crt key = /etc/apache2/ssl//mydomain.key CAfile = /etc/apache2/ssl/1_root_bundle.crt or ca-certs.pem (I have tried both). What is the a similar configuration in stunnel? The Post https://www.stunnel.org/pipermail/stunnel-users/2010-February/002594.html mentioned, that the chain must be completely in the crt-file. But a description how to achieve this is missing and I found no other resources describing this. Thanks a lot Tobias

1 0

Stunnel for EWS servers?
by shanmuganathan sedukumar 20 Feb '15

20 Feb '15

HI, We are already using stunnel as SSL wrapper for retrieving emails from POP3 servers to our application server. In future the mailboxes are planned to be migrated to EWS servers. Would like to know if stunnel holds good for EWS servers as well. Regards,Shanmuganathan

2 1

TLSv1 - Linux vs Windows ?
by Brian Ipsen 16 Feb '15

16 Feb '15

Hi I have a strange issue with stunnel 5.09 - which connects up to a F5 loadbalancer/SSL-offloading engine. In my config, I specify that the protocol must be TLSv1 - from Linux, I can connect - but it does not work from Windows.. Linux log: 2015.02.10 15:58:29 LOG7[22779]: Service [rb20] accepted (FD=3) from 127.0.0.1:33247 2015.02.10 15:58:29 LOG7[22887]: Service [rb20] started 2015.02.10 15:58:29 LOG5[22887]: Service [rb20] accepted connection from 127.0.0.1:33247 2015.02.10 15:58:29 LOG6[22887]: s_connect: connecting A.B.C.D:443 2015.02.10 15:58:29 LOG7[22887]: s_connect: s_poll_wait A.B.C.D:443: waiting 10 seconds 2015.02.10 15:58:29 LOG5[22887]: s_connect: connected A.B.C.D:443 2015.02.10 15:58:29 LOG5[22887]: Service [rb20] connected remote server from 10.11.12.101:33477 2015.02.10 15:58:29 LOG7[22887]: Remote socket (FD=11) initialized 2015.02.10 15:58:29 LOG6[22887]: SNI: sending servername: host.domain.com 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): before/connect initialization 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): SSLv3 write client hello A 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): SSLv3 read server hello A 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): SSLv3 read finished A 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): SSLv3 write change cipher spec A 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): SSLv3 write finished A 2015.02.10 15:58:29 LOG7[22887]: SSL state (connect): SSLv3 flush data 2015.02.10 15:58:29 LOG7[22887]: 1 items in the session cache 2015.02.10 15:58:29 LOG7[22887]: 5 client connects (SSL_connect()) 2015.02.10 15:58:29 LOG7[22887]: 5 client connects that finished 2015.02.10 15:58:29 LOG7[22887]: 0 client renegotiations requested 2015.02.10 15:58:29 LOG7[22887]: 0 server connects (SSL_accept()) 2015.02.10 15:58:29 LOG7[22887]: 0 server connects that finished 2015.02.10 15:58:29 LOG7[22887]: 0 server renegotiations requested 2015.02.10 15:58:29 LOG7[22887]: 4 session cache hits 2015.02.10 15:58:29 LOG7[22887]: 0 external session cache hits 2015.02.10 15:58:29 LOG7[22887]: 0 session cache misses 2015.02.10 15:58:29 LOG7[22887]: 0 session cache timeouts 2015.02.10 15:58:29 LOG6[22887]: SSL connected: previous session reused 2015.02.10 15:58:29 LOG7[22779]: Service [rb20] accepted (FD=12) from 127.0.0.1:33249 2015.02.10 15:58:29 LOG6[22887]: Read socket closed (read hangup) 2015.02.10 15:58:29 LOG7[22887]: Sending close_notify alert 2015.02.10 15:58:29 LOG7[22887]: SSL alert (write): warning: close notify 2015.02.10 15:58:29 LOG6[22887]: SSL_shutdown successfully sent close_notify alert 2015.02.10 15:58:29 LOG7[22888]: Service [rb20] started 2015.02.10 15:58:29 LOG5[22888]: Service [rb20] accepted connection from 127.0.0.1:33249 2015.02.10 15:58:29 LOG6[22888]: s_connect: connecting A.B.C.D:443 2015.02.10 15:58:29 LOG7[22888]: s_connect: s_poll_wait A.B.C.D:443: waiting 10 seconds 2015.02.10 15:58:29 LOG5[22888]: s_connect: connected A.B.C.D:443 2015.02.10 15:58:29 LOG5[22888]: Service [rb20] connected remote server from 10.11.12.101:33479 2015.02.10 15:58:29 LOG7[22888]: Remote socket (FD=13) initialized 2015.02.10 15:58:29 LOG6[22888]: SNI: sending servername: ssl39.dmsave.com 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): before/connect initialization 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): SSLv3 write client hello A 2015.02.10 15:58:29 LOG6[22887]: SSL socket closed (SSL_read) 2015.02.10 15:58:29 LOG7[22887]: Sent socket write shutdown 2015.02.10 15:58:29 LOG5[22887]: Connection closed: 136 byte(s) sent to SSL, 52 byte(s) sent to socket 2015.02.10 15:58:29 LOG7[22887]: Remote socket (FD=11) closed 2015.02.10 15:58:29 LOG7[22887]: Local socket (FD=3) closed 2015.02.10 15:58:29 LOG7[22887]: Service [rb20] finished (1 left) 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): SSLv3 read server hello A 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): SSLv3 read finished A 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): SSLv3 write change cipher spec A 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): SSLv3 write finished A 2015.02.10 15:58:29 LOG7[22888]: SSL state (connect): SSLv3 flush data 2015.02.10 15:58:29 LOG7[22888]: 1 items in the session cache 2015.02.10 15:58:29 LOG7[22888]: 6 client connects (SSL_connect()) 2015.02.10 15:58:29 LOG7[22888]: 6 client connects that finished 2015.02.10 15:58:29 LOG7[22888]: 0 client renegotiations requested 2015.02.10 15:58:29 LOG7[22888]: 0 server connects (SSL_accept()) 2015.02.10 15:58:29 LOG7[22888]: 0 server connects that finished 2015.02.10 15:58:29 LOG7[22888]: 0 server renegotiations requested 2015.02.10 15:58:29 LOG7[22888]: 5 session cache hits 2015.02.10 15:58:29 LOG7[22888]: 0 external session cache hits 2015.02.10 15:58:29 LOG7[22888]: 0 session cache misses 2015.02.10 15:58:29 LOG7[22888]: 0 session cache timeouts 2015.02.10 15:58:29 LOG6[22888]: SSL connected: previous session reused Windows log: 2015.02.10 16:07:36 LOG7[9528]: Service [rb20] accepted (FD=1128) from 127.0.0.1:50353 2015.02.10 16:07:36 LOG7[9528]: Creating a new thread 2015.02.10 16:07:36 LOG7[9528]: New thread created 2015.02.10 16:07:36 LOG7[7056]: Service [rb20] started 2015.02.10 16:07:36 LOG5[7056]: Service [rb20] accepted connection from 127.0.0.1:50353 2015.02.10 16:07:36 LOG6[7056]: s_connect: connecting A.B.C.D:443 2015.02.10 16:07:36 LOG7[7056]: s_connect: s_poll_wait A.B.C.D:443: waiting 10 seconds 2015.02.10 16:07:36 LOG5[7056]: s_connect: connected A.B.C.D:443 2015.02.10 16:07:36 LOG5[7056]: Service [rb20] connected remote server from 192.168.225.103:50354 2015.02.10 16:07:36 LOG7[7056]: Remote socket (FD=1124) initialized 2015.02.10 16:07:36 LOG6[7056]: SNI: sending servername: host.domain.com 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): before/connect initialization 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 write client hello A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 read server hello A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 read server certificate A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 read server done A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 write client key exchange A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 write change cipher spec A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 write finished A 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 flush data 2015.02.10 16:07:36 LOG7[7056]: SSL state (connect): SSLv3 read finished A 2015.02.10 16:07:36 LOG7[7056]: 1 items in the session cache 2015.02.10 16:07:36 LOG7[7056]: 1 client connects (SSL_connect()) 2015.02.10 16:07:36 LOG7[7056]: 1 client connects that finished 2015.02.10 16:07:36 LOG7[7056]: 0 client renegotiations requested 2015.02.10 16:07:36 LOG7[7056]: 0 server connects (SSL_accept()) 2015.02.10 16:07:36 LOG7[7056]: 0 server connects that finished 2015.02.10 16:07:36 LOG7[7056]: 0 server renegotiations requested 2015.02.10 16:07:36 LOG7[7056]: 0 session cache hits 2015.02.10 16:07:36 LOG7[7056]: 0 external session cache hits 2015.02.10 16:07:36 LOG7[7056]: 0 session cache misses 2015.02.10 16:07:36 LOG7[7056]: 0 session cache timeouts 2015.02.10 16:07:36 LOG7[7056]: Peer certificate was cached (1521 bytes) 2015.02.10 16:07:36 LOG6[7056]: SSL connected: new session negotiated 2015.02.10 16:07:36 LOG6[7056]: Negotiated TLSv1 ciphersuite RC4-MD5 (128-bit encryption) 2015.02.10 16:07:36 LOG7[7056]: Compression: null, expansion: null 2015.02.10 16:07:36 LOG6[7056]: Read socket closed (readsocket) 2015.02.10 16:07:36 LOG7[7056]: Sending close_notify alert 2015.02.10 16:07:36 LOG7[7056]: SSL alert (write): warning: close notify 2015.02.10 16:07:36 LOG6[7056]: SSL_shutdown successfully sent close_notify alert 2015.02.10 16:07:36 LOG7[9528]: Service [rb20] accepted (FD=1132) from 127.0.0.1:50355 2015.02.10 16:07:36 LOG7[9528]: Creating a new thread 2015.02.10 16:07:36 LOG7[9528]: New thread created 2015.02.10 16:07:36 LOG7[2164]: Service [rb20] started 2015.02.10 16:07:36 LOG5[2164]: Service [rb20] accepted connection from 127.0.0.1:50355 2015.02.10 16:07:36 LOG6[2164]: s_connect: connecting A.B.C.D:443 2015.02.10 16:07:36 LOG7[2164]: s_connect: s_poll_wait A.B.C.D:443: waiting 10 seconds 2015.02.10 16:07:36 LOG5[2164]: s_connect: connected A.B.C.D:443 2015.02.10 16:07:36 LOG5[2164]: Service [rb20] connected remote server from 192.168.225.103:50356 2015.02.10 16:07:36 LOG7[2164]: Remote socket (FD=1152) initialized 2015.02.10 16:07:36 LOG6[2164]: SNI: sending servername: host.domain.com 2015.02.10 16:07:36 LOG7[2164]: SSL state (connect): before/connect initialization 2015.02.10 16:07:36 LOG7[2164]: SSL state (connect): SSLv3 write client hello A 2015.02.10 16:07:36 LOG6[7056]: SSL socket closed (SSL_read) 2015.02.10 16:07:36 LOG7[7056]: Sent socket write shutdown 2015.02.10 16:07:36 LOG5[7056]: Connection closed: 89 byte(s) sent to SSL, 52 byte(s) sent to socket 2015.02.10 16:07:36 LOG7[7056]: Remote socket (FD=1124) closed 2015.02.10 16:07:36 LOG7[7056]: Local socket (FD=1128) closed 2015.02.10 16:07:36 LOG7[7056]: Service [rb20] finished (1 left) The main difference I can see, is that on Linux I get: 2015.02.10 15:58:29 LOG6[22887]: SSL connected: previous session reused Whereas Windows gives me: 2015.02.10 16:07:36 LOG7[7056]: Peer certificate was cached (1521 bytes) 2015.02.10 16:07:36 LOG6[7056]: SSL connected: new session negotiated Any idea why this happens ? The final result is that connections are possible from linux - but not Windows - and this is a problem for me... Regards /Brian

2 2

stunnel transparent mode stuck in timeout
by shushant.kakkar＠lhsystems.com 09 Feb '15

09 Feb '15

Hi, we would like to use stunnel in transpartent mode. Therefore we already applied iptable changes as mentioned in the man page : Re-write address to appear as if wrapped daemon is connecting from the SSL client machine instead of the machine running stunnel. This option is currently available in: remote mode (I<connect> option) on Linux >=2.6.28 Linux >=2.6.28 requires the following setup for iptables and routing (possibly in /etc/rc.local or equivalent file): iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 1 iptables -t mangle -A DIVERT -j ACCEPT ip rule add fwmark 1 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 However the connection to the services cannot be established and we run into a timeout. 2015.02.09 10:00:03 LOG7[6658:139940568909760]: ldaps-in accepted FD=12 from xxxxxx:51018 2015.02.09 10:00:03 LOG7[6658:139940568905472]: ldaps-in started 2015.02.09 10:00:03 LOG7[6658:139940568905472]: FD 12 in non-blocking mode 2015.02.09 10:00:03 LOG7[6658:139940568905472]: Waiting for a libwrap process 2015.02.09 10:00:03 LOG7[6658:139940568905472]: Acquired libwrap process #0 2015.02.09 10:00:03 LOG7[6658:139940568905472]: Releasing libwrap process #0 2015.02.09 10:00:03 LOG7[6658:139940568905472]: Released libwrap process #0 2015.02.09 10:00:03 LOG7[6658:139940568905472]: ldaps-in permitted by libwrap from xxxxxxx:51018 2015.02.09 10:00:03 LOG5[6658:139940568905472]: ldaps-in accepted connection from xxxxxxx:51018 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): before/accept initialization 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 read client hello A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 write server hello A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 write certificate A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 write server done A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 flush data 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 read client key exchange A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 read finished A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 write change cipher spec A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 write finished A 2015.02.09 10:00:03 LOG7[6658:139940568905472]: SSL state (accept): SSLv3 flush data 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 1 items in the session cache 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 client connects (SSL_connect()) 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 client connects that finished 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 client renegotiations requested 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 1 server connects (SSL_accept()) 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 1 server connects that finished 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 server renegotiations requested 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 session cache hits 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 external session cache hits 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 session cache misses 2015.02.09 10:00:03 LOG7[6658:139940568905472]: 0 session cache timeouts 2015.02.09 10:00:03 LOG6[6658:139940568905472]: SSL accepted: new session negotiated 2015.02.09 10:00:03 LOG6[6658:139940568905472]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2015.02.09 10:00:03 LOG7[6658:139940568905472]: FD 13 in non-blocking mode 2015.02.09 10:00:03 LOG6[6658:139940568905472]: local_bind succeeded on the original port 2015.02.09 10:00:03 LOG6[6658:139940568905472]: connect_blocking: connecting 127.0.0.1:10389 2015.02.09 10:00:03 LOG7[6658:139940568905472]: connect_blocking: s_poll_wait 127.0.0.1:10389: waiting 10 seconds 2015.02.09 10:00:13 LOG3[6658:139940568905472]: connect_blocking: s_poll_wait 127.0.0.1:10389: timeout 2015.02.09 10:00:13 LOG5[6658:139940568905472]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.02.09 10:00:13 LOG7[6658:139940568905472]: ldaps-in finished (0 left) Any idea why the timeout is occuring? Best regards, Shushant

1 0

New PGP key
by Michal Trojnara 06 Feb '15

06 Feb '15

Dear Users, As of now I'm starting to sign my emails and code with a new PGP key. The new key is attached to this email message, and available at https://www.stunnel.org/pgp.asc Key fingerprint = AC91 5EA3 0645 D9D3 D4DA E4FE B104 8932 DD3A AAA3 The new key is also signed with my previous PGP key. This and other signatures can be verified with: gpg --check-sigs "AC91 5EA3 0645 D9D3 D4DA E4FE B104 8932 DD3A AAA3" Best regards, Mike

1 0

stunnel keeps using SSLv3 even after disabling it
by Or Yarimi 04 Feb '15

04 Feb '15

Hi, I'm using stunnel to communicate with FIX server. In order to do that, I disabled SSLv2 and SSLv3 and set the sslVersion to TLSv1. It seems like stunnel keeps trying using SSLv3 handshake, which isn't working. This is the configuration: client = yes debug = 7 output=stunnel.log cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Turning for LMAX options = NO_SSLv2 options = NO_SSLv3 [LMAX-fix-tunnel-DEMO-Trading] sslVersion = TLSv1 accept = 40001 connect = fix-ate.lmaxtrader.com:443 stunnel log: 2015.02.04 12:10:31 LOG7[12516]: Service [LMAX-fix-tunnel-DEMO-MktData] started 2015.02.04 12:10:31 LOG5[12516]: Service [LMAX-fix-tunnel-DEMO-MktData] accepted connection from 127.0.0.1:59475 2015.02.04 12:10:31 LOG6[12516]: s_connect: connecting 91.215.165.69:443 2015.02.04 12:10:31 LOG7[12516]: s_connect: s_poll_wait 91.215.165.69:443: waiting 10 seconds 2015.02.04 12:10:31 LOG5[12516]: s_connect: connected 91.215.165.69:443 2015.02.04 12:10:31 LOG5[12516]: Service [LMAX-fix-tunnel-DEMO-MktData] connected remote server from 10.0.0.62:59476 2015.02.04 12:10:31 LOG7[12516]: Remote socket (FD=620) initialized 2015.02.04 12:10:31 LOG6[12516]: SNI: sending servername: fix-md-ate.lmaxtrader.com 2015.02.04 12:10:31 LOG7[12516]: SSL state (connect): before/connect initialization 2015.02.04 12:10:31 LOG7[12516]: SSL state (connect): SSLv3 write client hello A Already burned around 4 hours understanding what I'm doing wrong, will be glad if you could help me. Thanks in advance, Or. -- *Attention:* This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender immediately by replying to this message, and delete the original message from your system without making a copy. This e-mail is attributed to the sender and does not necessarily reflect the view of Markets Pulse P.S. Ltd. or any affiliate. Please consider the environment before printing this email.

1 0

Can't compile stunnel 5.10 on Linux ... got fatal signal 11 error
by amontaron 03 Feb '15

03 Feb '15

Hi everybody ! I tried to compile stunnel 5.10 (latest) on my old Suse 7 Linux distrib and got "a fatal signal 11 error message" when doing the make command. Just before, openssl 1.0.2 (latest) compile fine with no errors. Also, I add some stuffs like xemacs 21.4.22 (latest) just to say that that rather old distrib is able to do all that :-D So, here is the latest messages from make I got : > Making all in src > make[1]: Entering directory `/root/stunnel-5.10/src' > make all-am > make[2]: Entering directory `/root/stunnel-5.10/src' > source='stunnel.c' object='stunnel-stunnel.o' libtool=no \ > DEPDIR=.deps depmode=gcc /bin/sh ../auto/depcomp \ > gcc -DHAVE_CONFIG_H -I. -I/usr/kerberos/include > -I/usr/local/ssl/include -DLIBDIR='"/usr/local/lib/stunnel"' > -DCONFDIR='"/usr/local/etc/stunnel"' -g -O2 -pthread -Wall > -Wformat=2 -Wconversion -Wno-long-long -Wno-deprecated-declarations > -D_FORTIFY_SOURCE=2 -c -o stunnel-stunnel.o `test -f 'stunnel.c' || > echo './'`stunnel.c > In file included from /usr/include/string.h:346, > from common.h:201, > from stunnel.c:38: > /usr/include/bits/string2.h: In function `__strsep_g': > /usr/include/bits/string2.h:1171: warning: passing arg 2 of > `__strpbrk_c2' with different width due to prototype > /usr/include/bits/string2.h:1171: warning: passing arg 3 of > `__strpbrk_c2' with different width due to prototype > /usr/include/bits/string2.h:1171: warning: passing arg 2 of > `__strpbrk_c3' with different width due to prototype > /usr/include/bits/string2.h:1171: warning: passing arg 3 of > `__strpbrk_c3' with different width due to prototype > /usr/include/bits/string2.h:1171: warning: passing arg 4 of > `__strpbrk_c3' with different width due to prototype > gcc: Internal compiler error: program cc1 got fatal signal 11 > make[2]: *** [stunnel-stunnel.o] Error 1 > make[2]: Leaving directory `/root/stunnel-5.10/src' > make[1]: *** [all] Error 2 > make[1]: Leaving directory `/root/stunnel-5.10/src' > make: *** [all-recursive] Error 1 Previously got lots of warning messages. Perhaps need "make report" also ? I've look at stunnel-users(a)stunnel.org mail archive up to July 2011 with no success. So, that's why I'm writting to you there... Then, I tried different versions of stunnel 4.xx like 4.00, 4.56, 4.28 and more. All simply don't compile with differents errors messages. The only one I could compile completly is stunnel 3.22 (so latest 3.xx) Note that I'm happy with that because I was running stunnel 3.3 just before and that everything works with the latest openssl version I download and everything works fine for what I would ! Remark: Suse7 distrib (not OpenSuse) is Linux 2.2.16 kernel (not latest :-D) Alex. PS: Another things, on the same machine I ran stunnel 4.56 on (old) Windows 98 with no problems. --- Ce courrier électronique ne contient aucun virus ou logiciel malveillant parce que la protection avast! Antivirus est active. http://www.avast.com

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users February 2015