September 2016 - stunnel-users

Requests to cloud server that requires host header
by Lorne Kates 13 Nov '24

13 Nov '24

(related to Akamai message from before-- but I have better troubleshooting information). I'm tying to route traffic through stunnel to a "cloud" based-endpoint. That endpoint has a static server name-- test.authorize.net. (This is the dev sandbox for auth.net) But if you do an nslookup on test.authorize.net, you'll get back a different servername and IP, because it's so wonderfully "cloud". Stunnel apparently tries to connect to the nslookup value. The server rejects the request because it can't route it back to test.authorize.net. I've tried adding "delay = yes" and "sni = test.authorize.net", but neither work. To see this in action, a simple setup with any accept, then connect to test.authorize.net:443 in client = yes mode. This is what a valid response looks like (13 -- give me the darn merchant ID in a POST): https://test.authorize.net/gateway/transact.dll This is what you'll get if you try to use stunnel (400 invalid url) : https://23.195.204.150/gateway/transact.dll So how can I get stunnel to send the proper Request Header (host: test.authorize.net) make sure it's using http/1.1, etc?

4 3

Stunnel 4 failing to connect to gmail
by Asif Iqbal 11 Dec '20

11 Dec '20

I am faling to connect to gmail. Not sure what that bind error means. iqbala@ghar:~$ sudo stunnel4 2008.12.15 13:53:17 LOG7[3839:3083650736]: Snagged 64 random bytes from /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: Wrote 1024 new random bytes to /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: RAND_status claims sufficient entropy for the PRNG 2008.12.15 13:53:17 LOG7[3839:3083650736]: PRNG seeded successfully 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: Key file: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Private key loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: SSL context initialized for service ssmtp 2008.12.15 13:53:17 LOG5[3839:3083650736]: stunnel 4.22 on i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2008.12.15 13:53:17 LOG5[3839:3083650736]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2008.12.15 13:53:17 LOG6[3839:3083650736]: file ulimit = 1024 (can be changed with 'ulimit -n') 2008.12.15 13:53:17 LOG6[3839:3083650736]: poll() used - no FD_SETSIZE limit for file descriptors 2008.12.15 13:53:17 LOG5[3839:3083650736]: 500 clients allowed 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 10 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 11 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 12 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: SO_REUSEADDR option set on accept socket 2008.12.15 13:53:17 LOG3[3839:3083650736]: Error binding ssmtp to 74.125.93.111:587 2008.12.15 13:53:17 LOG3[3839:3083650736]: bind: Cannot assign requested address (99) Here is how my conf file looks like iqbala@ghar:~$ cat /etc/stunnel/stunnel.conf | egrep -v "^;|^$" cert = /etc/stunnel/stunnel.pem foreground = yes sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes [ssmtp] accept = smtp.gmail.com:587 connect = 25 Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu

5 9

Stunnel & Gmail security
by BOXI31 TEST 16 Oct '20

16 Oct '20

Hi all, To make "Stunnel 5.31" work with Gmail, I have to go in security settings of Gmail and "allow less secure apps to access my account". Is it mandatory ? Is it possible to set Stunnel to access Gmail without lowering it security level ? How ? I checked in log file TLS v1.2 is used by Stunnel but Gmail still consider it as a "less secure app." ! Regards, Steve

2 1

Re: [stunnel-users] Public domain [PATCH] support environment variables in config file
by Dmitry Bakshaev 21 Dec '16

21 Dec '16

2016-05-31 12:02 GMT+04:00 Pierre Delaage <delaage.pierre(a)free.fr>: > Did not have a look at the code yet, but should it be possible to replace > envvars usage by some keys in the registry on windows platform and/or > %userprofile%/config-file ? > > Anyway, my opinion on the patch is that there is no real interest for > "generic/self-expanding" config file , and it is even dangerous : > I would not trust stunnel if, at run time, its config could be modified by > USER envvars... > which difference between %userprofile%/config-file and USER envvars? both are USER owned and USER controlled. certificate and keys also USER private data. and stunnel started by USER owned by USER. if stunnel started by SYSTEM/ADMIN he uses SYSTEM/ADMIN envvars (if needed), certs, keys, etc. global "generic/self-expanding" config file is ADMIN owned. USER has permissions to substitute some values, restricted by ADMIN.

2 10

No cert?
by Dave Gradwell 27 Sep '16

27 Sep '16

Is there any way to configure a Stunnel server so that it doesn’t require a cert at all? I implement peer authentication using other means; I just want session encryption from Stunnel. Ideally, I’d like keys to be generated on-the-fly for each new connection. I don’t mind if this takes a few seconds… Thanks, Dave.

1 0

Re: [stunnel-users] Hangs when connecting -- advice pls
by Scott McKeown 21 Sep '16

21 Sep '16

Hi Guys, To me this looks like a cipher issue. There are a few options that you can try to resolve this if it is. I would try adding the following lines into your STunnel Configuration file: delay = yes options = NO_SSLv2 options = NO_SSLv3 options = NO_TLSv1 options = CIPHER_SERVER_PREFERENCE options = DONT_INSERT_EMPTY_FRAGMENTS Delay will delay and DNS lookups that maybe actioned by the request (not normally needed but I always include if for sanity sake) The three 'options' sections turn off all the known problematic cipher lists if you need a key that is in one of these block feel free to remove that directive but I think a good start would be to leave the 'NO_SSLv3' option in place The 'CIPHER_SERVER_PREFERENCE' option will make set whether the client is allowed to renegotiat the ciphers that are to be used between the client and the server process. And finally 'DONT_INSERT_EMPTY_FRAGMENTS' will mitigate an issue in the CBC ciphers that was in the SSLv3 and TLS1.0 cipher lists again I only include it for sanity sake now but its better to have than to go without. -- With Kind Regards. Scott McKeown Loadbalancer.org http://www.loadbalancer.org Tel (UK) - +44 (0) 3303801064 (24x7) Tel (US) - +1 888.867.9504 (Toll Free)(24x7)

2 1

Re: [stunnel-users] stunnel-users Digest, Vol 146, Issue 10
by Hon Quach 16 Sep '16

16 Sep '16

Can I be please removed from the mailing list? Sent from my iPhone > On Sep 16, 2016, at 12:14 PM, stunnel-users-request(a)stunnel.org wrote: > > Send stunnel-users mailing list submissions to > stunnel-users(a)stunnel.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)stunnel.org > > You can reach the person managing the list at > stunnel-users-owner(a)stunnel.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. Re: compilation error with stunnel-5.35 (Josealf.rm) > 2. Re: compilation error with stunnel-5.35 (Viorel Panaite) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 16 Sep 2016 13:04:09 -0500 > From: "Josealf.rm" <josealf(a)rocketmail.com> > To: Viorel Panaite <Viorel.Panaite(a)tecsys.com> > Cc: "stunnel-users(a)stunnel.org" <stunnel-users(a)stunnel.org> > Subject: Re: [stunnel-users] compilation error with stunnel-5.35 > Message-ID: <6CE9A3F0-EE74-4CF0-ACCE-C5941B6B40A2(a)rocketmail.com> > Content-Type: text/plain; charset="utf-8" > > > Visorel, > > Did you compile OpenSSL yourself? Did you enable shared library support? > Maybe you system is picking system installed OpenSSL headers (0.9.8) instead of the new ones. > > Regards > Jose > > > Enviado desde mi iPhone >> El 16/09/2016, a las 9:39 a.m., Viorel Panaite <Viorel.Panaite(a)tecsys.com> escribió: >> >> I downloaded stunnel-5.35 and I’m trying to compile using openssl-1.0.2h on RedHat EL linux 5.4 >> >> I get this error when I’m trying to compile them together, >> >> Configure log >> ./configure --prefix=/apps/stunnel/535 --with-ssl=/apps/openssl/1.0.2h/ >> ……………………. >> hecking for broken poll() implementation... no >> checking for pipe2... no >> checking for accept4... no >> configure: **************************************** optional features >> checking whether to enable IPv6 support... yes (default) >> checking whether to enable FIPS support... autodetecting >> checking whether to enable systemd socket activation support... autodetecting >> checking for library containing sd_listen_fds... no >> configure: systemd library not found >> checking whether to enable TCP wrappers support... autodetecting >> checking for hosts_access in -lwrap... yes >> configure: libwrap support enabled >> configure: **************************************** SSL >> checking for compiler sysroot... / >> checking for SSL directory... /apps/openssl/1.0.2h/ >> checking for FIPS_mode_set... yes >> configure: FIPS support enabled >> configure: **************************************** write the results >> checking that generated files are newer than configure... done >> configure: creating ./config.status >> config.status: creating Makefile >> config.status: creating src/Makefile >> config.status: creating doc/Makefile >> config.status: creating tools/Makefile >> config.status: creating src/config.h >> config.status: src/config.h is unchanged >> config.status: executing depfiles commands >> config.status: executing libtool commands >> configure: **************************************** success >> >> make log >> >> [root@mybox stunnel-5.35]# make >> Making all in src >> make[1]: Entering directory `/apps/stunnel/stunnel-5.35/src' >> make all-am >> make[2]: Entering directory `/apps/stunnel/stunnel-5.35/src' >> CCLD stunnel >> /usr/bin/ld: skipping incompatible /apps/openssl/1.0.2h//lib/libssl.a when searching for -lssl >> /usr/bin/ld: skipping incompatible /apps/openssl/1.0.2h//lib/libcrypto.a when searching for -lcrypto >> stunnel-client.o: In function `client_run': >> /apps/stunnel/stunnel-5.35/src/client.c:201: undefined reference to `ERR_remove_thread_state' >> stunnel-options.o: In function `parse_service_option': >> /apps/stunnel/stunnel-5.35/src/options.c:2669: undefined reference to `TLSv1_2_client_method' >> /apps/stunnel/stunnel-5.35/src/options.c:2670: undefined reference to `TLSv1_2_server_method' >> /apps/stunnel/stunnel-5.35/src/options.c:2662: undefined reference to `TLSv1_1_client_method' >> /apps/stunnel/stunnel-5.35/src/options.c:2663: undefined reference to `TLSv1_1_server_method' >> stunnel-ctx.o: In function `auth_init': >> /apps/stunnel/stunnel-5.35/src/ctx.c:442: undefined reference to `SSL_CTX_set_psk_server_callback' >> stunnel-ctx.o: In function `context_init': >> /apps/stunnel/stunnel-5.35/src/ctx.c:133: undefined reference to `SSL_CTX_set_client_cert_engine' >> stunnel-ctx.o: In function `auth_init': >> /apps/stunnel/stunnel-5.35/src/ctx.c:440: undefined reference to `SSL_CTX_set_psk_client_callback' >> stunnel-ctx.o: In function `conf_init': >> /apps/stunnel/stunnel-5.35/src/ctx.c:376: undefined reference to `SSL_CONF_CTX_new' >> /apps/stunnel/stunnel-5.35/src/ctx.c:381: undefined reference to `SSL_CONF_CTX_set_ssl_ctx' >> /apps/stunnel/stunnel-5.35/src/ctx.c:382: undefined reference to `SSL_CONF_CTX_set_flags' >> /apps/stunnel/stunnel-5.35/src/ctx.c:383: undefined reference to `SSL_CONF_CTX_set_flags' >> /apps/stunnel/stunnel-5.35/src/ctx.c:385: undefined reference to `SSL_CONF_CTX_set_flags' >> /apps/stunnel/stunnel-5.35/src/ctx.c:392: undefined reference to `SSL_CONF_cmd' >> /apps/stunnel/stunnel-5.35/src/ctx.c:420: undefined reference to `SSL_CONF_CTX_finish' >> /apps/stunnel/stunnel-5.35/src/ctx.c:422: undefined reference to `SSL_CONF_CTX_free' >> stunnel-ctx.o: In function `ecdh_init': >> /apps/stunnel/stunnel-5.35/src/ctx.c:351: undefined reference to `EC_KEY_new_by_curve_name' >> /apps/stunnel/stunnel-5.35/src/ctx.c:359: undefined reference to `EC_KEY_free' >> stunnel-ctx.o: In function `conf_init': >> /apps/stunnel/stunnel-5.35/src/ctx.c:414: undefined reference to `SSL_CONF_CTX_free' >> /apps/stunnel/stunnel-5.35/src/ctx.c:409: undefined reference to `SSL_CONF_CTX_free' >> /apps/stunnel/stunnel-5.35/src/ctx.c:425: undefined reference to `SSL_CONF_CTX_free' >> stunnel-ctx.o: In function `servername_cb': >> /apps/stunnel/stunnel-5.35/src/ctx.c:229: undefined reference to `SSL_get_servername' >> /apps/stunnel/stunnel-5.35/src/ctx.c:253: undefined reference to `SSL_set_SSL_CTX' >> stunnel-verify.o: In function `ocsp_request': >> /apps/stunnel/stunnel-5.35/src/verify.c:499: undefined reference to `OCSP_CERTID_dup' >> stunnel-verify.o: In function `ocsp_get_response': >> /apps/stunnel/stunnel-5.35/src/verify.c:614: undefined reference to `OCSP_sendreq_new' >> /apps/stunnel/stunnel-5.35/src/verify.c:625: undefined reference to `OCSP_REQ_CTX_add1_header' >> /apps/stunnel/stunnel-5.35/src/verify.c:629: undefined reference to `OCSP_REQ_CTX_add1_header' >> /apps/stunnel/stunnel-5.35/src/verify.c:634: undefined reference to `OCSP_REQ_CTX_set1_req' >> /apps/stunnel/stunnel-5.35/src/verify.c:641: undefined reference to `OCSP_sendreq_nbio' >> /apps/stunnel/stunnel-5.35/src/verify.c:668: undefined reference to `OCSP_REQ_CTX_free' >> stunnel-verify.o: In function `cert_check_subject': >> /apps/stunnel/stunnel-5.35/src/verify.c:299: undefined reference to `X509_check_host' >> stunnel-verify.o: In function `ocsp_check': >> /apps/stunnel/stunnel-5.35/src/verify.c:457: undefined reference to `X509_get1_ocsp' >> stunnel-verify.o: In function `cert_check_subject': >> /apps/stunnel/stunnel-5.35/src/verify.c:312: undefined reference to `X509_check_email' >> /apps/stunnel/stunnel-5.35/src/verify.c:323: undefined reference to `X509_check_ip_asc' >> stunnel-verify.o: In function `cert_check_local': >> /apps/stunnel/stunnel-5.35/src/verify.c:356: undefined reference to `X509_STORE_get1_certs' >> stunnel-sthreads.o: In function `sthreads_init': >> /apps/stunnel/stunnel-5.35/src/sthreads.c:287: undefined reference to `CRYPTO_THREADID_set_callback' >> stunnel-sthreads.o: In function `threadid_func': >> /apps/stunnel/stunnel-5.35/src/sthreads.c:268: undefined reference to `CRYPTO_THREADID_set_numeric' >> collect2: ld returned 1 exit status >> make[2]: *** [stunnel] Error 1 >> make[2]: Leaving directory `/apps/stunnel/stunnel-5.35/src' >> make[1]: *** [all] Error 2 >> make[1]: Leaving directory `/apps/stunnel/stunnel-5.35/src' >> make: *** [all-recursive] Error 1 >> >> Thanks for your help. >> >> >> _______________________________________________ >> stunnel-users mailing list >> stunnel-users(a)stunnel.org >> https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users >

2 1

compilation error with stunnel-5.35
by Viorel Panaite 16 Sep '16

16 Sep '16

I downloaded stunnel-5.35 and I'm trying to compile using openssl-1.0.2h on RedHat EL linux 5.4 I get this error when I'm trying to compile them together, Configure log ./configure --prefix=/apps/stunnel/535 --with-ssl=/apps/openssl/1.0.2h/ ......................... hecking for broken poll() implementation... no checking for pipe2... no checking for accept4... no configure: **************************************** optional features checking whether to enable IPv6 support... yes (default) checking whether to enable FIPS support... autodetecting checking whether to enable systemd socket activation support... autodetecting checking for library containing sd_listen_fds... no configure: systemd library not found checking whether to enable TCP wrappers support... autodetecting checking for hosts_access in -lwrap... yes configure: libwrap support enabled configure: **************************************** SSL checking for compiler sysroot... / checking for SSL directory... /apps/openssl/1.0.2h/ checking for FIPS_mode_set... yes configure: FIPS support enabled configure: **************************************** write the results checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating tools/Makefile config.status: creating src/config.h config.status: src/config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands configure: **************************************** success make log [root@mybox stunnel-5.35]# make Making all in src make[1]: Entering directory `/apps/stunnel/stunnel-5.35/src' make all-am make[2]: Entering directory `/apps/stunnel/stunnel-5.35/src' CCLD stunnel /usr/bin/ld: skipping incompatible /apps/openssl/1.0.2h//lib/libssl.a when searching for -lssl /usr/bin/ld: skipping incompatible /apps/openssl/1.0.2h//lib/libcrypto.a when searching for -lcrypto stunnel-client.o: In function `client_run': /apps/stunnel/stunnel-5.35/src/client.c:201: undefined reference to `ERR_remove_thread_state' stunnel-options.o: In function `parse_service_option': /apps/stunnel/stunnel-5.35/src/options.c:2669: undefined reference to `TLSv1_2_client_method' /apps/stunnel/stunnel-5.35/src/options.c:2670: undefined reference to `TLSv1_2_server_method' /apps/stunnel/stunnel-5.35/src/options.c:2662: undefined reference to `TLSv1_1_client_method' /apps/stunnel/stunnel-5.35/src/options.c:2663: undefined reference to `TLSv1_1_server_method' stunnel-ctx.o: In function `auth_init': /apps/stunnel/stunnel-5.35/src/ctx.c:442: undefined reference to `SSL_CTX_set_psk_server_callback' stunnel-ctx.o: In function `context_init': /apps/stunnel/stunnel-5.35/src/ctx.c:133: undefined reference to `SSL_CTX_set_client_cert_engine' stunnel-ctx.o: In function `auth_init': /apps/stunnel/stunnel-5.35/src/ctx.c:440: undefined reference to `SSL_CTX_set_psk_client_callback' stunnel-ctx.o: In function `conf_init': /apps/stunnel/stunnel-5.35/src/ctx.c:376: undefined reference to `SSL_CONF_CTX_new' /apps/stunnel/stunnel-5.35/src/ctx.c:381: undefined reference to `SSL_CONF_CTX_set_ssl_ctx' /apps/stunnel/stunnel-5.35/src/ctx.c:382: undefined reference to `SSL_CONF_CTX_set_flags' /apps/stunnel/stunnel-5.35/src/ctx.c:383: undefined reference to `SSL_CONF_CTX_set_flags' /apps/stunnel/stunnel-5.35/src/ctx.c:385: undefined reference to `SSL_CONF_CTX_set_flags' /apps/stunnel/stunnel-5.35/src/ctx.c:392: undefined reference to `SSL_CONF_cmd' /apps/stunnel/stunnel-5.35/src/ctx.c:420: undefined reference to `SSL_CONF_CTX_finish' /apps/stunnel/stunnel-5.35/src/ctx.c:422: undefined reference to `SSL_CONF_CTX_free' stunnel-ctx.o: In function `ecdh_init': /apps/stunnel/stunnel-5.35/src/ctx.c:351: undefined reference to `EC_KEY_new_by_curve_name' /apps/stunnel/stunnel-5.35/src/ctx.c:359: undefined reference to `EC_KEY_free' stunnel-ctx.o: In function `conf_init': /apps/stunnel/stunnel-5.35/src/ctx.c:414: undefined reference to `SSL_CONF_CTX_free' /apps/stunnel/stunnel-5.35/src/ctx.c:409: undefined reference to `SSL_CONF_CTX_free' /apps/stunnel/stunnel-5.35/src/ctx.c:425: undefined reference to `SSL_CONF_CTX_free' stunnel-ctx.o: In function `servername_cb': /apps/stunnel/stunnel-5.35/src/ctx.c:229: undefined reference to `SSL_get_servername' /apps/stunnel/stunnel-5.35/src/ctx.c:253: undefined reference to `SSL_set_SSL_CTX' stunnel-verify.o: In function `ocsp_request': /apps/stunnel/stunnel-5.35/src/verify.c:499: undefined reference to `OCSP_CERTID_dup' stunnel-verify.o: In function `ocsp_get_response': /apps/stunnel/stunnel-5.35/src/verify.c:614: undefined reference to `OCSP_sendreq_new' /apps/stunnel/stunnel-5.35/src/verify.c:625: undefined reference to `OCSP_REQ_CTX_add1_header' /apps/stunnel/stunnel-5.35/src/verify.c:629: undefined reference to `OCSP_REQ_CTX_add1_header' /apps/stunnel/stunnel-5.35/src/verify.c:634: undefined reference to `OCSP_REQ_CTX_set1_req' /apps/stunnel/stunnel-5.35/src/verify.c:641: undefined reference to `OCSP_sendreq_nbio' /apps/stunnel/stunnel-5.35/src/verify.c:668: undefined reference to `OCSP_REQ_CTX_free' stunnel-verify.o: In function `cert_check_subject': /apps/stunnel/stunnel-5.35/src/verify.c:299: undefined reference to `X509_check_host' stunnel-verify.o: In function `ocsp_check': /apps/stunnel/stunnel-5.35/src/verify.c:457: undefined reference to `X509_get1_ocsp' stunnel-verify.o: In function `cert_check_subject': /apps/stunnel/stunnel-5.35/src/verify.c:312: undefined reference to `X509_check_email' /apps/stunnel/stunnel-5.35/src/verify.c:323: undefined reference to `X509_check_ip_asc' stunnel-verify.o: In function `cert_check_local': /apps/stunnel/stunnel-5.35/src/verify.c:356: undefined reference to `X509_STORE_get1_certs' stunnel-sthreads.o: In function `sthreads_init': /apps/stunnel/stunnel-5.35/src/sthreads.c:287: undefined reference to `CRYPTO_THREADID_set_callback' stunnel-sthreads.o: In function `threadid_func': /apps/stunnel/stunnel-5.35/src/sthreads.c:268: undefined reference to `CRYPTO_THREADID_set_numeric' collect2: ld returned 1 exit status make[2]: *** [stunnel] Error 1 make[2]: Leaving directory `/apps/stunnel/stunnel-5.35/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/apps/stunnel/stunnel-5.35/src' make: *** [all-recursive] Error 1 Thanks for your help.

2 2

Hangs when connecting -- advice pls
by Dave Gradwell 14 Sep '16

14 Sep '16

My Stunnel client gets to this point, then hangs indefinitely: SSL state (connect): SSLv2/v3 write client hello A Is this a fault with Stunnel or is it something I’m doing wrong Full client-side output: """"""""""""""""""" Last login: Wed Sep 14 06:50:40 on ttys004 Daves-MBP-2016:~ dave$ /Users/dave/Desktop/stunnel-test/stunnel /Users/dave/Desktop/stunnel-test/stunnel-sender.conf 2016.09.14 06:54:35 LOG7[ui]: Clients allowed=125 2016.09.14 06:54:35 LOG7[cron]: Cron thread initialized 2016.09.14 06:54:35 LOG5[ui]: stunnel 5.35 on x86_64-apple-darwin15.4.0 platform 2016.09.14 06:54:35 LOG5[ui]: Compiled with OpenSSL 0.9.8zd 8 Jan 2015 2016.09.14 06:54:35 LOG5[ui]: Running with OpenSSL 0.9.8zh 14 Jan 2016 2016.09.14 06:54:35 LOG5[ui]: Update OpenSSL shared libraries or rebuild stunnel 2016.09.14 06:54:35 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,SNI 2016.09.14 06:54:35 LOG7[ui]: errno: (*__error()) 2016.09.14 06:54:35 LOG5[ui]: Reading configuration from file /Users/dave/Desktop/stunnel-test/stunnel-sender.conf 2016.09.14 06:54:35 LOG5[ui]: UTF-8 byte order mark not detected 2016.09.14 06:54:35 LOG7[ui]: Compression disabled 2016.09.14 06:54:35 LOG7[ui]: Snagged 64 random bytes from /Users/dave/.rnd 2016.09.14 06:54:35 LOG7[ui]: Wrote 1024 new random bytes to /Users/dave/.rnd 2016.09.14 06:54:35 LOG7[ui]: PRNG seeded successfully 2016.09.14 06:54:35 LOG6[ui]: Initializing inetd mode configuration 2016.09.14 06:54:35 LOG6[ui]: Loading certificate from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: Certificate loaded from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: Loading private key from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG4[ui]: Insecure file permissions on /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: Private key loaded from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG7[ui]: Private key check succeeded 2016.09.14 06:54:35 LOG4[ui]: Service [stunnel] needs authentication to prevent MITM attacks 2016.09.14 06:54:35 LOG7[ui]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.09.14 06:54:35 LOG5[ui]: Configuration successful 2016.09.14 06:54:35 LOG7[ui]: Service [stunnel] started 2016.09.14 06:54:35 LOG5[ui]: Service [stunnel] accepted connection 2016.09.14 06:54:35 LOG6[ui]: failover: round-robin, starting at entry #0 2016.09.14 06:54:35 LOG6[ui]: s_connect: connecting ::1:874 2016.09.14 06:54:35 LOG7[ui]: s_connect: s_poll_wait ::1:874: waiting 10 seconds 2016.09.14 06:54:35 LOG5[ui]: s_connect: connected ::1:874 2016.09.14 06:54:35 LOG5[ui]: Service [stunnel] connected remote server from ::1:51362 2016.09.14 06:54:35 LOG7[ui]: Option TCP_NODELAY set on remote socket 2016.09.14 06:54:35 LOG7[ui]: Remote descriptor (FD=3) initialized 2016.09.14 06:54:35 LOG6[ui]: SNI: sending servername: localhost 2016.09.14 06:54:35 LOG6[ui]: Peer certificate not required 2016.09.14 06:54:35 LOG7[ui]: SSL state (connect): before/connect initialization 2016.09.14 06:54:35 LOG7[ui]: SSL state (connect): SSLv2/v3 write client hello A ^C Daves-MBP-2016:~ dave$ """"""""""""""""""" My stunnel-sender.conf: """"""""""""""""""" debug = 7 output = /Users/dave/Desktop/stunnel-test/sender-stunnel-output.log foreground = yes client = yes connect = localhost:874 cert = /Users/dave/Desktop/stunnel-test/cert.pem verify = 0 """"""""""""""""""" My stunnel-receiver.conf: """"""""""""""""""" debug = 7 output = /Users/dave/Desktop/stunnel-test/receiver-stunnels-output.log pid = /Users/dave/Desktop/stunnel-test/stunnel-rsyncd-stunnels.pid cert = /Users/dave/Desktop/stunnel-test/cert.pem verify = 0 delay = yes exec = /Users/dave/Desktop/stunnel-test/rsync execArgs = -vvvv --daemon --server --config=/Users/dave/Desktop/stunnel-test/stunnel-rsyncd.conf . foreground = yes client = no """"""""""""""""""" My receiver-error.log: """"""""""""""""""" 2016.09.14 06:54:35 LOG7[ui]: Clients allowed=125 2016.09.14 06:54:35 LOG7[cron]: Cron thread initialized 2016.09.14 06:54:35 LOG5[ui]: stunnel 5.35 on x86_64-apple-darwin15.4.0 platform 2016.09.14 06:54:35 LOG5[ui]: Compiled with OpenSSL 0.9.8zd 8 Jan 2015 2016.09.14 06:54:35 LOG5[ui]: Running with OpenSSL 0.9.8zh 14 Jan 2016 2016.09.14 06:54:35 LOG5[ui]: Update OpenSSL shared libraries or rebuild stunnel 2016.09.14 06:54:35 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,SNI 2016.09.14 06:54:35 LOG7[ui]: errno: (*__error()) 2016.09.14 06:54:35 LOG5[ui]: Reading configuration from file /Users/dave/Desktop/stunnel-test/stunnel-receiver.conf 2016.09.14 06:54:35 LOG5[ui]: UTF-8 byte order mark not detected 2016.09.14 06:54:35 LOG7[ui]: Compression disabled 2016.09.14 06:54:35 LOG7[ui]: Snagged 64 random bytes from /dev/urandom 2016.09.14 06:54:35 LOG7[ui]: PRNG seeded successfully 2016.09.14 06:54:35 LOG6[ui]: Initializing inetd mode configuration 2016.09.14 06:54:35 LOG6[ui]: Loading certificate from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: Certificate loaded from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: Loading private key from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG4[ui]: Insecure file permissions on /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: Private key loaded from file: /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG7[ui]: Private key check succeeded 2016.09.14 06:54:35 LOG7[ui]: DH initialization 2016.09.14 06:54:35 LOG7[ui]: Using DH parameters from /Users/dave/Desktop/stunnel-test/cert.pem 2016.09.14 06:54:35 LOG6[ui]: 2048-bit DH parameters loaded 2016.09.14 06:54:35 LOG7[ui]: ECDH initialization 2016.09.14 06:54:35 LOG7[ui]: ECDH initialized with curve prime256v1 2016.09.14 06:54:35 LOG7[ui]: SSL options: 0x03004004 (+0x03004000, -0x00000000) 2016.09.14 06:54:35 LOG5[ui]: Configuration successful 2016.09.14 06:54:35 LOG7[ui]: Service [stunnel] started 2016.09.14 06:54:35 LOG7[ui]: Option TCP_NODELAY set on local socket 2016.09.14 06:54:35 LOG5[ui]: Service [stunnel] accepted connection from ::1:51362 2016.09.14 06:54:35 LOG6[ui]: Peer certificate not required 2016.09.14 06:54:35 LOG7[ui]: SSL state (accept): before/accept initialization 2016.09.14 06:54:35 LOG7[ui]: SNI: no virtual services defined 2016.09.14 06:54:35 LOG7[ui]: SSL state (accept): SSLv3 read client hello A 2016.09.14 06:54:35 LOG7[ui]: SSL state (accept): SSLv3 write server hello A 2016.09.14 06:54:35 LOG7[ui]: SSL state (accept): SSLv3 write certificate A 2016.09.14 06:54:35 LOG7[ui]: SSL state (accept): SSLv3 write certificate request A 2016.09.14 06:54:35 LOG7[ui]: SSL state (accept): SSLv3 flush data 2016.09.14 06:54:40 LOG3[ui]: SSL_accept: Peer suddenly disconnected 2016.09.14 06:54:40 LOG5[ui]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2016.09.14 06:54:40 LOG7[ui]: Deallocating application specific data for addr index 2016.09.14 06:54:40 LOG7[ui]: Service [stunnel] finished (0 left) """"""""""""""""""" The server-side-Stunnel is invoked via launchd using this LaunchDaemon (but this seems to be working okay — I think): """"""""""""""""""" <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Disabled</key> <false/> <key>StandardErrorPath</key> <string>/Users/dave/Desktop/stunnel-test/receiver-error.log</string> <key>StandardOutPath</key> <string>/Users/dave/Desktop/stunnel-test/receiver-out.log</string> <key>Label</key> <string>com.stunnel.test</string> <key>ProgramArguments</key> <array> <string>/Users/dave/Desktop/stunnel-test/stunnel</string> <string>/Users/dave/Desktop/stunnel-test/stunnel-receiver.conf</string> </array> <key>inetdCompatibility</key> <dict> <key>Wait</key> <false/> </dict> <key>Sockets</key> <dict> <key>Listeners</key> <dict> <key>SockServiceName</key> <string>874</string> <key>SockType</key> <string>stream</string> </dict> </dict> </dict> </plist> """"""""""""""""""" I’ve looked at the output of bash-3.2# tcpdump -i all -XX -xx -vv port 874 but this didn’t give me any obvious clues. I can send it if it’s useful but I’ve omitted it for now as it’s long. I’ve reproduced the same hang on Mac OS X 10.11 and 10.6. I’ve recompiled Stunnel in 10.11 and 10.9 environments but still get this same hang. Any advice appreciated.. — Dave.

1 0

Re: [stunnel-users] stunnel 5.x no answer in server mode?
by Ulli Horlacher 14 Sep '16

14 Sep '16

On Tue 2016-09-13 (22:25), Micha?? Trojnara wrote: > On 13.09.2016 20:35, Ulli Horlacher wrote: > >> It is impossible to say anything without analysis of the executed fexsrv > >> program. > > > > The problem cannot be in fexsrv, because it works with stunnel 4.27 > > What is the point of sending an email to the mailing list when you > ignore our effort to help you? Where do I ignore help? > fexsrv terminates immediately with exit code 1. No. It does not start at all, so it does not terminate. fexsrv logs everything and when running with stunnel 5.x the log file is empty. But meanwhile I found the error: stunnel 5.x needs the a full path for the exec statement: exec = /usr/bin/perl For stunnel 4.x it was sufficent to use: exec = perl -- Ullrich Horlacher Server und Virtualisierung Rechenzentrum TIK Universitaet Stuttgart E-Mail: horlacher(a)tik.uni-stuttgart.de Allmandring 30a Tel: ++49-711-68565868 70569 Stuttgart (Germany) WWW: http://www.tik.uni-stuttgart.de/ REF:<45835cd9-b239-d80c-38a0-3f978132e40e(a)stunnel.org>

2 1