stunnel-users August 2017

stunnel-users@stunnel.org

4 participants
6 discussions

Requests to cloud server that requires host header
by Lorne Kates 13 Nov '24

13 Nov '24

(related to Akamai message from before-- but I have better troubleshooting information). I'm tying to route traffic through stunnel to a "cloud" based-endpoint. That endpoint has a static server name-- test.authorize.net. (This is the dev sandbox for auth.net). But if you do an nslookup on test.authorize.net, you'll get back a different servername and IP, because it's so wonderfully "cloud". Stunnel apparently tries to connect to the nslookup value. The server rejects the request because it can't route it back to test.authorize.net. I've tried adding "delay = yes" and "sni = test.authorize.net", but neither work. To see this in action, a simple setup with any accept, then connect to test.authorize.net:443 in client = yes mode. This is what a valid response looks like (13 -- give me the darn merchant ID in a POST): https://test.authorize.net/gateway/transact.dll This is what you'll get if you try to use stunnel (400 invalid url) : https://23.195.204.150/gateway/transact.dll So how can I get stunnel to send the proper Request Header (host: test.authorize.net), make sure it's using http/1.1, etc?

4 3

Stunnel 4 failing to connect to gmail
by Asif Iqbal 11 Dec '20

11 Dec '20

I am faling to connect to gmail. Not sure what that bind error means. iqbala@ghar:~$ sudo stunnel4 2008.12.15 13:53:17 LOG7[3839:3083650736]: Snagged 64 random bytes from /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: Wrote 1024 new random bytes to /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: RAND_status claims sufficient entropy for the PRNG 2008.12.15 13:53:17 LOG7[3839:3083650736]: PRNG seeded successfully 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: Key file: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Private key loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: SSL context initialized for service ssmtp 2008.12.15 13:53:17 LOG5[3839:3083650736]: stunnel 4.22 on i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2008.12.15 13:53:17 LOG5[3839:3083650736]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2008.12.15 13:53:17 LOG6[3839:3083650736]: file ulimit = 1024 (can be changed with 'ulimit -n') 2008.12.15 13:53:17 LOG6[3839:3083650736]: poll() used - no FD_SETSIZE limit for file descriptors 2008.12.15 13:53:17 LOG5[3839:3083650736]: 500 clients allowed 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 10 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 11 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 12 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: SO_REUSEADDR option set on accept socket 2008.12.15 13:53:17 LOG3[3839:3083650736]: Error binding ssmtp to 74.125.93.111:587 2008.12.15 13:53:17 LOG3[3839:3083650736]: bind: Cannot assign requested address (99) Here is how my conf file looks like iqbala@ghar:~$ cat /etc/stunnel/stunnel.conf | egrep -v "^;|^$" cert = /etc/stunnel/stunnel.pem foreground = yes sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes [ssmtp] accept = smtp.gmail.com:587 connect = 25 Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu

5 9

Stunnel & Gmail security
by BOXI31 TEST 17 Oct '20

17 Oct '20

Hi all, To make "Stunnel 5.31" work with Gmail, I have to go in security settings of Gmail and "allow less secure apps to access my account". Is it mandatory ? Is it possible to set Stunnel to access Gmail without lowering it security level ? How ? I checked in log file TLS v1.2 is used by Stunnel but Gmail still consider it as a "less secure app." ! Regards, Steve

2 1

Stunnel Config Error
by Jay Jenney 21 Aug '17

21 Aug '17

Trying to see why Stunnel like this config file (attached) for an office365 email account [cid:image001.jpg@01D31A6F.5FD0FC60] Harriscomputer Register today<http://www.harriscomputer.com/en/conference/> for HCTC2017 - Early Bird deadline is August 31! Jay Jenney Support Specialist P: 800-274-2911 x64272 F: E: jjenney(a)caliberpublicsafety.com [cid:Caliber_PS_left_CMYK_247aef3c-9961-4e6c-a9f4-053e52f0093f.jpg] , Iowa www.caliberpublicsafety.com<http://www.caliberpublicsafety.com> This message has been sent on behalf of a company that is part of the Harris Operating Group of Constellation Software Inc. These companies are listed at the following link: http://subscribe.harriscomputer.com Unsubscribe Option: If you do not wish to receive any future email, please unsubscribe by clicking on the following link:http://subscribe.harriscomputer.com This message is intended exclusively for the individual or entity to which it is addressed. This communication may contain information that is proprietary, privileged or confidential or otherwise legally exempt from disclosure. If you are not the named addressee, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this message in error, please notify the sender immediately by e-mail and delete all copies of the message.

1 0

stunnel w & w/o data compression
by Daniele Basaldella 18 Aug '17

18 Aug '17

Dear all, I use stunnel in clinet configuration to get data feeds from several sources. Until now none of them requested data compression, so the configuration was easy. Now I need to connect to a new data feeder that requires zlib compression. I found the compression method is a global setting, so it will be not compatible with current setup. The server runs Ubuntu 16.04LTS, ker 4.4.0.92.lowlatency, stunnel 5.30, openssl 1.0.2.g. I looked for a solution on internet but seems no one have my issue. Someone could suggest how to get both compressed/uncompressed data feed connections on same system. Thank you Best Regards Daniele

2 1

Timeout issue I think
by Ben Bazian 16 Aug '17

16 Aug '17

I have a legacy server that uses IMAP but does not support TLS. I am using stunnel and since implementation I am getting errors when an email has a larger attachment. My application process these attachments and when done (sometimes can take 5-10 minutes) it marks the message for deletion. When all messages are completed it purges the emails from the box. My app is throwing an error when it tries to delete the message (see below). I think it may be due to stunnel closing the connection to the server? Not quite sure. javax.mail.FolderClosedException at com.sun.mail.imap.IMAPMessage.getProtocol(IMAPMessage.java:105) at com.sun.mail.imap.IMAPMessage.loadEnvelope(IMAPMessage.java:941) at com.sun.mail.imap.IMAPMessage.getSubject(IMAPMessage.java:238) at com.softlinx.docurouter.source.email.EmailSourceConnector.processMess ages(EmailSourceConnector.java:1213) at com.softlinx.docurouter.source.email.EmailSourceConnector.process(Ema ilSourceConnector.java:1455) at com.softlinx.docurouter.source.email.EmailSourceConnector.main(EmailS ourceConnector.java:1622) My configuration is pretty simple. I saw somewhere that I could put a timeoutidle on the connector but that does not seem to help. Any ideas are appreciated. Here is the config. # Stunnel configuration file for Office 365 SMTP and POP3 # Author: MessageOps, www.messageops.com<http://www.messageops.com> # GLOBAL OPTIONS client = yes output = /etc/stunnel/stunnel-log.txt debug=3 # taskbar=yes # SERVICE-LEVEL OPTIONS [POP3 Incoming] accept = 110 connect = outlook.office365.com:995 timeoutidle = 14400 [SMTP Outgoing] protocol = smtp accept = 25 connect = outlook.office365.com:587 [IMAP] accept = 143 connect = outlook.office365.com:993 timeoutidle = 14400 Here is a printout of the global options. Global options: debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = FIPS (with "fips = yes") ciphers = ALL:!SSLv2:!aNULL:!EXP:!LOW:-MEDIUM:RC4:+HIGH (with "fips = no") curve = prime256v1 sessionCacheSize = 1000 sessionCacheTimeout = 300 seconds sslVersion = TLSv1 (with "fips = yes") sslVersion = TLSv1 for client, all for server (with "fips = no") stack = 65536 bytes TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -Ben

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users August 2017