stunnel-users April 2021

stunnel-users@stunnel.org

17 participants
19 discussions

Requests to cloud server that requires host header
by Lorne Kates 13 Nov '24

13 Nov '24

(related to Akamai message from before-- but I have better troubleshooting information). I'm tying to route traffic through stunnel to a "cloud" based-endpoint. That endpoint has a static server name-- test.authorize.net. (This is the dev sandbox for auth.net). But if you do an nslookup on test.authorize.net, you'll get back a different servername and IP, because it's so wonderfully "cloud". Stunnel apparently tries to connect to the nslookup value. The server rejects the request because it can't route it back to test.authorize.net. I've tried adding "delay = yes" and "sni = test.authorize.net", but neither work. To see this in action, a simple setup with any accept, then connect to test.authorize.net:443 in client = yes mode. This is what a valid response looks like (13 -- give me the darn merchant ID in a POST): https://test.authorize.net/gateway/transact.dll This is what you'll get if you try to use stunnel (400 invalid url) : https://23.195.204.150/gateway/transact.dll So how can I get stunnel to send the proper Request Header (host: test.authorize.net), make sure it's using http/1.1, etc?

4 3

Re: [stunnel-users] CPU 100%
by Eric Eberhard 06 Nov '24

06 Nov '24

Long ago I had a server with a bad network card. Every once in a while it would spew uncontrollable bytes onto the network. If you open a stunnel connection and it does that this could very well be the problem. If it cheap, try changing the network card. If not, you should be able to look in your firewall/router and it will tell you who is sending what bytes to whomever. See if that machine is indeed streaming the bytes in massive quantities. If not, I would suspect your stunnel is getting stuck in it's own loop. There are a million reasons this can happen (well a few less than a million) - such as maybe a bad library in the FreeBSD or a bad choice in the Makefile - such as doing threads or something in a way your O/S does not like (I use threads=fork or whatever it is, instead of actual threading). You might tinker with some of the options that make the stunnel build and try different ones. Especially if stunnel was compiled on a different version of the O/S - could be differences in bytes in things and who knows what. That is all I can suggest beyond setting the debug level to 7 (I think is highest) and then watching the log file. Eric From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of Murrey, Brian J. Sent: Wednesday, October 17, 2018 10:57 AM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] CPU 100% We are running stunnel 5.49 on FreeBSD 11.2 and we're running into a problem once in a while. CPU pegs at 100% when we get an stunnel connection from one of our external devices. This affects 100% of all cores and we can't even log in to console. To mitigate this temporarily, we have a script running in the background to watch when stunnel begins to spike and restarts the daemon. It doesn't happen 100% of the time, and so far I have been unable to distinguish what makes the connection do this to the CPU. Have any of you run in to this issue? Sincerely, Brian Murrey System Engineer II, IT Infrastructure _____ NOTICE: This message may contain privileged and confidential information and/or protected health information intended solely for the use of the named recipient and may be privileged or otherwise protected by law. If you are not the intended recipient of this message, you should immediately notify the sender and delete this message. Do not disseminate, reproduce, or review this message or attachments if you are not the intended recipient. The sender or others may have legal rights restricting the dissemination of the information contained in this message and, as a result, remedies against you in the event of the improper dissemination of confidential information, trade secrets, personal information or privileged communications. This message is the work of the sender and does not necessarily reflect the position, views, or policies of TriMedx LLC or its affiliates. WARNING: The integrity and security of this message cannot be guaranteed and may contain or transmit a virus or other illicit code. Neither TriMedx LLC or its affiliates accept liability for any damage attributable to viruses or illicit code transmitted through this message or an attachment.

2 1

older browsers, stunnel and privoxy
by kovacs janos 04 Mar '24

04 Mar '24

sorry to bother, im trying to make older browsers be able to display TLS 1.1 and TLS 1.2 sites. i heard stunnel cant be configured to always forward to the current site address dynamically, thats why i would use privoxy. the browser is configured to send to: 127.0.0.1 443 stunnel config has this at the end: [Tunnel_in] client = yes accept = 127.0.0.1:443 connect = 127.0.0.1:8118 verifyChain = yes CAfile = ca-certs.pem checkHost = localhost 127.0.0.1:8118 is the privoxy address. this is what stunnel writes: LOG5[main]: Configuration successful LOG5[0]: Service [Tunnel_in] accepted connection from 127.0.0.1:3261 LOG5[0]: s_connect: connected 127.0.0.1:8118 LOG5[0]: Service [Tunnel_in] connected remote server from 127.0.0.1:3262 and the browser infinitely loads, and never loads anything or leaves the page. if i remove the last 3 lines, its the same just with this line added: LOG4[main]: Service [Tunnel_in] needs authentication to prevent MITM attacks but it doesnt give an error or anything. with a configuration like: [Tunnel_out] client = no accept = 127.0.0.1:443 connect = 127.0.0.1:8118 cert = stunnel.pem this is what it gives: LOG5[3]: Service [Tunnel_out] accepted connection from 127.0.0.1:3294 LOG3[3]: SSL_accept: 1407609B: error:1407609B:SSL routines:SSL23_GET_CLIENT_HELLO:https proxy request LOG5[3]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket and browser gives a server not found error immediately. im not even sure if i should use client or server configuration in a case like this, but none of them works anyway. all i would need is for my browser to get the pages decrypted, or at least in less than TLS1.1. like how on newipnow.com i can access sites with any encryption, since they are sent to the browser without encryption. the browser just gives an "unencrypted tunnel" warning, which is how i found stunnel, and which is exactly what i need, just locally.

8 41

TPM based mutual tls authentication
by Nyiri, Gabor (Nokia - HU/Budapest) 07 Nov '23

07 Nov '23

Hi, Can you help me how to configure stunnel client to use TPM for mutual TLS authentication? I want to connect with mTLS to a remote server then make this connection available for localhost without mTLS. Thanks for your help in advance! Here is my configuration so far without TPM: debug = debug output = /tmp/stunnel.log foreground = yes [mtls_client] client = yes accept = 127.0.0.1:12019 sni = server-with-mtls.example.com checkHost = server-with-mtls.example.com connect = 1.2.3.4:443 verifyChain = yes CApath = /etc/ssl/certs/ cert = client.crt key = client.key Thanks & br, Gábor Nyíri,

2 1

Stunnel static compile with open ssl error while running make command
by snainwar＠rediffmail.com 30 Apr '21

30 Apr '21

I am running RHEL release v 7.9 and have successfully compiled OpenSSL version 1.1.1k using the following configuration: ##> ./config --prefix=/usr/src/openssl-1.1.1 --openssldir=/etc/openssl The following paths are shown when I run command whereis openssl # whereis openssl openssl: /usr/lib64/openssl /usr/local/bin/openssl /usr/include/openssl /opt/openssl/bin/openssl /usr/src/openssl-1.1.1k/openssl.pc ]# I have download and prepared Stunnel version 5.59 from https://www.stunnel.org/ I am using the following configuration: ##> ./configure --with-ssl=/opt/openssl --enable-static When I compile Stunnel I get the following error message when we run Make install make[2]: Nothing to be done for `install-exec-am'. /bin/mkdir -p '/usr/local/share/doc/stunnel' /bin/install -c -m 644 README.md TODO.md COPYING.md AUTHORS.md NEWS.md PORTS.md BUGS.md COPYRIGHT.md CREDITS.md INSTALL.W32.md INSTALL.WCE.md INSTALL.FIPS.md '/usr/local/share/doc/stunnel' make install-data-hook make[3]: Entering directory `/usr/src/stunnel-5.59' ********************************************************* * Type 'make cert' to also install a sample certificate * ********************************************************* make[3]: Leaving directory `/usr/src/stunnel-5.59' make[2]: Leaving directory `/usr/src/stunnel-5.59' make[1]: Leaving directory `/usr/src/stunnel-5.59' [root@tvdcltmp001 stunnel-5.59]# Looks like Stunnel cannot link (probably because it can’t find the library) Does anyone know what the error might be? What changes do I need to make to configure for compilation.

1 0

5.59 on win64
by Joe Phillips 29 Apr '21

29 Apr '21

I'm running win64 version 5.59. Installed service and it is started and running (set to automatic). But when I try to open the stunnel allUsers I get the error : stunnel server is down sue to an error, you need to exit and correct the problem. Click ok to see the error log. Shouldn't I be able to open the log window if the service is running? Also when the service is running there is no stunnel icon in the system tray. Please advise. Thanks [cid:image001.png@01D73CD5.3C81D040]

1 0

Load Balancing
by Ramin Malekgahsemi 28 Apr '21

28 Apr '21

Hi Dear friend If have one stunnel client and have three Stunnel server My question IS How by RR user three server For client ? Forward and handle connection on three server (Client and access Port is once) thanks

1 0

Stunnel static compile error while running Make command
by snainwar＠rediffmail.com 28 Apr '21

28 Apr '21

We are trying to static compile stunnel 5.59 with open ssl 1.1.1 on RHEl 6 and RHEL7 we are getting below error running command Make on the server /stunnel-5.59/src/cron.c:239: undefined reference to `BN_GENCB_new' /stunnel-5.59/src/cron.c:244: undefined reference to `BN_GENCB_set' stunnel-cron.o: In function `cron_dh_param': /stunnel-5.59/src/cron.c:219: undefined reference to `CRYPTO_THREAD_write_lock' /stunnel-5.59/src/cron.c:222: undefined reference to `CRYPTO_THREAD_unlock' /stunnel-5.59/src/cron.c:225: undefined reference to `CRYPTO_THREAD_read_lock' /stunnel-5.59/src/cron.c:229: undefined reference to `CRYPTO_THREAD_unlock' stunnel-cron.o: In function `cron_init': /stunnel-5.59/src/cron.c:78: undefined reference to `CRYPTO_THREAD_write_lock' /stunnel-5.59/src/cron.c:81: undefined reference to `CRYPTO_THREAD_unlock' stunnel-stunnel.o: In function `main_cleanup': /stunnel-5.59/src/stunnel.c:249: undefined reference to `CRYPTO_THREAD_write_lock' /stunnel-5.59/src/stunnel.c:263: undefined reference to `CRYPTO_THREAD_unlock' stunnel-stunnel.o: In function `process_connections': /stunnel-5.59/src/stunnel.c:889: undefined reference to `CRYPTO_THREAD_write_lock' /stunnel-5.59/src/stunnel.c:898: undefined reference to `CRYPTO_THREAD_unlock' stunnel-stunnel.o: In function `stunnel_info': /stunnel-5.59/src/stunnel.c:1034: undefined reference to `OpenSSL_version' /stunnel-5.59/src/stunnel.c:1036: undefined reference to `OpenSSL_version' /stunnel-5.59/src/stunnel.c:1041: undefined reference to `OpenSSL_version_num' collect2: error: ld returned 1 exit status make[2]: *** [stunnel] Error 1 make[2]: Leaving directory `/stunnel-5.59/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/stunnel-5.59/src' make: *** [all-recursive] Error 1 [root@tvdcltmp001 stunnel-5.59]#

1 0

Stunnel static compile error while running Make command
by snainwar＠rediffmail.com 28 Apr '21

28 Apr '21

1 0

Unable to reload Stunnel in Linux
by gorf＠hyperfunk.club 27 Apr '21

27 Apr '21

Hi, Normally, I would call "kill -HUP" with Stunnel's process ID to make it reload the configuration in Linux. I was very surprised when I tried that and the process stopped. Why would HUP cause it to exit, rather than reload the config? It doesn't do that on every machine. Thanks.

2 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users April 2021