- stunnel-users - stunnel.org

server does not send its cert?
by Keresztfalvi Laszlo 14 Feb '12

14 Feb '12

Hello, after a day of trying.. - 2 box of *Win7 Pro x64* - fresh install of *stunnel 4.52* - keys generated with C:\Program Files (x86)\stunnel>* **.\openssl.exe req -new -x509 -days 365 -nodes -config stunnel.cnf -out stunnel.pem -keyout stunnel.pem* - *certs.pem* on both box contains certificate part of stunnel.pem from both machine server stunnel.conf (192.168.0.52): debug = 7 cert = stunnel.pem verify = 2 CAfile = certs.pem options = NO_SSLv2 [unison] accept = 10001 connect = 127.0.0.1:10000 client stunnel.conf (192.168.0.216): client = yes debug = 7 cert = stunnel.pem verify = 2 CAfile = certs.pem options = NO_SSLv2 [unison] client = yes accept = 127.0.0.1:10000 connect = 192.168.0.52:10001 Test #1: *OK* C:\Program Files (x86)\stunnel>* .\openssl verify -CAfile certs.pem stunnel.pem* *stunnel.pem: OK* C:\Program Files (x86)\stunnel>* .\openssl verify -CAfile certs.pem certs.pem* *certs.pem: OK* Test #2: *OK* C:\Program Files (x86)\stunnel> *.\openssl s_server -accept 10001 -cert stunnel.pem -verify 2 -CAfile certs.pem -no_ssl2* vs C:\Program Files (x86)\stunnel> *.\openssl s_client -connect 192.168.0.52:10001 -cert stunnel.pem -verify 2 -CAfile certs.pem -no_ssl2* Test #3: *OK - "certificate accepted" * C:\Program Files (x86)\stunnel> *.\openssl s_server -accept 10001 -cert stunnel.pem -verify 2 -CAfile certs.pem -no_ssl2* vs *stunnel client** * Test #4: *OK - "certificate accepted" * *stunnel server* vs C:\Program Files (x86)\stunnel> *.\openssl s_client -connect 192.168.0.52:10001 -cert stunnel.pem -verify 2 -CAfile certs.pem -no_ssl2* Test #5: *FAILED* *stunnel server* Service unison accepted connection from 192.168.0.216:23134 2012.02.14 09:02:39 LOG3[134028:132792]: SSL_accept: 140943F2: error:140943F2:SSL routines:*SSL3_READ_BYTES:sslv3 alert unexpected message* 2012.02.14 09:02:39 LOG5[134028:132792]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket* * vs *stunnel client * 2012.02.14 09:02:33 LOG5[2500:5876]: Service unison connected remote server from 192.168.0.216:23134 2012.02.14 09:02:33 LOG7[2500:5876]: Remote FD=372 initialized 2012.02.14 09:02:33 LOG3[2500:5876]: SSL_connect: 140870E8: error:140870E8:SSL routines:*SSL3_GET_CERTIFICATE_**REQUEST:tls client cert req with anon cipher* 2012.02.14 09:02:33 LOG5[2500:5876]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket After a *stunnel.conf **reload* on both box (yes, only a reload) then the following details and differences appear: *stunnel server* vs *openssl s_client : OK - "certificate accepted" * 2012.02.14 09:42:02 LOG5[134236:132440]: Service unison accepted connection from 192.168.0.216:23698 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): before/accept initialization 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 read client hello B 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): *SSLv3 write server hello A* 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): *SSLv3 write certificate A* 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): *SSLv3 write key exchange A* 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 write certificate request A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 flush data 2012.02.14 09:42:02 LOG7[134236:132440]: Starting certificate verification: depth=0, /C=HU/ST=Mazovia Province/L=Budapest/O=-/OU=client/CN=x-pc 2012.02.14 09:42:02 LOG5[134236:132440]: Certificate accepted: depth=0, /C=HU/ST=Mazovia Province/L=Budapest/O=-/OU=client/CN=x-pc 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 read client certificate A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 read client key exchange A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 read certificate verify A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 read finished A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 write session ticket A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 write change cipher spec A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 write finished A 2012.02.14 09:42:02 LOG7[134236:132440]: SSL state (accept): SSLv3 flush data *stunnel server* vs *stunnel client : FAILED * *server:* 2012.02.14 09:45:24 LOG5[134236:134552]: Service unison accepted connection from 192.168.0.216:23752 2012.02.14 09:45:24 LOG7[134236:134552]: SSL state (accept): before/accept initialization 2012.02.14 09:45:24 LOG7[134236:134552]: SSL state (accept): SSLv3 read client hello B 2012.02.14 09:45:24 LOG7[134236:134552]: SSL state (accept): *SSLv3 write server hello A* 2012.02.14 09:45:24 LOG7[134236:134552]: SSL state (accept): *SSLv3 write key exchange A* 2012.02.14 09:45:24 LOG7[134236:134552]: SSL state (accept): SSLv3 write certificate request A 2012.02.14 09:45:24 LOG7[134236:134552]: SSL state (accept): SSLv3 flush data 2012.02.14 09:45:24 LOG7[134236:134552]: SSL alert (read): fatal: unexpected_message 2012.02.14 09:45:24 LOG3[134236:134552]: SSL_accept: 140943F2: error:140943F2:SSL routines:*SSL3_READ_BYTES:sslv3 alert unexpected message* 2012.02.14 09:45:24 LOG5[134236:134552]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2012.02.14 09:45:24 LOG7[134236:134552]: Service unison finished (0 left) *client:* 2012.02.14 09:45:18 LOG5[1100:7176]: Service unison connected remote server from 192.168.0.216:23752 2012.02.14 09:45:18 LOG7[1100:7176]: Remote FD=452 initialized 2012.02.14 09:45:18 LOG7[1100:7176]: SSL state (connect): before/connect initialization 2012.02.14 09:45:18 LOG7[1100:7176]: SSL state (connect): SSLv3 write client hello A 2012.02.14 09:45:18 LOG7[1100:7176]: SSL state (connect): *SSLv3 read server hello A* 2012.02.14 09:45:18 LOG7[1100:7176]: SSL state (connect): *SSLv3 read server key exchange A* 2012.02.14 09:45:18 LOG7[1100:7176]: SSL alert (write): *fatal: unexpected_message* 2012.02.14 09:45:18 LOG3[1100:7176]: SSL_connect: 140870E8: error:140870E8:SSL routines:*SSL3_GET_CERTIFICATE_**REQUEST:tls client cert req with anon cipher* 2012.02.14 09:45:18 LOG5[1100:7176]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket Please, give me some clues. Thank you, Laszlo **

3 5

AUTO: Jean Daros is out of the office (returning 02/13/2012)
by Jean Daros 11 Feb '12

11 Feb '12

I am out of the office until 02/13/2012. If you need immediate assistance, please contact the helpdesk at ext. 1540. Thank you. Note: This is an automated response to your message "stunnel-users Digest, Vol 91, Issue 6" sent on 2/11/2012 6:00:01 AM. This is the only notification you will receive while this person is away.

1 0

(no subject)
by Jean Daros 08 Feb '12

08 Feb '12

We are using version 4.33 with RedRock Software - Tutortrac Stunnel will crash. The stunnel service terminated unexpectedly. Faulting application stunnel.exe, veraion 0.0.0.0, faulting module libeay32.dll, version 1.0.0.0 fault address 0x000731ee. Any ideas? -Jean Berkeley College

2 1

Improving SSL security and protecting against the BEAST attack
by Shannon Carver 06 Feb '12

06 Feb '12

Hi all, Long time lurker, but first time poster on the Stunnel mailing list. I'm currently entering into a business partnership with a prominent media group, and as such they've got some strict guidelines by which their partners should abide by when it comes to Security/Encryption, both for brand protection, and making sure that both sides are sufficiently covered (at least from a general scan point of view). Basically the big thing that is coming up in my testing now (predominantly using the Qualysis tool at www.ssllabs.com) is that I'm vulnerable to the BEAST attack, CBC-Mode vulnerabilities and a potential issue of DoS attack due to server accepting Client Side Re-negotiation. I've spent days now trawling the web looking for a solution, but haven't really found anything of use yet, short of disabling CBC Ciphers completely (e.g 'cipher = RC4-SHA:RC4-MD5:!SSLv2:!ADH:!EDH:!EXP:!aNULL:!eNULL:!NULL' or similar), but I fear this me be too restrictive when it comes to client support. I guess my question is, are there other stunnel users who've been in the same situation, and is there a recommended cipher/options list when using Stunnel for HTTPS? Thanks in advance Shannon

1 0

Re: [stunnel-users] No SSL handshake between stunnel in client mode and SSL server
by Michal Trojnara 06 Feb '12

06 Feb '12

On Wednesday, 1 of February 2012, Jose Alf. wrote: > Looks like your client connects for a very short time, sends just 1 byte, > the disconnects. > > Mike can correct me if I am wrong. [cut] > 2012.01.31 12:57:12 LOG6[6748:6808]: SSL connected: new session negotiated [cut] > 2012.01.31 12:57:22 LOG5[6748:6808]: Connection closed: 200 bytes sent to SSL, 1 bytes sent to socket 2012.01.31 12:57:22 As requested: The log says "SSL connected" (as opposed to "SSL accepted"), so this service was configured in client mode, so SSL=server side and socket=client side. 200 bytes sent to SSL were received from socket (i.e. client), and 1 byte sent to socket were received from SSL (i.e. server). Otherwise you are correct. Mike

2 1

No SSL handshake between stunnel in client mode and SSL server
by Denis Berezhnoy 02 Feb '12

02 Feb '12

Hi guys, I have a quick question. I am trying to use stunnel in client mode to encrypt traffic going to my server. Basically, I have a server which listens for SSL connection. And I have a client which can not do SSL but it needs to communicate with server over SSL. I setup stunnel in client mode to accept unecrypted traffic from client and redirect it to server over SSL. I checked TCP traffic with WireShark between stunnel and my server and I can see that there is no SSL handshake, stunnel makes TCP connection with server and sends some TCP packets but I expect to see SSL handshake. My stunnel conf file is here: [Router] client=yes accept = 192.168.1.121:55555 connect = 192.168.160.168:55443 Can you please comment on this? Best regards, Denis

2 5

Possible use-after-free in stunnel 4.52
by David Shaw 01 Feb '12

01 Feb '12

Hello, I am using stunnel 4.52 in client mode with exec and connect. The client program that stunnel execs periodically exits, and is properly re-started by stunnel, as I have "retry = yes" set. However, after a retry, I occasionally get a segfault inside one of the OpenSSL libraries. It does not happen right away, but once it happens, every retry causes the same segfault. I did some debugging and it seems that what is happening during a retry is that the SSL connection is brought down in client_run(), then is freed via SSL_free(c->ssl). However, it seems that c->ssl is used after this free, for example in connect_local(), which calls SSL_get_peer_certificate(c->ssl). When exec, connect, and retry are all set, client_main() will call connect_local() after client_run() exits. This patch seems to resolve the issue: --- client.c.orig 2012-01-11 10:43:33.000000000 -0500 +++ client.c 2012-01-31 18:02:19.155213010 -0500 @@ -162,6 +162,7 @@ if(c->ssl) { /* SSL initialized */ SSL_set_shutdown(c->ssl, SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN); SSL_free(c->ssl); + c->ssl=NULL; ERR_remove_state(0); } For completeness, here's my stunnel.conf: client = yes sslVersion = SSLv3 pid = /var/run/stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 foreground=yes [experiment] connect = x.x.x.x:443 exec = testprog retry = yes David

2 2

stunnel and connection alerts for Windows
by John A. Wallace 31 Jan '12

31 Jan '12

Hello. It would be helpful to me to see a little popup window notification of connections or data transfers made through Stunnel, a small and unobtrusive alert of such kind as not requiring me to open another Window, etc.. One thought I have along these lines is to have the stunnel Log Window to serve this purpose by having a configuration option for it to open in a small window by the system alert toolbar on the bottom right, providing a one-liner or abbreviated rendition of its current logging text. I do not know of a way to make this happen within stunnel itself, but if there is functionality of this sort already available, please advise. Another program that comes to mind with this sort of purpose would be Growl, which allows developers to make plugins to create this effect. http://www.growlforwindows.com/gfw/apps.aspx. Is there anyone else here who would find this useful or who is aware of work along these lines? Thanks. John

2 1

stunnel and local proxies
by John A. Wallace 30 Jan '12

30 Jan '12

Hello. At times I would like to have Stunnel (in Windows OS) running through a proxy on localhost, say, a socks proxy. Based on what I have seen and read here and in the list archives about that, although admittedly I have not yet read every single thread, I am inclined to say that it is not designed to do so easily if at all. Someone even suggested to me that these settings alone would allow running it over a socks proxy on my machine: ; these settings relate to using stunnel through a proxy ;protocol=connect ;protocolHost=127.0.0.1:portXYZ I tested this on my system but it failed to work. On the other hand I have had success using a program like socat for this purpose. Am I correct in thinking that the above settings alone are not going to do it or do I need additional settings with them for this purpose, or is it not going to work with Stunnel alone? Thanks.

1 0

Stunnel configuration to forward IP address
by Rajat Garg 30 Jan '12

30 Jan '12

Folks, I have done a setup where I am using Stunnel to forward incoming HTTPS requests to HaProxy. But, I am unable to get IP address at HaProxy level (determined by looking at logs) - Here is the configuration file for Stunnel - cert = /etc/stunnel/ssl.crt key = /etc/apache2/ssl.key/socialappshq.com.key sslVersion = all chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 CAfile = /etc/apache2/ssl.key/ca.pem output = /var/log/stunnel4/stunnel.log [proxy] accept = 443 connect = 81 TIMEOUTclose = 0 Here is the config file for HaProxy - global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy defaults log global option httplog option dontlognull mode http stats enable retries 3 option redispatch maxconn 2000 timeout client 40s # Client and server timeout must match the longest timeout server 40s # time we may wait for a response from the server. timeout queue 40s # Don't queue requests too long if saturated. timeout connect 20s # There's no reason to change this one. timeout http-request 30s # A complete request may never take that long. frontend webfarm_ssl *:81 accept-proxy option httpclose option forwardfor acl is_social hdr_dom(host) -i socialappshq.com use_backend socialappshq_ssl if is_social backend socialappshq_ssl balance roundrobin cookie JSESSIONID prefix option httpchk GET /check.txt HTTP/1.0 server web2 ec2-XX.us-west-1.compute.amazonaws.com:8080 cookie B check inter 2000 rise 2 fall 3 What else should I do so that IP address passes from Stunnel to Haproxy? Your help will be extremely appreciated. Thx Rajat Garg https://www.socialappshq.com

3 3