- stunnel-users - stunnel.org

Help using stunnel for the first time
by Ian Baxter 10 Sep '08

10 Sep '08

Hi, I'm trying to use stunnel for the first time (on Mac OS X 10.5), and I'm not having much luck. First of all, I downloaded the source and installed stunnel successfully. I then setup a config file as follows (where myhost is the host i am connecting to): client=yes verify=0 [psuedo-https] accept=1515 connect=myhost:443 TIMEOUTclose = 0 Then, I run the following on the command line: /usr/local/bin/stunnel ./stunnel.config It appears that stunnel runs without error, and if I do 'ps aux | grep stunnel' there are 4 stunnel processes running. Then, as a test, I try to connect to port 1515 from my web browser by visiting https://localhost:1515, but it just hangs there... nothing. Any suggestions? Thanks! Ian

1 0

Re: [stunnel-users] A Calypso user needs your help with stunnel
by John Bryant 09 Sep '08

09 Sep '08

Dear Ludolf et al: Thank you very much for your recent communication. I drew up what I thought I needed, based on your answer, in the configuration file. As might be expected in that I'm a novice at this, I still have a few more questions: 1. I tried it with and without the "Authentification stuff". Either way, after modifying stunnel.conf, and running stunnel.exe, stunnel.exe bombed with the following error: "Stunnel server down" (log said: ************** 2008.09.02 14:20:17 LOG7[16442455:16274811]: RAND_status claims sufficient entropy for the PRNG 2008.09.02 14:20:17 LOG7[16442455:16274811]: PRNG seeded successfully 2008.09.02 14:20:17 LOG3[16442455:16274811]: Error loading verify certificates from certs.pem 2008.09.02 14:20:17 LOG3[16442455:16274811]: error stack: B084002 : error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib 2008.09.02 14:20:17 LOG3[16442455:16274811]: error stack: 2006D080 : error:2006D080:BIO routines:BIO_new_file:no such file 2008.09.02 14:20:17 LOG3[16442455:16274811]: SSL_CTX_load_verify_locations: 2001002: error:02001002:system library:fopen:No such file or directory 2008.09.02 14:20:17 LOG3[16442455:16274811]: Server is down What caused this? ************** 2. My other question is: Do I need to put stunnel.exe in the startup folder? Does it automatically reference stunnel.conf (that is what I was assuming)? When I get it to run correctly, automatically referencing stunnel, conf, then can I run Calypso with the settings changed to tie in with the stunnel conf file? All of the above I was assuming was true, but I'm just asking to make sure. Thanks! Lenny

3 6

Respawn stunnel
by Joe Kemp 09 Sep '08

09 Sep '08

What is the best way to setup stunnel to respawn if it crashes? I have looked at inittab (probably would have to have stunnel run in foreground?) or the procautostart.cpp utility. Any other ideas? Is there an easier way. Joe A. Kemp CapWIN Senior Systems Architect (O) 301-614-3727 (C) 301-502-1281

2 1

Re: [stunnel-users] Scripting stunnel to load automatically when OS X 10.5 server starts up -plist
by Christopher Hunt 05 Sep '08

05 Sep '08

On 04/09/2008, at 8:00 PM, stunnel-users-request(a)mirt.net wrote: > Here is my plist. I put this in /Library/LaunchDaemons. What do you > think? --Thanks, Allen Firstly have you considered using Lingon to maintain your plist? That could help you. > <?xml version="1.0" encoding="UTF-8"?> > <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd > "> > <plist version="1.0"> > <dict> > <key>KeepAlive</key> > <true/> > <key>Label</key> > <string>stunnel_startup</string> > <key>ProgramArguments</key> > <array> > <string>/opt/local/bin/stunnel</string> > </array> > <key>RunAtLoad</key> > <true/> > </dict> > </plist> The most obvious thing that stands out is that you aren't supplying a config file argument to stunnel. How's it going to locate your config file? You might want to check your system.log file using the Console application and watch for messages. You also need to use launchctl to load your plist - Lingon makes this pretty straightforward. Cheers, -C

1 0

Scripting stunnel to load automatically when OS X 10.5 server starts up -plist
by Allen 03 Sep '08

03 Sep '08

Thank you Chris and Tom, for your responses, Here is my plist. I put this in /Library/LaunchDaemons. What do you think? --Thanks, Allen <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd "> <plist version="1.0"> <dict> <key>KeepAlive</key> <true/> <key>Label</key> <string>stunnel_startup</string> <key>ProgramArguments</key> <array> <string>/opt/local/bin/stunnel</string> </array> <key>RunAtLoad</key> <true/> </dict> </plist>

1 1

Re: [stunnel-users] Scripting stunnel to load automatically when OS X 10.5 server starts up -any solution?
by Christopher Hunt 03 Sep '08

03 Sep '08

On 03/09/2008, at 8:00 PM, stunnel-users-request(a)mirt.net wrote: > Does anybody have a solution that will start up stunnel on OS X > bootup? ... Sounds to me like a launchd config error. How about sending through the plist? Cheers, -C

2 1

Starting stunnel automatically on OS X system startup
by Allen 02 Sep '08

02 Sep '08

Does anybody have a solution that will start up stunnel on OS X bootup? I've installed stunnel on a Leopard server (OS 10.4.5.4) to make a smtp SSL relay work (and it works fine). The problem is, we'd have to type in /opt/local/bin/stunnel on the command line every time the server is rebooted. Rather than having to create a /Library/ SystemStartup/diretory_structure_with_plist_etc., has somebody done this, and can lead me in the right direction, in the interest of time? I've just run out of time, and I kinda think that somebody must have done this already. Thanks! Allen

1 1

A Calypso user needs your help with stunnel
by John Bryant 02 Sep '08

02 Sep '08

Dear folks: I am trying to install stunnel so that I can have an SSL capability with Calypso. I was guided to the stunnel.org site by instructions at: http://www.windowsbbs.com/courier-email-client/35188-ssl-connection-really-…. (the instructions that I am referring to are duplicated below, under the first line of asterisks - they mention later versions of stunnel, but do not update their instructions for them adequately) I could not understand the instructions at your site that told about modifying the conf file with the LATEST version of stunnel.exe, which I did download and install and that's as far as I got - couldn't understand the options as clearly as I had the others, so uninstalled it.) (Tried downloading the OLD version, 4.05 exe, mentioned in the instructions and the two dll files,and making all the changes to THAT conf.txt file, etc, but THAT did not work because when I ran the shortcut to the conf.txt file that I had put in the Start folder, the computer gave me, when connected, a "cannot find 1 1/4 dll" message, and then an "illegal op" and a "cannot run due to restrictions on your computer" message (when not connected, just the latter two). I know you don't want to hear about old versions but it was logical for me to try since I could not figure out how to use the latest version.) So what do I do now? Thanks! Lenora (do not give up on me, I have computers in my background, etc. etc) ************** (Excerpts from the thread at the url listed above) http://www.windowsbbs.com/courier-email-client/35188-ssl-connection-really-… A week ago I provided instructions for using stunnel to provide SSL functionality for Calypso/Courier - in case your email provider requires SSL, which Calypso and Courier do not yet support. Those instructions were correct if your email provider uses the dedicated SSL ports - 465 for smtps, 995 for pop3s, 993 for imap4s. They were incomplete if your email provider uses the standard ports - 25 for smtp, 110 for pop3, [N/A - 143 for imap4]. Normally when the SSL ports are being used the entire conversation is encrypted with SSL. stunnel will initiate the session with the standard SSL protocol. However, if the standard ports are being used the session is initiated without SSL and then switches to SSL using an smtp or pop3 specific protocol (STARTTLS or STLS). stunnel needs to be told this, or it wont work on the standard ports. For the standard ports an extra line is required in the configuration file. To use stunnel do the following: 1) download the following files from http://www.stunnel.org/download/binaries.html stunnel-4.05.exe (version may be higher when you go there) libssl32.dll libeay32.dll and put them into a directory such as C:\Program Files\Stunnel\ 2) create a shortcut to stunnel-4.05.exe in the same directory [in WinXP do this by right clicking on it and selecting Create Shortcut] 3) edit the shortcut by right clicking on it and selecting Properties Modify the Target to look like this "C:\Program Files\Stunnel\stunnel-4.05.exe" stunnel-conf.txt (Optional) Rename the shortcut to remove the "Shortcut to ". 4) create the file stunnel-conf.txt in the same directory, and put the following lines in it: ----starting with next line---- # GLOBAL OPTIONS client = yes output = stunnel-log.txt debug=4 taskbar = yes # SERVICE-LEVEL OPTIONS [POP3 (ISP name)] accept = 127.0.0.1:108 connect = myISPs.POP3server.net:995 [SMTP (ISP name)] accept = 127.0.0.1:107 connect = myISPs.SMTPserver.net:465 ----ending with previous line---- Change the server names (before colons), and perhaps ports (after colons), to be correct for your ISP. Change ISP name too. Save and exit. 4b) if your email provider uses standard ports for either smtp or pop3, make either or both of the following changes to your stunnel-conf.txt file: [POP3 (ISP name)] accept = 127.0.0.1:108 connect = myISPs.POP3server.net:110 protocol = pop3 [SMTP (ISP name)] accept = 127.0.0.1:107 connect = myISPs.SMTPserver.net:25 protocol = smtp Once again, change the server names (before colons) to be correct for your ISP. Change ISP name too. Save and exit. 4c) if you have two email providers requiring SSL you can add a second set of services like so: [POP3 (2nd ISP name)] accept = 127.0.0.1:106 connect = my2ndISPs.POP3server.net:995 [SMTP (2nd ISP name)] accept = 127.0.0.1:105 connect = my2ndISPs.SMTPserver.net:465 Each email provider requires its own two ports (e.g. 108+107, 106+105), but 2 email accounts at a single provider can share the same pair of ports. However, if an email provider only uses SSL for one of smtp or pop3, you only need one of the two service sections. Once again, change the server names (before colons) to be correct for your ISP. Change ISP name too. Save and exit. 5) put a copy of that shortcut into your Start Menu's Programs/Startup folder [normally, by dragging shortcut over Start button, over Programs, over Startup, then drop it in Startup list.] 6) edit your Calypso/Courier Account Properties to change your mail servers. Incoming: Port 108 Server 127.0.0.1 Outgoing: Port 107 Server 127.0.0.1 [this is done differently for Calypso and Courier, due to Courier's new approach to SMTP servers] If an email provider only uses SSL for one of smtp or pop3, you only need to change one of the two mail servers. If you set up more than one email provider for SSL, change each account's properties to the corresponding ports. Now when you check or send email Calypso/Courier will communicate with stunnel, which will connect to your ISP's mail servers via SSL. The shortcut in Startup will rerun stunnel each time you reboot. You should just double-click on the shortcut in the program folder to run stunnel the first time. Hope this helps. Greg ************* Later addition (later on same thread): I just reinstalled all of my computer and I forgot to backup my sTunnel config! Anyway, the instructions have changed a bit as of sTunnel version 4.12... sTunnel is now distributed as an installer EXE, and the auxiliary DLLs are installed by default. The only step that really changes is step 1. All you have to do is to download the sTunnel installer and run it. There is no need to download the other files. The rest stays pretty much the same. ********** Question from somebody: First of all, I want to thank you for posting this very useful 'how to' -- this is what foruming is all about I have two questions (for anyone): 1. When using Stunnel, does it completely encrypt the user name, password, and the contents of the email, or just the contents? 2. The Stunnel website (www.stunnel.org) mentions that you'd also need the OpenSSL Libraries to make it work. But I did not download them, and still managed to make the Stunnel work with Courier. Am I (still) missing something? ************ Answer: 1. stunnel establishes an ssl tunnel (hence the name) between your computer and the email server. So every byte travelling between the two is encrypted. It's like establishing a VPN between your computer and the server. 2. As gmagana posted at the start of the month, they seem to have enhanced the installation process - such that you don't need to worry about the extra files. Isn't open source great! ********* Final comment: Looks like I can finally use Courier with Google's Gmail (http://gmail.google.com) to send/receive encrypted email. (End of excerpts)

2 1

Re: [stunnel-users] failed to build stunnel 4.25 under VS 2005
by Michal Trojnara 29 Aug '08

29 Aug '08

On Fri, 29 Aug 2008 00:00:56 +0800, "Ericdai" <pcix133(a)hotmail.com> wrote: > I try to build Stunnel 4.25 under VS2005 ,but failed Today I updated stunnel, so it can be built with Visual C++ 2008 (known also as Visual C++ 9.0). My plan is to release stunnel 4.26 next week. > prototypes.h(428) : error C2081: 'socklen_t' : name in formal > parameter list illegal I had no problem with socklen_t. Maybe it's specific to the old version of Visual C++. > I also suggest build a windows client only version > n It only can be running on windows > n It only can act as a client > n I think it can reduce the code size and runtime footprice smaller Not really. The difference would be negligible. Best regards, Mike

1 0

failed to build stunnel 4.25 under VS 2005
by Ericdai 28 Aug '08

28 Aug '08

I try to build Stunnel 4.25 under VS2005 ,but failed cl -MD -W3 -Ox -O2 -Ob2 -Gs0 -GF -Gy -GL -nologo -I"..\..\ssl\inc32" -DUSE_WIN32 -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE -DHAVE_GETADDRINFO -DHAVE_GETNAMEINFO -D_MBCS /c stunnel.c stunnel.c prototypes.h(428) : error C2081: 'socklen_t' : name in formal parameter list illegal stunnel.c(206) : error C2065: 'socklen_t' : undeclared identifier stunnel.c(206) : error C2146: syntax error : missing ';' before identifier 'addrlen' stunnel.c(206) : error C2065: 'addrlen' : undeclared identifier I use nmake -f vc.mak to do it Anyone has build it successfully ,pls help me ! Another way ,is there a stunnel solution or project file ? I also suggest build a windows client only version n It only can be running on windows n It only can act as a client n I think it can reduce the code size and runtime footprice smaller Thanks and best regards Eric dai

1 0