- stunnel-users - stunnel.org

Problems with Stunnel 4.22 build
by GGrant 04 Apr '08

04 Apr '08

There's a problem with the Stunnel 4.22 build as there's undefined IDs in the resources.rc file. To get around this get the resources.rc file from an earlier build (e.g. Stunnel 4.21) and replace it. It should compile happily -- View this message in context: http://www.nabble.com/Problems-with-Stunnel-4.22-build-tp16491431p16491431.… Sent from the Stunnel - Users mailing list archive at Nabble.com.

1 0

23 secs to list 5000 files using stunnel and samba on linux
by Paul Kerin 04 Apr '08

04 Apr '08

Hi I'm using the following s/w versions on RHEL3: Stunnel: 4.04 (also experimenting with 4.22, no difference so far) Samba: 3.0.9-1.3E.10 Kernel: 2.4.21-32.0.1.EL Stunnel is used to encrypt samba connections from linux clients because redhat 3 doesn't support NTLMv2 (cifs not standard and probably not an option). To list 5000 files (simply typing ls within a mounted directory on the client) it consistently takes around 20-23 seconds to return the data. Listing is almost instantaneous when using a windows client, or using a linux client without stunnel. As a side note, if I pipe the result to /dev/null it takes around 9 seconds (?). The network forwarding path from the samba client to samba server is: smbclient > localhost:924 > stunnel > remotehost:923 > stunnel > samba server (port 446) Tcpdump shows that when using stunnel about 10500 packets are generated, minus stunnel it's more like 500. I'd expect some overhead related to SSL, but 21 times the traffic seems a little excessive. I've experimented with socket options such as TCP_NODELAY, SO_LINGER, SO_RCVLOWAT, SO_OOBINLINE, etc with no improvement at all. However, my understanding of these is pretty superficial so I'm not confident I've exhausted all options here (ie perhaps combining multiple settings at once). I've got stunnel debug set to 7 on client and server. No errors and no logging at all except for the initial handshake when the mount is created. Including the tcpdump would probably be excessive at this stage. In summary, using stunnel the data gets transmitted in packets usually containing around 200 bytes, whereas without stunnel it's mostly 1408 byte packets. Any suggestions? Thanks Paul

4 4

Stunnel Newbie - Compiling Stunnel and adding patches for Windows
by GGrant 02 Apr '08

02 Apr '08

Hi, I've downloaded the Stunnel source code and I am trying to compile it with the Visual C++ compiler (cl.exe). I am not sure what to do as I cannot find the Makefile.w32. So how do I go about it? Also how do you apply a user patch to the source code/ Must I copy and paste the code to the required files? Cheers -- View this message in context: http://www.nabble.com/Stunnel-Newbie---Compiling-Stunnel-and-adding-patches… Sent from the Stunnel - Users mailing list archive at Nabble.com.

1 0

Stunnel-Openssl: Problems with certificate chain
by Pietro Di Primo 31 Mar '08

31 Mar '08

Hi, My name is Pietro Di Primo and I work on the INFN Grid project (http://grid.infn.it/) I'm trying to develop an application based on stunnel. Everything works well when I use user certificates (signed by our CA), but i need to use (on the client side) a particular proxy. This proxy contains a public and a private key, and the public key of the user that generated it (I atteched a file with a such proxy). On the server side I have the CA certificate but not the user's one, so I can't verify the client (unable to get local issuer certificate). I tried to get the user certificate using the SSL_get_peer_cert_chain function on the server, but it returns NULL. On the client side I tried SSL_CTX_use_certificate_chain_file, Also I tried to get a STACK_OF(X509) and use SSL_CTX_use_certificate (for proxy certificate), and SSL_CTX_add_extra_chain_cert (to include the user's certificate), but it still doesn't work. Can you help me please? Best Regards -- --- Ing. Pietro Di Primo INFN - Istituto Nazionale di Fisica Nucleare Grid Computing Research Area Via S. Sofia 78 95123 CATANIA (Italy) Voice : +39 095 378-5446/5517 Fax. : +39 095 378 5518 Mobile : +39 320 8591527 E-mail : pietro.diprimo(a)ct.infn.it Skype : pietrodiprimo

1 0

Re: [stunnel-users] Enhancement request - Increase thread stack size
by Mccue, Richard Alan 27 Mar '08

27 Mar '08

Michal Trojnara wrote: >> I load an engine into Stunnel to access the private key. The engine loads >> without incident, but Stunnel consistently aborts when creating a session >> with the first peer because the thread stack is too small. > > I'm not sure if it's a good idea to sacrifice stunnel scalability for > compatibility with this engine. Thread stack size is one of the main > limitations for the number of concurrent threads on 32-bit platforms. IMHO > it's better to fix the engine code to allocate its buffers on the heap.> > > What do you think? All things considered, I must agree that reducing the engine use of the stack would be the better solution. I'll look it over and see if I can find anything sizable on the stack to move. Thanks for the suggestion! - Rich

2 2

New libwrap code
by Randy McMurchy 26 Mar '08

26 Mar '08

Hi all, My apologies if this has been discussed (I've reviewed the archives since 4.21 was released), and if so please just point me in the right direction. I read in some of the messages there's been a revamp (overhaul, changes, whatever) of the libwrap code in Stunnel-4.21. I'm not having any issues using the new version, however, I'm seeing it spawn 5 processes where in every other version I've used in the past there has always only been one process spawned. Here's what I see: root 3408 1 0 17:50 pts/10 00:00:00 /usr/bin/stunnel root 3409 1 0 17:50 pts/10 00:00:00 /usr/bin/stunnel root 3410 1 0 17:50 pts/10 00:00:00 /usr/bin/stunnel root 3411 1 0 17:50 pts/10 00:00:00 /usr/bin/stunnel root 3412 1 0 17:50 pts/10 00:00:00 /usr/bin/stunnel stunnel 3413 1 0 17:50 ? 00:00:00 /usr/bin/stunnel Is this a product of the new libwrap code? I turned debug messages WAY up and I see over and over startup messages for all 5 processes. Example of one: 2008.03.25 17:50:24 LOG5[3407:3082803904]: stunnel 4.21 on i686-pc-linux-gnu with OpenSSL 0.9.8e 23 Feb 2007 2008.03.25 17:50:24 LOG5[3407:3082803904]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Auth:LIBWRAP 2008.03.25 17:50:24 LOG6[3407:3082803904]: file ulimit = 1024 (can be changed with 'ulimit -n') 2008.03.25 17:50:24 LOG6[3407:3082803904]: poll() used - no FD_SETSIZE limit for file descriptors 2008.03.25 17:50:24 LOG5[3407:3082803904]: 500 clients allowed 2008.03.25 17:50:24 LOG7[3407:3082803904]: FD 9 in non-blocking mode 2008.03.25 17:50:24 LOG7[3407:3082803904]: FD 10 in non-blocking mode 2008.03.25 17:50:24 LOG7[3407:3082803904]: FD 11 in non-blocking mode 2008.03.25 17:50:24 LOG7[3407:3082803904]: SO_REUSEADDR option set on accept socket 2008.03.25 17:50:24 LOG7[3407:3082803904]: swat bound to 0.0.0.0:904 2008.03.25 17:50:24 LOG7[3413:3082803904]: Created pid file /run/stunnel.pid 2008.03.25 17:50:42 LOG7[3413:3082803904]: swat accepted FD=12 from 192.168.11.212:1535 2008.03.25 17:50:42 LOG7[3413:3086076816]: swat started 2008.03.25 17:50:42 LOG7[3413:3086076816]: FD 12 in non-blocking mode 2008.03.25 17:50:42 LOG7[3413:3086076816]: Waiting for a libwrap process 2008.03.25 17:50:42 LOG7[3413:3086076816]: Acquired libwrap process #0 2008.03.25 17:50:42 LOG7[3413:3086076816]: Releasing libwrap process #0 2008.03.25 17:50:42 LOG7[3413:3086076816]: Released libwrap process #0 2008.03.25 17:50:42 LOG7[3413:3086076816]: swat permitted by libwrap from 192.168.11.212:1535 2008.03.25 17:50:42 LOG5[3413:3086076816]: swat accepted connection from 192.168.11.212:1535 When I connect to swat (Samba config tool) it again goes through a process of using all 5 of the system processes. Sorry for being so verbose here. My question is: Has something changed so that there is more than one process spawned (and used) when Stunnel is started? Any help would be appreciated. -- Randy

1 0

Enhancement request - Increase thread stack size
by Mccue, Richard Alan 26 Mar '08

26 Mar '08

I load an engine into Stunnel to access the private key. The engine loads without incident, but Stunnel consistently aborts when creating a session with the first peer because the thread stack is too small. I rebuilt Stunnel 4.21 on my test machine after increasing the stack size parameter and it fixed the problem. Here is the diff: --------------------- # diff -b common.h common.h_orig 33c33 < #define STACK_SIZE 32768*4 --- > #define STACK_SIZE 32768 42c42 < #define STACK_SIZE 65536*4 --- > #define STACK_SIZE 65536 --------------------- Could this enhancement be included in the next Stunnel release? Regards, Rich

1 0

HTTPS being redirected back to HTTP
by Steven Buehler 25 Mar '08

25 Mar '08

I have tested several versions of stunnel up to version 4.21 on SLES 9 and 10. I am trying to use stunnel to implement TLS 1.0 for HTTPS on a Lotus Domino server. I am able to connect to the Domino server with a web browser with HTTPS successfully. However, once I log into the server it drops me back down to HTTP. I suspect the Domino server is sending a redirect back to HTTP during the login because if I change the URL back to HTTPS in the browser after the login, it re-establishes the HTTPS connection. I've checked with Lotus support and there is nothing that can be done on the Domino server to prevent this. Is there anyway to handle this in stunnel so that the requests remain as HTTPS requests to the browser? Here is the services section of my stunnel.conf [https] sslVersion = TLSv1 accept = gsvatestm02.er.usgs.gov:443 connect = gsvatestm02.er.usgs.gov:80 TIMEOUTclose = 0

2 1

possible stunnel memory leak
by Stefano Stabellini 25 Mar '08

25 Mar '08

Hi all, I may have found a possible memory leak in stunnel (version 4.15) when used with pthreads. What I am seeing is the memory usage going up when connections open and never going down, no matter if all the connections close. It is really easy to reproduce it: I have started two stunnel instances communicating with each other, the first one acting as a server (config file stunnel.1) and executing cat, the second one acting as a client (config file stunnel.2) and opening port 5556. Then I execute the script I have attached that simply opens 500 connections using netcat to port 5556. If you cat /proc/<stunnel pid>/status you can see that the memory usage is about 300MB. The problem is that even after all the connections are closed the memory usage stays (more or less) the same. I tried to find the bug myself using valgrind, but I couldn't get far, it seems that valgrind gets confused by openssl so doesn't print very useful informations. I really appreciate any help you can give me; just tell me if you need any other info. Best Regards, Stefano Stabellini #!/bin/bash i=1 while test $i -lt 520 do cat script | nc 127.0.0.1 5556 &>/dev/null & echo $i i=$(( $i + 1 )) done foreground = yes [test] accept = 5555 cert = /etc/ssl/certs/stunnel.pem exec = cat foreground = yes [test] accept = 5556 cert = /etc/ssl/certs/stunnel.pem client = yes connect = 5555

1 0

IMAPS stunnel on older OSX Mac: SSL3_GET_RECORD:wrong version number
by Tom Shaw 23 Mar '08

23 Mar '08

1. compiled and installed stunnel on older OSX Mac. Tried connectiong via IMAPS and POP3S using Apple OSX Mail and I get the errors shown in line 4. Process works when I change my .conf file to contain sslVersion = SSLv2. I'm a neophyte to ssl and I have no idea what is wrong or where to start or if this situation is OK. Any help is appreciated. Also this needs to be backward compatible to OSX 10.3.9 which is why the compiling on Panther. 2. stunnel version 4.20 3. standalone via sudo from command line 4. error message Mar 23 10:49:52 musky stunnel: LOG5[2941:25192960]: imaps accepted connection from 206.208.58.127:37295 Mar 23 10:49:52 musky stunnel: LOG3[2941:25192960]: SSL_accept: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number Mar 23 10:49:52 musky stunnel: LOG5[2941:25192960]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 5. $ /usr/local/sbin/stunnel -version stunnel 4.20 on powerpc-apple-darwin7.9.0 with OpenSSL 0.9.7l 28 Sep 2006 Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv4 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none 6. $ uname -a Darwin musky.oitc.com 7.9.0 Darwin Kernel Version 7.9.0: Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC Power Macintosh powerpc 7. Your libc version if you use Linux. 8. $ gcc -v Reading specs from /usr/libexec/gcc/darwin/ppc/3.3/specs Thread model: posix gcc version 3.3 20030304 (Apple Computer, Inc. build 1666) 9. $ openssl version OpenSSL 0.9.7l 28 Sep 2006 10. My conf ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /usr/local/etc/stunnel/secure_mail.pem ;key = /usr/local/etc/stunnel/secure_mail.pem ; Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = SSLv2 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/var/lib/stunnel/ ;setuid = nobody ;setgid = nobody ;setgid = nogroup ; PID is created inside chroot jail pid = /var/run/stunnel.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail ;CApath = /certs ; It's often easier to use CAfile ;CAfile = /usr/local/etc/stunnel/certs.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode ;client = yes ; Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 587 [sldap] accept = 636 connect = 389 ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini

1 0