- stunnel-users - stunnel.org

Difficulty to select exact Cipher
by Sachin Deshmukh 12 Jul '21

12 Jul '21

Hello Together, I had been trying to use a stunnel to set PSK encrypted TLS. Below is my conf file. [client] client = yes accept = 127.0.0.1:8888 connect = 192.168.1.100:443 ciphers = PSK-AES128-CBC-SHA256 PSKsecrets = /data/dummy.txt I can see communication, but client e.g. Stunnel from Client side offer several other cipher in addition to exact one which is expected as per conf. I wish PSK-AES128-CBC-SHA256 (0x00ae) But I see the list below in actual communication. [image: image.png] Please let me know 1 .how we can inform stunnel to use exact and only 1 cipher provided in the conf file. Or 2. How can we state hex id instead of string. If I see a cipher list, with the same keyword as a part or whole there are more than 1 ciphers, I suppose this causes stunnel to take a list as per string match. ECDHE-PSK-AES128-CBC-SHA256 TLSv1 Kx=ECDHEPSK Au=PSK Enc=AES(128) Mac=SHA256 RSA-PSK-AES128-CBC-SHA256 TLSv1 Kx=RSAPSK Au=RSA Enc=AES(128) Mac=SHA256 DHE-PSK-AES128-CBC-SHA256 TLSv1 Kx=DHEPSK Au=PSK Enc=AES(128) Mac=SHA256 *PSK-AES128-CBC-SHA256 * TLSv1 Kx=PSK Au=PSK Enc=AES(128) Mac=SHA256 Can we make a stunnel to select only one exact cipher?

1 0

curl 7.61 exit status 8 from stunnel service of tls1
by kmx1818＠gmail.com 09 Jul '21

09 Jul '21

Hello all, For a remote tls1 web service : $ # openssl s_client -connect myremote:7002 -tls1 CONNECTED(00000004) depth=0 CN = xxx, OU = xxx, O = xxx, C = xxx verify error:num=18:self signed certificate verify return:1 depth=0 CN = xxx, OU = xxx, O = xxx, C = xxx verify return:1 --- Certificate chain ... --- Server certificate -----BEGIN CERTIFICATE----- MIIC8zCCAdsCBGCvjhEwDQYJKoZIhvcNAQEFBQAwPjEOMAwGA1UEAxMFRUZXRUIx ... QG9sNNhQW65rRVmdqy/g0cBbLKRKhmRCS+ajRIzBcO9ZmMe42TES -----END CERTIFICATE----- subject=XXX issuer=XXX --- No client certificate CA names sent --- SSL handshake has read 889 bytes and written 509 bytes --- New, TLSv1/SSLv3, Cipher is RC4-MD5 Server public key is 2048 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : TLSv1 Cipher : RC4-MD5 Session-ID: 2D9F8D8833A459C16C1D01F0C92F8EB7 Session-ID-ctx: Master-Key: 1BF68D1AAEEC291A60252ECD63C374661FBBE028FB39A75DDA29E4E3FB6FE34CFC80F875F9E16F9D7C840F185757F583 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None Start Time: 1625842735 Timeout : 7200 (sec) Verify return code: 18 (self signed certificate) --- closed $ I can test it alright with an "old" curl $ curl --version curl 7.15.4 (sparc-sun-solaris2.9) libcurl/7.15.4 OpenSSL/0.9.7g zlib/1.2.3 Protocols: tftp ftp telnet dict ldap http file https ftps Features: IPv6 Largefile NTLM SSL libz ...like this $ curl -skL https://myremote:7002/MyWebService?WSDL <?xml version="1.0" encoding="UTF-8"?> ... </soap:address> </port> </service> </definitions> I want to tls1.2-enable myremote:7002 with stunnel, and run a tls1.2 curl instead. My stunnel installation $ /opt/csw/bin/stunnel -version Initializing inetd mode configuration stunnel 5.59 on sparc-sun-solaris2.10 platform Compiled with OpenSSL 1.0.2u 20 Dec 2019 Running with OpenSSL 1.0.2o 27 Mar 2018 Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP Global options: RNDbytes = 1024 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = HIGH:!aNULL:!SSLv2:!DH:!kDHEPSK curves = prime256v1 debug = daemon.notice logId = sequential options = NO_SSLv2 I start it with this service config: [my12] client = no accept = 7002 connect = myremote:7002 cert = /etc/opt/csw/stunnel/stunnel.crt key = /etc/opt/csw/stunnel/stunnel.key sslVersion = TLSv1.2 debug = 7 and test it with a fairly recent curl $ /opt/csw/bin/curl --version curl 7.61.0 (sparc-sun-solaris2.10) libcurl/7.61.0 OpenSSL/1.0.2o zlib/1.2.8 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) Release-Date: 2018-07-11 Protocols: dict file ftp ftps gopher http https imap imaps pop3 pop3s rtsp smb smbs smtp smtps telnet tftp Features: AsynchDNS IDN IPv6 Largefile NTLM NTLM_WB SSL libz TLS-SRP UnixSockets HTTPS-proxy PSL Metalink Alas, the recent curl call $ /opt/csw/bin/curl -skL https://myremote:7002/MyWebService?WSDL ...fails with exit status 23 In verbose mode we get * Trying 127.0.0.1... * TCP_NODELAY set * Failed to set TCP_KEEPALIVE on fd 4 * Connected to localhost (127.0.0.1) port 7002 (#0) * ALPN, offering http/1.1 * Cipher selection: ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH * successfully set certificate verify locations: * CAfile: none CApath: /etc/opt/csw/ssl/certs * TLSv1.2 (OUT), TLS header, Certificate Status (22): * TLSv1.2 (OUT), TLS handshake, Client hello (1): * TLSv1.2 (IN), TLS handshake, Server hello (2): * TLSv1.2 (IN), TLS handshake, Certificate (11): * TLSv1.2 (IN), TLS handshake, Server key exchange (12): * TLSv1.2 (IN), TLS handshake, Server finished (14): * TLSv1.2 (OUT), TLS handshake, Client key exchange (16): * TLSv1.2 (OUT), TLS change cipher, Client hello (1): * TLSv1.2 (OUT), TLS handshake, Finished (20): * TLSv1.2 (IN), TLS change cipher, Client hello (1): * TLSv1.2 (IN), TLS handshake, Finished (20): * SSL connection using TLSv1.2 / ECDHE-RSA-AES256-GCM-SHA384 * ALPN, server did not agree to a protocol * Server certificate: * subject: C=TS; ST=Westfarthing; L=Hobbiton; O=Thorin and Company; OU=Burglars; CN=ahost.theshire.net; emailAddress=bilbo(a)theshire.net * start date: Jun 30 09:24:25 2021 GMT * expire date: Jun 30 09:24:25 2022 GMT * issuer: C=TS; ST=Westfarthing; L=Hobbiton; O=Thorin and Company; OU=Burglars; CN=ahost.theshire.net; emailAddress=bilbo(a)theshire.net * SSL certificate verify result: self signed certificate (18), continuing anyway. > GET /MyWebService?WSDL HTTP/1.1 > Host: localhost:7002 > User-Agent: curl/7.61.0 > Accept: */* > Warning: Binary output can mess up your terminal. Use "--output -" to tell Warning: curl to output it to your terminal anyway, or consider "--output Warning: <FILE>" to save to a file. * Failed writing body (0 != 7) * Closing connection 0 * TLSv1.2 (OUT), TLS alert, Client hello (1): $ I tried various curl flags - nothing works. In the meantime stunnel logs no errors Jul 9 16:16:45 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: Service [my12] accepted connection from 127.0.0.1:39165 Jul 9 16:16:45 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: s_connect: connected 10.240.28.69:7002 Jul 9 16:16:45 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: Service [my12] connected remote server from xxx.yyy.zzz.www:39166 Jul 9 16:17:10 acuapd30 stunnel: [ID 801593 daemon.notice] LOG5[18]: Connection closed: 7 byte(s) sent to TLS, 116 byte(s) sent to socket What am i doing wrong!? Thanks in advance!

1 0

stunnel and rsyslog
by Yann RESCOURIO 28 Jun '21

28 Jun '21

Hello I use stunnel for rsyslog. And on the client equipment, I use also rsyslog queues for buffering in case of disconnection. But in case of reboot: * without stunnel, the buffered log messages are received on the rsyslog server * with stunnel, no buffered log messages are received on the rsyslog server On the client equipment, is it possible to refuse the local stunnel connections as long as the remote stunnel connection is down ? Regards Yann Rescourio

3 2

FIPS 140-2 & Ubuntu Pro
by Patrick Kaeding 23 Jun '21

23 Jun '21

Hi I am trying to set up stunnel with FIPS 140-2 compliance. I found some discussion of this on this mailing list from many years ago, but I'm not sure how much of that is still relevant today. I am running Ubuntu Pro 18.04, with FIPS mode (including the userspace modules: https://security-certs.docs.ubuntu.com/en/fips) If I simply `apt-get install stunnel4`, I can create a config with `fips = yes`, and when I start it up, I see this line logged: 2021.06.23 15:45:24 LOG5[ui]: FIPS mode enabled Does this mean I am all set, without needing to compile anything from source? In this message (from almost a decade ago), it sounds like this might be the validation I need: > BTW: "fips" option is only available when stunnel is built with FIPS support. FIPS mode is also clearly logged on startup https://www.stunnel.org/pipermail/stunnel-users/2012-November/003963.html Or do I need to build stunnel from scratch, using my local openssl distribution? Thanks! -- Patrick Kaeding pkaeding(a)launchdarkly.com

1 0

Number of tunnels open in Stunnel
by Moti Berger 21 Jun '21

21 Jun '21

Hi Is there a command I can run to get the current number of opened tunnels? I'm running Stunnel version 5.57. Thanks, Moti

1 0

Help needed for email client
by Ian Huysman 15 Jun '21

15 Jun '21

Hi, I just tried to configure stunnel as proxy between an email client (Outlook Express) and the email server (SMTP and IMAP). The problem is that the connection times out in the client while synchronising the IMAP folders. But I can send emails from the client. This is my relatively basic configuration: [SMTP] client = yes accept = 25 connect = smtp.office365.com:587 protocol = smtp [IMAP] client = yes accept = 143 connect = outlook.office365.com:993 protocol = imap Any help would be greatly appreciated! Regards, Ian.

3 2

SFTP over stunnel
by sameer_rm90＠hotmail.com 13 Jun '21

13 Jun '21

Hi, Is SFTP works over stunnel? If yes, how can configure it ?

2 1

connect with hostname obtains incorrect IP address
by stunnel＠dsbconsulting.com 11 Jun '21

11 Jun '21

Hello everyone. I'm trying to use stunnel to forward smtp traffic from an old webcam to an smtp server that requires TLS. Everything works fine if I put the IP address of the smtp server in the connect= line, but if I put the hostname there, stunnel tries to connect to a seemingly random IP address. This happens using stunnel on Windows 10 and also on my router with OpenWrt (linux) Here is the config file: [smtp] client = yes accept = 192.0.0.1:25 ;connect = 199.193.7.228:465 connect = smtp.privateemil.com:465 And here is the failing part of the stunnel log file: 2021.06.11 18:24:54 LOG5[0]: Service [smtp] accepted connection from 192.0.0.111:49334 2021.06.11 18:24:54 LOG6[0]: s_connect: connecting 47.91.170.222:465 2021.06.11 18:24:54 LOG7[0]: s_connect: s_poll_wait 47.91.170.222:465: waiting 10 seconds 2021.06.11 18:24:54 LOG7[0]: FD=6 events=0x2001 revents=0x0 2021.06.11 18:24:54 LOG7[0]: FD=10 events=0x2005 revents=0x0 2021.06.11 18:25:04 LOG3[0]: s_connect: s_poll_wait 47.91.170.222:465: TIMEOUTconnect exceeded Here is the result of ping for the smtp server: PING smtp.privateemail.com (199.193.7.228): 56 data bytes 64 bytes from 199.193.7.228: seq=0 ttl=237 time=103.059 ms

2 1

encrypted connection between application server and db server drops exactly after 300
by simona vittori 09 Jun '21

09 Jun '21

Hello, the encrypted connection between application server and db server drops exactly after 300 seconds. why? without stunnel this does not happen. we cannot understand why Thank a lot Simona

1 0

How to get high-precision timestamps in the stunnel logs
by jori.gielis＠telenetgroup.be 27 May '21

27 May '21

Hi, I want to use more accurate timestamps in the logs of stunnel. It would be nice to have milliseconds. Current format: 2021.05.27 19:00:59 LOG7[3]: Remote descriptor (FD=70) closed Needed format: 2021.05.27 19:00:59,718 LOG7[3]: Remote descriptor (FD=70) closed Is it possible to accomplish this in stunnel version 5.56? Thanks! Best regards

1 0