stunnel-users

stunnel-users@stunnel.org

6 participants
3294 discussions

Check IP or Name of Client Or Server by Common Name
by Tigran Petrosyan 21 Oct '11

21 Oct '11

Hi all, I have made patch for stunnel-4.43. It helps you to switch on in the file of stunnell.conf new features, the option name is verify_peer. you can read more about it after patching, compiling and running the command "stunnel --help". The goal of this option to verify clients or servers "ip addreses or names of ip-addreses" with "Common name" of certificate. This option is very flexible and usable. It's possible to switch it of or use it as in field of global options and in service-level options. verify_peer = client_name | client_ip | remote_name | remote_ip -- Tigran Petrosyan

1 0

Attempting to debug slow stunnel connections
by Lamont Lucas 21 Oct '11

21 Oct '11

Hello stunnel-users, I've recently setup stunnel in front of haproxy to handle SSL connections. While it worked fine in testing, my simplistic benchmarks showed it unable to do more than 9 req/s, and as we turned some production traffic on, it appears that threads and connections quickly pile up and eventually timing out. I assume I've made some error in configuration, or there is something odd with my setup, as it appears stunnel has been benchmarked and performs well beyond what we're attempting here. I've read the FAQ and as much from the mailing list archives as I thought applicable, and I was unable to see any red flags or errors similar to what I'm seeing. If you don't mind, I'd like some help debugging the issue or pointers as to what else I could do to debug the issue. I've included details about my compile and configuration as well as the edited startup section from the debug (7) log. I compiled stunnel 4.44 with ./configure --disable-ipv6 --disable-libwrap --disable-fips. It's running on a different box than where it was compiled, but both machines should be identical. openssl version -a OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 built on: Thu Sep 3 14:22:06 EDT 2009 platform: linux-x86_64 options: bn(64,64) md2(int) rc4(ptr,int) des(idx,cisc,16,int) blowfish(ptr2) compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DKRB5_MIT -I/usr/kerberos/include -DL_ENDIAN -DTERMIO -WallM OPENSSLDIR: "/etc/pki/tls" engines: dynamic stunnel.4.44 -version stunnel 4.44 on x86_64-unknown-linux-gnu platform Compiled/running with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Threading:PTHREAD SSL:ENGINE Auth:none Sockets:POLL,IPv4 Global options: debug = daemon.notice pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = ALL:!SSLv2:!aNULL:!EXP:!LOW:-MEDIUM:RC4:+HIGH curve = prime256v1 session = 300 seconds sslVersion = TLSv1 for client, all for server stack = 65536 bytes TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Here's my configuration file: sslVersion = all ciphers = RC4-MD5:HIGH:!aNULL:!SSLv2 options = NO_SSLv2 setuid = root setgid = haproxy pid = /var/run/stunnel.pid #socket = l:TCP_NODELAY=1 #socket = r:TCP_NODELAY=1 output = /var/log/stunnel.log debug = 7 [XXX] CAfile = /etc/stunnel/ca_chain.crt cert = /etc/stunnel/XXX.crt key = /etc/stunnel/XXX.key accept = 443 connect = 127.0.0.1:81 #xforwardedfor = yes #TIMEOUTclose = 5 #TIMEOUTbusy = 2 #TIMEOUTconnect = 2 #TIMEOUTidle = 2 (I was previously running 4.32 with the xforwardedfor patch, but to eliminate potential issues I've upgraded to the latest version, running stock without the patch, hence the commented out xforwardedfor option) here's the startup: 2011.10.01 12:18:38 LOG7[21868:47602610340864]: No limit detected for the number of clients 2011.10.01 12:18:38 LOG7[21868:47602610340864]: signal_pipe: FD=3 allocated (non-blocking mode) 2011.10.01 12:18:38 LOG7[21868:47602610340864]: signal_pipe: FD=4 allocated (non-blocking mode) 2011.10.01 12:18:38 LOG5[21868:47602610340864]: stunnel 4.44 on x86_64-unknown-linux-gnu platform 2011.10.01 12:18:38 LOG5[21868:47602610340864]: Compiled/running with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 2011.10.01 12:18:38 LOG5[21868:47602610340864]: Threading:PTHREAD SSL:ENGINE Auth:none Sockets:POLL,IPv4 2011.10.01 12:18:38 LOG5[21868:47602610340864]: Reading configuration from file /etc/stunnel/stunnel.conf 2011.10.01 12:18:38 LOG7[21868:47602610340864]: PRNG seeded successfully 2011.10.01 12:18:38 LOG6[21868:47602610340864]: Initializing SSL context for service XXX 2011.10.01 12:18:38 LOG4[21868:47602610340864]: Insecure file permissions on /etc/stunnel/XXX.key 2011.10.01 12:18:38 LOG7[21868:47602610340864]: Certificate: /etc/stunnel/XXX.crt 2011.10.01 12:18:38 LOG7[21868:47602610340864]: Certificate loaded 2011.10.01 12:18:38 LOG7[21868:47602610340864]: Key file: /etc/stunnel/XXX.key 2011.10.01 12:18:38 LOG7[21868:47602610340864]: Private key loaded 2011.10.01 12:18:38 LOG7[21868:47602610340864]: Could not load DH parameters from /etc/stunnel/XXX.crt 2011.10.01 12:18:38 LOG7[21868:47602610340864]: Using hardcoded DH parameters 2011.10.01 12:18:38 LOG7[21868:47602610340864]: DH initialized with 2048-bit key 2011.10.01 12:18:38 LOG7[21868:47602610340864]: SSL options set: 0x01000000 2011.10.01 12:18:38 LOG6[21868:47602610340864]: SSL context initialized 2011.10.01 12:18:38 LOG5[21868:47602610340864]: Configuration successful Later, I see logs more or less like this: 2011.10.01 12:41:44 LOG7[29902:1108293952]: str_stats: 0 block(s), 0 data byte(s), 0 control byte(s) 2011.10.01 12:41:43 LOG7[29902:1116580160]: Service XXX started 2011.10.01 12:41:44 LOG7[29902:1116580160]: Option TCP_NODELAY set on local socket 2011.10.01 12:41:44 LOG5[29902:1116580160]: Service XXX accepted connection from YYY1:50059 2011.10.01 12:41:44 LOG7[29902:1108363584]: SSL state (accept): SSLv3 write server done A 2011.10.01 12:41:43 LOG7[29902:47056920704000]: local socket: FD=184 allocated (non-blocking mode) 2011.10.01 12:41:44 LOG7[29902:1108363584]: SSL state (accept): SSLv3 flush data 2011.10.01 12:41:44 LOG7[29902:47056920704000]: Service XXX accepted FD=184 from YYY2:58131 2011.10.01 12:41:44 LOG3[29902:1108363584]: SSL_accept: Peer suddenly disconnected 2011.10.01 12:41:44 LOG7[29902:1108433216]: SSL state (accept): before/accept initialization 2011.10.01 12:41:44 LOG7[29902:47056920704000]: local socket: FD=11 allocated (non-blocking mode) 2011.10.01 12:41:44 LOG7[29902:47056920704000]: Service XXX accepted FD=11 from YYY3:49309 2011.10.01 12:41:44 LOG5[29902:1108363584]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2011.10.01 12:41:44 LOG7[29902:1108363584]: Service XXX finished (173 left) I see the thread count steadily increase: # ps -eLf |grep stun |wc -l 513 later: # ps -eLf |grep stun |wc -l 1020 (the FD ulimit for this proces is only 1024 currently, but that does not appear to be the limiting factor yet) It's almost like stunnel is only processing one connection at a time to the local destination port, which causes stunnel to build up a pile of waiting connections and eventually they start timing out. I've verified with nc and some local tests that the 127.0.0.1:81 port is picking up connections even under load, so I don't believe the issue is on the haproxy side. The firewall is set to allow all localhost connections and the 443 ports are configured the same as the port 80 ports which do hundreds of reqs a second, further ruling out firewall issues. Is there any setting I'm missing that would or wouldn't allow stunnel to process connect calls in parallel? Is there any additional debug information I can provide? Thank you for your time.

2 1

"connect_blocking"
by Maroon Brinks 21 Oct '11

21 Oct '11

Hi Everyone, I was hoping you could help. I cannot for the life of me get my program to connect through stunnel to this ip address. It appears to connect to stunnel just fine, however I constantly recieve: "connect_blocking" and I've found it very very hard to find information on the internet about this error. Here is the log output below followed by my configuration file: ####LOG#### 2011.10.19 09:49:56 LOG7[28234:139956427736816]: local socket: FD=8 allocated (non-blocking mode) 2011.10.19 09:49:56 LOG7[28234:139956427736816]: Service bgcssl accepted FD=8 from 127.0.0.1:58178 2011.10.19 09:49:56 LOG7[28234:139956427839760]: Service bgcssl started 2011.10.19 09:49:56 LOG7[28234:139956427839760]: Option TCP_NODELAY set on local socket 2011.10.19 09:49:56 LOG5[28234:139956427839760]: Service bgcssl accepted connection from 127.0.0.1:58178 2011.10.19 09:49:56 LOG7[28234:139956427839760]: remote socket: FD=9 allocated (non-blocking mode) 2011.10.19 09:49:56 LOG6[28234:139956427839760]: connect_blocking: connecting 148.106.128.90:7631 2011.10.19 09:49:56 LOG7[28234:139956427839760]: connect_blocking: s_poll_wait 148.106.128.90:7631: waiting 10 seconds 2011.10.19 09:50:06 LOG3[28234:139956427839760]: connect_blocking: s_poll_wait 148.106.128.90:7631: TIMEOUTconnect exceeded 2011.10.19 09:50:06 LOG5[28234:139956427839760]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2011.10.19 09:50:06 LOG7[28234:139956427839760]: Service bgcssl finished (0 left) 2011.10.19 09:50:06 LOG7[28234:139956427839760]: str_stats: 0 block(s), 0 data byte(s), 0 control byte(s) ####CONFIG FILE#### ; stunnel.conf pid = /home/stunnel/bin/stunnel.pid ;setuid = nobody ;setgid = nobody foreground = yes sslVersion = TLSv1 service = stunnel client = yes debug = 7 output = stunnel.log [bgcssl] client = yes accept = 127.0.0.1:12347 connect = 148.106.128.90:7631 Any help would be greatly appreciated. Regards, Mark

2 1

Indirect CRL Support
by Sligar, Benjamin 21 Oct '11

21 Oct '11

I have been working, over the past few weeks, with one of my developers, attempting to support Indirect CRL's through OpenSSL/Stunnel. My initial attempts were to support direct CRL, which seems to work fine with the compile options I've listed below for both OpenSSL and Stunnel. ./config --prefix=/u/publish/dev/openssl/openssl-1.0.0d no-idea no-mdc2 no-rc5 no-md2 no-sse2 ./configure --prefix=/usr/local/stunnel-4.44/ --with-ssl=/usr/local/openssl-1.0.0d/ Reading through the FAQ and general documentation, I'm not finding much useful information on how to enable iCRL support. It may be a simple compile option I'm missing, or perhaps I just didn't find the correct page on the site/documentation, yet. If anyone has any useful information, or can point me in the right direction, the help would be greatly appreciated. I can provide configuration files and logs if it's of any use in this. Thank you in advance for any help you may be able to provide! My search continues.... ************************* Benjamin Sligar Manager, Development Support P: 703.453.8324 US_DEV_Support(a)tnsi.com ************************* This e-mail message is for the sole use of the intended recipient(s)and may contain confidential and privileged information of Transaction Network Services. Any unauthorised review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

2 1

NETBIOS over stunnel
by Ronald RiemVis 18 Oct '11

18 Oct '11

Dear all, Stunnel work with all kind of other connections on both side but can't get working the NETBIOS negotiation with the net use command. send like: net use q: \\10.0.0.1\name password /user:username does not work when use net use q: \\10.0.0.1\name /user:username I get the question about password.At the end also will fail Because an ISP blocked all traffic over port 139 and my friend want to attach my external LAN drive (my book live) I need to redirect ports including the netbios protocol. I want: from a local loopback network adapter with IP address 10.0.0.1 port 139 to an external adddres port 1000 This is the configuration on the site where the my book live is connected: client = yes [MyBook] accept = 10.56.10.100:1000 (is my local address) connect = 10.56.10.10:139 (address of the my book live device) On the other side is the coinfiguration: client = yes [MyBook] accept = 10.0.0.1:139 (loopback addapter address) connect = remote address:1000 (external address) What can I do more to let it work? Greetings, Ronald

2 1

default ciphers in stunnel 4.43 vs. stunnel 4.33
by Brian Peterson 14 Oct '11

14 Oct '11

Hello, I recently upgraded stunnel from 4.33 to 4.43 and immediately noticed problems with a particular client trying to connect to my servers. It appears that the client only supports SSLv2 (about which I will be talking to the client developers). In reviewing the stunnel release notes, I find that "!SSLv2" was first added to the default ciphers value in 4.37 and was retained in the default ciphers value in 4.40. What I am trying to find out at this point is what the default cipher list would have been under 4.33. I have grep'd the sources and found STUNNEL_CIPHER_LIST in options.c for 4.43, but there is no corresponding default ciphers config in 4.33. It *appears* that 4.33 is inheriting its default ciphers from whatever the installed OpenSSL uses by default. Is that correct? If I set ciphers to "ALL" under 4.43 would the running stunnel be using the same cipher list as the 4.33 build we were running previously? Thanks, Brian P.S. - No need to discuss the wisdom of our cipher list at the moment... I just want to get this client functioning and then worry about The Right Thing To Do.

1 0

Why 6 processes for single client-mode service configuration?
by Grant Edwards 12 Oct '11

12 Oct '11

I'm configuring stunnel to encrypt a single client-mode connection: client = yes foreground = yes syslog = yes pid = [stunnel-localhost] accept = localhost:4608 connect = localhost:4606 Why does that result in _six_ stunnel processes? [one parent and 5 children]? It's going to look a ridiculous if I have four instances like that configured and end up with _24_ stunnel processes. I can see two processes (one for data flowing in each direction) but six seems way overboard. -- Grant Edwards grant.b.edwards Yow! I feel like a wet at parking meter on Darvon! gmail.com

3 7

Stunnel 4.44 sendproxy patch
by Mark Janssen 11 Oct '11

11 Oct '11

Hi, I've updated the sendproxy patch from (http://haproxy.1wt.eu/ and http://haproxy.1wt.eu/download/patches/stunnel-4.33-exceliance-aloha-sendpr…) to stunnel 4.44 I'd appreciate it if this patch would be included in stunnel proper. -- Mark Janssen -- maniac(at)maniac.nl Unix / Linux Open-Source and Internet Consultant Maniac.nl Sig-IO.nl Vps.Stoned-IT.com

1 0

stunnel 4.35 hangs on slackware64 13.37
by crocket 11 Oct '11

11 Oct '11

If I rotate stunnel logs with logrotate and have logrotate send SIGUSR1 signal to stunnel, stunnel doesn't close and reopen a new log and hangs. If I rotate stunnel logs and have logrotate send SIGHUP to stunnel, stunnel writes two lines to a new log but hangs after then. It could be a CPU problem because my D525 ATOM CPU had a problematic history with other programs. But I'm not sure of this. Can anybody else reproduce the problem?

1 1

problem with configure
by JOSE 05 Oct '11

05 Oct '11

I am trying to compile /stunnel-4.04 and I am having this problem with the configure exiting because opf something it can not set bash-3.2# export LD_LIBRARY_PATH=/lib/:/usr/lib/:/usr/local/lib/:/usr/local/lib/hpux32/:/usr/local/include/:/opt/gtk2.6/lib/:/opt/openssl/0.9.8/lib/ bash-3.2# ./configure checking for a BSD-compatible install... auto/install-sh -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... missing checking for working autoconf... missing checking for working automake... missing checking for working autoheader... missing checking for working makeinfo... missing checking build system type... ia64-hp-hpux11.31 checking host system type... ia64-hp-hpux11.31 checking for gcc... no checking for cc... cc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... no checking whether cc accepts -g... yes checking for a BSD-compatible install... auto/install-sh -c checking whether make sets ${MAKE}... (cached) yes checking for non-GNU ld... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... no checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -p checking whether ln -s works... yes checking how to recognise dependant libraries... file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library checking command to parse /usr/bin/nm -p output... ok checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for ranlib... ranlib checking for strip... strip checking for objdir... .libs checking for cc option to produce PIC... +Z checking if cc PIC flag +Z works... yes checking if cc static flag -Wl,-a -Wl,archive works... no checking if cc supports -c -o file.o... no checking if we can lock with hard links... yes checking whether the linker (/usr/bin/ld) supports shared libraries... yes checking how to hardcode library paths into programs... relink checking whether stripping libraries is possible... no checking dynamic linker characteristics... hpux11.31 dld.sl checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool checking for SSL directory... /usr checking for "/dev/urandom"... yes checking whether to disable RSA support... no checking whether to enable DH support... no checking for gethostbyname in -lnsl... yes checking for socket in -lsocket... no checking for pthread_create in -lpthread... yes checking for pthread_create in -lc_r... no checking for openpty in -lutil... no checking whether to use the libwrap (TCP wrappers) library... (default) checking for hosts_access in -lwrap... yes checking for RSAref library... no checking for "/dev/ptmx"... yes checking for "/dev/ptc"... no checking for unistd.h... (cached) yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking tcpd.h usability... yes checking tcpd.h presence... yes checking for tcpd.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking util.h usability... no checking util.h presence... no checking for util.h... no checking pty.h usability... no checking pty.h presence... no checking for pty.h... no checking stropts.h usability... yes checking stropts.h presence... yes checking for stropts.h... yes checking sys/filio.h usability... no checking sys/filio.h presence... no checking for sys/filio.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking for snprintf... yes checking for vsnprintf... yes checking for openpty... no checking for _getpty... no checking for daemon... no checking for waitpid... yes checking for wait4... yes checking for sysconf... yes checking for getrlimit... yes checking for pthread_sigmask... yes checking for setgroups... yes checking for localtime_r... yes checking for chroot... yes checking for endhostent... yes checking for unsigned char... yes checking size of unsigned char... configure: error: cannot compute sizeof (unsigned char), 77 I've been reading around and this seems to be a problem with libiconv, but I have it installed, I have attached the configure.log for review bash-3.2# swlist -l product|grep -i lib Libiconv 1.6.1.16 Libiconv - Character set conversion library libiconv 1.12 libiconv I dont wkat else is missing, I am running this on HP-UX 11.31, I would appreciate in advance any help or hints, thanks folks Jose

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users