- stunnel-users - stunnel.org

Is local mode on WIN32 working?
by Joerg Behrend 09 Apr '11

09 Apr '11

The changelog of stunnel 4.33 states that "Experimental support for local mode on WIN32 platform" is working and that should be tried exec = c:\windows\system32\cmd.exe In practice, it is for me not working, a connection is accepted but always reset with the stunnel log message: readsocket: Connection reset by peer (WSAECONNRESET) (10054) It was tested using the 4.35 Windows installer. Are there other requirements or settings necessary? Is a recompilation with special options senseful? Thanks! Joerg

1 0

issue making stunnel 4.35 use an apache http proxy to go out?
by Matt Wise 08 Apr '11

08 Apr '11

I've got an Apache proxy on port 3128 that will allow our clients to get outbound with a 'CONNECT" to a few services.. I'm trying to make stunnel use this service, and it seems to be ignoring my configuration completely. Tcpdumps show NO packets going outbound on port 3128... any ideas what i'm doing wrong? This config allows an inbound connection to port 1234 to hit port 2345 (a local service), while also handling the setup of an inbound connection to localhost:514 to a remote host on port 1514... debug = 7 pid = /var/run/stunnel.pid service = stunnel syslog = yes foreground = no socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 fips = no # Localhost:1234 hits localhost:2345 [cseservices] client = no accept = 1234 connect = 127.0.0.1:2345 CAfile = /etc/stunnel/ssl/tunnel-CAs.cert.pem cert = /etc/stunnel/ssl/server.pub key = /etc/stunnel/ssl/server.key verify = 2 ## Localhost:514 hits remotehost:1514 [syslog] client = yes accept = 514 connect = xxx:1514 CAfile = /var/lib/puppet/ssl/certs/ca.pem key = /var/lib/puppet/ssl/private_keys/xxx.pem cert = /var/lib/puppet/ssl/certs/xxx.pem session = 5 TIMEOUTidle = 600 TIMEOUTbusy = 600 TIMEOUTclose = 300 TIMEOUTconnect = 10 verify = 2 protocol=connect protocolHost=proxy:3128 protocolAuthentication=basic —Matt

1 1

Re: [stunnel-users] stunnel through elb.. need packets sent semi-frequently
by Leandro Avila 08 Apr '11

08 Apr '11

Hi I'm not sure this will work, but have you checked the option TIMEOUTidle = <num_seconds> ? Sounds to me like the setting you might be looking for ----------------- Leandro Avila ----- Original Message ----- From:Matt Wise <mwise(a)netflix.com> To:"stunnel-users(a)stunnel.org" <stunnel-users(a)stunnel.org> Cc: Sent:Thursday, April 7, 2011 6:04 PM Subject:Re: [stunnel-users] stunnel through elb.. need packets sent semi-frequently I'm using stunnel to pass some data through an Amazon ELB. Unfortunately, there are times when the session times out due to packets not passing for 60 seconds (an amazon ELB timeout). I'm wondering whether theres some way I can configure stunnel itself to pass some whitespaces or something back and forth every few seconds to make sure the session stays open and live? (and yes, I'm posing the same question to the app developer who's ap we're passing through.. but I'm looking at both avenues.. ) _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users

3 2

stunnel through elb.. need packets sent semi-frequently
by Matt Wise 08 Apr '11

08 Apr '11

I'm using stunnel to pass some data through an Amazon ELB. Unfortunately, there are times when the session times out due to packets not passing for 60 seconds (an amazon ELB timeout). I'm wondering whether theres some way I can configure stunnel itself to pass some whitespaces or something back and forth every few seconds to make sure the session stays open and live? (and yes, I'm posing the same question to the app developer who's ap we're passing through.. but I'm looking at both avenues.. )

2 2

Re: [stunnel-users] STunnel server handshake fails
by Leandro Avila 08 Apr '11

08 Apr '11

Hello, I think you probably want to use the sslVersion = TLSv1 setting in your configuration. Instead of the options for OpenSSL Hope that helps ----------------- Leandro Avila ________________________________ From: John C. Kadyk <jckadyk(a)pacbell.net> To: stunnel-users(a)stunnel.org Sent: Thursday, April 7, 2011 7:06 PM Subject: Re: [stunnel-users] STunnel server handshake fails STunnel server handshake fails I'm trying to set up STunnel so our non-SSL network scanner can email scans through our email server, which requires TLS. A desktop email client with the same server/port settings can send email OK. I think I have STunnel configured correctly, but there's a handshake failure when it tries to connect to the server. STunnel seems to be attempting an SSLv3 connection even though I turned that option off in the config file. I want to force it to use TLS but not sure how to do that. Any suggestions greatly appreciated. Here's the config file: cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS options = NO_SSLv2 options = NO_SSLv3 ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 1025 connect = mail022-1.exch022.serverdata.net:1025 <http://mail022-1.exch022.serverdata.net:1025> ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini and here's the log: 2011.04.07 16:41:04 LOG5[3744:516]: Reading configuration from file stunnel.conf 2011.04.07 16:41:04 LOG7[3744:516]: Snagged 64 random bytes from C:/.rnd 2011.04.07 16:41:04 LOG7[3744:516]: Wrote 1024 new random bytes to C:/.rnd 2011.04.07 16:41:04 LOG7[3744:516]: PRNG seeded successfully 2011.04.07 16:41:04 LOG7[3744:516]: Configuration SSL options: 0x03000000 2011.04.07 16:41:04 LOG7[3744:516]: SSL options set: 0x03000004 2011.04.07 16:41:04 LOG7[3744:516]: Certificate: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Certificate loaded 2011.04.07 16:41:04 LOG7[3744:516]: Key file: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Private key loaded 2011.04.07 16:41:04 LOG7[3744:516]: SSL context initialized for service pop3s 2011.04.07 16:41:04 LOG7[3744:516]: Configuration SSL options: 0x03000000 2011.04.07 16:41:04 LOG7[3744:516]: SSL options set: 0x03000004 2011.04.07 16:41:04 LOG7[3744:516]: Certificate: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Certificate loaded 2011.04.07 16:41:04 LOG7[3744:516]: Key file: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Private key loaded 2011.04.07 16:41:04 LOG7[3744:516]: SSL context initialized for service imaps 2011.04.07 16:41:04 LOG7[3744:516]: Configuration SSL options: 0x03000000 2011.04.07 16:41:04 LOG7[3744:516]: SSL options set: 0x03000004 2011.04.07 16:41:04 LOG7[3744:516]: Certificate: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Certificate loaded 2011.04.07 16:41:04 LOG7[3744:516]: Key file: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Private key loaded 2011.04.07 16:41:04 LOG7[3744:516]: SSL context initialized for service ssmtp 2011.04.07 16:41:04 LOG5[3744:516]: Configuration successful 2011.04.07 16:41:04 LOG5[3744:516]: No limit detected for the number of clients 2011.04.07 16:41:04 LOG7[3744:516]: accept socket: FD=136 allocated (non-blocking mode) 2011.04.07 16:41:04 LOG7[3744:516]: Option SO_REUSEADDR set on accept socket 2011.04.07 16:41:04 LOG7[3744:516]: Service pop3s bound to 0.0.0.0:995 <http://0.0.0.0:995> 2011.04.07 16:41:04 LOG7[3744:516]: Service pop3s opened FD=136 2011.04.07 16:41:04 LOG7[3744:516]: accept socket: FD=124 allocated (non-blocking mode) 2011.04.07 16:41:04 LOG7[3744:516]: Option SO_REUSEADDR set on accept socket 2011.04.07 16:41:04 LOG7[3744:516]: Service imaps bound to 0.0.0.0:993 <http://0.0.0.0:993> 2011.04.07 16:41:04 LOG7[3744:516]: Service imaps opened FD=124 2011.04.07 16:41:04 LOG7[3744:516]: accept socket: FD=148 allocated (non-blocking mode) 2011.04.07 16:41:04 LOG7[3744:516]: Option SO_REUSEADDR set on accept socket 2011.04.07 16:41:04 LOG7[3744:516]: Service ssmtp bound to 0.0.0.0:1025 <http://0.0.0.0:1025> 2011.04.07 16:41:04 LOG7[3744:516]: Service ssmtp opened FD=148 2011.04.07 16:41:04 LOG5[3744:516]: stunnel 4.35 on x86-pc-mingw32-gnu with OpenSSL 1.0.0c 2 Dec 2010 2011.04.07 16:41:04 LOG5[3744:516]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2011.04.07 16:41:17 LOG7[3744:2436]: local socket: FD=232 allocated (non-blocking mode) 2011.04.07 16:41:17 LOG7[3744:2436]: Service ssmtp accepted FD=232 from 10.10.17.57:49968 <http://10.10.17.57:49968> 2011.04.07 16:41:17 LOG7[3744:2436]: Creating a new thread 2011.04.07 16:41:17 LOG7[3744:2436]: New thread created 2011.04.07 16:41:17 LOG7[3744:4012]: Service ssmtp started 2011.04.07 16:41:17 LOG7[3744:4012]: Option TCP_NODELAY set on local socket 2011.04.07 16:41:17 LOG5[3744:4012]: Service ssmtp accepted connection from 10.10.17.57:49968 <http://10.10.17.57:49968> 2011.04.07 16:41:17 LOG7[3744:4012]: remote socket: FD=268 allocated (non-blocking mode) 2011.04.07 16:41:17 LOG6[3744:4012]: connect_blocking: connecting 64.78.22.98:1025 <http://64.78.22.98:1025> 2011.04.07 16:41:17 LOG5[3744:4012]: connect_blocking: connected 64.78.22.98:1025 <http://64.78.22.98:1025> 2011.04.07 16:41:17 LOG5[3744:4012]: Service ssmtp connected remote server from 10.10.17.249:4081 <http://10.10.17.249:4081> 2011.04.07 16:41:17 LOG7[3744:4012]: Remote FD=268 initialized 2011.04.07 16:41:17 LOG7[3744:4012]: Option TCP_NODELAY set on remote socket 2011.04.07 16:41:17 LOG7[3744:4012]: SSL state (connect): before/connect initialization 2011.04.07 16:41:17 LOG7[3744:4012]: SSL state (connect): SSLv3 write client hello A 2011.04.07 16:41:17 LOG7[3744:4012]: SSL alert (write): fatal: handshake failure 2011.04.07 16:41:17 LOG3[3744:4012]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2011.04.07 16:41:17 LOG5[3744:4012]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2011.04.07 16:41:17 LOG7[3744:4012]: Service ssmtp finished (0 left) Any suggestions greatly appreciated. Thanks! John _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

STunnel server handshake fails
by John C. Kadyk 08 Apr '11

08 Apr '11

I'm trying to set up STunnel so our non-SSL network scanner can email scans through our email server, which requires TLS. A desktop email client with the same server/port settings can send email OK. I think I have STunnel configured correctly, but there's a handshake failure when it tries to connect to the server. STunnel seems to be attempting an SSLv3 connection even though I turned that option off in the config file. I want to force it to use TLS but not sure how to do that. Any suggestions greatly appreciated. Here's the config file: cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS options = NO_SSLv2 options = NO_SSLv3 ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 1025 connect = mail022-1.exch022.serverdata.net:1025 <http://mail022-1.exch022.serverdata.net:1025> ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini and here's the log: 2011.04.07 16:41:04 LOG5[3744:516]: Reading configuration from file stunnel.conf 2011.04.07 16:41:04 LOG7[3744:516]: Snagged 64 random bytes from C:/.rnd 2011.04.07 16:41:04 LOG7[3744:516]: Wrote 1024 new random bytes to C:/.rnd 2011.04.07 16:41:04 LOG7[3744:516]: PRNG seeded successfully 2011.04.07 16:41:04 LOG7[3744:516]: Configuration SSL options: 0x03000000 2011.04.07 16:41:04 LOG7[3744:516]: SSL options set: 0x03000004 2011.04.07 16:41:04 LOG7[3744:516]: Certificate: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Certificate loaded 2011.04.07 16:41:04 LOG7[3744:516]: Key file: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Private key loaded 2011.04.07 16:41:04 LOG7[3744:516]: SSL context initialized for service pop3s 2011.04.07 16:41:04 LOG7[3744:516]: Configuration SSL options: 0x03000000 2011.04.07 16:41:04 LOG7[3744:516]: SSL options set: 0x03000004 2011.04.07 16:41:04 LOG7[3744:516]: Certificate: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Certificate loaded 2011.04.07 16:41:04 LOG7[3744:516]: Key file: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Private key loaded 2011.04.07 16:41:04 LOG7[3744:516]: SSL context initialized for service imaps 2011.04.07 16:41:04 LOG7[3744:516]: Configuration SSL options: 0x03000000 2011.04.07 16:41:04 LOG7[3744:516]: SSL options set: 0x03000004 2011.04.07 16:41:04 LOG7[3744:516]: Certificate: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Certificate loaded 2011.04.07 16:41:04 LOG7[3744:516]: Key file: stunnel.pem 2011.04.07 16:41:04 LOG7[3744:516]: Private key loaded 2011.04.07 16:41:04 LOG7[3744:516]: SSL context initialized for service ssmtp 2011.04.07 16:41:04 LOG5[3744:516]: Configuration successful 2011.04.07 16:41:04 LOG5[3744:516]: No limit detected for the number of clients 2011.04.07 16:41:04 LOG7[3744:516]: accept socket: FD=136 allocated (non-blocking mode) 2011.04.07 16:41:04 LOG7[3744:516]: Option SO_REUSEADDR set on accept socket 2011.04.07 16:41:04 LOG7[3744:516]: Service pop3s bound to 0.0.0.0:995 <http://0.0.0.0:995> 2011.04.07 16:41:04 LOG7[3744:516]: Service pop3s opened FD=136 2011.04.07 16:41:04 LOG7[3744:516]: accept socket: FD=124 allocated (non-blocking mode) 2011.04.07 16:41:04 LOG7[3744:516]: Option SO_REUSEADDR set on accept socket 2011.04.07 16:41:04 LOG7[3744:516]: Service imaps bound to 0.0.0.0:993 <http://0.0.0.0:993> 2011.04.07 16:41:04 LOG7[3744:516]: Service imaps opened FD=124 2011.04.07 16:41:04 LOG7[3744:516]: accept socket: FD=148 allocated (non-blocking mode) 2011.04.07 16:41:04 LOG7[3744:516]: Option SO_REUSEADDR set on accept socket 2011.04.07 16:41:04 LOG7[3744:516]: Service ssmtp bound to 0.0.0.0:1025 <http://0.0.0.0:1025> 2011.04.07 16:41:04 LOG7[3744:516]: Service ssmtp opened FD=148 2011.04.07 16:41:04 LOG5[3744:516]: stunnel 4.35 on x86-pc-mingw32-gnu with OpenSSL 1.0.0c 2 Dec 2010 2011.04.07 16:41:04 LOG5[3744:516]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2011.04.07 16:41:17 LOG7[3744:2436]: local socket: FD=232 allocated (non-blocking mode) 2011.04.07 16:41:17 LOG7[3744:2436]: Service ssmtp accepted FD=232 from 10.10.17.57:49968 <http://10.10.17.57:49968> 2011.04.07 16:41:17 LOG7[3744:2436]: Creating a new thread 2011.04.07 16:41:17 LOG7[3744:2436]: New thread created 2011.04.07 16:41:17 LOG7[3744:4012]: Service ssmtp started 2011.04.07 16:41:17 LOG7[3744:4012]: Option TCP_NODELAY set on local socket 2011.04.07 16:41:17 LOG5[3744:4012]: Service ssmtp accepted connection from 10.10.17.57:49968 <http://10.10.17.57:49968> 2011.04.07 16:41:17 LOG7[3744:4012]: remote socket: FD=268 allocated (non-blocking mode) 2011.04.07 16:41:17 LOG6[3744:4012]: connect_blocking: connecting 64.78.22.98:1025 <http://64.78.22.98:1025> 2011.04.07 16:41:17 LOG5[3744:4012]: connect_blocking: connected 64.78.22.98:1025 <http://64.78.22.98:1025> 2011.04.07 16:41:17 LOG5[3744:4012]: Service ssmtp connected remote server from 10.10.17.249:4081 <http://10.10.17.249:4081> 2011.04.07 16:41:17 LOG7[3744:4012]: Remote FD=268 initialized 2011.04.07 16:41:17 LOG7[3744:4012]: Option TCP_NODELAY set on remote socket 2011.04.07 16:41:17 LOG7[3744:4012]: SSL state (connect): before/connect initialization 2011.04.07 16:41:17 LOG7[3744:4012]: SSL state (connect): SSLv3 write client hello A 2011.04.07 16:41:17 LOG7[3744:4012]: SSL alert (write): fatal: handshake failure 2011.04.07 16:41:17 LOG3[3744:4012]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2011.04.07 16:41:17 LOG5[3744:4012]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2011.04.07 16:41:17 LOG7[3744:4012]: Service ssmtp finished (0 left) Any suggestions greatly appreciated. Thanks! John

1 0

Can't get transparent mode to work from remote IP
by Ben Schmidt 02 Apr '11

02 Apr '11

Hello stunnel Mailinglist, I'm new to stunnel and so far it works just fine. What impressed me the most is that is faster then Apache's mod_ssl. My only Problem is that I can't get stunnel to work in transparent mode. When I try to access it from a remote IP I get timeouts connecting to the Non-SSL Server. I'm prettymuch relying on the manual in section "transparent": http://www.stunnel.org/static/stunnel.html Scenario: local 10.0.0.0/22 > Server with stunnel (10.0.3.48/22) > local apache My config: http://pastebin.com/BQmXeT5b Log: http://pastebin.com/enQTAWB9 "stunnel -sockets": http://pastebin.com/Zbz9FTr6 "iptables -L -v": http://pastebin.com/0b90Nay8 executing iptables, again: http://pastebin.com/T87cGPBX The apache listening on port 80 reporting hits from the Computers private IP but not from any remote IPs in the same network. Firewalls and stuff like that are not the Problem. The remote Computer can access port 80 without any Problems and it works fine when I switch from stunnel to apaches mod_ssl. My Testsetup is using 4.29 on ubuntu 10.10 GNU/Linux amd64 with kernel 2.6.35 and OpenSSL 0.9.8o Could anybody please point me in the rigth direction, I know that I'm missing something but I just can't figure it out. Thanks a lot, Ben

1 0

stunnel maximum clients to server
by bruce bushby 26 Mar '11

26 Mar '11

Hi I'm about to add stunnel to my buildroot embedded project (ARM926EJ-S) and I was hoping the list could answer a few performance questions? I've been looking for a way to encrypt the connections between my embedded units and my server. From what I understood about openvpn, the server starts to give problems beyond 1024 "concurrent sessions" .... I'm looking at a design that can handle 4K concurrent sessions....although it'll take a few years to get that big. My embedded devices have a GSM modem and setup a ppp0 interface over gprs. I'm considering stunnel in the hope that I could have up to 3000 stunnel connections coming into my servers. I say 3K because by the tike I reach this figure I hope to have implemented better switches and off load the overhead of the encrypted connection to the switch. The requirement is that the embedded "non-ssl aware client" will be able to communicate with the server over a secure tunnel. Am I completely on the wrong road? .... could stunnel cater for something like this? Thanks in advance!

3 2

Certificate request popup when clicking on MS Office links in a stunnel HTTPS redirect to Domino HTTP server?
by Josiah Fizer 25 Mar '11

25 Mar '11

We have a Lotus Domino server hosting some Microsoft Office documents. For improved security, I started using stunnel to redirect pacts from the HTTP servers via HTTPS. Everything works perfectly, however when a user clicks a document link they are prompted for login credentials or a certificate. This would seem to be because MS Office is trying to open the remote document in edit mode rather then downloading it locally or opening it in read mode. I've tried a number of stunnel configuration options but nothing seems to work. At current I am using the following simple configuration. Any insight into the issue would be appreciated. cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify=0 [https] accept = 443 connect = localhost:80 TIMEOUTclose = 0

1 0

Re: [stunnel-users] Windows Firewall has blocked some features of thisprogram
by jay＠experts-exchange.com 22 Mar '11

22 Mar '11

Hi Josealf, Thank you for your response and for this information. Is there a VB script or other method I can use for this purpose? I use a signed Java applet to download, install, and execute stunnel, but can insert a step to run a VB or other script on the host prior. I suspect the stunnel installer may do this already, but after looking, did not see anything. Thank you > You can add the required firewall exceptions as part of your installation > tasks. You just need to allow connections to the incoming port(s) your > stunnel config use. > > -----Original Message----- > From: jay(a)experts-exchange.com > Sender: stunnel-users-bounces(a)stunnel.org > Date: Mon, 21 Mar 2011 17:39:11 > To: <stunnel-users(a)stunnel.org> > Subject: [stunnel-users] Windows Firewall has blocked some features of > this > program > > Folks, > > While bundling stunnel with my user application, upon kick off I see this > error message.*1 Is there a way to avoid this security warning? I am > trying to figure out if signing the binaries will escape this situation, > or if it is related to the binary not containing a string table. I > investigated linking the win32 binary with MS Visual Studio 2005 to see > if > the presence of the version string info in the binary would help*2, but > so > far I have been unable to directly link. I originally built stunnel using > cygwin's mingw32-gcc*3, so linking using MSDEV is not too easy.*4 > > Thanks > > > Refs: > *1 "Windows Security Alert. To help protect your computer, Windows > Firewall has blocked some features of this program. Do you want to keep > blocking this program? Name: stunnel Publisher: Unknown" > > *2 stunnel/src/version.rc, > > // pdelaage TODO 20101111: this file works with MS VC / EVC > // But with MINGW, properties are NOT displayed in Windows Explorer > // although they are embedded in the final exe program. > // anyway, using a .o coming from MS VC does not change anything, > // and linking the gcc version.o with ms tools works! > // so the problem is in fact in gcc-linking, not in version.o. > > > *2 mingw64-i686-gcc-core 4.5.1-2 > > Administrator@MSDN-2005-DEV /cygdrive/c/dl/stunnel/stunnel-4.35/src > $ i686-w64-mingw32-gcc-4.5.1 -s -o stunnel.exe file.obj client.obj > log.obj > options.obj protocol.obj network.obj resolver.obj ssl.obj ctx.obj > verify.obj sthreads.obj stunnel.obj gui.obj resources.obj > -L/cygdrive/c/openssl/lib -L/cygdrive/c/dl/stunnel/zlib-1.2.5 > -lcrypto.dll > -lssl.dll -lz -lws2_32 -lgdi32 -mwindows -v > Using built-in specs. > COLLECT_GCC=i686-w64-mingw32-gcc-4.5.1 > COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-w64-mingw32/4.5.1/lto-wrapper.exe > Target: i686-w64-mingw32 > Configured with: > /cygdrive/c/nnnew/gcc32/mingw64-i686-gcc-4.5.1-2/src/gcc-4.5.1/configure > --srcdir=/cygdrive/c/nnnew/gcc32/mingw64-i686-gcc-4.5.1-2/src/gcc-4.5.1 > --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin > --libexecdir=/usr/lib --datadir=/usr/share --localstatedir=/var > --sysconfdir=/etc --datarootdir=/usr/share > --docdir=/usr/share/doc/mingw64-i686-gcc -C --build=i686-pc-cygwin > --host=i686-pc-cygwin --target=i686-w64-mingw32 > --with-sysroot=/usr/i686-w64-mingw32/sys-root > --with-build-sysroot=/usr/i686-w64-mingw32/sys-root --disable-multilib > --disable-win32-registry > --enable-languages=c,ada,c++,fortran,objc,obj-c++ > --enable-fully-dynamic-strings --enable-libgomp --enable-sjlj-exceptions > --enable-version-specific-runtime-libs --with-dwarf2 > --enable-decimal-float=bid --enable-lto > Thread model: win32 > gcc version 4.5.1 (GCC) > COMPILER_PATH=/usr/lib/gcc/i686-w64-mingw32/4.5.1/:/usr/lib/gcc/i686-w64-mingw32/4.5.1/:/usr/lib/gcc/i686-w64-mingw32/:/usr/lib/gcc/i686-w64-mingw32/4.5.1/:/usr/lib/gcc/i686-w64-mingw32/:/usr/lib/gcc/i686-w64-mingw32/4.5.1/../../../../i686-w64-mingw32/bin/ > LIBRARY_PATH=/usr/lib/gcc/i686-w64-mingw32/4.5.1/:/usr/lib/gcc/i686-w64-mingw32/4.5.1/../../../../i686-w64-mingw32/lib/../lib32/:/usr/lib/gcc/i686-w64-mingw32/4.5.1/../../../../i686-w64-mingw32/lib/:/usr/i686-w64-mingw32/sys-root/mingw/lib/ > COLLECT_GCC_OPTIONS='-s' '-o' 'stunnel.exe' '-L/cygdrive/c/openssl/lib' > '-L/cygdrive/c/dl/stunnel/zlib-1.2.5' '-mwindows' '-v' '-mtune=generic' > '-march=pentiumpro' > /usr/lib/gcc/i686-w64-mingw32/4.5.1/collect2.exe > --sysroot=/usr/i686-w64-mingw32/sys-root -m i386pe --subsystem windows > -Bdynamic -o stunnel.exe -s > /usr/i686-w64-mingw32/sys-root/mingw/lib/crt2.o > /usr/lib/gcc/i686-w64-mingw32/4.5.1/crtbegin.o -L/cygdrive/c/openssl/lib > -L/cygdrive/c/dl/stunnel/zlib-1.2.5 -L/usr/lib/gcc/i686-w64-mingw32/4.5.1 > -L/usr/lib/gcc/i686-w64-mingw32/4.5.1/../../../../i686-w64-mingw32/lib/../lib32 > -L/usr/lib/gcc/i686-w64-mingw32/4.5.1/../../../../i686-w64-mingw32/lib > -L/usr/i686-w64-mingw32/sys-root/mingw/lib file.obj client.obj log.obj > options.obj protocol.obj network.obj resolver.obj ssl.obj ctx.obj > verify.obj sthreads.obj stunnel.obj gui.obj resources.obj -lcrypto.dll > -lssl.dll -lz -lws2_32 -lgdi32 -lmingw32 -lgcc_eh -lgcc -lmoldname > -lmingwex -lmsvcrt -lgdi32 -lcomdlg32 -luser32 -lkernel32 -ladvapi32 > -lshell32 -lmingw32 -lgcc_eh -lgcc -lmoldname -lmingwex -lmsvcrt > /usr/lib/gcc/i686-w64-mingw32/4.5.1/crtend.o > > Administrator@MSDN-2005-DEV /cygdrive/c/dl/stunnel/stunnel-4.35/src > $ > > *4 Link attempt under windows: > > C:\dl\stunnel\stunnel-4.35\src>link /libpath:"C:\openssl\lib" > /libpath:"c:\dl\stunnel\zlib-1.2.5" /machine:I386 /nologo > /out:"stunnel.exe" /incremental:no /release /mapinfo:exports > /subsystem:windows /opt:ref /opt:icf wsock32.lib kernel32.lib user32.lib > gdi32.lib comdlg32.lib advapi32.lib shell32.lib msvcrt.lib libcmt.lib > libcrypto.a libssl.a libz.a file.obj client.obj log.obj options.obj > protocol.obj network.obj resolver.obj ssl.obj ctx.obj verify.obj > sthreads.obj stunnel.obj gui.obj resources.obj > msvcrt.lib(_stat.obj) : warning LNK4078: multiple '.drectve' sections > found with different attributes (00000A00) > options.obj : error LNK2019: unresolved external symbol ___chkstk > referenced in function _parse_conf > gui.obj : error LNK2019: unresolved external symbol _strdup referenced in > function _WinMain@16 > libcrypto.a(asn_mime.o) : error LNK2001: unresolved external symbol > __alloca > libcrypto.a(bss_file.o) : error LNK2019: unresolved external symbol > __alloca referenced in function _BIO_new_file > libcrypto.a(cryptlib.o) : error LNK2001: unresolved external symbol > __alloca > libcrypto.a(err_prn.o) : error LNK2001: unresolved external symbol > __alloca > libcrypto.a(bn_prime.o) : error LNK2001: unresolved external symbol > __alloca > libcrypto.a(b_print.o) : error LNK2019: unresolved external symbol > ___umoddi3 referenced in function _fmtint > libcrypto.a(bn_word.o) : error LNK2001: unresolved external symbol > ___umoddi3 > libcrypto.a(b_print.o) : error LNK2019: unresolved external symbol > ___udivdi3 referenced in function _fmtint > stunnel.exe : fatal error LNK1120: 5 unresolved externals > > C:\dl\stunnel\stunnel-4.35\src> > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > http://stunnel.mirt.net/mailman/listinfo/stunnel-users >

2 1