stunnel-users

stunnel-users@stunnel.org

6 participants
3294 discussions

Access an arbitrary https website on http://localhost:3000 via stunnel.
by Hongyi Zhao 14 Jan '16

14 Jan '16

Hi all, Based on the descriptions on the following webpage: http://plug.org/pipermail/plug/2015-August/033939.html I do the following testing: 1- Complile and install the lastest stunnel, i.e., the stunnel-5.29. 2- Obtaining the root cert wget -q https://gist.githubusercontent.com/coolaj86/327cee3eee6fc119b389/raw/root.p… -O /tmp/root.pem 3- Prepare the following config file for stunnel: pid = /tmp/stunnel-tlsvpn.pid client = yes verify = 1 foreground = yes [tlsvpn] accept = localhost:3000 sni = coolaj86.com connect = coolaj86.com:443 CAfile = /tmp/root.pem 4- Starting the stunnel: $ stunnel ./stunnel-tlsvpn.conf 5- Testing: At this moment, I use the firefox to open the following url: http://localhost:3000 But the firefox will only give the following line in its windows: Cannot GET / Any hints on this issue? Regards -- Hongyi Zhao <hongyi.zhao(a)gmail.com> Xinjiang Technical Institute of Physics and Chemistry Chinese Academy of Sciences GnuPG DSA: 0xD108493

2 1

Re: [stunnel-users] Fwd: Stunnel log file format
by Ludolf Holzheid 12 Jan '16

12 Jan '16

On Tue, 2016-01-12 11:23:43 -0430, Jesús Alfredo Cambera wrote: > Hello Ludof, > > Thanks for answering so fast. I think this information would be really > useful for other users. I'd would be great if it could be included the the > manual page (https://www.stunnel.org/static/stunnel.html). > > I had just completed the logstash filters but still I have one last > question: What do the log levels correspond to: error, warning, info? Hi Alfredo, always answer to the list, so others may read along and/or chime in. >From the stunnel man page: >> >> Level is a one of the syslog level names or numbers emerg (0), alert (1), crit (2), >> err (3), warning (4), notice (5), info (6), or debug (7). All logs for the specified >> level and all levels numerically less than it will be shown. Use debug = debug or >> debug = 7 for greatest debugging output. The default is notice (5). This seems to perfectly match the 'conventional meaning of the log level' used for most POSIX system log daemons (e.g. the linux syslogd). I don't know how significant the level /names/ actually are - Maybe all you can read from this is that level 0 gives the fewest and level 7 gives the most messages. Ludolf -- Ludolf Holzheid Bihl+Wiedemann GmbH Floßwörthstraße 41 68199 Mannheim, Germany Tel: +49 621 33996-0 Fax: +49 621 3392239 mailto:lholzheid@bihl-wiedemann.de http://www.bihl-wiedemann.de Sitz der Gesellschaft: Mannheim Geschäftsführer: Jochen Bihl, Bernhard Wiedemann Amtsgericht Mannheim, HRB 5796

2 1

Fwd: Stunnel log file format
by Jesús Alfredo Cambera 12 Jan '16

12 Jan '16

Hi everybody, I'm pretty new on stunnel and I'm still learning a lot through the documentation. One of the tasks that i need to accomplish is to consolidate all the log information using logstash and ELK. So far I had managed to figure out most of the log file format. Here is an example of my log file 2013.01.11 11:26:35 LOG5[13520:140223486400256]: stunnel3 accepted connection from 127.0.0.1:45939 2013.01.11 11:26:35 LOG6[13520:140223486400256]: connect_blocking: connecting 123.4.5.6:9130 2013.01.11 11:26:35 LOG5[13520:140223486498560]: connect_blocking: connected 7.8.9.10:9130 The first two fields are date and hour but I don't understand what do the next field means (LOG5, LOG6). Next is the pid, but I don't know anything about the next field. The last one is the error explanation. Is there documentation about log file format? I'd really appreciate your help. Greetings from Venezuela, Alfredo

2 1

Re: [stunnel-users] Help: sTunnel http to Apache https?
by Hathor27 11 Jan '16

11 Jan '16

Please everybody out there, can anybody tell me, if I can wrap a http-proxy request into http over ssl (https, with sTunnel) and receive it by an Apache https server (without sTunnel server)? Best regards Hathor27

1 0

stunnel 5.29 released
by Michal Trojnara 08 Jan '16

08 Jan '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Dear Users, I have released version 5.29 of stunnel. The ChangeLog entry: Version 5.29, 2016.01.08, urgency: LOW * New features - New WIN32 icons. - Performance improvement: rwlocks used for locking with pthreads. * Bugfixes - Compilation fix for *BSD. - Fixed configuration file reload for relative stunnel.conf path on Unix. - Fixed ignoring CRLfile unless CAfile was also specified (thx to Strukov Petr). Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 43909625403ea634fa7cb8399d58faf8e7f11c1b7b29097491469951f56df551 stunnel-5.29.tar.gz c92ccc98cc9eb0c5d95d9550af39ab502e7ea45ed4d9ccc821aa261856f958b1 stunnel-5.29-installer.exe f9db8676e8e2ec6db355bae41eb625eb8ebd45a836ad8cbf06ce60a3c305fde2 stunnel-5.29-android.zip Best regards, Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAEBCAAGBQJWj/AqAAoJEC78f/DUFuAUZagQAMbBLW8VSgB8x8WGK1ZueSun HJAqXQgCYFY3+Vdz/41gdGy4T8kMB0MHarCwUbI4Wuk/JEvJLIs7OtFzycm1pTBU vXOgk962OkKs/RGD6tygnzIMmYU+BjxPLcfuj0JZR8Z3/Skt2ssFh4RrgCwoFM7/ VxseTRf487dBTU8n2EduWS1naNSIZCN6MlM0Ql1NNenZIGUSYlOfpxXSYo2ZTbe9 At+oVJ5J23eZrv5Vd48cZY7ArfXqCFDkUsCVyBOjUoSSJQ3qZ7srr7tWj4AVY6Pp Nk4Q1w1o7vWpEMDovjEmiLJMUGY2AUiQMpKoZDyfTnDRdtEfEDb7+P9sa++sruSY uauMZ4IL2zjUhWh2RJVnYHgCYCvjAWVw3GeUoM092svR0NXqf0fnBqAGgXNA/uHg zXy2Ljp8yLSK73oR3z7BaSmM3+q1NS2fZBEfWOVpZoOdG+hoyCZvsvuvDpNXh+y8 7WBPiGMl+Umti8HxKDsF/HEiLoSRrBZFZ1t2jwmLM+kZAsA06j3s5ExttK+FNsSC s/yoISPBGIRJyM/xOwYugyO2mDI8xLm3w7YbJADlJ0R2UiaRFVRqJErITv1/i18c Xek1mhk6HgyhQSCns4gxjM/Xc3VuOGJCP6umwUuiXQvyHvP+oypAyYlgshxNmKD1 Ccn+1DCtt3jw83qNLrZE =yIQ7 -----END PGP SIGNATURE-----

1 0

Re: [stunnel-users] Help: sTunnel http to Apache https?
by Hathor27 05 Jan '16

05 Jan '16

Thank you for your fast response, Jhon. My target https-server is a Synology DS211+ with Apache 2.2(Unix). Its VirtualHost config looks like: <VirtualHost *:443> ServerName myhost.mydomain.com ServerAlias internal.name.local DocumentRoot /somepath/not/used/at/all/ SSLEngine On SSLProtocol all -SSLv2 -SSLv3 # TLSv1 or higher SSLProxyEngine On ProxyRequests On ProxyBadHeader Ignore ProxyVia Full AllowCONNECT myInternalPort <Proxy *> Order deny,allow Deny from all </Proxy> <ProxyMatch (internal\.name\.local)> Order allow,deny Allow from all </ProxyMatch> LogLevel debug ErrorLog /logpath/sshserver-proxy_error_log CustomLog /logpath/sshserver-proxy_request_log combined </VirtualHost> The sTunnel client config on Win7 is: debug = 7 log = overwrite output = C:\userpath\stunnel\stunnel.log socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 client = yes [http-2-ssl] accept = 127.0.0.1:80 connect = proxy.gateway:gwPort protocol = connect protocolHost = myhost.mydomain.com:443 retry = yes config = Protocol:ALL config = Protocol:-SSLv3 Finally still remains my initial question: Can I wrap my http-proxy request into http over ssl (https) and receive it on an Apache https server? If 'yes', how? Best regards Hathor27 Btw: Hopefully better posted

1 0

Upcoming stunnel 5.29 release
by Michal Trojnara 05 Jan '16

05 Jan '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Guys, This Friday I intend to release stunnel 5.29. The planned list of changes: * New features - New WIN32 icons. - Performance improvement: rwlocks used for locking with pthreads. * Bugfixes - Compilation fix for *BSD. - Fixed configuration file reload for relative stunnel.conf path on Unix. - Fixed ignoring CRLfile unless CAfile was also specified (thx to Strukov Petr). Feel free to try stunnel 5.29b3, so I can fix any discovered issues before the final release: https://www.stunnel.org/downloads.html Best regards, Mike -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBCAAGBQJWit/iAAoJEC78f/DUFuAUtv8P/izyH0DIhUsDCWbYlyWRJDjr 2lwE1sYwmmMqtArM31N25QtRidEbZgTbuWQXaXY7/HALTnnI1VbDrbtAntVkovQr FDXGlVvkife2IuSDS92b8ezEuq5swCQoT6KoHJDj9yLBSTQdZNxGHv9GfbS90mmv fX3zcWmh+SklYnVgGrnc3GfgecaUS261KArdW1BTfA5ucydzse9z9X+2/iA7zl7i wwvSHkfH3+Q3VsmJaSmoHTiMqzRzvH0NpKnbm0J5OfOql/fT9Mfn57U5ZGnC5iWP bLlPmmP+fC7WLX8Cwl2DWESJ8kxPn2xEJbDGeCn9uzI0feKXMLwF/yrJopYVetIx fJDgts4iR8eFRcFcSIpBrnWxNoTi4RhCzuIj8U/zYOBsHJPs6gPcuDG9fYtPXhF8 D93e8HeOW7naNyi+mTDjBo8qdiGGh+/ITp1PkNonVgFCWkxLIpfS2k6iQ/DqNTXd szMU+uLeub5vt3ifRnSieTpIDTAsSbp0jarlXFRQNrUB0Cl8sgv/Ssl+ZYnDRyIa 2aTrK00eSc1nk+kZGJg5kTJM/t6PzfxtDUhVo5Pr6u9gwa94c34AHQ04W5dA7rTV 4pD4DxpFEk+2Syndjt6lncT/O2at3aYUkhyTZ/tN8/P22v1OWp+ci1WIpNXp/zVX z12IUAFfyQPIuvdwLzZr =CEXd -----END PGP SIGNATURE-----

2 4

Help: sTunnel http to Apache https?
by Hathor27 02 Jan '16

02 Jan '16

Dear List Members, I searched, tried and recovered for several days and found no solution that works. My topic is to establish an ssh remote session through a http-proxy (http connect). In case of port restrictions I can only use pure https (443). So I try to wrap my http-proxy request into http over ssl (https) and receive it on an Apache https server. I can establish a connection between sTunnel Client (Win7 Prof) and sTunnel Server (Synology, Linux), both on 443 - that works fine. But if I try to connect from sTunnel Client (443) to Apache Server https, they seem to speek not the same protocol. .are there any examples for that? - or are sTunnel and Apache two different things of SSL? I would be very glad to get some help here :) Best Regards Hathor27

1 0

Do Not Make Stunnel on El Capitan
by WATANABE Takeo 02 Jan '16

02 Jan '16

Dear all. Hi. My name is WATANABE, Takeo in Japan. There is a thing that is very troubled, it will post to this ML. It is in OS X El Capitan(10.11.x), it is stunnel of make it is that does not pass. The rootkill mechanism I think is causing, but tried again to disable this, even doing several times, not as make is. Even latest Stunnel, make will fail. Where everyone is, what you can well Build. If you have person there know what measures and successes such as a, please tell me. Warm Regards. Sincerely yours.

1 0

transfer: s_poll_wait: TIMEOUTclose exceeded: closing
by Michael Calder 29 Dec '15

29 Dec '15

Hi, I'm new to stunnel and I'm trying to troubleshoot why it currently isn't working. When I first set it up and tested it everything worked fine. I rebuilt everything to do it all again and now it's not working. I'm pretty sure I set everything up the same way. I'm trying to get it to work with AWS SES. Here is my stunnel config: ; Sample stunnel configuration file for Win32 by Michal Trojnara 2002-2015 ; Some options used here may be inadequate for your particular configuration ; This sample file does *not* represent stunnel.conf defaults ; Please consult the manual for detailed description of available options ; ************************************************************************** ; * Global options * ; ************************************************************************** ; Debugging stuff (may be useful for troubleshooting) debug = debug ;output = stunnel.log ; Enable FIPS 140-2 mode if needed for compliance ;fips = yes ; Microsoft CryptoAPI engine allows for authentication with private keys ; stored in the Windows certificate store ; Each section using this feature also needs the "engineId = capi" option ;engine = capi ; ************************************************************************** ; * Service defaults may also be specified in individual service sections * ; ************************************************************************** ; Enable support for the insecure SSLv3 protocol ;options = -NO_SSLv3 ; These options provide additional security at some performance degradation ;options = SINGLE_ECDH_USE ;options = SINGLE_DH_USE ; ************************************************************************** ; * Include all configuration file fragments from the specified folder * ; ************************************************************************** ;include = conf.d ; ************************************************************************** ; * Service definitions (at least one service has to be defined) * ; ************************************************************************** ; ***************************************** Example TLS client mode services [gmail-pop3] client = yes accept = 127.0.0.1:110 connect = pop.gmail.com:995 verify = 2 CAfile = ca-certs.pem checkHost = pop.gmail.com OCSPaia = yes [gmail-imap] client = yes accept = 127.0.0.1:143 connect = imap.gmail.com:993 verify = 2 CAfile = ca-certs.pem checkHost = imap.gmail.com OCSPaia = yes [gmail-smtp] client = yes accept = 127.0.0.1:25 connect = smtp.gmail.com:465 verify = 2 CAfile = ca-certs.pem checkHost = smtp.gmail.com OCSPaia = yes ; Encrypted HTTP proxy authenticated with a client certificate ; located in the Windows certificate store ;[example-proxy] ;client = yes ;accept = 127.0.0.1:8080 ;connect = example.com:8443 ;engineId = capi ; ***************************************** Example TLS server mode services ;[pop3s] ;accept = 995 ;connect = 110 ;cert = stunnel.pem ;[imaps] ;accept = 993 ;connect = 143 ;cert = stunnel.pem ;[ssmtp] ;accept = 465 ;connect = 25 ;cert = stunnel.pem ; TLS front-end to a web server ;[https] ;accept = 443 ;connect = 80 ;cert = stunnel.pem ; "TIMEOUTclose = 0" is a workaround for a design flaw in Microsoft SChannel ; Microsoft implementations do not use TLS close-notify alert and thus they ; are vulnerable to truncation attacks ;TIMEOUTclose = 0 ; Remote cmd.exe protected with PSK-authenticated TLS ; Create "secrets.txt" containing IDENTITY:KEY pairs ;[cmd] ;accept = 1337 ;exec = c:\windows\system32\cmd.exe ;execArgs = cmd.exe ;ciphers = PSK ;PSKsecrets = secrets.txt ; vim:ft=dosini [smtp-tls-wrapper] accept = 2525 client = yes connect = email-smtp.us-east-1.amazonaws.com:2465 delay = yes Here is the debug from the log file: 2015.12.29 17:42:38 LOG7[main]: No limit detected for the number of clients 2015.12.29 17:42:38 LOG5[main]: stunnel 5.28 on x86-pc-msvc-1500 platform 2015.12.29 17:42:38 LOG5[main]: Compiled/running with OpenSSL 1.0.2e-fips 3 Dec 2015 2015.12.29 17:42:38 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2015.12.29 17:42:38 LOG7[main]: errno: (*_errno()) 2015.12.29 17:42:38 LOG5[main]: Reading configuration from file stunnel.conf 2015.12.29 17:42:38 LOG5[main]: UTF-8 byte order mark detected 2015.12.29 17:42:38 LOG5[main]: FIPS mode disabled 2015.12.29 17:42:38 LOG7[main]: Compression disabled 2015.12.29 17:42:38 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2015.12.29 17:42:38 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd 2015.12.29 17:42:38 LOG7[main]: PRNG seeded successfully 2015.12.29 17:42:38 LOG6[main]: Initializing service [gmail-pop3] 2015.12.29 17:42:38 LOG7[ui]: GUI message loop initialized 2015.12.29 17:42:38 LOG7[cron]: Cron thread initialized 2015.12.29 17:42:38 LOG7[main]: No certificate or private key specified 2015.12.29 17:42:38 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2015.12.29 17:42:38 LOG6[main]: Initializing service [gmail-imap] 2015.12.29 17:42:38 LOG7[main]: No certificate or private key specified 2015.12.29 17:42:38 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2015.12.29 17:42:38 LOG6[main]: Initializing service [gmail-smtp] 2015.12.29 17:42:38 LOG7[main]: No certificate or private key specified 2015.12.29 17:42:38 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2015.12.29 17:42:38 LOG6[main]: Initializing service [smtp-tls-wrapper] 2015.12.29 17:42:38 LOG7[main]: No certificate or private key specified 2015.12.29 17:42:38 LOG4[main]: Service [smtp-tls-wrapper] needs authentication to prevent MITM attacks 2015.12.29 17:42:38 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2015.12.29 17:42:38 LOG5[main]: Configuration successful 2015.12.29 17:42:38 LOG7[main]: Listening file descriptor created (FD=372) 2015.12.29 17:42:38 LOG7[main]: Service [gmail-pop3] (FD=372) bound to 127.0.0.1:110 2015.12.29 17:42:38 LOG7[main]: Listening file descriptor created (FD=376) 2015.12.29 17:42:38 LOG7[main]: Service [gmail-imap] (FD=376) bound to 127.0.0.1:143 2015.12.29 17:42:38 LOG7[main]: Listening file descriptor created (FD=380) 2015.12.29 17:42:38 LOG7[main]: Service [gmail-smtp] (FD=380) bound to 127.0.0.1:25 2015.12.29 17:42:38 LOG7[main]: Listening file descriptor created (FD=384) 2015.12.29 17:42:38 LOG7[main]: Service [smtp-tls-wrapper] (FD=384) bound to 0.0.0.0:2525 2015.12.29 17:43:25 LOG7[main]: Found 1 ready file descriptor(s) 2015.12.29 17:43:25 LOG7[main]: FD=332 ifds=r-x ofds=--- 2015.12.29 17:43:25 LOG7[main]: FD=372 ifds=r-x ofds=--- 2015.12.29 17:43:25 LOG7[main]: FD=376 ifds=r-x ofds=--- 2015.12.29 17:43:25 LOG7[main]: FD=380 ifds=r-x ofds=--- 2015.12.29 17:43:25 LOG7[main]: Service [smtp-tls-wrapper] accepted (FD=444) from 127.0.0.1:49510 2015.12.29 17:43:25 LOG7[main]: Creating a new thread 2015.12.29 17:43:25 LOG7[main]: New thread created 2015.12.29 17:43:25 LOG7[0]: Service [smtp-tls-wrapper] started 2015.12.29 17:43:25 LOG5[0]: Service [smtp-tls-wrapper] accepted connection from 127.0.0.1:49510 2015.12.29 17:43:25 LOG6[0]: failover: round-robin, starting at entry #0 2015.12.29 17:43:25 LOG6[0]: s_connect: connecting 54.243.71.143:2465 2015.12.29 17:43:25 LOG7[0]: s_connect: s_poll_wait 54.243.71.143:2465: waiting 10 seconds 2015.12.29 17:43:25 LOG5[0]: s_connect: connected 54.243.71.143:2465 2015.12.29 17:43:25 LOG5[0]: Service [smtp-tls-wrapper] connected remote server from 172.31.49.212:49511 2015.12.29 17:43:25 LOG7[0]: Remote descriptor (FD=468) initialized 2015.12.29 17:43:25 LOG6[0]: SNI: sending servername: email-smtp.us-east-1.amazonaws.com 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): before/connect initialization 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv2/v3 write client hello A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 read server hello A 2015.12.29 17:43:25 LOG6[0]: Certificate verification disabled 2015.12.29 17:43:25 LOG6[0]: Certificate verification disabled 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 read server certificate A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 read server key exchange A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 read server done A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 write client key exchange A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 write change cipher spec A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 write finished A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 flush data 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 read server session ticket A 2015.12.29 17:43:25 LOG7[0]: SSL state (connect): SSLv3 read finished A 2015.12.29 17:43:25 LOG7[0]: 1 client connect(s) requested 2015.12.29 17:43:25 LOG7[0]: 1 client connect(s) succeeded 2015.12.29 17:43:25 LOG7[0]: 0 client renegotiation(s) requested 2015.12.29 17:43:25 LOG7[0]: 0 session reuse(s) 2015.12.29 17:43:25 LOG6[0]: SSL connected: new session negotiated 2015.12.29 17:43:25 LOG7[0]: Peer certificate was cached (3667 bytes) 2015.12.29 17:43:25 LOG6[0]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES128-GCM-SHA256 (128-bit encryption) 2015.12.29 17:43:25 LOG7[0]: Compression: null, expansion: null 2015.12.29 17:43:36 LOG7[0]: SSL alert (read): warning: close notify 2015.12.29 17:43:36 LOG6[0]: SSL closed (SSL_read) 2015.12.29 17:43:36 LOG7[0]: Sent socket write shutdown 2015.12.29 17:43:38 LOG6[cron]: Executing cron jobs 2015.12.29 17:43:38 LOG6[cron]: Cron jobs completed in 0 seconds 2015.12.29 17:43:38 LOG7[cron]: Waiting 86400 seconds 2015.12.29 17:44:36 LOG3[0]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.29 17:44:36 LOG5[0]: Connection closed: 995 byte(s) sent to SSL, 397 byte(s) sent to socket 2015.12.29 17:44:36 LOG7[0]: Remote descriptor (FD=468) closed 2015.12.29 17:44:36 LOG7[0]: Local descriptor (FD=444) closed 2015.12.29 17:44:36 LOG7[0]: Service [smtp-tls-wrapper] finished (0 left) I've searched the web for that TIMEOUTclose message and haven't come up with a solution. I've also attached a packet capture. Any suggestions would be helpful. Thanks! Mike

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users