- stunnel-users - stunnel.org

How to have multiple HTTPS connection with different PEM file
by Andrew Culross 18 Mar '10

18 Mar '10

We are running sTunnel 4.2 and want to have two HTTPS connection that use different PEM certs and are having difficulty doing this - how do you set this up? We have something like ---- Cert = cert1.pem [https] connect = xxx.xxx.xxx.xxx:442 connect = yyy.yyy.yyy.yyy:443 accept = 9876 ------ and we need something like this? -------- [https] connect = xxx.xxx.xxx.xxx:442 cert = cert1.pem accept = 9876 [https] connect = yyy.yyy.yyy.yyy:443 cert = cert2.pem accept = 9877 ----- Can we do that in the config file? If not, how does one specify ? Thanks! Andrew Culross TwoFour Systems 445 Hamilton Ave White Plains, NY 10601 Direct +1 (914) 220-8849 Main +1 (914) 220-8800 Fax +1 (914) 220-8899 <http://www.twofour.com/> www.TwoFour.com <http://www.twofour.com/emaildisclaimer.aspx> http://www.twofour.com/emaildisclaimer.aspx

2 1

Stunnel server with access from Firefox
by Ricky I 16 Mar '10

16 Mar '10

Hi, I am trying to use Stunnel to provide HTTPS access to a web site (my router configurations). That is, stunnel is used to accept HTTPS connection and it forwards the request using HTTP to the web site. The problem seems to be that one connection is opened and it performs an HTTP GET. Afterwards Stunnel does not accept any more connections and I have to restart. I'm not sure what I'm doing wrong. The strange thing I notice is that service router is finished with -1. What does minus one mean? I am using Firefox as the client. What I see is that Firefox is trying to load the page. Using wireshark, I was able to see that all the HTML data from the web page was loaded but Firefox was having trouble performing HTTP GET for the images on the site. I need to restart Stunnel in order to have another connection open. This is confirmed where I made a test by restarting Stunnel and then I tried to just load images from the Web site: e.g. https://192.168.1.88:8880/image1.jpg and https://192.168.1.88:8880/image2.jpg. I get image1.jpg but Firefox can't access image2.jpg, unless I restart then get image2. Here's the logs showing that I am able to make one access to the site. 2010.03.16 00:47:41 LOG5[3266:1024]: stunnel 4.31 on armv5tejl-unknown-linux-gnu with OpenSSL 0.9.8k 25 Mar 2009 2010.03.16 00:47:41 LOG5[3266:1024]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 2010.03.16 00:47:41 LOG7[3266:1024]: Cleaning up the signal pipe 2010.03.16 00:47:41 LOG7[3266:1024]: Signal pipe is empty 2010.03.16 00:47:46 LOG7[3266:1024]: Service router accepted FD=0 from 192.168.1.80:2821 2010.03.16 00:47:46 LOG7[3268:1026]: Service router started 2010.03.16 00:47:46 LOG7[3268:1026]: FD=0 in non-blocking mode 2010.03.16 00:47:46 LOG7[3268:1026]: Option TCP_NODELAY set on local socket 2010.03.16 00:47:46 LOG5[3268:1026]: Service router accepted connection from 192.168.1.80:2821 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): before/accept initialization 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read client hello A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write server hello A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write certificate A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write server done A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 flush data 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read client key exchange A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 read finished A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write change cipher spec A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 write finished A 2010.03.16 00:47:46 LOG7[3268:1026]: SSL state (accept): SSLv3 flush data 2010.03.16 00:47:46 LOG7[3268:1026]: 1 items in the session cache 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client connects (SSL_connect()) 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client connects that finished 2010.03.16 00:47:46 LOG7[3268:1026]: 0 client renegotiations requested 2010.03.16 00:47:46 LOG7[3268:1026]: 1 server connects (SSL_accept()) 2010.03.16 00:47:46 LOG7[3268:1026]: 1 server connects that finished 2010.03.16 00:47:46 LOG7[3268:1026]: 0 server renegotiations requested 2010.03.16 00:47:46 LOG7[3268:1026]: 0 session cache hits 2010.03.16 00:47:46 LOG7[3268:1026]: 0 external session cache hits 2010.03.16 00:47:46 LOG7[3268:1026]: 1 session cache misses 2010.03.16 00:47:46 LOG7[3268:1026]: 0 session cache timeouts 2010.03.16 00:47:46 LOG6[3268:1026]: SSL accepted: new session negotiated 2010.03.16 00:47:46 LOG6[3268:1026]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2010.03.16 00:47:46 LOG7[3268:1026]: FD=9 in non-blocking mode 2010.03.16 00:47:46 LOG6[3268:1026]: connect_blocking: connecting 192.168.1.1:80 2010.03.16 00:47:46 LOG7[3268:1026]: connect_blocking: s_poll_wait 192.168.1.1:80: waiting 10 seconds 2010.03.16 00:47:46 LOG5[3268:1026]: connect_blocking: connected 192.168.1.1:80 2010.03.16 00:47:46 LOG5[3268:1026]: Service router connected remote server from 192.168.1.88:1133 2010.03.16 00:47:46 LOG7[3268:1026]: Remote FD=9 initialized 2010.03.16 00:47:46 LOG7[3268:1026]: Option TCP_NODELAY set on remote socket 2010.03.16 00:47:46 LOG7[3268:1026]: Socket closed on read 2010.03.16 00:47:46 LOG7[3268:1026]: SSL write shutdown 2010.03.16 00:47:46 LOG7[3268:1026]: SSL alert (write): warning: close notify 2010.03.16 00:47:46 LOG6[3268:1026]: SSL_shutdown successfully sent close_notify 2010.03.16 00:47:46 LOG6[3268:1026]: s_poll_wait timeout: connection close 2010.03.16 00:47:46 LOG5[3268:1026]: Connection closed: 4675 bytes sent to SSL, 445 bytes sent to socket 2010.03.16 00:47:46 LOG7[3268:1026]: Service router finished (-1 left) ============ Finally here's my stunnel.conf: cert = /mnt/HD_a2/ffp/etc/stunnel/stunnel.pem sslVersion = SSLv3 pid = /stunnel.pid ; performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; debugging stuff (may useful for troubleshooting) debug = 7 output = /ffp/etc/stunnel/stunnel.log ; service-level configuration [router] accept = 8880 connect = 192.168.1.1:80 TIMEOUTclose = 0 Thank you very much for any help you can provide. Rick _________________________________________________________________ Check your Hotmail from your phone. http://go.microsoft.com/?linkid=9712957

1 0

DSA server certificate
by Carl 15 Mar '10

15 Mar '10

Hi, Does stunnel support server certificate with a DSA private key? When I try to use a self generated one, stunnel responds with: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib SSL_CTX_use_RSAPrivateKey_file: 607907F: error:0607907F:digital envelope routines:EVP_PKEY_get1_RSA:expecting an rsa key Is this bug report relevant? http://www.mail-archive.com/debian-bugs-closed@lists.debian.org/msg43770.ht… Thanks, Carl

1 0

How do you configure Stunnel Ver 4.31 for TLSv1 - More Info
by David M. Douglass 11 Mar '10

11 Mar '10

Reference: Stunnel Ver 4.31 Windows Binaries This is the actual configuration file I am using. There is not too much to it. As shown below, this WORKS for Gmail's SSL port.. Port 465. Notice that the sslVersion statement is remarked "out". +++++++++++++++++++++++++++ output = STUNNEL.log taskbar = NO cert = stunnel.pem client = yes [SSMTP] accept=DADSXPPRO:8025 connect=smtp.gmail.com:465 ;sslVersion = TLSv1 ++++++++++++++++++++++++++++ In theory (as I have read it...), to change this to TLS, I enable the sslVersion line, And change the port (for Gmail) to 587. Port 587 and TLS for Gmail have been tested and verified via Microsoft Outlook testing. But when I do so, I cannot even log onto the Gmail server. I get the error message referenced in the first message: 2010.02.25 10:35:44 LOG3[2696:2740]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number It occurs to me that I am only using the "stunnel.pem" file, as supplied by the installer program. Do I have a certificate issue? David M. Douglass david(a)az-douglass.net Home (480) 839-2629 Cell (602) 908-9092

4 5

Problem with openssl engine
by Nick Sayer 27 Feb '10

27 Feb '10

I'm trying to use a smart card to hold on to the private key for my server. Since access to the smart card is restricted to one process at a time (not sure why it can't be shared, but that's a whole separate discussion), I'd like to use stunnel as the machine-wide SSL proxy. The problem is that with the pkcs11 engine configuration set up, it fails. 2010.02.27 00:15:03 LOG5[91580:0]: imaps accepted connection from 71.141.64.2:32934 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): before/accept initialization 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 read client hello A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write server hello A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write certificate A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 write server done A 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 flush data 2010.02.27 00:15:03 LOG7[91580:0]: SSL state (accept): SSLv3 read client key exchange A 2010.02.27 00:15:03 LOG7[91580:0]: SSL alert (write): fatal: bad record mac 2010.02.27 00:15:03 LOG3[91580:0]: SSL_accept: 1408F119: error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac 2010.02.27 00:15:03 LOG5[91580:0]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2010.02.27 00:15:03 LOG7[91576:0]: Cleaning up the signal pipe 2010.02.27 00:15:03 LOG7[91576:0]: Process 91580 finished with code 0 (0 left) ^C2010.02.27 00:15:42 LOG3[91576:0]: Received signal 2; terminating This happens *whether or not* I use the private key on the smart card itself. If I load the private key from a disk file, it still happens - even if there is no engineNum statement in the service configuration block. The only way to make it not happen is to comment out the engineCtrl lines. engine=dynamic engineCtrl=SO_PATH:/usr/local/lib/engines/engine_pkcs11.so engineCtrl=ID:pkcs11 engineCtrl=LIST_ADD:1 engineCtrl=LOAD engineCtrl=MODULE_PATH:/usr/local/lib/pkcs11/opensc-pkcs11.so engineCtrl=INIT engineCtrl=PIN:12345678 [imaps] accept = 4993 connect = 143 engineNum = 1 key = id_10 ;cert = id_10 cert = /www.crt It's also worth noting that stunnel seems unable to pull the cert out of the card - that cert=id_10 line should work (works with openssl s_server). This stunnel was compiled last night from the FreeBSD ports tree with WITH_STUNNEL_SSL_ENGINE turned on. stunnel 4.29 on i386-portbld-freebsd8.0 with OpenSSL 0.9.8k 25 Mar 2009 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /var/tmp/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Note that the same card in the same system can successfully provide ssl server sockets with Java using the Sun PKCS11 JCE provider configured to talk to the opensc PKCS11 module. So there's nothing wrong with the card.

1 0

stunnel-4.15-2.el5.1 zombie when xinetd
by tatiana philippova 25 Feb '10

25 Feb '10

Hi All, I have a problem with stunnel in xinetd mode. It cannot connect to specified localhost:port - always getting child stunnel defunct as a result.. 4789 ? Ss 0:00 \_ stunnel /etc/stunnel/stunnel.conf 4790 ? Z 0:00 \_ [stunnel] <defunct> I'm trying use rsync via stunnel (!ssh for rsync does not suits me in this particular case, but I need encrypt backup traffic anyway.. so have chosen stunnel) client config: cert = /etc/stunnel/stunnel_client_cert.pem client = yes pid = /var/run/stunnel.pid debug = 7 output = /var/log/stunnel.log sslVersion = SSLv2 [ssync] accept = 873 connect = myhost.somewhere.net:273 server config: cert = /etc/stunnel/certs/host.pem key = /etc/stunnel/certs/private/cakey.pem client = no pid = /var/run/stunnel.pid debug = 7 #foreground = yes output = /var/log/stunel.log connect = 873 xinetd config: # default: off # description: SSL wrapper for rsyncd service ssync { disable = no socket_type = stream wait = no user = root server = /usr/sbin/stunnel server_args = /etc/stunnel/stunnel.conf log_on_success += HOST DURATION log_on_failure += HOST only_from = 192.168.5.15 127.0.0.1 } on server side /etc/services: ssync 273/tcp # rsync over stunnel # ps axf | grep rsyn 15637 ? S 0:00 /usr/bin/rsync -4 --daemon --no-detach # netstat -an --program | grep 273 tcp 0 0 0.0.0.0:273 0.0.0.0:* LISTEN 4751/xinetd # netstat -an --program | grep 873 tcp 0 0 127.0.0.1:873 0.0.0.0:* LISTEN 15637/rsync In case of server stunnel running as standalone - everything works perfectly well, but I need it working as xinetd service rather than standalone Could somebody kindly advise what I'm doing wrong? soft on server side: stunnel-4.15-2.el5.1, openssl-0.9.8e-7.el5 OS CentOS release 5.3 (Final), kernel 2.6.18-128.1.6.el5 on client side: stunnel-4.30-1.i386.rpm (compiled as rpmbuild -ta stunnel-4.30.tar.gz) openssl-0.9.8g-9.14.fc9.i686 OS Fedora release 9 (Sulphur) kernel 2.6.28 Many thanks in advance Taphy

1 0

How do you configure Stunnel Ver 4.31 for TLSv1
by David M. Douglass 25 Feb '10

25 Feb '10

I am using the Windows Binary of Version 4.31, and an external email utility that sends SMTP outgoing email. I can configure for specific ports (no problem). and I can send SSMTP SSLv3 with success. That is GOOD ! I am trying to configure Stunnel for sending TLSv1 without success. I understand (via the Version command and screen) that Stunnel defaults to SSLv3. How do I change that to TLSv1 ?? I found the parameter : sslVersion = version select version of SSL protocol Allowed options: all, SSLv2, SSLv3, TLSv1 This appears to be a "SERVICE LEVEL" option, and I have tried to use the line: sslVersion = TLSv1 in the [SSMTP] group of options (along with accept = and connect = ), but get an error message in the log file, which is shown next: 2010.02.25 10:35:44 LOG3[2696:2740]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number I have also tried to put the sslVersion = line in the general configuration area, but generate the same error message. The outbound email does, in fact, fail. Can anyone suggest what I am doing wrong ?? Or offer a solution for configuring Stunnel (V4.31) for TLSv1 ?? David M. Douglass david(a)az-douglass.net Home (480) 839-2629 Cell (602) 908-9092

1 0

How to use stunnel
by Gabriel kamega 24 Feb '10

24 Feb '10

Hello sir, Thank you for my subscription. This is the issue: I want to sent automaticly email via smtp.gmail.com server, And I think I need stunnel program. My questions are : *How to use stunnel ?* ; *How to configure the stunnel.conf file ?* I have dowloaded stunnel.exe version 431, but I can't download the * stunnel.pem* file. on the net I see that I have to install with this command : stunnel -install is that all ? on WXP Professionnel SP2 Regards merci

1 0

Access control/TCP wrappers
by Craig Watkinson 23 Feb '10

23 Feb '10

Hi, We're using stunnel to provide a secure interface to an old server that doesn't support HTTPS natively. I'd like to implement some access control so that connections are only supported from specific IP addresses. I am using v4.27 of stunnel that I downloaded from HPs website, and am running it from inittab to ensure it is always running. Unfortunately I don't think it's compiled with libwrap. Should I see libwrap listed when I run ldd against the binary (see below for output)? I think it's possible to run stunnel from inetd. Could I wrapper it here? Is the following entry correct? stunnel stream tcp nowait root /usr/lbin/tcpd /opt/iexpress/stunnel/bin/stunnel stunnel I think this would work, but I'm concerned that if stunnel was to crash or be killed that there would be nothing restarting it if we ran it from inetd. Any advice much appreciated Craig ------------------------------------- # ./stunnel -version stunnel 4.27 on ia64-hp-hpux11.23 with OpenSSL 0.9.7m 23 Feb 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Global options debug = 5 pid = /opt/iexpress/stunnel/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL+RC4:@STRENGTH key = /opt/iexpress/stunnel/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none # ldd ./stunnel libdl.so.1 => /usr/lib/hpux32/libdl.so.1 libnsl.so.1 => /usr/lib/hpux32/libnsl.so.1 libpthread.so.1 => /usr/lib/hpux32/libpthread.so.1 libunwind.so.1 => /usr/lib/hpux32/libunwind.so.1 libc.so.1 => /usr/lib/hpux32/libc.so.1 libxti.so.1 => /usr/lib/hpux32/libxti.so.1 libuca.so.1 => /usr/lib/hpux32/libuca.so.1 libdl.so.1 => /usr/lib/hpux32/libdl.so.1 _________________________________________________________________ Do you have a story that started on Hotmail? Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/

2 2

4.26 and commercial certificate - Now working.
by Editor (Kevin) 20 Feb '10

20 Feb '10

Hi: Thanks. Everything is working now. > Message: 1 > Date: Wed, 17 Feb 2010 07:11:16 -0800 (PST) > From: Leandro Avila <leandro.avila(a)ymail.com> > Subject: Re: [stunnel-users] Small challenge with version 4.26 and a > commercial certificate > To: stunnel-users(a)mirt.net > Message-ID: <544640.49520.qm(a)web111011.mail.gq1.yahoo.com> > Content-Type: text/plain; charset=us-ascii > > Hi Kevin, > > I think there is ambiguous information about this. > The man page states that the private key should be unencrypted > However, the changelog states that the support for pass phrases was fixed in v4.20 > > I'll do some testing see what I can find. Or maybe someone can shed some light on the issue. > > Best regards > > ----------------- > Leandro Avila

1 0