- stunnel-users - stunnel.org

windows stunnel
by Noel Sanchez 09 Dec '05

09 Dec '05

Hello List. What I'd like to do is use stunnel on a Windows server behind the firewall then forward the data that comes in to the Windows server to another machine (another public ip behind the firewall) that's running an app that needs the original data. For example, I have a device out in the field that is using ssl to send data on port 4000 to my server in the office that has stunnel installed and listens on port 4000. Once the data is sent to the Windows server using stunnel, I'd like the Windows server to send the data to another computer that needs it but that doesn't have stunnel on it. The encryption will happen from the field device to the Windows server in the office, then that Windows server will have to forward the data to another computer that needs the data. I am at a lost on how to do this if at all possible. Any help would be great! Device using ssl out in the field sending data on port 4000---------firewall forwarding traffic from port 4000 to Windows server running stunnel behind firewall-----------Windows server receives stunnel data then forwards to another computer-------system that needs data---- Regards

1 0

Re: Windows config with both SSL listen and non-SSL listen
by Han Jun Li 08 Dec '05

08 Dec '05

Paul, This is a temporary solution but it works. What you need to do is run two instances of Stunnel--one instance configured in client mode and the other in server mode. If you want to run both as services, you can install the standard one with the "-install" switch. For the second instance, you need to use some other binary to install it with a different name and change the imagepath to point to the executable. /han >_____ > >From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] >On Behalf Of Paul Hethmon >Sent: Wednesday, December 07, 2005 2:50 PM >To: stunnel-users(a)mirt.net >Subject: [stunnel-users] Windows config with both SSL listen and >non-SSLlisten > > >I'm trying to set up using the Windows service the ability to listen in SSL >mode on one port (5102) and forward to non-SSL port (5010) and then also >listen on one port (5101) in non-SSL mode and forward to a remote port >(5102) in SSL mode. What I have currently in the config is: > >[inbound] >accept = 5102 >connect = 5010 > >[outbound] >accept = 5101 >connect = x.x.x.x:5102 > >The first STunnel example on the website talks about doing this, sort of, >but I don't see any options to specify on a service configuration level >whether the listen port is in SSL or non-SSL mode. The use of a service name >like [pop3] vs [pop3s] seems to imply a difference, but I've got a custom >application I'm trying to tunnel two way, not a standard IETF service. > >A perusal of the last year's mailing list archives didn't yield anything. I >guess the next step is to look at the source and see if it's supported >unless someone here can tell me one way or the other. If it's not supported, >I guess I'll add it in. > >thanks, > >Paul > > >Paul Hethmon >Senior Engineer >ClareityT Security >SAFEMLST Security Education, Consulting and Solutions >http://www.SAFEMLS.com <http://www.safemls.com/> >paul.hethmon(a)callclareity.com >work: 865.671.6630 >cell: 865.250.3517 > >

1 0

RE: [stunnel-users] Windows config with both SSL listen andnon-SSLlisten
by Paul Hethmon 07 Dec '05

07 Dec '05

Michal, Ok, the next obvious questions then: 1. When is 4.15 expected? 2. If not in the next 7 days, what can I do to help? I've done C/C++ and sockets for the last 10 years. I've looked at the code briefly so far, but have not set up a build environment yet. I need it in the next week so if there is any coding I can do which would help you, let me know your thoughts and where to put stuff. Also, just a public thanks for putting the package together. I started coding my own a couple of days ago and then thought there must have been someone else who just needed an SSL tunnel (and not a full blown SSH setup). Thanks, Paul -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: Wednesday, December 07, 2005 9:03 AM To: stunnel-users(a)mirt.net Subject: RE: [stunnel-users] Windows config with both SSL listen andnon-SSLlisten Paul, This feature is going to be supported in the next release (4.15). Your config will look like this: [inbound] client = no accept = 5102 connect = 5010 [outbound] client = yes accept = 5101 connect = x.x.x.x:5102 Best regards, Mike ________________________________ From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Paul Hethmon Sent: Wednesday, December 07, 2005 2:50 PM To: stunnel-users(a)mirt.net Subject: [stunnel-users] Windows config with both SSL listen and non-SSLlisten I'm trying to set up using the Windows service the ability to listen in SSL mode on one port (5102) and forward to non-SSL port (5010) and then also listen on one port (5101) in non-SSL mode and forward to a remote port (5102) in SSL mode. What I have currently in the config is: [inbound] accept = 5102 connect = 5010 [outbound] accept = 5101 connect = x.x.x.x:5102 The first STunnel example on the website talks about doing this, sort of, but I don't see any options to specify on a service configuration level whether the listen port is in SSL or non-SSL mode. The use of a service name like [pop3] vs [pop3s] seems to imply a difference, but I've got a custom application I'm trying to tunnel two way, not a standard IETF service. A perusal of the last year's mailing list archives didn't yield anything. I guess the next step is to look at the source and see if it's supported unless someone here can tell me one way or the other. If it's not supported, I guess I'll add it in. thanks, Paul Paul Hethmon Senior Engineer ClareityT Security SAFEMLST Security Education, Consulting and Solutions http://www.SAFEMLS.com <http://www.safemls.com/> paul.hethmon(a)callclareity.com work: 865.671.6630 cell: 865.250.3517 _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

Windows config with both SSL listen and non-SSL listen
by Paul Hethmon 07 Dec '05

07 Dec '05

I'm trying to set up using the Windows service the ability to listen in SSL mode on one port (5102) and forward to non-SSL port (5010) and then also listen on one port (5101) in non-SSL mode and forward to a remote port (5102) in SSL mode. What I have currently in the config is: [inbound] accept = 5102 connect = 5010 [outbound] accept = 5101 connect = x.x.x.x:5102 The first STunnel example on the website talks about doing this, sort of, but I don't see any options to specify on a service configuration level whether the listen port is in SSL or non-SSL mode. The use of a service name like [pop3] vs [pop3s] seems to imply a difference, but I've got a custom application I'm trying to tunnel two way, not a standard IETF service. A perusal of the last year's mailing list archives didn't yield anything. I guess the next step is to look at the source and see if it's supported unless someone here can tell me one way or the other. If it's not supported, I guess I'll add it in. thanks, Paul Paul Hethmon Senior Engineer Clareity(tm) Security SAFEMLS(tm) Security Education, Consulting and Solutions http://www.SAFEMLS.com <http://www.safemls.com/> paul.hethmon(a)callclareity.com work: 865.671.6630 cell: 865.250.3517

2 1

stunnel install failure
by James.Bartkowicz＠bedbath.com 05 Dec '05

05 Dec '05

Pretty new to stunnel and not very familiar with compiling programs at all: 1. Description: Installation of stunnel 4.14 failing on a Solaris 9 box. #>make Making all in src /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/usr/local/ssl/include -o libstunnel.la -rpath /usr/local/lib -avoid-version env.lo -lz -ldl -lsocket -lnsl -L/usr/local/ssl/lib -lssl -lcrypto -lwrap gcc -shared -Wl,-h -Wl,libstunnel.so -o .libs/libstunnel.so .libs/env.o -lz -ldl -lsocket -lnsl -L/usr/local/ssl/lib -lssl -lcrypto -lwrap -lc ld: fatal: library -lwrap: not found ld: fatal: File processing errors. No output written to .libs/libstunnel.so collect2: ld returned 1 exit status *** Error code 1 make: Fatal error: Command failed for target `libstunnel.la' Current working directory /local1/home/stunnel/stunnel-4.14/src *** Error code 1 make: Fatal error: Command failed for target `all-recursive' ******************************************* James Bartkowicz Bed Bath & Beyond Server Administration Team - UNIX 908-688-0888 ext.4441 ******************************************* ------------------------------------------------------ CONFIDENTIALITY NOTICE: This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please permanently delete the original and any copy of any e-mail and any printout thereof. Thank you for your compliance.

2 1

Server connecting back to client?
by Joshua Kugler 02 Dec '05

02 Dec '05

I've looked through the man pages, FAQ's, examples, and found one post (without a reply: http://stunnel.mirt.net/pipermail/stunnel-users/2005-May/000487.html) about this, but still don't have my question answered. I have a machine outside the firewall (let's call it outThere) that needs to connect back to a machine inside the firewall (let's call in inHere) for backup procedures. Now, because of the firewall, outThere cannot connect to inHere, but inHere can connect to anything on outThere that it wants. Can I initiate an stunnel connection from inHere to outThere, and then have stunnel on outThere listen on a localhost port, which, when connected to, would actually forward the connection (over SSL) back to a configured port on inHere? Is this at all doable? j----- k----- -- Joshua Kugler CDE System Administrator http://distance.uaf.edu/

2 1

Stunnel sending ICMP packet at startup
by Paul Jones 30 Nov '05

30 Nov '05

Hi there, I have set up Stunnel on both the server and the client. There is a firewall on the server side that only allows TCP connections through. When Stunnel is started up on the client side, the firewall is actually receiving an ICMP packet, not a TCP. Is this how Stunnel should be working? I assume it's doing a ping or something at startup. Thanks in advance. Paul _________________________________________________________________ SEEK: Over 80,000 jobs across all industries at Australia's #1 job site. http://ninemsn.seek.com.au?hotmail

2 1

4th Dimension and Stunnel
by Mark 28 Nov '05

28 Nov '05

Does anyone have a sample config file to allow 4th Dimension client and server to use stunnel?

1 0

How to protect private key in Windows XP Home
by Andrus 28 Nov '05

28 Nov '05

My stunnel client must start without user intervention. So I installed stunnel in client mode in a Windows XP Home computer as XP service. In XP Proffesional I can specify that only Administrators group has access to stunnel directory. XP Home does not have security tab in folder properties. Any person working in XP Home compter can copy stunnel private key How to protect private key from copying ? Andrus. My stunnel.conf file: Cafile=server.crt cert=privkey.pem client = yes service=RDPClient verify = 2 [terminal server] accept = 83389 connect = 1.2.3.4:83389

1 0

socklen_t undeclared
by tc 24 Nov '05

24 Nov '05

Hi, I'm getting socklet_t undeclared in client.c making stunnel4.14 in an embedded linux 2.038 system. What can I do? Thanks TC __________________________________ Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather http://asia.yahoo.com/meetic

2 1