- stunnel-users - stunnel.org

SMTP Authentication failed
by Ian Coetzee 15 May '18

15 May '18

Hi List, I have just joined the stunnel community. I am in the process of migrating our mailserver's public facing ports to stunnel for PCI compliance reasons. So far i have managed to get working: - imap (143/tcp) with starttls - imaps (993/tcp) - pop3 (110/tcp) with starttls - pop3s (995/tcp) My trouble is with smtp(25/tcp,587/tcp) with starttls. I have now tried a couple different mail clients and everyone of them tells me that the server does not support the authentication protocols. I have installed stunnel 5.44. Tee relevant parts in my config: [mail2-imap] protocol = imap accept = 143 connect = <mail-fqdn>:143 [mail2-imaps] accept = 993 connect = <mail-fqdn>:143 [mail2-pop3] protocol = pop3 accept = 110 connect = <mail-fqdn>:110 [mail2-pop3s] accept = 995 connect = <mail-fqdn>:110 [mail2-smtp] protocol = smtp accept = 25 connect = <mail-fqdn>:25 [mail2-smtps] accept = 465 connect = <mail-fqdn>:465 [mail2-smtps-submission] debug = 7 protocol = smtp accept = 587 connect = <mail-fqdn>:587 In the logfile I have the following entries upon connecting 2018.04.30 09:20:50 LOG7[5]: Service [mail2-smtps-submission] started 2018.04.30 09:20:50 LOG7[5]: Option TCP_NODELAY set on local socket 2018.04.30 09:20:50 LOG5[5]: Service [mail2-smtps-submission] accepted connection from 41.13.8.49:56890 2018.04.30 09:20:50 LOG6[5]: s_connect: connecting 10.10.11.2:587 2018.04.30 09:20:50 LOG7[5]: s_connect: s_poll_wait 10.10.11.2:587: waiting 10 seconds 2018.04.30 09:20:50 LOG5[5]: s_connect: connected 10.10.11.2:587 2018.04.30 09:20:50 LOG5[5]: Service [mail2-smtps-submission] connected remote server from 10.10.11.11:42466 2018.04.30 09:20:50 LOG7[5]: Option TCP_NODELAY set on remote socket 2018.04.30 09:20:50 LOG7[5]: Remote descriptor (FD=23) initialized 2018.04.30 09:20:50 LOG7[5]: RFC 2487 detected 2018.04.30 09:20:50 LOG7[5]: <- 220 <mail-fqdn> ESMTP Postfix 2018.04.30 09:20:50 LOG7[5]: -> 220 <mail-fqdn> stunnel for ESMTP Postfix 2018.04.30 09:20:51 LOG7[5]: <- EHLO [100.125.153.220] 2018.04.30 09:20:51 LOG7[5]: -> 250-<mail-fqdn> 2018.04.30 09:20:51 LOG7[5]: -> 250 STARTTLS 2018.04.30 09:20:51 LOG7[5]: <- STARTTLS 2018.04.30 09:20:51 LOG7[5]: -> 220 Go ahead 2018.04.30 09:20:51 LOG6[5]: Peer certificate not required 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): before/accept initialization 2018.04.30 09:20:51 LOG7[5]: SNI: no virtual services defined 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 read client hello A 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 write server hello A 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 write certificate A 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 write key exchange A 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 write server done A 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 flush data 2018.04.30 09:20:51 LOG7[5]: TLS state (accept): SSLv3 read client certificate A 2018.04.30 09:20:52 LOG7[5]: TLS state (accept): SSLv3 read client key exchange A 2018.04.30 09:20:52 LOG7[5]: TLS state (accept): SSLv3 read certificate verify A 2018.04.30 09:20:52 LOG7[5]: TLS state (accept): SSLv3 read finished A 2018.04.30 09:20:52 LOG7[5]: TLS state (accept): SSLv3 write change cipher spec A 2018.04.30 09:20:52 LOG7[5]: TLS state (accept): SSLv3 write finished A 2018.04.30 09:20:52 LOG7[5]: TLS state (accept): SSLv3 flush data 2018.04.30 09:20:52 LOG7[5]: New session callback 2018.04.30 09:20:52 LOG7[5]: 2 server accept(s) requested 2018.04.30 09:20:52 LOG7[5]: 2 server accept(s) succeeded 2018.04.30 09:20:52 LOG7[5]: 0 server renegotiation(s) requested 2018.04.30 09:20:52 LOG7[5]: 0 session reuse(s) 2018.04.30 09:20:52 LOG7[5]: 2 internal session cache item(s) 2018.04.30 09:20:52 LOG7[5]: 0 internal session cache fill-up(s) 2018.04.30 09:20:52 LOG7[5]: 0 internal session cache miss(es) 2018.04.30 09:20:52 LOG7[5]: 0 external session cache hit(s) 2018.04.30 09:20:52 LOG7[5]: 0 expired session(s) retrieved 2018.04.30 09:20:52 LOG6[5]: TLS accepted: new session negotiated 2018.04.30 09:20:52 LOG6[5]: No peer certificate received 2018.04.30 09:20:52 LOG6[5]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES128-GCM-SHA256 (128-bit encryption) 2018.04.30 09:20:52 LOG7[5]: Compression: null, expansion: null 2018.04.30 09:20:52 LOG6[5]: Read socket closed (read hangup) 2018.04.30 09:20:52 LOG7[5]: Sending close_notify alert 2018.04.30 09:20:52 LOG7[5]: TLS alert (write): warning: close notify 2018.04.30 09:20:52 LOG6[5]: SSL_shutdown successfully sent close_notify alert 2018.04.30 09:20:52 LOG6[5]: TLS fd: Connection reset by peer (104) 2018.04.30 09:20:52 LOG6[5]: TLS socket closed (SSL_read) 2018.04.30 09:20:52 LOG7[5]: Sent socket write shutdown 2018.04.30 09:20:52 LOG5[5]: Connection closed: 156 byte(s) sent to TLS, 30 byte(s) sent to socket 2018.04.30 09:20:52 LOG7[5]: Remote descriptor (FD=23) closed 2018.04.30 09:20:52 LOG7[5]: Local descriptor (FD=22) closed 2018.04.30 09:20:52 LOG7[5]: Service [mail2-smtps-submission] finished (4 left) This is the error I am getting from K9-Mail The google mail app just tells me: Alpine (linux commandline smtp client) Any advise from the gurus? Kind regards Ian

1 1

Error with negotiation OK
by Alix Janeth Jerez 15 May '18

15 May '18

Hi I am using lastest stunnel version. When i try to send an email, i get: "error permanente de SMTP: 503 Bad sequence of commands". This is the trace generated when I try to send an email. 2018.05.14 12:59:08 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.14 12:59:08 LOG5[main]: UTF-8 byte order mark not detected 2018.05.14 12:59:08 LOG5[main]: FIPS mode disabled 2018.05.14 12:59:08 LOG5[main]: Configuration successful 2018.05.14 12:59:08 LOG7[main]: Binding service [pseudo-ssmtp] 2018.05.14 12:59:08 LOG7[main]: Listening file descriptor created (FD=568) 2018.05.14 12:59:08 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2018.05.14 12:59:08 LOG7[main]: Service [pseudo-ssmtp] (FD=568) bound to 172.31.41.84:116 2018.05.14 12:59:08 LOG7[main]: Signal pipe is empty 2018.05.14 12:59:22 LOG7[main]: Found 1 ready file descriptor(s) 2018.05.14 12:59:22 LOG7[main]: FD=324 ifds=r-x ofds=r-- 2018.05.14 12:59:22 LOG7[main]: Dispatching signals from the signal pipe 2018.05.14 12:59:22 LOG7[main]: Processing SIGNAL_RELOAD_CONFIG 2018.05.14 12:59:22 LOG7[main]: Running on Windows 6.1 2018.05.14 12:59:22 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.14 12:59:22 LOG5[main]: UTF-8 byte order mark not detected 2018.05.14 12:59:22 LOG5[main]: FIPS mode disabled 2018.05.14 12:59:22 LOG7[main]: Compression disabled 2018.05.14 12:59:22 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2018.05.14 12:59:22 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd 2018.05.14 12:59:22 LOG7[main]: PRNG seeded successfully 2018.05.14 12:59:22 LOG6[main]: Initializing service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2018.05.14 12:59:22 LOG7[main]: TLS options: 0x03000004 (+0x03000000, 0x00000000) 2018.05.14 12:59:22 LOG6[main]: Loading certificate from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Certificate loaded from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Loading private key from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Private key loaded from file: stunnel.pem 2018.05.14 12:59:22 LOG7[main]: Private key check succeeded 2018.05.14 12:59:22 LOG5[main]: Configuration successful 2018.05.14 12:59:22 LOG7[main]: Unbinding service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] closed (FD=568) 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] closed 2018.05.14 12:59:22 LOG7[main]: Binding service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Listening file descriptor created (FD=568) 2018.05.14 12:59:22 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] (FD=568) bound to 172.31.41.84:116 2018.05.14 12:59:22 LOG7[main]: Signal pipe is empty 2018.05.14 12:59:34 LOG7[main]: Found 1 ready file descriptor(s) 2018.05.14 12:59:34 LOG7[main]: FD=324 ifds=r-x ofds=--- 2018.05.14 12:59:34 LOG7[main]: Service [pseudo-ssmtp] accepted (FD=584) from 172.31.41.84:53557 2018.05.14 12:59:34 LOG7[main]: Creating a new thread 2018.05.14 12:59:34 LOG7[main]: New thread created 2018.05.14 12:59:34 LOG7[37]: Service [pseudo-ssmtp] started 2018.05.14 12:59:34 LOG7[37]: Option TCP_NODELAY set on local socket 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] accepted connection from 172.31.41.84:53557 2018.05.14 12:59:34 LOG6[37]: failover: round-robin, starting at entry #1 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 212.227.15.158:465 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 212.227.15.158:465: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 212.227.15.158:465 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] connected remote server from 172.31.41.84:53558 2018.05.14 12:59:34 LOG7[37]: Option TCP_NODELAY set on remote socket 2018.05.14 12:59:34 LOG7[37]: Remote descriptor (FD=552) initialized 2018.05.14 12:59:34 LOG6[37]: SNI: sending servername: smtp.1and1.es 2018.05.14 12:59:34 LOG6[37]: Peer certificate required 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): before/connect initialization 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): SSLv2/v3 write client hello A 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): SSLv3 read server hello A 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=2: C=US, O="thawte, Inc.", OU=Certification Services Division, OU="(c) 2006 thawte, Inc. - For authorized use only", CN=thawte Primary Root CA 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG7[37]: OCSP: Ignoring root certificate 2018.05.14 12:59:34 LOG6[37]: Certificate accepted at depth=2: C=US, O="thawte, Inc.", OU=Certification Services Division, OU="(c) 2006 thawte, Inc. - For authorized use only", CN=thawte Primary Root CA 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=1: C=US, O="thawte, Inc.", CN=thawte SSL CA - G2 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG5[37]: OCSP: Connecting the AIA responder "http://t2.symcb.com" 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 23.5.251.27:80: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: OCSP: Connected t2.symcb.com:80 2018.05.14 12:59:34 LOG7[37]: OCSP: Response received 2018.05.14 12:59:34 LOG6[37]: OCSP: Status: good 2018.05.14 12:59:34 LOG6[37]: OCSP: This update: May 13 18:15:02 2018 GMT 2018.05.14 12:59:34 LOG6[37]: OCSP: Next update: May 20 18:15:02 2018 GMT 2018.05.14 12:59:34 LOG5[37]: OCSP: Certificate accepted 2018.05.14 12:59:34 LOG6[37]: Certificate accepted at depth=1: C=US, O="thawte, Inc.", CN=thawte SSL CA - G2 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=0: C=DE, ST=Rheinland-Pfalz, L=Montabaur, O=1&1 Internet SE, CN=smtp.1and1.es 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG6[37]: CERT: Host name "smtp.1and1.es" matched with "smtp.1and1.es" 2018.05.14 12:59:34 LOG5[37]: OCSP: Connecting the AIA responder "http://tj.symcd.com" 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 23.5.251.27:80: waiting 10 seconds 2018.05.14 12:59:35 LOG5[37]: s_connect: connected 23.5.251.27:80 2018.05.14 12:59:35 LOG7[37]: OCSP: Connected tj.symcd.com:80 2018.05.14 12:59:35 LOG7[37]: OCSP: Response received 2018.05.14 12:59:35 LOG6[37]: OCSP: Status: good 2018.05.14 12:59:35 LOG6[37]: OCSP: This update: May 14 01:38:59 2018 GMT 2018.05.14 12:59:35 LOG6[37]: OCSP: Next update: May 21 01:38:59 2018 GMT 2018.05.14 12:59:35 LOG5[37]: OCSP: Certificate accepted 2018.05.14 12:59:35 LOG5[37]: Certificate accepted at depth=0: C=DE, ST=Rheinland-Pfalz, L=Montabaur, O=1&1 Internet SE, CN=smtp.1and1.es 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server certificate A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server key exchange A 2018.05.14 12:59:35 LOG6[37]: Client certificate not requested 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server done A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write client key exchange A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write change cipher spec A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write finished A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 flush data 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read finished A 2018.05.14 12:59:35 LOG7[37]: 1 client connect(s) requested 2018.05.14 12:59:35 LOG7[37]: 1 client connect(s) succeeded 2018.05.14 12:59:35 LOG7[37]: 0 client renegotiation(s) requested 2018.05.14 12:59:35 LOG7[37]: 0 session reuse(s) 2018.05.14 12:59:35 LOG6[37]: TLS connected: new session negotiated 2018.05.14 12:59:35 LOG7[37]: Peer certificate was cached (5543 bytes) 2018.05.14 12:59:35 LOG6[37]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.14 12:59:35 LOG7[37]: Compression: null, expansion: null 2018.05.14 12:59:53 LOG3[36]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2018.05.14 12:59:53 LOG5[36]: Connection closed: 15 byte(s) sent to TLS, 166 byte(s) sent to socket I can't find the error. Thanks in advance for your help. Best regards, Alix

2 5

stunnel-5.44 fails cross compile due to wrong include path in Gentoo....fix available
by Joe Harvell 14 May '18

14 May '18

The src/Makefile.am hardcodes -I/usr/kerberos/include. When cross compiling it should be including -I$(SYSROOT)//usr/kerberos/include. I patched configure.ac and Makefile.am, taking advantage of the existing --with-sysroot configure option. The Gentoo bug report: https://bugs.gentoo.org/654374 The patch to configure.ac and Makefile.am: https://654374.bugs.gentoo.org/attachment.cgi?id=528968 I was unable to find a bug reporting system for stunnel. So I guess this is it. Please source this fix. --- Joe Harvell

1 1

help with tls config in stunnel
by Daniel Trickett 10 May '18

10 May '18

Hi, We are running stunnel 5.44 on Solaris. Our b2b legacy system is using TLS 1.0. We have a supplier who recently switched to TLS 1.2 and we can no longer connect to the site from our b2b. How can I configure stunnel to connect to the supplier site using TLS 1.2? TIA. Dan T This message and any attachment are confidential and may be privileged or otherwise protected from disclosure. If you are not the intended recipient, you must not copy this message or attachment or disclose the contents to any other person. If you have received this transmission in error, please notify the sender immediately and delete the message and any attachment from your system. Merck KGaA, Darmstadt, Germany and any of its subsidiaries do not accept liability for any omissions or errors in this message which may arise as a result of E-Mail-transmission or for damages resulting from any unauthorized changes of the content of this message and any attachment thereto. Merck KGaA, Darmstadt, Germany and any of its subsidiaries do not guarantee that this message is free of viruses and does not accept liability for any damages caused by any virus transmitted therewith. Click http://www.emdgroup.com/emd/imprint/mail_disclaimer.html to access the German, French, Spanish and Portuguese versions of this disclaimer.

1 0

How to tell if commuications are encrypted?
by Alex Birchall 10 May '18

10 May '18

Hello, I have Stunnel installed on Windows Server 2008 R2, running as a service. I have it installed as a client on a Windows POS 2009 device. This setup is working, in that the client is operating correctly and using Stunnel. But how can I tell if communications between the Stunnel client and the Stunnel server are being encrypted, rather than Stunnel just doing port forwarding? I did read the client needs to have access to the server's certificate, but at the moment it does not. Alex

2 1

Stunnel to Outlook
by DPS Support 09 May '18

09 May '18

I am trying to get a device on my network to send pop email notifications to my outlook account but can't seem to get it to work. I have enabled the outlook account to accept pop and enabled the client to send them. I'm not sure if I'm missing something or what, any help would be greatly appreciated. Here is my config: debug = info output = stunnel.log [outlook-pop3] client = yes accept = 110 connect = pop-mail.outlook.com:995 [outlook-imap] client = yes accept = 143 connect = imap-mail.outlook.com:993 [outlook-smtp] protocol = smtp client = yes accept = 25 connect = smtp-mail.outlook.com:587 Here is the log as well: 2018.05.08 15:15:03 LOG5[main]: stunnel 5.44 on x86-pc-msvc-1500 platform 2018.05.08 15:15:03 LOG5[main]: Compiled/running with OpenSSL 1.0.2m-fips 2 Nov 2017 2018.05.08 15:15:03 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2018.05.08 15:15:03 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.08 15:15:03 LOG5[main]: UTF-8 byte order mark detected 2018.05.08 15:15:03 LOG5[main]: FIPS mode disabled 2018.05.08 15:15:03 LOG6[main]: Initializing service [outlook-pop3] 2018.05.08 15:15:03 LOG4[main]: Service [outlook-pop3] needs authentication to prevent MITM attacks 2018.05.08 15:15:03 LOG6[main]: Initializing service [outlook-imap] 2018.05.08 15:15:03 LOG4[main]: Service [outlook-imap] needs authentication to prevent MITM attacks 2018.05.08 15:15:03 LOG6[main]: Initializing service [outlook-smtp] 2018.05.08 15:15:03 LOG4[main]: Service [outlook-smtp] needs authentication to prevent MITM attacks 2018.05.08 15:15:03 LOG5[main]: Configuration successful 2018.05.08 15:15:03 LOG5[main]: Logging to C:\Users\dps_engineer\AppData\Local\stunnel.log 2018.05.08 15:15:53 LOG5[0]: Service [outlook-pop3] accepted connection from 126.10.230.254:52629 2018.05.08 15:15:53 LOG6[0]: failover: round-robin, starting at entry #1 2018.05.08 15:15:53 LOG6[0]: s_connect: connecting 40.97.135.130:995 2018.05.08 15:15:53 LOG5[0]: s_connect: connected 40.97.135.130:995 2018.05.08 15:15:53 LOG5[0]: Service [outlook-pop3] connected remote server from 126.10.218.222:60145 2018.05.08 15:15:53 LOG6[0]: SNI: sending servername: pop-mail.outlook.com 2018.05.08 15:15:53 LOG6[0]: Peer certificate not required 2018.05.08 15:15:54 LOG6[0]: Certificate verification disabled 2018.05.08 15:15:54 LOG6[0]: Certificate verification disabled 2018.05.08 15:15:54 LOG6[0]: Client certificate not requested 2018.05.08 15:15:54 LOG6[0]: TLS connected: new session negotiated 2018.05.08 15:15:54 LOG6[0]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.08 15:15:55 LOG6[0]: Read socket closed (readsocket) 2018.05.08 15:15:55 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2018.05.08 15:15:55 LOG6[0]: TLS socket closed (SSL_read) 2018.05.08 15:15:55 LOG5[0]: Connection closed: 58 byte(s) sent to TLS, 253 byte(s) sent to socket 2018.05.08 15:15:55 LOG5[1]: Service [outlook-smtp] accepted connection from 126.10.230.254:52639 2018.05.08 15:15:55 LOG6[1]: failover: round-robin, starting at entry #2 2018.05.08 15:15:55 LOG6[1]: s_connect: connecting 40.97.162.162:587 2018.05.08 15:15:55 LOG5[1]: s_connect: connected 40.97.162.162:587 2018.05.08 15:15:55 LOG5[1]: Service [outlook-smtp] connected remote server from 126.10.218.222:60147 2018.05.08 15:15:55 LOG6[1]: SNI: sending servername: smtp-mail.outlook.com 2018.05.08 15:15:55 LOG6[1]: Peer certificate not required 2018.05.08 15:15:55 LOG6[1]: Certificate verification disabled 2018.05.08 15:15:55 LOG6[1]: Certificate verification disabled 2018.05.08 15:15:55 LOG6[1]: Empty client CA list 2018.05.08 15:15:55 LOG6[1]: TLS connected: new session negotiated 2018.05.08 15:15:55 LOG6[1]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.08 15:16:00 LOG6[1]: TLS socket closed (SSL_read) 2018.05.08 15:16:00 LOG5[1]: Connection closed: 50 byte(s) sent to TLS, 194 byte(s) sent to socket 2018.05.08 15:16:00 LOG5[2]: Service [outlook-pop3] accepted connection from 126.10.230.254:52644 2018.05.08 15:16:00 LOG6[2]: failover: round-robin, starting at entry #2 2018.05.08 15:16:00 LOG6[2]: s_connect: connecting 40.97.161.50:995 2018.05.08 15:16:00 LOG5[2]: s_connect: connected 40.97.161.50:995 2018.05.08 15:16:00 LOG5[2]: Service [outlook-pop3] connected remote server from 126.10.218.222:60149 2018.05.08 15:16:00 LOG6[2]: SNI: sending servername: pop-mail.outlook.com 2018.05.08 15:16:00 LOG6[2]: Peer certificate not required 2018.05.08 15:16:00 LOG6[2]: Certificate verification disabled 2018.05.08 15:16:00 LOG6[2]: Certificate verification disabled 2018.05.08 15:16:00 LOG6[2]: Client certificate not requested 2018.05.08 15:16:00 LOG6[2]: TLS connected: new session negotiated 2018.05.08 15:16:00 LOG6[2]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.08 15:16:01 LOG6[2]: TLS socket closed (SSL_read) 2018.05.08 15:16:01 LOG5[2]: Connection closed: 58 byte(s) sent to TLS, 253 byte(s) sent to socket 2018.05.08 15:16:01 LOG5[3]: Service [outlook-smtp] accepted connection from 126.10.230.254:52647 2018.05.08 15:16:01 LOG6[3]: failover: round-robin, starting at entry #3 2018.05.08 15:16:01 LOG6[3]: s_connect: connecting 40.97.162.146:587 2018.05.08 15:16:01 LOG5[3]: s_connect: connected 40.97.162.146:587 2018.05.08 15:16:01 LOG5[3]: Service [outlook-smtp] connected remote server from 126.10.218.222:60150 2018.05.08 15:16:01 LOG6[3]: SNI: sending servername: smtp-mail.outlook.com 2018.05.08 15:16:01 LOG6[3]: Peer certificate not required 2018.05.08 15:16:01 LOG6[3]: Certificate verification disabled 2018.05.08 15:16:01 LOG6[3]: Certificate verification disabled 2018.05.08 15:16:01 LOG6[3]: Empty client CA list 2018.05.08 15:16:01 LOG6[3]: TLS connected: new session negotiated 2018.05.08 15:16:01 LOG6[3]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.08 15:16:03 LOG6[cron]: Executing cron jobs 2018.05.08 15:16:03 LOG6[cron]: Cron jobs completed in 0 seconds 2018.05.08 15:16:06 LOG6[3]: TLS socket closed (SSL_read) 2018.05.08 15:16:06 LOG5[3]: Connection closed: 50 byte(s) sent to TLS, 194 byte(s) sent to socket 2018.05.08 15:16:06 LOG5[4]: Service [outlook-pop3] accepted connection from 126.10.230.254:52653 2018.05.08 15:16:06 LOG6[4]: failover: round-robin, starting at entry #3 2018.05.08 15:16:06 LOG6[4]: s_connect: connecting 40.97.134.18:995 2018.05.08 15:16:06 LOG5[4]: s_connect: connected 40.97.134.18:995 2018.05.08 15:16:06 LOG5[4]: Service [outlook-pop3] connected remote server from 126.10.218.222:60153 2018.05.08 15:16:06 LOG6[4]: SNI: sending servername: pop-mail.outlook.com 2018.05.08 15:16:06 LOG6[4]: Peer certificate not required 2018.05.08 15:16:06 LOG6[4]: Certificate verification disabled 2018.05.08 15:16:06 LOG6[4]: Certificate verification disabled 2018.05.08 15:16:06 LOG6[4]: Client certificate not requested 2018.05.08 15:16:06 LOG6[4]: TLS connected: new session negotiated 2018.05.08 15:16:06 LOG6[4]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.08 15:16:07 LOG6[4]: Read socket closed (readsocket) 2018.05.08 15:16:07 LOG6[4]: SSL_shutdown successfully sent close_notify alert 2018.05.08 15:16:07 LOG6[4]: TLS socket closed (SSL_read) 2018.05.08 15:16:07 LOG5[4]: Connection closed: 58 byte(s) sent to TLS, 253 byte(s) sent to socket 2018.05.08 15:16:07 LOG5[5]: Service [outlook-smtp] accepted connection from 126.10.230.254:52656 2018.05.08 15:16:07 LOG6[5]: failover: round-robin, starting at entry #4 2018.05.08 15:16:07 LOG6[5]: s_connect: connecting 2603:1036:101::2:587 2018.05.08 15:16:07 LOG3[5]: s_connect: connect 2603:1036:101::2:587: Network is unreachable (WSAENETUNREACH) (10051) 2018.05.08 15:16:07 LOG6[5]: s_connect: connecting 2603:1036:102:108::2:587 2018.05.08 15:16:07 LOG3[5]: s_connect: connect 2603:1036:102:108::2:587: Network is unreachable (WSAENETUNREACH) (10051) 2018.05.08 15:16:07 LOG6[5]: s_connect: connecting 2603:1036:102:cc::2:587 2018.05.08 15:16:07 LOG3[5]: s_connect: connect 2603:1036:102:cc::2:587: Network is unreachable (WSAENETUNREACH) (10051) 2018.05.08 15:16:07 LOG6[5]: s_connect: connecting 2603:1036:102:8f::2:587 2018.05.08 15:16:07 LOG3[5]: s_connect: connect 2603:1036:102:8f::2:587: Network is unreachable (WSAENETUNREACH) (10051) 2018.05.08 15:16:07 LOG6[5]: s_connect: connecting 40.97.161.50:587 2018.05.08 15:16:08 LOG5[5]: s_connect: connected 40.97.161.50:587 2018.05.08 15:16:08 LOG5[5]: Service [outlook-smtp] connected remote server from 126.10.218.222:60158 2018.05.08 15:16:08 LOG6[5]: SNI: sending servername: smtp-mail.outlook.com 2018.05.08 15:16:08 LOG6[5]: Peer certificate not required 2018.05.08 15:16:08 LOG6[5]: Certificate verification disabled 2018.05.08 15:16:08 LOG6[5]: Certificate verification disabled 2018.05.08 15:16:08 LOG6[5]: Empty client CA list 2018.05.08 15:16:08 LOG6[5]: TLS connected: new session negotiated 2018.05.08 15:16:08 LOG6[5]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.08 15:16:13 LOG6[5]: TLS socket closed (SSL_read) 2018.05.08 15:16:13 LOG5[5]: Connection closed: 50 byte(s) sent to TLS, 194 byte(s) sent to socket Sent from Outlook<http://aka.ms/weboutlook>

2 1

Stunnel Time out Error
by Sedick Cloete 07 May '18

07 May '18

HI All, We recently moved our email server from an in-house server to Office 365. We are now in the process of replacing all our XP boxes with Windows 10. One of the boxes are running the email service which collects emails from Office 365, that we have just recently upgraded. This process works on the XP but times out on windows 10. Attached, is the time out the log file. Below is the code I am using: Basic program code * variables ChannelNo = 0 Pop3Server = 'outlook.office365.com' Pop3User = UserName Pop3Pass = Password Pop3Port = '995' ProxYServer = '127.0.0.1' ProxyPort = '110' ProxyDir = 'C:\see4OI\SSL\' ProxyExe = 'stunnel.exe' ProxyCert = 'stunnel.pem' * retreives mail in MIME format Gosub GET_EMAILS return Mail_Rec * ---------------------------------------------------------------------------- ------------- GET_EMAILS: * close previous session If it wasnt closed properly Code = seeClose(ChannelNo) Code = seeRelease() * attach key code Code = seeAttach(1, KeyCode) if Code < 0 then RetFlag = 1 return end * start stunnel Code = seeSetProxySSL(0, 1, ProxyDir, ProxyCert, ProxyExe) If Code < 0 Then RETURN end * connect to email server Code = seePop3ConnectSSL(ChannelNo, ProxyPort, Pop3Port, Pop3Server, Pop3User, Pop3Pass, ProxyServer) If Code < 0 Then RETURN End Your assistance in this regard will be highly appreciated. Thank you. Kind Regards, Logicore SEDICK CLOETE IT Business Consultant Cell: 083 228 7058 Fax: 086 515 9695 email: sedick(a)logicore.co.za If you are not the intended recipient of this communication, please notify the sender immediately. The information and/or attachment contained in this email is confidential and may contain proprietary and/or personal information. It is meant solely for the intended recipient. Access to this email by anyone else is unauthorised. If you are not the intended recipient, any processing of the email or the information contained therein (including disclosure, copying, distribution, storage) or any action taken or omitted in reliance on this, is prohibited and may be unlawful.

2 1

How to configure stunnel client on Mac
by Mark Foley 04 May '18

04 May '18

I've successfully set up stunnel for Windows and Linux clients. Now to set up for Mac. I've gone to the website http://macappstore.org/stunnel/ and followed the instructions there which are: 1. Press Command+Space and type Terminal and press enter/return key. 2. Run in Terminal app: ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" < /dev/null 2> /dev/null and press enter/return key. 3. Run: brew install stunnel And then it says, "Done! You can now use stunnel." Well, not exactly. Where do I put my stunnel.conf and certificate.pem? How do I make stunnel run automatically at boot time? The web instructions aren't very complete. Need additional assistance. THX --Mark

1 1

Stunnel in Windows Failover cluster
by Tobias Gillstöm 27 Apr '18

27 Apr '18

Hi, I'm currently using stunnel in a windows fail over cluster: My problem is that when a fail over occurs stunnel switches too the other node and says that stunnel is running and everything is fine. But when I check the logs for stunnel and the program that uses stunnel, it does not appear to be running or sending any data. In the screenshot you can see my stunnel configuration, in the startup parameters section it says "-service -install" my question is if it shouldn't say "-service -start" instead, has anyone else encountered this problem? And if this is the problem why does the stunnel service install with these parameters?

1 0

Ubuntu 16.04.4 LTS SSLv3 and SSlv2 running stunnel 5.44
by Joe Phillips 25 Apr '18

25 Apr '18

I am running stunnel 5.44 on Ubuntu 16.04.4 LTS with all updates. I cannot get devices to connect using sslv2 or 3. My conf file Options line as seen below : ;Enable support for inecure SSLv3 protocol Options = -NO_SSLv3 Options = -NO_SSLv2 I continuously get error 1408A10B SSL routines: ssl3_get_client_hello:wrong version number Do I not have SSL3 and 2 correctly defined in my conf file? I realize 2 and 3 are no longer secure, but I need to support them while I transition to TLS 1.2 thanks [cid:image001.png@01D3DC17.D1AFBC30]

2 1