- stunnel-users - stunnel.org

sTunnel client connecting to load balanced URL - stunnel 5.02 on x86-pc-msvc-1500 platform
by Tony 19 Mar '18

19 Mar '18

Hi all, I have a situation where I'm trying to use sTunnel as the client to connect to a service on a secure URL, but the hiccup is that the secure URL is load balanced. If a do an nslookup on the URL, the response comes back as it being an alias. Non-authoritative answer: Name: eu1571393051174.ssl.ondemand.com Address: 155.56.210.164 Aliases: l4884-iflmap.hcisbp.eu1.hana.ondemand.com Looking at the sTunnel log, it resolves to the IP of the server. But the IP itself does not host the service so I'm getting http:503 errors. 2018.03.16 14:44:44 LOG7[18796]: Service [ssl-OSRdev] (FD=564) bound to 0.0.0.0:8085 2018.03.16 14:44:55 LOG7[18796]: Service [ssl-OSRdev] accepted (FD=572) from 192.168.0.22:61093 2018.03.16 14:44:55 LOG7[18796]: Creating a new thread 2018.03.16 14:44:55 LOG7[18796]: New thread created 2018.03.16 14:44:55 LOG7[30864]: Service [ssl-OSRdev] started 2018.03.16 14:44:55 LOG5[30864]: Service [ssl-OSRdev] accepted connection from 192.168.0.22:61093 2018.03.16 14:44:55 LOG6[30864]: s_connect: connecting 155.56.210.164:443 2018.03.16 14:44:55 LOG7[30864]: s_connect: s_poll_wait 155.56.210.164:443: waiting 10 seconds 2018.03.16 14:44:56 LOG5[30864]: s_connect: connected 155.56.210.164:443 2018.03.16 14:44:56 LOG5[30864]: Service [ssl-OSRdev] connected remote server from 192.168.0.32:30269 2018.03.16 14:44:56 LOG7[30864]: Remote socket (FD=588) initialized 2018.03.16 14:44:56 LOG7[30864]: SNI: sending servername: l4884-iflmap.hcisbp.eu1.hana.ondemand.com 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): before/connect initialization 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv2/v3 write client hello A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 read server hello A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 read server certificate A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 read server key exchange A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 read server certificate request A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 read server done A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 write client certificate A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 write client key exchange A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 write certificate verify A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 write change cipher spec A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 write finished A 2018.03.16 14:44:56 LOG7[30864]: SSL state (connect): SSLv3 flush data 2018.03.16 14:44:57 LOG7[30864]: SSL state (connect): SSLv3 read finished A 2018.03.16 14:44:57 LOG7[30864]: 1 items in the session cache 2018.03.16 14:44:57 LOG7[30864]: 1 client connects (SSL_connect()) 2018.03.16 14:44:57 LOG7[30864]: 1 client connects that finished 2018.03.16 14:44:57 LOG7[30864]: 0 client renegotiations requested 2018.03.16 14:44:57 LOG7[30864]: 0 server connects (SSL_accept()) 2018.03.16 14:44:57 LOG7[30864]: 0 server connects that finished 2018.03.16 14:44:57 LOG7[30864]: 0 server renegotiations requested 2018.03.16 14:44:57 LOG7[30864]: 0 session cache hits 2018.03.16 14:44:57 LOG7[30864]: 0 external session cache hits 2018.03.16 14:44:57 LOG7[30864]: 0 session cache misses 2018.03.16 14:44:57 LOG7[30864]: 0 session cache timeouts 2018.03.16 14:44:57 LOG7[30864]: Peer certificate was cached (3826 bytes) 2018.03.16 14:44:57 LOG6[30864]: SSL connected: new session negotiated 2018.03.16 14:44:57 LOG6[30864]: Negotiated TLSv1/SSLv3 ciphersuite: ECDHE-RSA-AES128-GCM-SHA256 (128-bit encryption) 2018.03.16 14:44:57 LOG6[30864]: Compression: null, expansion: null 2018.03.16 14:44:58 LOG6[30864]: SSL socket closed (SSL_read) 2018.03.16 14:44:58 LOG7[30864]: Sent socket write shutdown 2018.03.16 14:44:58 LOG5[30864]: Connection closed: 1730 byte(s) sent to SSL, 274 byte(s) sent to socket 2018.03.16 14:44:58 LOG7[30864]: Remote socket (FD=588) closed 2018.03.16 14:44:58 LOG7[30864]: Local socket (FD=572) closed 2018.03.16 14:44:58 LOG7[30864]: Service [ssl-OSRdev] finished (0 left) 2018.03.16 14:44:58 LOG7[30864]: str_stats: 3 block(s), 4294962489 data byte(s), 150 control byte(s) 2018.03.16 14:44:58 LOG7[30864]: str_stats: 20 byte(s) at ..\src\network.c:413 2018.03.16 14:44:58 LOG7[30864]: str_stats: 20 byte(s) at ..\src\network.c:412 2018.03.16 14:44:58 LOG7[30864]: str_stats: 20 byte(s) at ..\src\network.c:411 I have tested the service using SoapUI and it works. Is it possible to have sTunnel follow the URL redirection? Regards, Tony

2 1

Re: [stunnel-users] basic usage question
by Mark Foley 19 Mar '18

19 Mar '18

Solved! I've fixed up the various ports and now I am able to connect. For the edification of other list readers I'll summarize. I have a local Linux host acting as firewall/router. It routes requests on port 1234 to port 3389 on a local Linux workstation which is running x11vnc server listening on its local port 5900. I want to connect to this VNC server from a remote vnc viewer. (Why does the router forward to port 3389? Because the workstaion can dual-boot Windows, so the forward works regardless of booted OS.) Remote vnc viewer, stunnel client stunnel.conf: verify = 2 pid = /home/mfoley/.stunnel/stunnel.pid CAfile = /home/mfoley/.stunnel/certificate.pem client = yes [x11vnc] accept = 5900 connect = router.obfuscate.org:1234 Local workstation vnc server, stunnel server stunnel.conf: pid = /var/run/stunnel.pid debug = 7 [x11vnc] accept = 3389 key = /root/privatekey.pem cert = /root/certificate.pem connect = 127.0.0.1:5900 The certificate is self-signed and created on the stunnel/vnc server host using the following commands: openssl genrsa -out privatekey.pem 2048 openssl req -new -x509 -days 365 -key privatekey.pem -out certificate.pem The certificate.pem is copied to the stunnel client host. With x11vnc listening on 5900 on the local workstation and with 'stunnel stunnel.conf' running on both stunnel client (as the normal user) and server hosts, I use the remote vnc viewer, logged in as a normal user, with the connection 127.0.0.1:5900 I'm guessing I could configure my vnc viewers to connect to multiple clients with difference [service] sections, for example: verify = 2 pid = /home/mfoley/.stunnel/stunnel.pid CAfile = /home/mfoley/.stunnel/certificate.pem client = yes [remoteHost1] accept = 5900 connect = router.obfuscate.org:1234 [remoteHost2] accept = 5901 connect = router.obfuscate.org:4321 I haven't tried that, but I will. I futher guess that I could have different CAfiles per server if I moved that directive to the respective service defintions (can someone confirm?), but I haven't tried that either. Thanks especially to Flo Rance for helping me work through this. Now, I have to figure out how to do this from a Windows client! --Mark

2 1

Creating CSR for GoDaddy
by John McClymont 15 Mar '18

15 Mar '18

Good Morning, As a novice user of stunnel. I use stunnel to make and encrypted video connection to home security system. I wish to create an SSL certificate request to obtain an SSL from GoDaddy I use the following command openssl req -new -newkey rsa:2048 -nodes -keyout c:\key\private_key.key -out c:\key\request.csr Is this correct? thanks in advance for suggestions

2 1

Re: [stunnel-users] basic usage question
by Mark Foley 15 Mar '18

15 Mar '18

Nitin - sorry, I didn't realize this was a response to my message and I sent a followup message before reading this one. I have your patch in a previous message. I'm not familiar with "patching". Can you give me quickie instructions on doing that, or refer me to a link that explains it? I assume I need to patch the source code, right? If so, I have stunnel version 5.35. Do I need to apply this patch to a more recent version? Are there any other sslVersions stunnel supports? Thanks --Mark -----Original Message----- On Tue, 13 Mar 2018 22:21:24 +0400 Nitin Mutkawoa <jmutkawoa(a)hackers.mu> wrote: > > hello > > Sorry, I was not clear enough in my previous mail. > The patch allows you to specify TLS 1.3 in the configuration file and do a > TLS 1.3 only. > > regards > > Nitin J Mutkawoa > > https://tunnelix.com > https://hackers.mu > > Twitter: @TheTunnelix > > On Tue, Mar 13, 2018 at 3:13 PM, Ma??gorzata Olszówka < > Malgorzata.Olszowka(a)stunnel.org> wrote: > > > I'm also working on TLS 1.3 compatibility with Stunnel. I will reach the > >> mailing list as soon as possible with a tested patch. > >> > > > > Hello Nitin, > > Could you specify what problem do you have with TLS 1.3. > > It works for me: > > > > 2018.03.13 11:39:06 LOG5[ui]: stunnel 5.44 on x86_64-unknown-linux-gnu > > platform > > 2018.03.13 11:39:06 LOG5[ui]: Compiled/running with OpenSSL > > 1.1.1-pre2-dev xx XXX xxxx > > ??? > > 2018.03.13 11:39:23 LOG6[0]: Negotiated TLSv1.3 ciphersuite > > TLS13-AES-256-GCM-SHA384 (256-bit encryption) > > > > > > Regards, > > Ma??gorzata > > _______________________________________________ > > stunnel-users mailing list > > stunnel-users(a)stunnel.org > > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > >

1 1

Re: [stunnel-users] basic usage question
by Mark Foley 14 Mar '18

14 Mar '18

Thanks to help from Nitin, I've made a tiny bit of progress with stunnel. I've created the certificates per Nitin's instructions at https://tunnelix.com/securing-mysql-traffic-with-stunnel-in-a-jail-environm… Certificates have permissions 0600. I want to use a VNC client on Linux to connect to a VNC Server also on Linux. In between these two computers I have a Linux router which routes all request to port 1914 to port 3389 on the VNC Server. stunnel on the server is run at the command line by root: 'stunnel /root/stunnel.conf'. Here is my VNC Server computer's stunnel.conf: foreground = yes pid = /var/run/stunnel.pid debug = 7 ; output = /root/stunnel.log output = /dev/stdout [x11vnc] accept = 3389 key = /root/privatekey.pem cert = /root/certificate.pem connect = 127.0.0.1:5900 stunnel on the client is run by a normal user, stunnel $HOME/.stunnel/stunnel.conf. Below is my client stunnel.conf: foreground = yes verify = 2 pid = /home/mfoley/.stunnel/stunnel.pid CAfile = /home/mfoley/.stunnel/certificate.pem client = yes [x11vnc] accept = 5900 connect = mail.ohprs.org:1914 When I run stunnel on the client I get: 2018.03.13 13:21:17 LOG5[ui]: stunnel 5.35 on x86_64-slackware-linux-gnu platform 2018.03.13 13:21:17 LOG5[ui]: Compiled with OpenSSL 1.0.2h 3 May 2016 2018.03.13 13:21:17 LOG5[ui]: Running with OpenSSL 1.0.2n 7 Dec 2017 2018.03.13 13:21:17 LOG5[ui]: Update OpenSSL shared libraries or rebuild stunnel 2018.03.13 13:21:17 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP 2018.03.13 13:21:17 LOG5[ui]: Reading configuration from file /home/mfoley/.stunnel/stunnel.conf 2018.03.13 13:21:17 LOG5[ui]: UTF-8 byte order mark not detected 2018.03.13 13:21:17 LOG5[ui]: FIPS mode disabled 2018.03.13 13:21:17 LOG4[ui]: Service [x11vnc] uses "verify = 2" without subject checks 2018.03.13 13:21:17 LOG4[ui]: Use "checkHost" or "checkIP" to restrict trusted certificates 2018.03.13 13:21:17 LOG5[ui]: Configuration successful On the client, I then run tigerVNCViewer connecting to 127.0.0.1::5900. I get the following messages on the client: 2018.03.13 13:22:03 LOG5[0]: Service [x11vnc] accepted connection from 127.0.0.1:35034 2018.03.13 13:22:03 LOG5[0]: s_connect: connected 98.102.63.107:1914 2018.03.13 13:22:03 LOG5[0]: Service [x11vnc] connected remote server from 192.168.0.17:40512 2018.03.13 13:22:03 LOG3[0]: SSL_connect: 140770FC: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol 2018.03.13 13:22:03 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket Just guessing, but is it failing with the SSLVersion? Help appreciated. Thanks, Mark

1 1

[PATCH] TLS 1.3 Compatibility
by Nitin Mutkawoa 13 Mar '18

13 Mar '18

Hello, To add TLS 1.3 compatibility on Stunnel, the following patch was applied and tested. --- options.c.orig 2018-03-13 04:06:01.410477727 +0000 +++ options.c 2018-03-13 05:42:51.883782519 +0000 @@ -2675,6 +2675,18 @@ NOEXPORT char *parse_service_option(CMD #else /* defined(OPENSSL_NO_TLS1_2) */ return "TLSv1.2 not supported"; #endif /* !defined(OPENSSL_NO_TLS1_2) */ + } else if(!strcasecmp(arg, "TLSv1.3")) { +#ifndef OPENSSL_NO_TLS1_3 + section->client_method=(SSL_METHOD *)TLS_client_method(); + section->server_method=(SSL_METHOD *)TLS_server_method(); + section->ssl_options_set|= SSL_OP_NO_SSLv2; + section->ssl_options_set|= SSL_OP_NO_SSLv3; + section->ssl_options_set|= SSL_OP_NO_TLSv1; + section->ssl_options_set|= SSL_OP_NO_TLSv1_1; + section->ssl_options_set|= SSL_OP_NO_TLSv1_2; +#else /* defined(OPENSSL_NO_TLS1_3) */ + return "TLSv1.3 not supported"; +#endif #endif /* OPENSSL_API_COMPAT<0x10100000L */ } else return "Incorrect version of TLS protocol"; Please see this link for more info about the test for TLS 1.3 https://gist.github.com/jmutkawoa/c97f5d67ded592f6ad04389a3ade623e Regards Nitin J Mutkawoa https://tunnelix.com https://hackers.mu Twitter: @TheTunnelix

1 0

basic usage question
by Mark Foley 10 Mar '18

10 Mar '18

I'm trying to set up an ssl tunnel for VNC per the instructions at https://www.ibm.com/developerworks/library/l-sslvnc/index.html. I've not gotten very far into the steps. I tried: # stunnel -d 5905 -r 5900 -p /root/combined.pem [ ] Clients allowed=500 [.] stunnel 5.35 on x86_64-slackware-linux-gnu platform [.] Compiled with OpenSSL 1.0.2h 3 May 2016 [.] Running with OpenSSL 1.0.2n 7 Dec 2017 [.] Update OpenSSL shared libraries or rebuild stunnel [.] Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP [ ] errno: (*__errno_location ()) [!] Invalid configuration file name "-d" [!] realpath: No such file or directory (2) [ ] Cron thread initialized I find nothing on the -d, -r or -p options in the manpage. This is my 1st posting to this list. I have very rudimentary skills with ssl, ssh, and certificates, mainly limited to getting certificates from a provider and installing for web and email; and creating public keys for ssh login using ssh-keygen. That's about it, so I'm pretty much a certified newbie. Help getting past the starting gate would be greatly appreciated. THX --Mark

1 0

[PATCH] Spectre v2 Vulnerability Mitigations
by Nitin Mutkawoa 07 Mar '18

07 Mar '18

Hello To prevent any leakage (Spectre v2) from a compromised VM on same physical host, this patch would mitigate the impact. --- configure.ac.orig 2018-03-04 01:46:55.877067173 +0400 +++ configure.ac 2018-03-04 01:49:26.422625147 +0400 @@ -101,6 +101,11 @@ if test "$GCC" = yes; then fi AX_APPEND_COMPILE_FLAGS([-D_FORTIFY_SOURCE=2]) +# Spectre v2 mitigations +AX_APPEND_COMPILE_FLAGS([-mfunction-return=thunk]) +AX_APPEND_COMPILE_FLAGS([-mindirect-branch=thunk]) + AC_MSG_NOTICE([**************************************** libtool]) LT_INIT([disable-static]) AC_SUBST([LIBTOOL_DEPS]) Kind regards, Nitin J Mutkawoa https://tunnelix.com https://hackers.mu

1 0

Re: [stunnel-users] Connect using TLS with public Web Server
by peter＠easthope.ca 06 Mar '18

06 Mar '18

From: Carlos Castro <carlos.castro.guerrero(a)gmail.com> Date: Fri, 2 Feb 2018 12:04:08 +0100 > I have older application and now I need connect with external server HTTPS > using TLS . My application doesn't support with TLS and I think use Stunnel > to connect with this Server HTTPS. Same requirement here. Have you tried this configuration? ; yourhost:/etc/stunnel4/stunnel.conf ... [https] client = yes accept = 443 transparent = destination Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca https://en.wikibooks.org/wiki/Medical_Suction_Machines https://en.wikibooks.org/wiki/Oberon

3 6

Stunnel in server mode with certificate from the Windows Certificate Store
by merlin＠mp3merlin.net 06 Mar '18

06 Mar '18

Hello, I'm trying to use stunnel in server mode with certificates from the Windows Certificate Store. I have a basic configuration which is working with a PEM certificate file and I'm trying to get it to use a cert via the CAPI engine. Here is my basic (working) config: debug = debug output = C:\stunnel\stunnel.log options = -NO_SSLv3 [https] accept = 443 connect = 80 cert = stunnel.pem Here is my config using the CAPI engine: debug = debug output = C:\stunnel\stunnel.log engine = capi engineCtrl = debug_level:2 engineCtrl = debug_file:c:\stunnel\capi.log engineCtrl = store_flags:1 engineCtrl = list_certs options = -NO_SSLv3 [https] accept = 443 connect = 80 engineId = capi However stunnel does not seem to find a certificate to use: [...] 2018.03.06 10:22:05 LOG7[main]: Enabling support for engine "capi" 2018.03.06 10:22:05 LOG7[main]: Executing engine control command debug_level:2 2018.03.06 10:22:05 LOG7[main]: Executing engine control command debug_file:c:\stunnel\capi.log 2018.03.06 10:22:05 LOG7[main]: Executing engine control command store_flags:1 2018.03.06 10:22:05 LOG7[main]: Executing engine control command list_certs 2018.03.06 10:22:05 LOG7[main]: Initializing engine #1 (capi) 2018.03.06 10:22:05 LOG6[main]: Engine #1 (capi) initialized [...] 2018.03.06 10:22:05 LOG6[main]: Initializing service [https] 2018.03.06 10:22:05 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2018.03.06 10:22:05 LOG7[main]: TLS options: 0x01004004 (+0x03004000, -0x02000000) 2018.03.06 10:22:05 LOG7[main]: No certificate or private key specified [...] And I have no certificates listed in the CAPI debug log: Setting debug level to 2 Setting debug file to c:\stunnel\capi.log Setting flags to 1 Listing certs for store MY Opening certificate store MY capi_cert_get_fname When I load the engine via OpenSSL, I can see that a certificate is present in the store: C:\stunnel\bin>openssl.exe engine -t dynamic -pre "SO_PATH:C:\stunnel\engines\capi.dll" -pre LOAD -post store_flags:1 -post store_name:MY -post list_certs WARNING: can't open config file: /devel/win32/openssl/openssl.cnf (dynamic) Dynamic engine loading support [Success]: SO_PATH:C:\stunnel\engines\capi.dll [Success]: LOAD Loaded: (capi) CryptoAPI ENGINE [ available ] [Success]: store_flags:1 Certificate 0 Friendly Name "test" Subject: CN = test Issuer: CN = test [Success]: list_certs This certificate (and the associated private key) has been generated via the IIS Manager console and I have imported it in the Local Computer Store (with the private key). Does anybody have any idea what I am missing to get this to work ? I can provide more logs and run more tests if necessary. I'm using Stunnel 5.44 on Windows 2008 R2. I tried with an older version (5.40) but same problem. Thanks. Kevin

1 0