- stunnel-users - stunnel.org

Fwd: [stunnel-users] Stunnel client not sending data
by Jeremiah Martell 26 Oct '06

26 Oct '06

I forgot to send this to the entire group. My server program was listening on the wrong port. :-) Thanks, - Jeremiah ---------- Forwarded message ---------- From: Jeremiah Martell <inlovewithgod(a)gmail.com> Date: Oct 25, 2006 8:59 AM Subject: Re: [stunnel-users] Stunnel client not sending data To: Carter Browne <cbrowne(a)cbcs-usa.com> HA! Such a simple thing, but yes, that was the problem. I had the wrong port. :-) Thanks, - Jeremiah On 10/25/06, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: > Jeremiah, > > I set the debug level on a stunnel configuration to 7 to understand better where you are failing. You have established > good connection to stunnel, but stunnel cannot get to 127.0.0.1:10000. So is your application listening on > 127.0.0.1:10000? Have you tried running netstat -an to establish that there is a process listening to the port? > > Carter > > Jeremiah Martell wrote: > > Carter, > > > > You're right. That was a typo error on my part. My config says 1.2.3.70. > > > > Anything other ideas? > > > > Thanks, > > - Jeremiah > > > > On 10/25/06, Carter Browne <cbrowne(a)cbcs-usa.com> wrote: > >> On the server side, I think you should be receiving on 1.2.3.70 (since > >> that is where you are sending the data). > >> > >> Carter > >> > >> Jeremiah Martell wrote: > >> > Hello, > >> > > >> > I have a program that opens up a connection to port 10000 of a server > >> > and sends it some data. It works normally. I'm trying to "stunnel" > >> > both ends. > >> > > >> > In my program I create a socket, connect to local port 7033, send my > >> > data, and close the socket. I verified that every function call > >> > returns success (socket, setsockopt (for TCP_NODELAY), gethostbyname, > >> > connect, and send). > >> > > >> >> From what the logs show below, it seems that server stunnel gets the > >> > connection from the client stunnel, they successfully negotiate the > >> > SSL stuff, then the client stunnel waits for any data to proxy to the > >> > server stunnel. The server stunnel is waiting too, and after 10 > >> > seconds of no data, it closes the socket. > >> > > >> > For some reason the client stunnel is not getting my data and > >> > therefore doesn't forward anything over to the server stunnel. I'm not > >> > sure why this is happening, because my program works normally and I've > >> > verified that everything returned success. > >> > > >> > Any ideas? > >> > > >> > - Jeremiah > >> > > >> > ----------------------------- > >> > > >> > ON CLIENT (1.2.3.60) > >> > > >> > Linux > >> > stunnel 4.16 > >> > OpenSSL 0.9.7c > >> > > >> > stunnel.conf is... > >> > pid = > >> > client = yes > >> > > >> > [7033] > >> > accept = 127.0.0.1:7033 > >> > connect = 1.2.3.70:7033 > >> > > >> > ----------------------------- > >> > > >> > ON SERVER (1.2.3.70) > >> > > >> > Windows > >> > stunnel 4.16 windows binary installer (Aug 31 2006) > >> > > >> > stunnel.conf is... > >> > > >> > cert = stunnel.pem > >> > socket = l:TCP_NODELAY=1 > >> > socket = r:TCP_NODELAY=1 > >> > debug = 7 > >> > > >> > [7033] > >> > accept = 1.2.3.60:7033 > >> > connect = 127.0.0.1:10000 > >> > > >> > ----------------------------- > >> > > >> > On client I see this debug... > >> > > >> > Oct 24 14:38:22 stunnel: LOG5[2892:258]: 7033 connected from > >> > 127.0.0.1:10251 > >> > Oct 24 14:38:32 stunnel: LOG3[2892:258]: SSL_read: Connection reset by > >> > peer (104) > >> > Oct 24 14:38:32 stunnel: LOG5[2892:258]: Connection reset: 56 bytes > >> > sent to SSL, 0 bytes send to socket > >> > > >> > ----------------------------- > >> > > >> > On server I see this debug... > >> > > >> > 2006.10.24 14:43:08 LOG7[2596:4068]: 7033 accepted FD=196 from > >> > 1.2.3.60:10252 > >> > 2006.10.24 14:43:08 LOG7[2596:4068]: Creating a new thread > >> > 2006.10.24 14:43:09 LOG7[2596:4068]: New thread created > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 7033 started > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: FD 196 in non-blocking mode > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: TCP_NODELAY option set on local > >> socket > >> > 2006.10.24 14:43:09 LOG5[2596:2372]: 7033 connected from 1.2.3.60:10252 > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): before/accept > >> > initialization > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 read > >> > client hello A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write > >> > server hello A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write > >> > certificate A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write > >> > server done A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 flush > >> data > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 read > >> > client key exchange A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 read > >> > finished A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write > >> > change cipher spec A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write > >> > finished A > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 flush > >> data > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 3 items in the session cache > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 0 client connects > >> (SSL_connect()) > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 0 client connects that finished > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 0 client renegotiations > >> requested > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 5 server connects > >> (SSL_accept()) > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 5 server connects that finished > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 0 server renegotiations > >> requested > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 1 session cache hits > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 1 session cache misses > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 1 session cache timeouts > >> > 2006.10.24 14:43:09 LOG6[2596:2372]: SSL accepted: new session > >> negotiated > >> > 2006.10.24 14:43:09 LOG6[2596:2372]: Negotiated ciphers: AES256-SHA > >> > SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: FD 180 in non-blocking mode > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: 7033 connecting 127.0.0.1:10000 > >> > 2006.10.24 14:43:09 LOG7[2596:2372]: connect_wait: waiting 10 seconds > >> > 2006.10.24 14:43:19 LOG6[2596:2372]: connect_wait: s_poll_wait timeout > >> > 2006.10.24 14:43:19 LOG5[2596:2372]: Connection reset: 0 bytes sent to > >> > SSL, 0 bytes sent to socket > >> > 2006.10.24 14:43:19 LOG7[2596:2372]: 7033 finished (0 left) > >> > _______________________________________________ > >> > stunnel-users mailing list > >> > stunnel-users(a)mirt.net > >> > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > >> > > >> > >> > >> > > > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)mirt.net > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > > > >

1 0

Trying to redirect with stunnel - seems to hang
by Len DiMaggio 26 Oct '06

26 Oct '06

'Evening everyone, I'm wondering if anyone has already seen a problem like this. Background - I'm trying to use stunnel to act as an SSL server and redirect connections so that I can use the JMeter script recorder to build automated tests for an app's web GUI. (The recorder does not support SSL.) The software versions are: stunnel 4.15 on i686-redhat-linux-gnu with OpenSSL 0.9.8b 04 May 2006 I'm able to set up the redirection, and everything in the stunnel log looks OK - and, this is just making the connection manually - without JMeter - but trying to access the target app just hangs in the browser with a "connecting to..." status message. Here's the stunnel config file that I'm using - the log is attached. client=yes output=/tmp/stunnel.log debug=debug [8084] accept=hostname:8079 connect=hostname:8084 Interestingly - when I kill the stunnel process, the browser displays (most of) the target app's top level page. Thanks in advance, Len DiMaggio ldimaggi(a)redhat.com The stunnel log sez: 2006.10.24 04:58:33 LOG5[5869:3086362304]: stunnel 4.15 on i686-redhat-linux-gnu with OpenSSL 0.9.8b 04 May 2006 2006.10.24 04:58:33 LOG5[5869:3086362304]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2006.10.24 04:58:33 LOG6[5869:3086362304]: file ulimit = 1024 (can be changed with 'ulimit -n') 2006.10.24 04:58:33 LOG6[5869:3086362304]: poll() used - no FD_SETSIZE limit for file descriptors 2006.10.24 04:58:33 LOG5[5869:3086362304]: 500 clients allowed 2006.10.24 04:58:33 LOG7[5869:3086362304]: FD 4 in non-blocking mode 2006.10.24 04:58:33 LOG7[5869:3086362304]: FD 5 in non-blocking mode 2006.10.24 04:58:33 LOG7[5869:3086362304]: FD 6 in non-blocking mode 2006.10.24 04:58:33 LOG7[5869:3086362304]: SO_REUSEADDR option set on accept socket 2006.10.24 04:58:33 LOG7[5869:3086362304]: 8084 bound to 10.15.49.274:8079 2006.10.24 04:58:33 LOG7[5870:3086362304]: Created pid file /var/run/stunnel.pid 2006.10.24 04:58:52 LOG7[5870:3086362304]: 8084 accepted FD=7 from 172.16.83.99:58417 2006.10.24 04:58:52 LOG7[5870:3086359440]: 8084 started 2006.10.24 04:58:52 LOG7[5870:3086359440]: FD 7 in non-blocking mode 2006.10.24 04:58:52 LOG7[5870:3086359440]: FD 8 in non-blocking mode 2006.10.24 04:58:52 LOG7[5870:3086359440]: FD 9 in non-blocking mode 2006.10.24 04:58:52 LOG7[5870:3086362304]: Cleaning up the signal pipe 2006.10.24 04:58:52 LOG6[5870:3086362304]: Child process 5874 finished with code 0 2006.10.24 04:58:52 LOG7[5870:3086359440]: Connection from 172.16.83.99:58417 permitted by libwrap 2006.10.24 04:58:52 LOG5[5870:3086359440]: 8084 connected from 172.16.83.99:58417 2006.10.24 04:58:52 LOG7[5870:3086359440]: FD 8 in non-blocking mode 2006.10.24 04:58:52 LOG7[5870:3086359440]: 8084 connecting 10.15.49.274:8084 2006.10.24 04:58:52 LOG7[5870:3086359440]: connect_wait: waiting 10 seconds 2006.10.24 04:58:52 LOG7[5870:3086359440]: connect_wait: connected 2006.10.24 04:58:52 LOG7[5870:3086359440]: Remote FD=8 initialized 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): before/connect initialization 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 write client hello A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 read server hello A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 read server certificate A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 read server done A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 write client key exchange A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 write change cipher spec A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 write finished A 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 flush data 2006.10.24 04:58:52 LOG7[5870:3086359440]: SSL state (connect): SSLv3 read finished A 2006.10.24 04:58:52 LOG7[5870:3086359440]: 1 items in the session cache 2006.10.24 04:58:52 LOG7[5870:3086359440]: 1 client connects (SSL_connect()) 2006.10.24 04:58:52 LOG7[5870:3086359440]: 1 client connects that finished 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 client renegotiations requested 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 server connects (SSL_accept()) 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 server connects that finished 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 server renegotiations requested 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 session cache hits 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 session cache misses 2006.10.24 04:58:52 LOG7[5870:3086359440]: 0 session cache timeouts 2006.10.24 04:58:52 LOG6[5870:3086359440]: SSL connected: new session negotiated 2006.10.24 04:58:52 LOG6[5870:3086359440]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 -- Len DiMaggio (ldimaggi(a)redhat.com) Red Hat USA 10 Technology Park Drive Westford, MA 01886 tel: 978.392.3179 cell: 617.872.3673 http://www.redhat.com

3 2

status of www.stunnel.org
by Steven Van Acker 26 Oct '06

26 Oct '06

Hi, I noticed how the website http://www.stunnel.org is out of sync with the latest releases of stunnel. Are there plans to update this site ? And if not, would it be possible to redirect its visitors to http://stunnel.mirt.net/ automatically ? kind regards, -- Steven Van Acker -- My amazon wishlist: http://www.amazon.com/gp/registry/1DB4XNEIEQBPB

2 1

Stunnel client not sending data
by Jeremiah Martell 26 Oct '06

26 Oct '06

Hello, I have a program that opens up a connection to port 10000 of a server and sends it some data. It works normally. I'm trying to "stunnel" both ends. In my program I create a socket, connect to local port 7033, send my data, and close the socket. I verified that every function call returns success (socket, setsockopt (for TCP_NODELAY), gethostbyname, connect, and send). >From what the logs show below, it seems that server stunnel gets the connection from the client stunnel, they successfully negotiate the SSL stuff, then the client stunnel waits for any data to proxy to the server stunnel. The server stunnel is waiting too, and after 10 seconds of no data, it closes the socket. For some reason the client stunnel is not getting my data and therefore doesn't forward anything over to the server stunnel. I'm not sure why this is happening, because my program works normally and I've verified that everything returned success. Any ideas? - Jeremiah ----------------------------- ON CLIENT (1.2.3.60) Linux stunnel 4.16 OpenSSL 0.9.7c stunnel.conf is... pid = client = yes [7033] accept = 127.0.0.1:7033 connect = 1.2.3.70:7033 ----------------------------- ON SERVER (1.2.3.70) Windows stunnel 4.16 windows binary installer (Aug 31 2006) stunnel.conf is... cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 [7033] accept = 1.2.3.60:7033 connect = 127.0.0.1:10000 ----------------------------- On client I see this debug... Oct 24 14:38:22 stunnel: LOG5[2892:258]: 7033 connected from 127.0.0.1:10251 Oct 24 14:38:32 stunnel: LOG3[2892:258]: SSL_read: Connection reset by peer (104) Oct 24 14:38:32 stunnel: LOG5[2892:258]: Connection reset: 56 bytes sent to SSL, 0 bytes send to socket ----------------------------- On server I see this debug... 2006.10.24 14:43:08 LOG7[2596:4068]: 7033 accepted FD=196 from 1.2.3.60:10252 2006.10.24 14:43:08 LOG7[2596:4068]: Creating a new thread 2006.10.24 14:43:09 LOG7[2596:4068]: New thread created 2006.10.24 14:43:09 LOG7[2596:2372]: 7033 started 2006.10.24 14:43:09 LOG7[2596:2372]: FD 196 in non-blocking mode 2006.10.24 14:43:09 LOG7[2596:2372]: TCP_NODELAY option set on local socket 2006.10.24 14:43:09 LOG5[2596:2372]: 7033 connected from 1.2.3.60:10252 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): before/accept initialization 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 read client hello A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write server hello A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write certificate A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write server done A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 flush data 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 read client key exchange A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 read finished A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write change cipher spec A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 write finished A 2006.10.24 14:43:09 LOG7[2596:2372]: SSL state (accept): SSLv3 flush data 2006.10.24 14:43:09 LOG7[2596:2372]: 3 items in the session cache 2006.10.24 14:43:09 LOG7[2596:2372]: 0 client connects (SSL_connect()) 2006.10.24 14:43:09 LOG7[2596:2372]: 0 client connects that finished 2006.10.24 14:43:09 LOG7[2596:2372]: 0 client renegotiations requested 2006.10.24 14:43:09 LOG7[2596:2372]: 5 server connects (SSL_accept()) 2006.10.24 14:43:09 LOG7[2596:2372]: 5 server connects that finished 2006.10.24 14:43:09 LOG7[2596:2372]: 0 server renegotiations requested 2006.10.24 14:43:09 LOG7[2596:2372]: 1 session cache hits 2006.10.24 14:43:09 LOG7[2596:2372]: 1 session cache misses 2006.10.24 14:43:09 LOG7[2596:2372]: 1 session cache timeouts 2006.10.24 14:43:09 LOG6[2596:2372]: SSL accepted: new session negotiated 2006.10.24 14:43:09 LOG6[2596:2372]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2006.10.24 14:43:09 LOG7[2596:2372]: FD 180 in non-blocking mode 2006.10.24 14:43:09 LOG7[2596:2372]: 7033 connecting 127.0.0.1:10000 2006.10.24 14:43:09 LOG7[2596:2372]: connect_wait: waiting 10 seconds 2006.10.24 14:43:19 LOG6[2596:2372]: connect_wait: s_poll_wait timeout 2006.10.24 14:43:19 LOG5[2596:2372]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.10.24 14:43:19 LOG7[2596:2372]: 7033 finished (0 left)

3 4

[OT] Questions about OpenSSL
by Gonzalo Diethelm 25 Oct '06

25 Oct '06

Hello everyone, I have a slightly off-topic question but one I think stunnel's developers are in a good position to assist me with. I need to implement what amounts to an embedded web server for a process that will be deployed on a "hostile" server (Win32), meaning that I don't want the people in that server to mess around with either the process or the network traffic to/from the process. The goal is to deploy a binary and a set of DLLs to the hostile server (no configuration files). To this effect, I have found a couple of usable HTTP server libraries, and I have implemented the functionality I need over clean HTTP. Now, I would like to use SSL to encrypt the data coming and going to my process; alas, I have not found any open source HTTP library that also supports HTTPS. Therefore, I have come to the conclusion that I will have to integrate OpenSSL into one of the HTTP libraries myself. The first question is: how difficult is it to integrate OpenSSL in "server mode" into an application? I tried taking a peek at Apache's mod_ssl, but being unfamiliar with Apache's internals, I was completely lost. Then it occurred to me that stunnel must do something similar to what I need, and indeed I could follow the code in stunnel to a point; before going any further, I wanted to first hear comments, opinions and hints from the developers. It also occurred to me that I could do what I need if stunnel offered some kind of "in process" handling of requests: instead of forwarding to a certain host:port the requests it gets, maybe stunnel itself could be configured to process the requests somehow, generate the responses and send them back; for instance, what I need to do is basically query a MySQL DB and send some records back. I am pretty sure this is not supported in stunnel today, but if it is something that anyone (besides me) sees as useful, I could volunteer to do at least part of the development. Alternatively, please feel free to educate me on why this is a moronic idea... In any case, thanks for a great product and best regards, -- Gonzalo Diethelm gonzalo.diethelm(a)aditiva.com

1 0

Connection problems and TCP frame checksum errors
by Tommi Nieminen 23 Oct '06

23 Oct '06

I have the following kind of test environment: SSL clients call a public ip address from which the calls are forwarded to a linux server with Stunnel. The linux server is in a private network. Stunnel decrypts the data and sends it forward. I have been testing this with a browser, monitoring the traffic on the server to see that Stunnel forwards the calls. Some strange things happen there that I can't explain. First of all: sometimes the calls go through the server as expected, sometimes the server doesn't respond in any way to the client. If I have two terminal windows open, one with tcpdump and another with tail -f stunnel.log - nothing comes into the log in spite of the incoming connections attempts. Then on other occasions when the calls come to the server, it forwards them beautifully to the address and port set in the configuration file. Does anyone have any clue, what this could be due to? I haven't been able to explain why it sometimes works and sometimes doesn't. Another thing that bothers me is, that sometimes there are TCP frames with incorrect checksum. I've monitored with Ethereal and tcpdump. Both show incorrect frames, and they are always from the stunnel-end of the connection. What could be the cause of those broken frames? Tommi Nieminen -------------------------------------------------------- My stunnel.conf looks like this: (any constructive criticism would be welcome :-)) CAfile = /home/tommi/cert/7/demoCA/cacert.pem cert = /home/tommi/cert/7/newcert.pem key = /home/tommi/cert/7/newkey.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 output = /var/log/stunnel/stunnel.log pid = /var/run/stunnel/stunnel.pid debug = 7 client = no [https] accept = 443 connect = 192.168.10.17:5010 TIMEOUTclose = 0 -------------------------------------------------------- A succesful connection from stunnel.log: 2006.10.09 18:01:43 LOG7[11889:3083744960]: https accepted FD=7 from 131.177.254.92:2689 2006.10.09 18:01:43 LOG7[11889:3083742128]: https started 2006.10.09 18:01:43 LOG7[11889:3083742128]: FD 7 in non-blocking mode 2006.10.09 18:01:43 LOG7[11889:3083742128]: TCP_NODELAY option set on local socket 2006.10.09 18:01:43 LOG5[11889:3083742128]: https connected from 131.177.254.92:2689 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): before/accept initialization 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 read client hello A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 write server hello A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 write certificate A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 write server done A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 flush data 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 read client key exchange A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 read finished A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 write change cipher spec A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 write finished A 2006.10.09 18:01:43 LOG7[11889:3083742128]: SSL state (accept): SSLv3 flush data 2006.10.09 18:01:43 LOG7[11889:3083742128]: 2 items in the session cache 2006.10.09 18:01:43 LOG7[11889:3083742128]: 0 client connects (SSL_connect()) 2006.10.09 18:01:43 LOG7[11889:3083742128]: 0 client connects that finished 2006.10.09 18:01:43 LOG7[11889:3083742128]: 0 client renegotiations requested 2006.10.09 18:01:43 LOG7[11889:3083742128]: 8 server connects (SSL_accept()) 2006.10.09 18:01:43 LOG7[11889:3083742128]: 7 server connects that finished 2006.10.09 18:01:43 LOG7[11889:3083742128]: 0 server renegotiations requested 2006.10.09 18:01:43 LOG7[11889:3083742128]: 4 session cache hits 2006.10.09 18:01:43 LOG7[11889:3083742128]: 1 session cache misses 2006.10.09 18:01:43 LOG7[11889:3083742128]: 1 session cache timeouts 2006.10.09 18:01:43 LOG6[11889:3083742128]: SSL accepted: new session negotiated 2006.10.09 18:01:43 LOG6[11889:3083742128]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2006.10.09 18:01:43 LOG7[11889:3083742128]: FD 8 in non-blocking mode 2006.10.09 18:01:43 LOG7[11889:3083742128]: https connecting 192.168.10.17:5010 2006.10.09 18:01:43 LOG7[11889:3083742128]: connect_wait: waiting 10 seconds 2006.10.09 18:01:43 LOG7[11889:3083742128]: connect_wait: connected 2006.10.09 18:01:43 LOG7[11889:3083742128]: Remote FD=8 initialized 2006.10.09 18:01:43 LOG7[11889:3083742128]: TCP_NODELAY option set on remote socket 2006.10.09 18:02:45 LOG7[11889:3083742128]: Socket closed on read 2006.10.09 18:02:45 LOG7[11889:3083742128]: SSL write shutdown 2006.10.09 18:02:45 LOG7[11889:3083742128]: SSL alert (write): warning: close notify 2006.10.09 18:02:45 LOG7[11889:3083742128]: SSL_shutdown retrying 2006.10.09 18:02:45 LOG7[11889:3083742128]: SSL doesn't need to read or write 2006.10.09 18:02:45 LOG6[11889:3083742128]: s_poll_wait timeout: connection close 2006.10.09 18:02:45 LOG5[11889:3083742128]: Connection closed: 0 bytes sent to SSL, 405 bytes sent to socket 2006.10.09 18:02:45 LOG7[11889:3083742128]: https finished (0 left) (and the failed connections leave also no mark in the log, but tcpdump sees the attempts on the server) -------------------------------------------------------- A sample of tcpdump's output with incorrect checksum: 18:02:45.150656 IP (tos 0x0, ttl 64, id 11218, offset 0, flags [DF], proto: TCP (6), length: 77) 192.168.20.18.https > 131.177.254.92.2689: P, cksum 0x5708 (incorrect (-> 0xf1bf), 1035:1072(37) ack 756 win 7504

2 6

Thank you very much for all your donations
by Michal Trojnara 21 Oct '06

21 Oct '06

Dear Users, I want you to know how much grateful I am for all your donations. Thank you very much. Some day stunnel may be full-time job. 8-) Even now sponsored features make a substantial addition to my budget. BTW: I have updated currency to USD. I hope it's more convenient. http://stunnel.mirt.net/ Best regards, Mike

1 0

error 1703, service already exists.
by Joop Blokker 20 Oct '06

20 Oct '06

Hello, I'm using sTunnel v4.18 under Windows XP as a client. I start the serv= ice with sTunnel -install -quiet If, for any reason, the same command is given again then the error mes= sage "Create service; error 1703; the specified service already exists= " pops up. In that case the -quiet parameter does not work. I do not w= ant to see that error message; if the service is running then it's oka= y. Q:. How can I suppress that error message? If that is not an option, h= ow can I detect that the sTunnel service is installed already? I'm programming in PowerBASIC - I know how to detect sTunnel once it h= as started with -start -quiet Thanks in advance for any idea! Joop. +++ Too far East is West. - Proverb (English) +++

2 1

stunnel client without any configuration
by Thomas Stegbauer 18 Oct '06

18 Oct '06

hi ml, i searched the list about an idea, but didn't find the complete answer, so i would ask: i am thinking about a https website (with logon), where you can download a completly preconfigured package (java-applet?) which checks HTTP_PROXY on unix and the msie registry settings on windows and connect a local port to a remote running stunnel, listening on port 443 (the stunnel ist running on a different ip). currently there are imho two points, which need solved: 1.) there is no proxy support, without a patch 2.) it is currently not possible to download a preconfigured package are there some thoughts? greetings thomas -- # Thomas Stegbauer # https://keyserver1.pgp.com/vkd/DownloadKey.event?keyid=0x9A3F1866FC68E91D # Key fingerprint = 5A2D FEDC 8A50 F1BB 25FB 967B 9A3F 1866 FC68 E91D

2 1

Infinite client timeout
by Dario Mariani 18 Oct '06

18 Oct '06

Hi all, i'm a new user :) I'm deploying stunnel into a big enterprise, so i have met a lot of interesting details about Stunnel :) I have a little problem now: a Stunnel channel connecting BEA Weblogic -> Oracle listener. BEA has the BIG problem of _completely locking_ when the connection goes down: when the connection comes up again, bea doesn't work. This is not an issue, because there's a keepalive feature that can be activated in BEA. In a case, we _cannot_ activate the keepalive, so we must try to keep the BEA -> stunnel client conection open indefinitely. I think this must apply to the other parts of the connection, but i'm not sure (if the bea -> client connection remains active, the client then can renegotiate the connection without bea noticing it? and the server -> oracle connection?) Ok, i'm a little confused here :) Can you help me with this issue? Bye, dario.

1 0

New feature - PayPal donations
by Michal Trojnara 16 Oct '06

16 Oct '06

Dear Users, Since PayPal finally decided to provide full support for users in Poland I've added a donation button on the web page. http://stunnel.mirt.net/ I really appreciate each donation. 8-) Best regards, Mike

1 0

"Peer suddenly disconnected" after upgrade to 4.18
by Asarian 13 Oct '06

13 Oct '06

Hello, I'm a long time user of stunnel. Yesterday I finally upgraded to stunnel 4.18. Can't get it to work anymore, though. :( Here is the relevant part of my config: ----------------------- cert = /etc/stunnel.pem key = /etc/stunnel.pem ciphers = ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH sslVersion = SSLv2 setuid = nobody setgid = nobody socket = l:TCP_NODELAY=1 debug = 5 pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes session = 300 seconds verify = none [pop3s] accept = 995 exec = /usr/local/libexec/inet-qpopper execargs = inet-qpopper -s transparent = yes [imaps] accept = 993 exec = /usr/local/libexec/imapd execargs = imapd transparent = yes ----------------------- With the exception of a few keyword changes, this is the config I've always used. But I always get these errors now: Oct 14 00:57:40 asarian-host stunnel: LOG5[49682:134621184]: pop3s connected from 192.168.79.4:2576 Oct 14 00:57:40 asarian-host stunnel: LOG3[49682:134621184]: SSL_accept: Peer suddenly disconnected Oct 14 00:57:40 asarian-host stunnel: LOG3[49682:134621184]: SSL_accept: Peer suddenly disconnected Oct 14 00:57:40 asarian-host stunnel: LOG5[49682:134621184]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket Oct 14 00:57:40 asarian-host stunnel: LOG5[49682:134621184]: pop3s connected from 192.168.1.4:2579 Oct 14 00:57:40 asarian-host stunnel: LOG3[49682:134621184]: SSL_accept: Peer suddenly disconnected Oct 14 00:57:40 asarian-host stunnel: LOG5[49682:134621184]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket The cert and key are good (I use em for Apache, too). I also tried SSLv3, but got this error: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number But I like to get it working with SSLv2 first; then I'll worry about the other thing later. :) I hope someone can tell me what I'm doing wrong. Thanks, - Mark

1 0

SegFault with stunnel
by Beyerle, Christian 12 Oct '06

12 Oct '06

Hello Everyone, I try to encrypt a Mysql-Connection between two host which run Suse Linux 10.1. On the Server runs a mysql database, on the client runs barnyard (a plugin for snort) which should write into the mysql database. I installed stunnel 4.14 on x86_64-suse-linux-gnu UCONTEXT+POLL+IPv4+LIBWRAP with OpenSSL 0.9.8a 11 Oct 2005 on both servers. The Configuration file on the Server (mysql) looks like: client = no debug = 7777777 output = /var/log/stunnel.log [mysqls] accept = 10439 connect = 127.0.0.1:3306 Stunnel seems to run well: lsof -i -n | grep stunnel stunnel 25330 stunnel 6u IPv4 371490 TCP *:10439 (LISTEN) On the client: [mysqls] client = yes accept = 127.0.0.1:3306 connect = 172.16.1.80:10439 Stunnel seems to run as well as on the server: stunnel 16634 stunnel 6u IPv4 22487 TCP 127.0.0.1:mysql (LISTEN) If i start barnyard that should connect to port 3306, barnyard cannot open the port and quits. I looked in my syslog and found the following entry: Oct 12 14:10:28 CLIENT kernel: stunnel[10991]: segfault at 0000000055697fb0 rip 000055555555b793 rsp 00005555556b0520 error 4 Oct 12 14:10:28 CLIENT barnyard[10997]: FATAL ERROR: Failed to connect to database snort:XXXXXXXX@127.0.0.1/sensors: Lost connection to MySQL server during query Oct 12 14:10:28 CLIENT barnyard[10997]: Exiting I find no log of stunnel which help me to understand the reason of the crash. After this stunnel not too seem runnign anymore on the port: lsof -i -n | grep stunnel (no output) Does anybody have an idea??? Thank you for the help, -- Chris

1 0

[stunnel-users]Plan for new authorisation method in Stunnel
by Thomas Thiele 11 Oct '06

11 Oct '06

Hello Stunnel Users, I am planning to develop a new authorisation method for Stunnel which I need for work. This method will be an addition to the existing methods for checking certificates. The idea is to use the subject names and the alternative names of the certificates to allow or drop connections. The subject and alternative names of the machines/clients that are allowed to connect to the server will be written into the Stunnel config. While checking the certificates, the subject and alternative names from the Stunnel config will be compared with the subject and alternative names in the certirficate from the connection request. If one of the names from the Stunnel config matches with the names from the certificate then the connection will be allowed. This is the basic idea of my project. Is anyone already working on something like that or do you have any ideas or suggestions for me? Best Regards, Thomas Thiele -- GMX DSL-Flatrate 0,- Euro* - Überall, wo DSL verfügbar ist! NEU: Jetzt bis zu 16.000 kBit/s! http://www.gmx.net/de/go/dsl

2 1

libstunnel.so
by Andrew Schulman 05 Oct '06

05 Oct '06

The Debian stunnel (actually stunnel4) package includes /usr/lib/libstunnel.so. I have two questions about this file: (1) What is its purpose? ldd shows that /usr/bin/stunnel doesn't depend on it. So is this the shared library referred to in stunnel(1), under the 'transparent' option? The man page says that to use 'transparent' one has to LD_PRELOAD env.so, but I don't find any env.so. I see that env.c is used in building libstunnel.a, so I'm guessing that the man page meant to say libstunnel.so instead of env.so. (2) How does one build it? configure includes a --with-shared-libs option, but even when that's enabled I don't get a libstunnel.so when I build. And I can't find any make targets for any .so files. Yet Debian includes this file. Thanks, Andrew.

1 0

Configure can't find openssl in Ubuntu
by Tommi Nieminen 04 Oct '06

04 Oct '06

Hello, I have an Ubuntu 6.06.1 (Dapper) where I'm trying to install Stunnel. First I tried to install Stunnel using Ubuntu's package manager (apt-get install stunnel4). The installation went very smoothly but the fact that stunnel didn't recognize the -V switch left me with an uneasy feeling that something else might be lacking, too. The Ubuntu package in question contains Stunnel 4.14. Stunnel 3.26, installed from another package, does recognize the -V switch. So then I tried several times installing stunnel from source. A few obstacles I managed to overcome, but now that the configure script stops telling that it can't find SSL directory checking for SSL directory... Not found Couldn't find your SSL library installation dir Use --with-ssl option to fix this problem I'm out of resources. The script seems to check the existence of ssl.h file: checkssldir() { : if test -f "$1/include/openssl/ssl.h" Despite the fact that I have OpenSSL 0.9.8a on my machine, I don't have ssl.h file anywhere, I checked that with find. I tried installing Linux headers, but that didn't help (well I didn't expect it to help, but I couldn't think of anything). Is there some package I should get, that doesn't come with the openssl package or how should I solve this problem? Any ideas? Another problem that I had when I was experimenting with Stunnel 3.26 was the fact, that I couldn't start it up. It kept asking for the -r or -l switch. What I want to do with Stunnel is to decrypt the traffic coming in on one interface and then forward it to another machine through another interface. I tried several different configuration files, this is one of them (without indentations): cert = stunnel.pem key = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify = 1 debug = 7 output = stunnel.log client = no [https] accept = 443 connect = 192.168.10.17:5010 TIMEOUTclose = 0 I didn't get any debug information and -f switch didn't give anything more. I tried the Windows version (4.18) on another pc and it seemed to do exactly what I wanted. (the config file may have been slightly different, at least no debug was set. I really would like to get this working on a Linux box, too. Tommi Nieminen

3 3

Convert to SSL
by Bob 04 Oct '06

04 Oct '06

Hello all, I have been looking online at the examples but can't seem to quite figure out how to do this. We are currently using stunnel to receive SSL message and redirect them as regular messages but now I need to go the other way first. Is it possible to setup stunnel to receive an non-SSL messages and redirect it as an SSL message? and can this be done in the current config file or do I have to run 2 stunnel daemons? Also, the new one has to validate certificates. -- _______________________________________________________________________ Thanks, Bob (bobif(a)adelphia.net) YahooIM: bobifx AOLIM: bobifmd ICQ: 111083556

1 0

"SSL3_GET_RECORD:wrong version number" error
by James Brown 04 Oct '06

04 Oct '06

I am having problems connecting to stunnel and was hoping someone could help me. When starting stunnel and then trying to send an SSL-encrypted email through it I get: $ sudo /usr/local/sbin/stunnel /sw/etc/stunnel/stunnel.conf -D 465 -r 25 2006.10.04 11:03:28 LOG7[29230:2684415368]: Snagged 64 random bytes from /Users/jlbrown/.rnd 2006.10.04 11:03:28 LOG7[29230:2684415368]: Wrote 1024 new random bytes to /Users/jlbrown/.rnd 2006.10.04 11:03:28 LOG7[29230:2684415368]: RAND_status claims sufficient entropy for the PRNG 2006.10.04 11:03:28 LOG7[29230:2684415368]: PRNG seeded successfully 2006.10.04 11:03:28 LOG7[29230:2684415368]: Certificate: /Users/ jlbrown/%1.pem 2006.10.04 11:03:28 LOG7[29230:2684415368]: Certificate loaded 2006.10.04 11:03:28 LOG7[29230:2684415368]: Key file: /Users/jlbrown/% 1.pem 2006.10.04 11:03:28 LOG7[29230:2684415368]: Private key loaded 2006.10.04 11:03:28 LOG7[29230:2684415368]: SSL context initialized for service ssmtp 2006.10.04 11:03:28 LOG5[29230:2684415368]: stunnel 4.18 on powerpc- apple-darwin8.8.0 with OpenSSL 0.9.7i 14 Oct 2005 2006.10.04 11:03:28 LOG5[29230:2684415368]: Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv4 Auth:LIBWRAP 2006.10.04 11:03:28 LOG6[29230:2684415368]: file ulimit = 256 (can be changed with 'ulimit -n') 2006.10.04 11:03:28 LOG6[29230:2684415368]: FD_SETSIZE = 1024 (some systems allow to increase this value) 2006.10.04 11:03:28 LOG5[29230:2684415368]: 125 clients allowed 2006.10.04 11:03:28 LOG7[29230:2684415368]: FD 6 in non-blocking mode 2006.10.04 11:03:28 LOG7[29230:2684415368]: FD 7 in non-blocking mode 2006.10.04 11:03:28 LOG7[29230:2684415368]: FD 8 in non-blocking mode 2006.10.04 11:03:28 LOG7[29230:2684415368]: SO_REUSEADDR option set on accept socket 2006.10.04 11:03:28 LOG7[29230:2684415368]: ssmtp bound to 0.0.0.0:465 James-Browns-Computer-2:~/stunnel-4.18 jlbrown$ 2006.10.04 11:03:28 LOG7[29231:2684415368]: Created pid file /usr/local/var/run/stunnel/ stunnel.pid 2006.10.04 11:08:08 LOG7[29231:2684415368]: ssmtp accepted FD=9 from 127.0.0.1:64235 2006.10.04 11:08:08 LOG7[29231:25188864]: ssmtp started 2006.10.04 11:08:08 LOG7[29231:25188864]: FD 9 in non-blocking mode 2006.10.04 11:08:08 LOG7[29231:25188864]: TCP_NODELAY option set on local socket 2006.10.04 11:08:08 LOG7[29231:25188864]: FD 10 in non-blocking mode 2006.10.04 11:08:08 LOG7[29231:25188864]: FD 11 in non-blocking mode 2006.10.04 11:08:08 LOG7[29231:25188864]: Connection from 127.0.0.1:64235 permitted by libwrap 2006.10.04 11:08:08 LOG5[29231:25188864]: ssmtp connected from 127.0.0.1:64235 2006.10.04 11:08:08 LOG7[29231:2684415368]: Cleaning up the signal pipe 2006.10.04 11:08:08 LOG7[29231:25188864]: FD 10 in non-blocking mode 2006.10.04 11:08:08 LOG7[29231:25188864]: ssmtp connecting 127.0.0.1:25 2006.10.04 11:08:08 LOG7[29231:25188864]: connect_wait: waiting 10 seconds 2006.10.04 11:08:08 LOG6[29231:2684415368]: Child process 29421 finished with code 0 2006.10.04 11:08:08 LOG7[29231:25188864]: connect_wait: connected 2006.10.04 11:08:08 LOG7[29231:25188864]: Remote FD=10 initialized 2006.10.04 11:08:08 LOG7[29231:25188864]: TCP_NODELAY option set on remote socket 2006.10.04 11:08:08 LOG7[29231:25188864]: SSL state (connect): before/ connect initialization 2006.10.04 11:08:08 LOG7[29231:25188864]: SSL state (connect): SSLv3 write client hello A 2006.10.04 11:08:08 LOG7[29231:25188864]: SSL alert (write): fatal: handshake failure 2006.10.04 11:08:08 LOG3[29231:25188864]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2006.10.04 11:08:08 LOG5[29231:25188864]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.10.04 11:08:08 LOG7[29231:25188864]: ssmtp finished (0 left) Any suggestions as to what is causing this and how I can fix it? I got the same thing on another machine, with stunnel 4.04 and OpenSSL 0.9.7d. My stunnel.conf file is: cert = /Users/jlbrown/%1.pem key = /Users/jlbrown/%1.pem debug=7 output=/dev/stdout ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Service-level configuration [ssmtp] client = yes accept = 465 connect = 192.168.1.31:25 Thanks, James.

2 1

Thanks
by Eric S. Eberhard 03 Oct '06

03 Oct '06

For the help ... I believe I got it. Was I got that debug bug fixed I could tell what was going on. In the end I just stopped fighting it and downloaded prngd and ran it for a while. Interestingly, once I did this, it continues to work fine w/out prngd up and running. It did something I don't understand to my random file (apparently the old one was not good enough) and now it works!##$ Don't understand it, but it works! I still have some other application problem but I appear to get responses now. Thanks, Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0

Re: [stunnel-users] Help please - debug and random file
by Eric S. Eberhard 02 Oct '06

02 Oct '06

Mike, Ah -- you are an expert! Amazing product in that I last download this in 2000 and have used it without incident ever since. Too bad I am forced to upgrade. I have hunted down the problem some more -- it has to do with the randomness. Using dbx I have found that it is blocking on a socked read for DEVRANDOM_EGD ... I did not specifically set up any sockets for randomness anyplace. Or set any options. I don't really want a socket, I was perfectly happy with my little 1024 byte .rnd file. If I copy a file (at random :-) ) and specify that it use that file for randomness, it reads it and sets it to zero bytes (unless I tell it not to overwrite). It then goes to read the socket and hangs. I suspect this is more an openssl problem than stunnel unless you can think of a way to 1) make it not wipe out my random file 2) make it not try and access a socket I hope you put my little fix in to s_log. Thanks, Eric At 01:51 PM 10/2/2006, you wrote: >On Monday 02 October 2006 21:19, you wrote: > > Are you an openssl/stunnel expert? > >I wrote stunnel. I could say I'm an expert (who an expert is otherwise?). > > > If I gave you access to my rs6000 > > and paid you, could you get this to work for me? Since I only need > > to compil this every 5-10 years, it makes little sense for me to > > invest a lot of time learning it! > >Good idea. > >Best regards, > Mike > This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0

Help please - debug and random file
by Eric S. Eberhard 02 Oct '06

02 Oct '06

Hello everyone. I have not been on the list for a long time. I last compiled openssl and stunnel in 2000 or so and have been using the same code ever since. I use it very simply in client mode ... I have an application to authorize credit cards and it connect to stunnel in inetd mode (with -c in the command line). visanet is now requiring version 2 SSL so I have to change so I got all the new stuff and compiled it up and made a .conf file. I have two problems (for now :-) ): 1) No matter what I do it seems that at least some debug is coming back through the socket, and no debug is going to my debug file 2) The debug I am getting is very strange -- the first time it says "Snagged 64 from bytes from stunnel.rnd" The second time it says "Unable to retrieve any random data from stunnel.rnd" When I examine the file it has a current date and zero bytes. If I copy back my old (2000) stunnel.rnd it always reads once, and then writes it back out with zero bytes. I am AIX 4.3.3 and I compiled with xlc and the only option I used that was not default was to not link in the wrappers. I did get a ton of warnings that the "-pthreaded" option was not valid ... but it executes and responds so I am not sure that matters? Or should I do something (what?) about that? My configuration files for the service (visanet) is: output = /tmp/stunnel.log debug = 7 RNDfile = /visanet/ssl/stunnel.rnd [visanet] client = yes connect = ssllab.pgs.wcom.net:443 sslVersion = SSLv2 protocol = smtp cert = /viasanet/ssl/stunnel.pem The rnd file and cert file are from 2000 (old old old!). I would have expected a file /tmp/stunnel.log -- the file is not even created! The old inetd line was: (blah blah) stunnel -r ssllab.pgs.wcom.net:443 -c -R /visanet/sslold/stunnel.rnd What stupid thing am I doing wrong? Does anyone else have experience using stunnel with visanet and can they give me any pointers? Thanks! Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

2 3

One bug solved/fixed -- bug in log.c or perhaps options.c
by Eric S. Eberhard 02 Oct '06

02 Oct '06

Because I am using inetd mode, any unintended output by stunnel to stdout is BAD as this is accepted as input through inetd to my calling program. The problem with stunnel is that in main it does main_initialize which has the final function "log_open" However, somewhere in "parse_config" a call is made to "s_log" (with the text "Snagged 64 bytes from ..." and since this is before the log_open, the output ends up on stdout rather than being logged. Rather than try and hunt down the function that outputs the premature error message, I modified s_log to open the log files itself if not already open. I fixed it as follows (suggest you put in to the release?): void s_log(int level, const char *format, ...) { va_list arglist; char text[STRLEN], timestamped[STRLEN]; time_t gmt; struct tm *timeptr; #if defined(HAVE_LOCALTIME_R) && defined(_REENTRANT) struct tm timestruct; #endif if(level>options.debug_level) return; va_start(arglist, format); #ifdef HAVE_VSNPRINTF vsnprintf(text, STRLEN, format, arglist); #else vsprintf(text, format, arglist); #endif va_end(arglist); #if !defined (USE_WIN32) && !defined (__vms) /******************** NEW CODE, NEXT 2 LINES *******/ if(!outfile && options.output_file) /* 'output' option specified, not open */ log_open(); if(!outfile && options.option.syslog) { syslog(level, "LOG%d[%lu:%lu]: %s", So now I don't get the "Snagged" message back on stdout ... but it still does not work for me (yet :-) ) Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0

Setting up TLS for SMTP
by James Brown 01 Oct '06

01 Oct '06

I am trying to set up stunnel so that it accepts SSL encrypted traffic from the internet on port 2525 and sends it to my mail server on port 25. To create the certificate, I used: sudo openssl req -new -outform PEM -out smtpd.cert \ -newkey rsa:2048 -nodes -keyout smtpd.key -keyform PEM \ -days 365 -x509 My stunnel.conf is: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment ;cert = stunnel.pem cert = /smtpd.cert ;key = stunnel.pem key = /smtpd.key ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting ;debug = 7 ;output = stunnel.log ; Use it for client mode ;client = yes ; Service-level configuration ;[pop3s] ;accept = 995 ;connect = 110 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini I am trying it in standalone mode. Using Stunnel 4.04. OpenSSL 0.9.7i 14 Oct 2005 Output of gcc -v is: Using built-in specs. Target: powerpc-apple-darwin8 Configured with: /private/var/tmp/gcc/gcc-5341.obj~1/src/configure -- disable-checking -enable-werror --prefix=/usr --mandir=/share/man -- enable-languages=c,objc,c++,obj-c++ --program-transform-name=/^[cg] [^.-]*$/s/$/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with- slibdir=/usr/lib --build=powerpc-apple-darwin8 --host=powerpc-apple- darwin8 --target=powerpc-apple-darwin8 Thread model: posix gcc version 4.0.1 (Apple Computer, Inc. build 5341) Whenever I try to start Stunnel, I get a message saying that there is no such file. Eg: $ stunnel -p /smtpd.cert -d 2525 -r 25 2006.10.01 00:36:46 LOG3[638:2684415368]: -p: No such file or directory (2) Syntax: stunnel [filename] | -help | -version | -sockets filename - use specified config file instead of /sw/etc/ stunnel/stunnel.conf -help - get config file help -version - display version and defaults -sockets - display default socket options I am using Mac OS X 10.4.8, Stunnel was built using Fink. Does anybody have any suggestions as to what I am doing wrong? Thanks, James.

1 0

stunnel on osX
by fmgre-dell＠yahoo.fr 30 Sep '06

30 Sep '06

>From: Michal Trojnara <Michal.Trojnara(a)mobi-com.net> >Subject: Re: [stunnel-users] Tr: failure notice >To: stunnel-users(a)mirt.net >Message-ID: <200609292118.57291.Michal.Trojnara(a)mobi-com.net> >Content-Type: text/plain; charset="utf-8" >On Friday 29 September 2006 16:11, fmgre-dell(a)yahoo.fr wrote: >> We have been using stunnel for 2 years now. >> We need to renew our keys, and we usually proceed to a >> software upgrade at the same time. >> Â >> - I have noticed changes in stunnel-client ( 4.16 ) >> running on OSX : now, stunnel asks for the key >> password for each service it is launching. > >Just password from your private key. 8-) > Hello, What i mean is that we have 8 different services running. they are all locked with the same key. We distribute the private key to other non-computer persons, who don t know how to remove a password from a key ( and we 'd like to keep the key locked ) With the former version of stunnel, we could unlock the 8 services with typing the password only once With the latest version, we need to type in the keyword once for every service ( i.e. 8 times !!! ) Is there any way to 'ease' the use of the latest version while keeping the key passworded ? bon week end fred ___________________________________________________________________________ Découvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet ! Yahoo! Questions/Réponses pour partager vos connaissances, vos opinions et vos expériences. http://fr.answers.yahoo.com

2 1

Help please - debug and random file
by Eric S. Eberhard 29 Sep '06

29 Sep '06

Hello everyone. I have not been on the list for a long time. I last compiled openssl and stunnel in 2000 or so and have been using the same code ever since. I use it very simply in client mode ... I have an application to authorize credit cards and it connect to stunnel in inetd mode (with -c in the command line). visanet is now requiring version 2 SSL so I have to change so I got all the new stuff and compiled it up and made a .conf file. I have two problems (for now :-) ): 1) No matter what I do it seems that at least some debug is coming back through the socket, and no debug is going to my debug file 2) The debug I am getting is very strange -- the first time it says "Snagged 64 from bytes from stunnel.rnd" The second time it says "Unable to retrieve any random data from stunnel.rnd" When I examine the file it has a current date and zero bytes. If I copy back my old (2000) stunnel.rnd it always reads once, and then writes it back out with zero bytes. I am AIX 4.3.3 and I compiled with xlc and the only option I used that was not default was to not link in the wrappers. I did get a ton of warnings that the "-pthreaded" option was not valid ... but it executes and responds so I am not sure that matters? Or should I do something (what?) about that? My configuration files for the service (visanet) is: output = /tmp/stunnel.log debug = 7 RNDfile = /visanet/ssl/stunnel.rnd [visanet] client = yes connect = ssllab.pgs.wcom.net:443 sslVersion = SSLv2 protocol = smtp cert = /viasanet/ssl/stunnel.pem The rnd file and cert file are from 2000 (old old old!). I would have expected a file /tmp/stunnel.log -- the file is not even created! The old inetd line was: (blah blah) stunnel -r ssllab.pgs.wcom.net:443 -c -R /visanet/sslold/stunnel.rnd What stupid thing am I doing wrong? Does anyone else have experience using stunnel with visanet and can they give me any pointers? Thanks! Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0

Tr: failure notice
by fmgre-dell＠yahoo.fr 29 Sep '06

29 Sep '06

Hello, We have been using stunnel for 2 years now. We need to renew our keys, and we usually proceed to a software upgrade at the same time. - I have noticed changes in stunnel-client ( 4.16 ) running on OSX : now, stunnel asks for the key password for each service it is launching. - a collegue is running stunnel ( client ) on windows and told me that the 4.15 and 4.16 version keeps on crashing on windows. Anybody with the same symptoms ( and possiby a workaround ? ) :-) ( we use keys which are protected by a password, we launch the stunnel ( client ) manually and type in the password for the service to start ) Sincerely, Fred ___________________________________________________________________________ Découvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet ! Yahoo! Questions/Réponses pour partager vos connaissances, vos opinions et vos expériences. http://fr.answers.yahoo.com

2 1

create_client failed
by James 29 Sep '06

29 Sep '06

I am running Debian 3.1 (stable) with stunnel 3.26 (Debian package) to wrap my qmail pop3 daemon. Stunnel works properly for a good amount of time, but at a point (I am unable to find any specific influencing factors) it begins to fail with the error, "Connection reject: create_client failed" (see below for more info). To fix the error I have to kill and restart stunnel. I have adjusted the timeouts for both stunnel and the pop3 daemon, but nothing appears to have a lasting affect. When stunnel errors out the pop3 daemon is still available and can be connected to, so it does not appear to be an issue related to stunnel not being able to talk to the pop3 daemon. Below I have some of the debugging and system information regarding the system and problem. I would be more than appreciative if anyone had some input. Thank you. # Error stunnel[2500]: pop3 accepted FD=9 ###.###.###.### stunnel[2500]: Connection rejected: create_client failed # strace -p select(7, [4 6], NULL, NULL, NULL) = 1 (in [6]) fcntl64(6, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(6, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(6, {sa_family=AF_INET, sin_port=htons(63759), sin_addr=inet_addr("###.###.###.###")}, [16]) = 9 fcntl64(6, F_SETFL, O_RDWR) = 0 fcntl64(9, F_SETFD, FD_CLOEXEC) = 0 rt_sigprocmask(SIG_BLOCK, [HUP INT QUIT TERM CHLD], [], 8) = 0 mmap2(NULL, 8388608, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = -1 ENOMEM (Cannot allocate memory) rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 close(9) = 0 time([1159535901]) = 1159535901 getpid() = 21864 rt_sigaction(SIGPIPE, {0x40253a70, [], 0}, {SIG_IGN}, 8) = 0 send(3, "<27>Sep 29 09:18:21 stunnel[2186"..., 77, 0) = 77 rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0 close(9) = -1 EBADF (Bad file descriptor) # uname -a 2.6.8-3-686-smp #1 SMP Thu Sep 7 04:39:15 UTC 2006 i686 GNU/Linux # libc version GNU C Library stable release version 2.3.2 # Command Running /usr/sbin/stunnel -d pop3s -r pop3 -p /etc/ssl/certs/pop3d.pem -R /dev/urandom -s nobody -g root # stunnel -V stunnel 3.26 on i386-pc-linux-gnu PTHREAD+LIBWRAP with OpenSSL 0.9.7e 25 Oct 2004 Default behaviour: run in inetd mode (unless -d used) run in background (unless -f used) run in ssl server mode (unless -c used) Compile time defaults: -v level no verify -a directory /etc/ssl/certs -A file (none) -S sources 3 -t timeout 300 seconds -B bytes 64 -D level 5 -P pid dir /var/run/stunnel/ -p pemfile in server mode: /etc/ssl/certs/stunnel.pem in client mode: none Socket option defaults: Option Accept Local Remote OS default SO_DEBUG -- -- -- 0 SO_DONTROUTE -- -- -- 0 SO_KEEPALIVE -- -- -- 0 SO_LINGER -- -- -- 0:0 SO_OOBINLINE -- -- -- 0 SO_RCVBUF -- -- -- 87380 SO_SNDBUF -- -- -- 16384 SO_RCVLOWAT -- -- -- 1 SO_SNDLOWAT -- -- -- 1 SO_RCVTIMEO -- -- -- 0:0 SO_SNDTIMEO -- -- -- 0:0 SO_REUSEADDR 1 -- -- 0 SO_BINDTODEVICE -- -- -- -- IP_TOS -- -- -- 0 IP_TTL -- -- -- 64 TCP_NODELAY -- -- -- 0

1 0

SSL and keep alive
by Alex Turner 29 Sep '06

29 Sep '06

All, I am load testing stunnel as a front end to a web server. The problem I have is that the connection is dropping even though JMeter is set to keep-alive on the http sampler. I was wondering if anyone knew if this was a JMeter issue – IE it does not do http1.1 properly with SSL or should I dig deeper? The stunnel log just shows the socket being closed down at the end of each request. Now – as stunnel should not care what data is going over ssl, then there must be something from JMeter that is triggering it to drop the socket. My thinking is that this is either an SSL session end or an actual FIN. In the absence of any feedback – I think I will try using stunnel in both client and server modes and, as I already know JMeter is OK at keep-alive non https – I should thus find out where the issue lays. Thanks for any info AJ PS – I am working on XP both ends with JMeter 2.2 and the latest stunnel. PPS – Naturally, once I have this figured I will post the method and results to nerds-central Alexander J Turner Ph.D. HYPERLINK "http://www.deployview.com"www.deployview.com HYPERLINK "http://www.nerds-central.blogspot.com"www.nerds-central.blogspot.com HYPERLINK "http://www.project-network.com"www.project-network.com -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.9/457 - Release Date: 26/09/2006

2 3

Zombies in 4.17?
by Pete Resnick 28 Sep '06

28 Sep '06

I'm running 4.17 on a Mac Mini (Intel) running MacOSX 10.4.7 and I'm seeing a slew of zombies. Anything I can do to track down what the problem is? pr -- Pete Resnick <http://www.episteme-software.com/> All connections to the world are tenuous at best

2 2

stunnel 4.18 released
by Michal Trojnara 26 Sep '06

26 Sep '06

Version 4.18, 2006.09.26, urgency: MEDIUM: * Bugfixes - GPF on entering private key pass phrase on Win32 fixed. - Updated Win32 OpenSSL DLLs. - Minor configure script update. Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ sha1sum for stunnel-4.18.tar.gz: 3ed3eaefae91d80fcfcbb29dd285d0f773756397 Best regards, Mike

1 0

Windows OpenSSL DLL Version
by algol sigfrid 26 Sep '06

26 Sep '06

2 1

seg fault stunnel 4-14 on SLES10
by Jon Howse 22 Sep '06

22 Sep '06

Hi, I am getting a seg fault with stunnel on an installation of SLES10. This is the first SLES10 server I have set up after having set up many SLES9 servers (approx twelve) which all communicate through stunnel to a central syslog server. The version of stunnel we are using on SLES9 is: stunnel-4.05-20.1. The other machines are a mix of 32bit and 64bit Xeons. The seg fault seems to happen when syslog starts to talk through stunnel. The program is a binary rpm install for 64bit SLES10 and is being run in standalone mode as a client connecting to a stunnel/syslog server running SLES9. OS:- SLES10 x86_64 Packages:- Stunnel 4-14-14.2 Syslog-ng-1.6.8-20.4 Openssl-0.9.8a-18.4 uname -a: Linux server 2.6.16.21-0.15-smp #1 SMP Tue Jul 25 15:28:49 UTC 2006 x86_64 x86_64 x86_64 GNU/Linux libc version: libc.so.6 => /lib64/libc.so.6 (0x00002ae068cf2000) openssl version: OpenSSL 0.9.8a 11 Oct 2005 stunnel.conf:- # Copyright by Michal Trojnara 2002-2004 # --with changes for SuSE package # client = yes | no # client mode (remote service uses SSL) # default: no (server mode) client = yes # # chroot + user (comment out to disable) # chroot = /var/lib/stunnel/ setuid = stunnel setgid = nogroup # note about the chroot feature and the "exec" keyword to start other # services... # while the init script /etc/init.d/stunnel will copy the binaries and libraries # into the chroot jail, more files might be needed in the jail (configuration files etc.) pid = /var/run/stunnel.pid # # debugging # debug = 7 output = /var/log/stunnel.log # # Some performance tunings # # disable Nagle algorithm (a.k.a. tinygram prevention, see man 7 tcp) socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 # compression = rle # Workaround for Eudora bug #options = DONT_INSERT_EMPTY_FRAGMENTS # Authentication stuff # verify = 2 # Don't forget to c_rehash CApath; CApath is located inside chroot jail: # CApath = /certs # It's often easier to use CAfile: # CAfile = /etc/stunnel/certs.pem # Don't forget to c_rehash CRLpath; CRLpath is located inside chroot jail: # CRLpath = /crls # Alternatively you can use CRLfile: # CRLfile = /etc/stunnel/crls.pem CAfile = /etc/openldap/rootcert.pem cert = /etc/ssl/certs/thorincert.pem key = /etc/ssl/certs/thorinkey.pem verify = 2 [5140] accept = 127.0.0.1:514 connect = xxx.xxx.xxx.xxx:5140 /var/log/messages:- kernel: Kernel logging (proc) stopped. Sep 21 13:51:00 thorin kernel: Kernel log daemon terminating. Sep 21 13:51:01 thorin syslog-ng[3146]: syslog-ng version 1.6.8 going down Sep 21 13:51:01 thorin syslog-ng[3769]: syslog-ng version 1.6.8 starting Sep 21 13:51:01 thorin syslog-ng[3769]: Changing permissions on special file /dev/tty10 Sep 21 13:51:01 thorin syslog-ng[3769]: Connection broken to AF_INET(127.0.0.1:514), reopening in 60 seconds Sep 21 13:51:06 thorin kernel: klogd 1.4.1, log source = /proc/kmsg started. Sep 21 13:51:06 thorin kernel: stunnel[3739]: segfault at 000000005569a9f0 rip 000055555555b793 rsp 00005555556b2f60 error 4 var/log/stunnel.log:- stunnel 4.14 on x86_64-suse-linux-gnu UCONTEXT+POLL+IPv4+LIBWRAP with OpenSSL 0.9.8a 11 Oct 2005 2006.09.21 13:48:25 LOG7[3396:1]: RAND_status claims sufficient entropy for the PRNG 2006.09.21 13:48:25 LOG6[3396:1]: PRNG seeded successfully 2006.09.21 13:48:25 LOG7[3396:1]: Certificate: /etc/ssl/certs/thorincert.pem 2006.09.21 13:48:25 LOG7[3396:1]: Key file: /etc/ssl/certs/thorinkey.pem 2006.09.21 13:48:25 LOG7[3396:1]: Loaded verify certificates from /etc/openldap/rootcert.pem 2006.09.21 13:48:25 LOG6[3396:1]: file ulimit = 1024 (can be changed with 'ulimit -n') 2006.09.21 13:48:25 LOG6[3396:1]: poll() used - no FD_SETSIZE limit for file descriptors 2006.09.21 13:48:25 LOG5[3396:1]: 500 clients allowed 2006.09.21 13:48:25 LOG7[3396:1]: FD 4 in non-blocking mode 2006.09.21 13:48:25 LOG7[3396:1]: FD 5 in non-blocking mode 2006.09.21 13:48:25 LOG7[3396:1]: FD 6 in non-blocking mode 2006.09.21 13:48:25 LOG7[3396:1]: SO_REUSEADDR option set on accept socket 2006.09.21 13:48:25 LOG7[3396:1]: 5140 bound to 127.0.0.1:514 2006.09.21 13:48:25 LOG7[3397:1]: Created pid file /var/run/stunnel.pid 2006.09.21 13:48:25 LOG7[3397:0]: Waiting -1 second(s) for 2 file descriptor(s) 2006.09.21 13:49:20 LOG7[3397:0]: CONTEXT 1, FD=4, (IN)->() 2006.09.21 13:49:20 LOG7[3397:0]: CONTEXT 1, FD=6, (IN)->(IN) 2006.09.21 13:49:20 LOG7[3397:1]: 5140 accepted FD=7 from 127.0.0.1:7323 2006.09.21 13:49:20 LOG7[3397:1]: Creating a new context 2006.09.21 13:49:20 LOG7[3397:1]: Context 2 created 2006.09.21 13:49:20 LOG7[3397:2]: Context swap: 1 -> 2 It waits at the last entry until syslog tries to connect. And that's where the useful logging stops, after that it's a seg fault. Hope you can point me in the right direction... Jon Howse ---------------------------------------------------------------------------- St Brendan's Sixth Form College --- STAFF e-mail Please consider the environment before printing this email. This e-mail is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of St Brendan's Sixth Form College. If you are not the intended recipient, be advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please contact the sender. Please report any abuse of this e-mail service to postmaster(a)stbrn.ac.uk ---------------------------------------------------------------------------- *** This e-mail has been scanned by Symantec Anti-Virus software. ***

1 0

Would you plz help me? I have problem with defining ciphers in stunnel
by hjanzadeh＠sinamicro.com 19 Sep '06

19 Sep '06

1 0

4.17 stunnel with syslog-ng
by Jason Englander 15 Sep '06

15 Sep '06

I have a logging server at home set up with syslog-ng and stunnel. Earlier this morning, I upgraded stunnel on a logging client machine from 4.15 to 4.17, no problems. I upgraded the server from 4.15 to 4.17 and stunnel seemed to hang (run, but not detach) on startup. Very long story short (it was too early, I hadn't had enough coffee yet <g>), stunnel was trying to log to syslog, which wasn't running yet. Putting aside that I should've been using "output = /var/log/stunnel.log" instead, for a log server of all things :-), did something change in stunnel or did I screw something up that I don't remember doing? My startup script has been starting stunnel, then syslog-ng for years. I haven't downgraded to verify that it does/doesn't happen starting with a particular version, but I might do that later today out of curiosity. (before fixing, upgrading "important" machines) Also, FYI - configure created a file named "6," in the source directory with this in it: no LIBS=-lz -ldl -lutil -lpthread -L/usr/local/ssl/lib -lssl -lcrypto This seems to be the offending line in configure: echo "${ECHO_T}no" >&6, LIBS="$saved_LIBS" -> echo "${ECHO_T}no" >&6; LIBS="$saved_LIBS" I ran 'autoreconf -f -i' (autoconf 2.60, automake 1.9.6) and the line isn't in the new ./configure any more. Jason -- Jason Englander <jason(a)englanders.cc> 394F 7E02 C105 7268 777A 3F5A 0AC0 C618 0675 80CA

2 1

cannot compile stunnel on solaris 10 in a zone
by tomvo＠absi.be 15 Sep '06

15 Sep '06

Hi, I'm trying to compile stunnel on a solaris 10 (06/06 release) in a normal (non-global) zone. the compile fails at the mknod command. How do I install stunnel ? I could ofcourse create the device myself in the global zone, but i think it was in /usr/local/var/lib/stunnel/dev, I don't think that our user zone will have access to this device if we create it in the global zone. Anyone else struggled with the same problem ? thx, Tom. --------------------------------------------------------------------------- Tom Van Overbeke - ABSI Service Delivery Coordinator email: tomvo(a)absi.be Tel: +32 2 333 40 00 - Fax: +32 2 333 40 60 website: http://www.absi.be ---------------------------------------------------------------------------

1 0

stunnel problem on hp-ux 11.11
by matt.miller＠accenture.com 13 Sep '06

13 Sep '06

System specs: HP-UX 11.11 Stunnel 4.15 OpenSSL 0.8.7i Config File: ; Certificate/key is needed in server mode and optional in client mode ;cert = /opt/iexpress/stunnel/etc/stunnel/mail.pem ;key = /opt/iexpress/stunnel/etc/stunnel/mail.pem ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /opt/iexpress/stunnel/var/lib/stunnel/ ;setuid = nobody ;setgid = nogroup ; PID is created inside chroot jail pid = /tmp/stunnel.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail ;CApath = /certs ; It's often easier to use CAfile ;CAfile = /opt/iexpress/stunnel/etc/stunnel/certs.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /opt/iexpress/stunnel/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ;foreground = yes output = stunnel.log ; Service-level configuration [pop3s] ; Use it for client mode client = yes ;accept = 995 ;connect = 110 accept = localhost:110 connect = POP3S.MAILSERVER:995 ;[imaps] ;accept = 993 ;connect = 143 ;[ssmtp] ;accept = 465 ;connect = 25 ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini Problem: When I try to execute the following command "telnet localhost 110" I get an entry in the stunnel log file and I am unable to connect to the secure pop3 server. I know that this is not a firewall issue because I can telnet directly to the POP3S.MAILSERVER on port 995 and establish a connection, I also know that the server works fine because I set up stunnel on my windows xp machine and that did not have a problem establishing a connection. Any help on this issue would be great. Here is the log I am getting 2006.08.10 18:23:03 LOG5[16138:1]: stunnel 4.15 on hppa2.0w-hp-hpux11.11 with Op 2006.08.10 09:43:55 LOG5[7158:1]: 2000 clients allowed 2006.08.10 09:43:55 LOG7[7158:1]: FD 4 in non-blocking mode 2006.08.10 09:43:55 LOG7[7158:1]: FD 5 in non-blocking mode 2006.08.10 09:43:55 LOG7[7158:1]: FD 6 in non-blocking mode 2006.08.10 09:43:55 LOG7[7158:1]: SO_REUSEADDR option set on accept socket 2006.08.10 09:43:55 LOG7[7158:1]: pop3s bound to 127.0.0.1:110 2006.08.10 09:43:55 LOG7[7263:1]: Created pid file /tmp/stunnel.pid 2006.08.10 16:15:45 LOG7[7263:1]: pop3s accepted FD=0 from 127.0.0.1:57040 2006.08.10 16:15:45 LOG3[7263:1]: Connection rejected: create_client failed 2006.08.10 16:30:34 LOG7[7263:1]: pop3s accepted FD=0 from 127.0.0.1:57156 2006.08.10 16:30:34 LOG3[7263:1]: Connection rejected: create_client failed 2006.08.10 16:45:34 LOG7[7263:1]: pop3s accepted FD=0 from 127.0.0.1:57275 2006.08.10 16:45:34 LOG3[7263:1]: Connection rejected: create_client failed 2006.08.10 17:00:36 LOG7[7263:1]: pop3s accepted FD=0 from 127.0.0.1:57401 2006.08.10 17:00:36 LOG3[7263:1]: Connection rejected: create_client failed 2006.08.10 17:15:36 LOG7[7263:1]: pop3s accepted FD=0 from 127.0.0.1:57506 2006.08.10 17:15:36 LOG3[7263:1]: Connection rejected: create_client failed 2006.08.10 17:30:35 LOG7[7263:1]: pop3s accepted FD=0 from 127.0.0.1:57614 2006.08.10 17:30:35 LOG3[7263:1]: Connection rejected: create_client failed Matt T. Miller Accenture Minneapolis, MN USA 612-277-1826 aim: mttmiller8 email: matt.miller(a)accenture.com This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited.

1 0

RE: [stunnel-users] stunnel and AJP
by Jones Scott - sjones 13 Sep '06

13 Sep '06

Any chance you could send me a sample configuration file? :) Just got it install and going to start trying to get it setup. I am going to try to end the tunnel on a BigIP box. So just set it up on the apache server and hope it can end on the BigIP box. Thanks -----Original Message----- From: Richard.Hall [mailto:Richard.Hall@ingenta.com] Sent: Friday, August 25, 2006 4:08 PM To: Jones Scott - sjones Cc: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] stunnel and AJP Jason, On Fri, 25 Aug 2006, Jones Scott - sjones wrote: > Has anyone used stunnel to secure AJP traffic from apache to jboss Short answer: Yes. - Apache + mod_jk configured to talk to stunnel client on localhost rather than to JBoss AJP13 port - stunnel client talks to remote stunnel server - stunnel server talks to JBoss AJP13 port on _its_ localhost. Works a treat :-) We've even done it with a third machine in the middle, running an stunnel server and client back-to-back. Just don't ask why! HTH, Richard ************************************************************************* The information contained in this communication is confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please resend this communication to the sender and delete the original message or any copy of it from your computer system. Thank you. *************************************************************************

2 1

stunnel going to BigIP ssl
by Jones Scott - sjones 13 Sep '06

13 Sep '06

Has anyone used stunnel to end at a BipIP to decode the ssl traffic? If so, any issues or concerns? Thanks *************************************************************************** The information contained in this communication is confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please resend this communication to the sender and delete the original message or any copy of it from your computer system. Thank You. ****************************************************************************

1 0

"SSL_read returned WANT_READ: retrying" at 30Hz
by Vincent Lascaux 12 Sep '06

12 Sep '06

Hi, I'm trying to use rsync (2.6.8) through STunnel (4.16) to synchronize two PC over the internet (they both have the same version of stunnel and rsync). On the server, I have STunnel running with this configuration: cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=0 socket = r:TCP_NODELAY=0 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log [rsync] accept = 273 connect = 873 On the client I have this configuration: cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=0 socket = r:TCP_NODELAY=0 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log client = yes [rsync] accept = 873 connect = UrlOfMyServer:273 Then I connect with rsync using rsync -a -h --progress --stats --partial Account@localhost::RemotePath LocalPath I think the connection is not really stable. RSync sometimes hang. The log file on the client side show 2006.09.11 21:33:11 LOG7[2008:1468]: SSL_read returned WANT_READ: retrying at 30Hz (that's right, it means 30 times a second). My log file nearly gets bigger faster than my downloaded file ;) Is it expected? What does this line mean? I turned TCP_NODELAY to 0 thinking that it my give me synchronous sockets and that it would remove that error, but it didn't... Any help appreciated, Thanks -- Vincent

2 3

Stunnel 4.17 released
by Michal Trojnara 10 Sep '06

10 Sep '06

This is a bugfix release. Upgrade is recommended. Version 4.17, 2006.09.10, urgency: MEDIUM: * New features - Win32 DLLs for OpenSSL 0.9.8c. * Bugfixes - Problem with detecting getaddrinfo() in ./configure fixed. - Compilation problem due to misplaced #endif in ssl.c fixed. - Duplicate 220 in smtp_server() function in protocol.c fixed. - Minor os2.mak update. - Minor update of safestring()/safename() macros. sha1sum for stunnel-4.17.tar.gz file: 7a0ea800935e798bf938756000b57d002a99c280 Homepage and download: http://stunnel.mirt.net/ Best regards, Mike

1 0

Multiple HTTPS endpoints
by Andrew Culross 07 Sep '06

07 Sep '06

Can I use stunnel to connect mutiple https endpoints? I'm wondering if a config file like the below would work: [https] accept = 9876 connect = xxx.xxx.xxx.xxx:443 [https] accept = 9875 connect =yyy.yyy.yyy.yyy:443 Thanks in advance ! Andrew Culross TwoFour Systems (914) 220-8849 www.TwoFour.Com The views and opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of {TwoFour Systems, LLC or F-O-R Software, LLC}

1 0

Re: [stunnel-users] RFC 2487 test in smtp_server not reliable
by Hans Werner Strube 07 Sep '06

07 Sep '06

Hans Werner Strube wrote: > Michal Trojnara wrote: ... > > I'm going to do it the hard way and add another parameter to > > s_poll_wait() function. > > > > IMHO the timeout should be between 100ms and 500ms. What do you think? > > I have not tested the minimum required. However, it should be as short > as possible, since for a client using TLS, the full delay will always > occur on starting a connection. ... I have now done some measurements using snoop on a Solaris Ultra 2 SMTP server (100 MBit/s) with a Windows XP SP2 client (AMD Duron 1 GHz, 56 kBit/s phone-line modem, SeaMonkey 1.04 mail sender [equivalent to Thunderbird 1.5.x]). The delays between the end of initial connection handshake and the first nonzero data packet for six connections were usually between 10 and 100 ms but once reached 150 ms. Thus, 200 ms may be a reasonable value (although the sample is too small to rule out rare failures).

1 0

windows load levels
by Alex Turner 05 Sep '06

05 Sep '06

Guys, Bit of a newbie question here - but very import to me at least. We are looking to secure a web server that does no currently support SSL. One reason for this is that we want to be able to run the server on multiple hosts and doing so means sharing the sessions etc :-( So - I am interested if anyone has tested the stuffing out of stunnel on windows. IE seeing how well it could handle several hundred sockets simultaneously. Not only from a resource point of view, but from a scaling (n, n**2 etc) point of view. Any input at all will be very welcome. Soon I will be starting some test of my own using JMeter to load test. If anyone is interested in the results I will be happy to post. Cheers AJ Alexander J Turner Ph.D. HYPERLINK "http://www.deployview.com"www.deployview.com HYPERLINK "http://www.nerds-central.blogspot.com"www.nerds-central.blogspot.com HYPERLINK "http://www.project-network.com"www.project-network.com -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.7/437 - Release Date: 04/09/2006

2 1

Stunnel and CryptoApi
by Marco Aldegheri 05 Sep '06

05 Sep '06

Hello list! Someone knows if there is any way to integrate a Windows stunnel in client mode with the Windows Certificate Store? As OpenVPN does with the cryptoapicert parameter in my opinion it would be very useful because: 1. the private key would not just reside in a pem file but could be set not exportable. 2. the private key could be saved on a smartcard. I found a japaneese wstunnel project that seems to do it but I couldn't find any document about it in english and the gui is only in japaneese. Any hints? Thank you, Marco Aldegheri __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

Real address of client
by Gonzalo Diethelm 03 Sep '06

03 Sep '06

Hello, linux: Linux asus-gonzo 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux stunnel: stunnel 4.14 on i486-pc-linux-gnu PTHREAD+POLL+IPv6+LIBWRAP with OpenSSL 0.9.8a 11 Oct 2005 apache: Apache/2.0.55 I am using stunnel in Ubuntu to provide https serving to an http-only Apache installation. The stunnel config is: cert = /home/gonzo/src/bg/run/SSL/server.crt key = /home/gonzo/src/bg/run/SSL/server.crt chroot = /var/run/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = no [https] accept = 443 connect = 80 TIMEOUTclose = 0 Everything works perfectly, except for one minor detail: on the server, my PHP scripts do not have access to the real IP address of the client, and they always see this value as 127.0.0.1. I am aware the manual says that, if you use -l or -L, there will be an additional REMOTE_HOST environment variable with the desired IP address, but I am not sure how to make this work from a setup like mine, where the http server process is already running. Any help or hints are greatly appreciated. Best regards, -- Gonzalo Diethelm gonzalo.diethelm(a)aditiva.com

2 1

4.16 compilation fails for openssl without engine
by Hans Werner Strube 01 Sep '06

01 Sep '06

When openssl was compiled without engine support, compilation of src/ssl.c in stunnel-4.16 fails because of a misplaced #endif. Patch: --- src/ssl.c.ORI Thu Jun 29 23:12:03 2006 +++ src/ssl.c Fri Sep 1 11:30:25 2006 @@ -286,8 +286,6 @@ s_log(LOG_DEBUG, "Engine %d initialized", current_engine+1); } -#endif - ENGINE *get_engine(int i) { if(i<1 || i>current_engine) return NULL; @@ -294,4 +292,6 @@ return engines[i-1]; } +#endif + /* End of ssl.c */

1 0

Duplicate 220 in protocol.c, smtp_server
by Hans Werner Strube 01 Sep '06

01 Sep '06

At least since stunnel 4.15 - but not yet in 4.09 (don't know about the intermediate versions) - there is a (cosmetic only?) bug in the "welcome" forwarding of the smtp_server in protocol.c (lines 177-187 in 4.16): fdgetline(c, c->remote_fd.fd, line); if(!isprefix(line, "220")) { s_log(LOG_ERR, "Unknown server welcome"); longjmp(c->err, 1); } fdprintf(c, c->local_wfd.fd, "220%s + stunnel", line); fdgetline(c, c->local_rfd.fd, line); if(!isprefix(line, "EHLO ")) { s_log(LOG_ERR, "Unknown client EHLO"); longjmp(c->err, 1); } Although the line read from remote_fd.fd already starts with "220", another 220 is prepended in forwarding to local_wfd.fd, line 182. This seems to haveno adverse effects, but this line should better be changed to: fdprintf(c, c->local_wfd.fd, "%s + stunnel", line);

1 0

stunnel 4.16 released
by Michal Trojnara 01 Sep '06

01 Sep '06

A new version of stunnel has been released. Version 4.16, 2006.08.31, urgency: MEDIUM: * New features sponsored by Hewlett-Packard - A new global option to control engine: engineCtrl = <command>[:<parameter>] - A new service-level option to select engine to read private key: engineNum = <engine number> - OCSP support: ocsp = <URL> * New features - A new option to select version of SSL protocol: sslVersion = all|SSLv2|SSLv3|TLSv1 - Visual Studio vc.mak by David Gillingham <dgillingham(a)gmail.com>. - OS2 support by Paul Smedley (http://smedley.info) * Bugfixes - An ordinary user can install stunnel again. - Compilation problem with --enable-dh fixed. - Some minor compilation warnings fixed. - Service-level CRL cert store implemented. - GPF on protocol negotiations fixed. - Problem detecting addrinfo() on Tru64 fixed. - Default group is now detected by configure script. - Check for maximum number of defined services added. - OpenSSL_add_all_algorithms() added to SSL initialization. - configure script sections reordered to detect pthread library funcions. - RFC 2487 autodetection improved (thx to Hans Werner Strube). High resolution s_poll_wait() not currently supported by UCONTEXT threading. - More precise description of cert directory file names (thx to Muhammad Muquit). * Other changes - Maximum number of services increased from 64 to 256 when poll() is used. Homepage: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ sha1 hash for stunnel-4.16.tar.gz file: 6772e0c7f26c2596564ba66978597db8cd229a72 Best regards, Mike

2 1

Windows simultaneous sockets
by Alex 26 Aug '06

26 Aug '06

Guys, Bit of a newbie question here - but very import to me at least. We are looking to secure a web server that does no currently support SSL. One reason for this is that we want to be able to run the server on multiple hosts and doing so means sharing the sessions etc :-( So - I am interested if anyone has tested the stuffing out of stunnel on windows. IE seeing how well it could handle several hundred sockets simultaneously. Not only from a resource point of view, but from a scaling (n, n**2 etc) point of view. Any input at all will be very welcome. Soon I will be starting some test of my own using JMeter to load test. If anyone is interested in the results I will be happy to post. Cheers AJ -- www.deployview.com www.nerds-central.com www.project-network.com

1 0

stunnel and AJP
by Jones Scott - sjones 25 Aug '06

25 Aug '06

Has anyone used stunnel to secure AJP traffic from apache to jboss *************************************************************************** The information contained in this communication is confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please resend this communication to the sender and delete the original message or any copy of it from your computer system. Thank You. ****************************************************************************

2 1

stunnel 4-15 through proxy server
by Ingvar Tjøstheim 25 Aug '06

25 Aug '06

Hello I am on a network at work behind a firewall and a proxy server. I can connect to my friends linux computer with putty using proxy configuration and port 443. My friend set up his SSH server on port 443, of course. Yesterday, back home, I installed the following on my Windows2000 computer: Win32OpenSSL-v0.9.8b stunnel ver 4-14 FreeProxy version 3.92 This is the stunnel config file for my home computer: client=no verify=0 [wow] accept = 443 connect = 127.0.0.1:3456 TIMEOUTclose = 0 I set up my router to forward port 443 to this computer. I also registered a DynDNS domain and set up a client to update it. Then, still at home, I prepared another computer which I brought to work today. I installed the following on an XP machine: Win32OpenSSL-v0.9.8b stunnel ver 4-14 (which I upgraded to 4.15 today) SockScap_sc32r238 I set up SockScap to connect to 127.0.0.1 on port 2345 and used it to tunnel a program to the internet through my LAN and this Win2K computer. This was working fine when I was at home. My network at home has no proxy server, and I changed stunnel on my XP computer once at work to version 4-15. Then I added the two protocol lines in the config file as you see below. This is the config file on my XP computer at work: verify = 0 client = yes [wow] accept = 2345 protocol = connect protocolHost = www-proxy.DOMAINNAME.no:80 connect = MYDOMAINNAME.dnsalias.com:443 TIMEOUTclose = 0 Now, the funny thing is that it doesn't work. I used to have a SSH server on my computer at home (which is not running now), and I could connect to it from work. I know the setup could work if I just did things right. I know the FreeProxy and SockScap stuff works, cause it did at home. stunnel and the network is the only difference. Still I get these messages on the XP machine running stunnel as client at work when the SockScap program connects to it: 2006.08.25 10:02:29 LOG5[1280:2940]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.08.25 10:02:29 LOG5[1280:2940]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.08.25 10:02:29 LOG5[1280:2156]: No limit detected for the number of clients 2006.08.25 10:02:59 LOG5[1280:664]: wow connected from 127.0.0.1:3723 2006.08.25 10:03:05 LOG5[1280:972]: wow connected from 127.0.0.1:3725 2006.08.25 10:03:09 LOG5[1280:664]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.08.25 10:03:15 LOG5[1280:972]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket ...and it doesn't work. The program I try using through the tunnel never manages to connect. Anyone have a clue? Thank you very much!

1 0

Re: [stunnel-users] safestring and safename insecure
by Hans Werner Strube 24 Aug '06

24 Aug '06

Michal Trojnara wrote: > Assuming on some systems isprint(x) != isprint(x&0xff): any idea how to > exploit this "insecure" code? > > BTW: At least on Linux and Mac OS X isprint() returns 0 in both cases. The same holds for Solaris. I did not actually encounter an error but just got the idea that something may be insecure here by looking at the lines. After all, isprint etc. are often table-based macros without range-checking the argument. And "man isprint" clearly says that the character is unsigned: (Solaris:) The macro isascii() is defined on all integer values; the rest are defined only where the argument is an int, the value of which is representable as an unsigned char, or EOF, (Linux:) These functions check whether c, which must have the value of an unsigned char or EOF, falls into a certain character class according to the current locale.

1 0

safestring and safename insecure
by Hans Werner Strube 24 Aug '06

24 Aug '06

The macros safestring and safename in common.h are insecure if called for a character with high bit set, because (int)*p will sign-extend the byte on machines where char is signed. Possible patch (here for safestring; for safename correspondingly with isprint -> isalnum): do {char *p; for(p=(s); *p; p++) if(!isprint((int)*(unsigned char *)p)) *p='.';} while(0)

2 1

Re: [stunnel-users] accept is not allowed in inetd mode
by Tomasz Feliksiak 24 Aug '06

24 Aug '06

> I'm afraid I won't be able to tell you what's wrong with your > /etc/stunnel/smtps.conf without your /etc/stunnel/smtps.conf file. > 8-) > I guess you didn't define any service section. > > BTW. Please make sure to read the fine manual. There's also a Polish > version. > http://stunnel.mirt.net/static/stunnel.pl.html > > Greetings from Poland, > Mike You were right. I only define ports but dont uncomment protocol names in [] (like [pop3s]). [pop3s] accept = 995 connect = 110 ;[imaps] ;accept = 993 ;connect = 143 [ssmtp] accept = 465 connect = 25 Now it looks like this and it's working (earlier i have two configs, one per service). Poor thing about this is that it don't log anything before you dont uncomment this [] :P - hope no one other make this mistake. When I uncomment everything else was simple cause I have log :) and know what's going on. There was a problem with binding to ports cause I try to run it by inetd but I find your post at google to not run it by inetd. I change stunnel-inetd-4.15-1 to stunnel-standalone-4.15-1 (PLD Rulez :P) and problems gone. Is possible to run stunnel by inetd??? Thanks for help Michal. Stunnel is great :) Ps. I read the manual, english version. Sad thing is that I dont find out where I make mistake and when I read Polish wersion I do. Good thing is that it will be help for others who make this simple mistake. -- Pozdrawiam Tomasz Feliksiak vonom(a)intertel.net.pl

2 2

Stunnel Crash: Gmail SMTP over TLS
by Shatadal Ghosh 23 Aug '06

23 Aug '06

Hi, I am using stunnel 4.15 on Windows XP SP1 with Mozilla Thunderbird as the e-mail client. I do not have openSSL installed locally. I do have the libssl32.dll and libeay32.dll in the same directory as stunnel.exe (C:\Program Files\stunnel). I am running stunnel as a service. Stunnel crashes when I use it to send e-mail (SMTP via TLS) via gmail. According to the e-mail client configuration page on the gmail website http://mail.google.com/support/bin/answer.py?answer=13287&topic=1555 I tried to use SMTP over TLS to connect to smtp.gmail.com:587 My gmail-smtps block in stunnel.conf was ; SMTP service, listens on localhost:250 [gmail-smtps] protocol=smtp accept=localhost:250 connect=smtp.gmail.com:587 On trying to send an e-mail message via the above configuration stunnel crashed. The log file is as follows 2006.06.14 03:17:15 LOG5[3956:3512]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.06.14 03:17:15 LOG5[3956:3512]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.06.14 03:17:15 LOG5[3956:3600]: No limit detected for the number of clients 2006.06.14 03:17:15 LOG7[3956:3600]: FD 172 in non-blocking mode 2006.06.14 03:17:15 LOG7[3956:3600]: SO_REUSEADDR option set on accept socket 2006.06.14 03:17:15 LOG7[3956:3600]: gmail-pop3s bound to 127.0.0.1:1100 2006.06.14 03:17:15 LOG7[3956:3600]: FD 180 in non-blocking mode 2006.06.14 03:17:15 LOG7[3956:3600]: SO_REUSEADDR option set on accept socket 2006.06.14 03:17:15 LOG7[3956:3600]: gmail-smtps bound to 127.0.0.1:250 ....# info about other mail connections 2006.06.14 03:17:26 LOG7[3956:3600]: gmail-smtps accepted FD=236 from 127.0.0.1:3665 2006.06.14 03:17:26 LOG7[3956:3600]: Creating a new thread 2006.06.14 03:17:26 LOG7[3956:3600]: New thread created 2006.06.14 03:17:26 LOG7[3956:2812]: gmail-smtps started 2006.06.14 03:17:26 LOG7[3956:2812]: FD 236 in non-blocking mode 2006.06.14 03:17:26 LOG7[3956:2812]: TCP_NODELAY option set on local socket 2006.06.14 03:17:26 LOG5[3956:2812]: gmail-smtps connected from 127.0.0.1:3665 2006.06.14 03:17:26 LOG7[3956:2812]: FD 268 in non-blocking mode 2006.06.14 03:17:26 LOG7[3956:2812]: gmail-smtps connecting 64.233.167.111:587 2006.06.14 03:17:26 LOG7[3956:2812]: connect_wait: waiting 10 seconds 2006.06.14 03:17:26 LOG7[3956:2812]: connect_wait: connected 2006.06.14 03:17:26 LOG7[3956:2812]: Remote FD=268 initialized 2006.06.14 03:17:26 LOG7[3956:2812]: TCP_NODELAY option set on remote socket 2006.06.14 03:17:26 LOG5[3956:2812]: Negotiations for smtp (client side) started 2006.06.14 03:17:26 LOG7[3956:2812]: <- 220 mx.gmail.com ESMTP w66sm450524pyw 2006.06.14 03:17:26 LOG7[3956:2812]: -> 220 mx.gmail.com ESMTP w66sm450524pyw <logfile ends> What mistake am I making? Fortunately it seems that gmail supports SMTP over SSL too (smtp.gmail.com:465) and I am using that. However I am also facing this problem with another account which unfortunately allows SMTP only over TLS. Thanks, Shatadal. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0624-1, 06/13/2006 Tested on: 6/14/2006 6:22:04 AM avast! - copyright (c) 2000-2006 ALWIL Software. http://www.avast.com _________________________________________________________________ Is your PC infected? Get a FREE online computer virus scan from McAfee® Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

2 1

Re: [stunnel-users] RFC 2487 test in smtp_server not reliable
by Hans Werner Strube 23 Aug '06

23 Aug '06

Michal Trojnara wrote: > On 2006-08-22, at 10:55, Hans Werner Strube wrote: > > Instead of waiting, a better method would > > be to have a finer timeout resolution than 1 sec in > > s_poll_wait(...,...); > > setting the timeout to 1 (sec) would be too embarrassing for TLS > > connections. But this would require major changes in the sources. > > I'm going to do it the hard way and add another parameter to > s_poll_wait() function. > > IMHO the timeout should be between 100ms and 500ms. What do you think? I have not tested the minimum required. However, it should be as short as possible, since for a client using TLS, the full delay will always occur on starting a connection. It should be documented somewhere how this new constant could be configured in compilation.

1 0

RFC 2487 test in smtp_server not reliable
by Hans Werner Strube 23 Aug '06

23 Aug '06

In protocol.c, function smtp_server(), a test for plain SSL or STARTTLS usage (RFC 2487) is based on the availability of data from the client (c->local_rfd.fd). This works well in fast LANs but often fails for WAN connections through slow V90 modems. Especially with new Mozilla-based clients (also KMail and Evolution reported by other users) under Windows XP SP2 the test for data fails almost always, incorrectly resulting in an RFC 2487 handshake with error "Unknown client EHLO". This depends to some extent on the client: Outlook Express mostly works, Mozilla 1.7.x often worked after initial failure, SeaMonkey 1.x always fails. This seems to be a timing problem. I tried inserting a "usleep(50000);" before the switch(s_poll_wait(...)), which made SSL work with SeaMonkey (but often not for the first mail-sending attempt). Unfortunately, in Solaris 7 (where I tested stunnel), usleep is not yet thread-safe, maybe nanosleep(...,...) is preferable. Instead of waiting, a better method would be to have a finer timeout resolution than 1 sec in s_poll_wait(...,...); setting the timeout to 1 (sec) would be too embarrassing for TLS connections. But this would require major changes in the sources.

2 1

accept is not allowed in inetd mode
by vonom 23 Aug '06

23 Aug '06

Hello When i try to run stunnel by scripts or by hand stunnel /etc/stunnel/stunnel.conf (or other config) i see something like that: -bash-3.1# stunnel /etc/stunnel/pop3s.conf 2006.08.23 01:45:17 LOG7[24189:3083933376]: RAND_status claims sufficient entropy for the PRNG 2006.08.23 01:45:17 LOG6[24189:3083933376]: PRNG seeded successfully 2006.08.23 01:45:17 LOG7[24189:3083933376]: Certificate: /etc/stunnel/host-cert.pem 2006.08.23 01:45:17 LOG7[24189:3083933376]: Key file: /etc/stunnel/host-key.pem 2006.08.23 01:45:17 LOG7[24189:3083933376]: SSL context initialized for service stunnel file /etc/stunnel/pop3s.conf line 64: accept is not allowed in inetd mode No stunnel sesion, open ports or anything. I was very happy when I find out that I have stunnel-inetd-4.15-1 in my disto and it runs and ports are open. Everything great but when i try to send or receive email (postfix) it dont work. I spend a lot of time and a while ago i write telnet localhost 465 (or 995), ehlo hostname and see: -bash-3.1# telnet localhost 465 Trying 127.0.0.1.465... Connected to localhost. Escape character is '^]'. 2006.08.23 01:56:20 LOG7[24343:3083708096]: RAND_status claims sufficient entropy for the PRNG 2006.08.23 01:56:20 LOG6[24343:3083708096]: PRNG seeded successfully 2006.08.23 01:56:20 LOG7[24343:3083708096]: Certificate: /etc/stunnel/host-cert.pem 2006.08.23 01:56:20 LOG7[24343:3083708096]: Key file: /etc/stunnel/host-key.pem 2006.08.23 01:56:20 LOG7[24343:3083708096]: SSL context initialized for service stunnel file /etc/stunnel/smtps.conf line 64: accept is not allowed in inetd mode Connection closed by foreign host. When I write telnet localhost 25 -bash-3.1# telnet localhost 25 Trying 127.0.0.1.25... Connected to localhost. Escape character is '^]'. 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250 8BITMIME So It's OK I think. file /etc/stunnel/smtps.conf line 64: accept is not allowed in inetd mode Connection closed by foreign host. -line 64 point just last line of config file. I have no idea what it could be. Anyone know how to fix that?

2 1

Protocol using Connect
by Hutchison, Alan 21 Aug '06

21 Aug '06

I am trying to use the protocol entries in the config file as shown below (xyz substituted to protect employer & vendor). Below is the log. Stunnel abends as it is trying to authenticate to our corporate proxy. The network guys are seeing the attempt to authenticate but it does not appear to complete. Any thoughts? key=maxstpb.crt debug=7 output=stunnel.log client=yes [MarketAxess] accept=127.0.0.1:12345 delay=yes TIMEOUTbusy=120 TIMEOUTconnect=120 connect=xyz.xyz.com:80 protocol=connect protocolHost=xyz.xyz.com:443 protocolCredentials=xyz:xyz 2006.08.21 15:13:24 LOG5[2520:1312]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.08.21 15:13:24 LOG5[2520:1312]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv4 2006.08.21 15:13:24 LOG5[2520:3184]: No limit detected for the number of clients 2006.08.21 15:13:24 LOG7[2520:3184]: FD 192 in non-blocking mode 2006.08.21 15:13:24 LOG7[2520:3184]: SO_REUSEADDR option set on accept socket 2006.08.21 15:13:24 LOG7[2520:3184]: MarketAxess bound to 127.0.0.1:12345 2006.08.21 15:14:00 LOG7[2520:3184]: MarketAxess accepted FD=200 from 127.0.0.1:4200 2006.08.21 15:14:00 LOG7[2520:3184]: Creating a new thread 2006.08.21 15:14:00 LOG7[2520:3184]: New thread created 2006.08.21 15:14:00 LOG7[2520:2560]: MarketAxess started 2006.08.21 15:14:00 LOG7[2520:2560]: FD 200 in non-blocking mode 2006.08.21 15:14:00 LOG5[2520:2560]: MarketAxess connected from 127.0.0.1:4200 2006.08.21 15:14:00 LOG7[2520:2560]: FD 416 in non-blocking mode 2006.08.21 15:14:00 LOG7[2520:2560]: MarketAxess connecting xyz.xyz.xyz.xyz:80 2006.08.21 15:14:00 LOG7[2520:2560]: connect_wait: waiting 120 seconds 2006.08.21 15:14:00 LOG7[2520:2560]: connect_wait: connected 2006.08.21 15:14:00 LOG7[2520:2560]: Remote FD=416 initialized 2006.08.21 15:14:00 LOG5[2520:2560]: Negotiations for connect (client side) started 2006.08.21 15:14:00 LOG7[2520:2560]: -> CONNECT xyz.xyz.com:443 HTTP/1.1 Alan R. Hutchison 515-362-1272 -----Message Disclaimer----- This e-mail message is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by reply email to Connect(a)principal.com and delete or destroy all copies of the original message and attachments thereto. Email sent to or from the Principal Financial Group or any of its member companies may be retained as required by law or regulation. Nothing in this message is intended to constitute an Electronic signature for purposes of the Uniform Electronic Transactions Act (UETA) or the Electronic Signatures in Global and National Commerce Act ("E-Sign") unless a specific statement to the contrary is included in this message. While this communication may be used to promote or market a transaction or an idea that is discussed in the publication, it is intended to provide general information about the subject matter covered and is provided with the understanding that The Principal is not rendering legal, accounting, or tax advice. It is not a marketed opinion and may not be used to avoid penalties under the Internal Revenue Code. You should consult with appropriate counsel or other advisors on all matters pertaining to legal, tax, or accounting obligations and requirements.

1 0

limit connections per certificate
by Eric H. Jung 14 Aug '06

14 Aug '06

Hi, I'd like to limit the number of connections to stunnel (in server mode) by client certificate. In other words, I want all clients to only have 1 open socket connection to the server at a time. Is this possible with stunnel out-of-the-box, or must I write a patch to handle it? Thank you, grimholtz

1 0

stunnel through xinetd: process not terminating after use
by Alex Forrow 07 Aug '06

07 Aug '06

Hi, Im using stunnel through xinetd to forward some local unencrypted ldap connections to our ssl ldap server. Seems to work ok but after each use the stunnel process does not terminate, so I end up with losts of processes not doing anything. After a few days, these processes reach a limit and connections fail. As you can see, the connection has finished, but the process still exists: [root@lynx stunnel]# ps -e | grep stunnel 2396 ? 00:00:00 stunnel 2517 ? 00:00:00 stunnel 2575 ? 00:00:00 stunnel 2576 ? 00:00:00 stunnel [root@lynx stunnel]# netstat -p | grep stunnel tcp 0 0 lynx.seekit.co.uk:ldaplo lynx.seekit.co.uk:60390 CLOSE_WAIT 2396/stunnel unix 2 [ ] DGRAM 3204569 2576/stunnel unix 2 [ ] DGRAM 3204562 2575/stunnel unix 2 [ ] DGRAM 3203127 2517/stunnel unix 2 [ ] DGRAM 3202108 2396/stunnel Heres the xinetd configuration for stunnel (/etc/xinetd.d/ldaplo): # default: on # description: Stunnel to connect to LDAP for an insecure local session service ldaplo { disable = no #flags = REUSE port = 390 socket_type = stream wait = no user = nobody server = /usr/sbin/stunnel server_args = /etc/stunnel/ldap.conf # log_on_failure += USERID } Heres the stunnel configuration file (/etc/stunnel/ldap.conf): client = yes connect = 636 Cheers, Alex Forrow

1 0

Stunnel without certificates
by Shane 04 Aug '06

04 Aug '06

Hi, I am new to this group and also to Stunnel utility. I would like to use Stunnel to secure my http connections. Here is a twist. I just want to encrypt the link and don't bother much about the authentication. 1. Can I use Stunnel without certificates? 2. If certificate is mandatory, can I use only the file which contains "keys" but not use other authentication credentials? 3. Can I use anonymous DH Ciphers so that authentication phase is assumed done and both client and servers generate the keys? Any help and guidance will useful. Thanks, -Ravi Joshi __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

TIMEOUTbusy
by Martin Beauchamp 02 Aug '06

02 Aug '06

Hi List, I'm running Stunnel 4.15 under win32 in client mode. Can someone give me a better idea about what TIMEOUTbusy does? The docs state that it is "time to wait for expected data." But what does Stunnel do after this period? Does it disconnect from the remote server? Does it attempt another SSL session after some interval? Thanks for any addition information! Martin -- Martín Beauchamp Systems Engineer Park Slope Food Coop, Inc. (718) 783-2187 (718) 622-5685 Fax

1 0

stunnel crashing on connect
by Kevin King 24 Jul '06

24 Jul '06

Hi, I am attempting to run stunnel on Windows XP Pro but it is crashing as soon as anything connects to it. I am using it to create a secure TLS tunnel in front of an SMTP mail server and from what I read I should be able to do this and stunnel will handle the STARTLS commands. I downloaded the following windows binary: 562589 Mar 11 13:02:35 2006 stunnel-4.15-installer.exe I made minimal changes to stunnel.conf: 1) added the line "protocol = smtp" 2) uncommented the debug lines (still crashes if I leave these lines alone) I then start stunnel, either as a service or from cmd line - same thing happens >From a command prompt I then "telnet localhost 465" and send "EHLO mydomain.com hi" Stunnel responds with "250-EHLO mydomain.com hi Welcome". I am also running hMailServer on the same machine listening on port 25. It looks like stunnel is forwarded the initial EHLO to hMailServer, then hMailServer responds correctly and stunnel forwards that response back to me. Then stunnel crashes immediatly. Following is the log: 2006.07.20 10:28:41 LOG7[112:1656]: RAND_status claims sufficient entropy for the PRNG 2006.07.20 10:28:41 LOG6[112:1656]: PRNG seeded successfully 2006.07.20 10:28:41 LOG7[112:1656]: Certificate: stunnel.pem 2006.07.20 10:28:41 LOG7[112:1656]: Key file: stunnel.pem 2006.07.20 10:28:41 LOG7[112:1656]: SSL context initialized for service pop3s 2006.07.20 10:28:41 LOG7[112:1656]: Certificate: stunnel.pem 2006.07.20 10:28:41 LOG7[112:1656]: Key file: stunnel.pem 2006.07.20 10:28:41 LOG7[112:1656]: SSL context initialized for service imaps 2006.07.20 10:28:41 LOG7[112:1656]: Certificate: stunnel.pem 2006.07.20 10:28:41 LOG7[112:1656]: Key file: stunnel.pem 2006.07.20 10:28:41 LOG7[112:1656]: SSL context initialized for service ssmtp 2006.07.20 10:28:41 LOG5[112:1656]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.07.20 10:28:41 LOG5[112:1656]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.07.20 10:28:41 LOG5[112:2564]: No limit detected for the number of clients 2006.07.20 10:28:41 LOG7[112:2564]: FD 1884 in non-blocking mode 2006.07.20 10:28:41 LOG7[112:2564]: SO_REUSEADDR option set on accept socket 2006.07.20 10:28:41 LOG7[112:2564]: pop3s bound to 0.0.0.0:995 2006.07.20 10:28:41 LOG7[112:2564]: FD 1872 in non-blocking mode 2006.07.20 10:28:41 LOG7[112:2564]: SO_REUSEADDR option set on accept socket 2006.07.20 10:28:41 LOG7[112:2564]: imaps bound to 0.0.0.0:993 2006.07.20 10:28:41 LOG7[112:2564]: FD 1864 in non-blocking mode 2006.07.20 10:28:41 LOG7[112:2564]: SO_REUSEADDR option set on accept socket 2006.07.20 10:28:41 LOG7[112:2564]: ssmtp bound to 0.0.0.0:465 2006.07.20 10:28:59 LOG7[112:2564]: ssmtp accepted FD=1840 from 127.0.0.1:1543 2006.07.20 10:28:59 LOG7[112:2564]: Creating a new thread 2006.07.20 10:28:59 LOG7[112:2564]: New thread created 2006.07.20 10:28:59 LOG7[112:2936]: ssmtp started 2006.07.20 10:28:59 LOG7[112:2936]: FD 1840 in non-blocking mode 2006.07.20 10:28:59 LOG7[112:2936]: TCP_NODELAY option set on local socket 2006.07.20 10:28:59 LOG5[112:2936]: ssmtp connected from 127.0.0.1:1543 2006.07.20 10:28:59 LOG7[112:2936]: FD 1812 in non-blocking mode 2006.07.20 10:28:59 LOG7[112:2936]: ssmtp connecting 127.0.0.1:25 2006.07.20 10:28:59 LOG7[112:2936]: connect_wait: waiting 10 seconds 2006.07.20 10:28:59 LOG7[112:2936]: connect_wait: connected 2006.07.20 10:28:59 LOG7[112:2936]: Remote FD=1812 initialized 2006.07.20 10:28:59 LOG7[112:2936]: TCP_NODELAY option set on remote socket 2006.07.20 10:28:59 LOG5[112:2936]: Negotiations for smtp (server side) started 2006.07.20 10:28:59 LOG7[112:2936]: RFC 2487 detected 2006.07.20 10:28:59 LOG7[112:2936]: <- 220 hmailserver ESMTP 2006.07.20 10:28:59 LOG7[112:2936]: -> 220220 hmailserver ESMTP + stunnel 2006.07.20 10:29:09 LOG7[112:2936]: <- EHLO mydomain.com hi 2006.07.20 10:29:09 LOG7[112:2936]: -> 250-EHLO mydomain.com hi Welcome Here is the output of stunnel -version: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 Global options debug = 5 RNDbytes = 64 RNDoverwrite = yes service = stunnel taskbar = yes Service-level options cert = stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = stunnel.pem session = 300 seconds TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none 2006.07.20 10:25:04 LOG3[3256:3456]: Server is down I tried building the source and debugging it but I only found some batch files refering to the MS embedded compiler. Why would I want to compile this for an embedded or mobile device? That is what that compiler is for. What makefile or compiler should I be using on windows if I wish to build stunnel on windows? Which I would rather not have to do, I would like to just use the binary but it is crashing before I ever get a chance to test it. Any help would greatly be appreciated. thanks, -Kevin

1 0

stunnel version issue?
by NobbyNoMates 22 Jul '06

22 Jul '06

Dear all - I am trying to set up an stunnel connection on an Ubuntu Dapper box. This system seems to give me (stunnel -V) : stunnel 3.26 on i486-pc-linux-gnu PTHREAD+LIBWRAP with OpenSSL 0.9.8a 11 Oct 2005 and no matter where I look. I cannot seem to find an option to specify a config file when starting stunnel. Unfortunately, the instructions which I have received for setting up my (Direct Connect) client, contain such a config file which is supposed to be needed. It contains the following: client = yes delay = yes output = stunnel.log debug = notice pid = stunnel.pid [DC Server] connect = server.address.org:AAAAA accept = 127.0.0.1:BBBBB where of course the AAAA and BBBB are port numbers. Now I wonder if there is any way to make my stunnel version function in the specified way without the config file? Or is there some alternative way to specify this kind of config? Any suggestion would be much appreciated! Best regards, Erik

2 2

Clearer and Detailed version of the mail Stunnel for HTTP encription
by LoopBack Inc 20 Jul '06

20 Jul '06

Hello. I rewrote some parts of the question, and illustrated it by a small ASCII picture to clearifiy the whole situation. I don't know why I haven't got a single answer, because over 350 people are subscribed to the list, so I hope that I'll get some help now. It would be grateful. I use SocksCap to forward the iexplore cnnections to another port, a port on which stunnel listens. On PC1, the client, stunnel is listening on port 500. So when I start iexplore.exe with SocksCap every connection goes to 127.0.0.1:500. PC1 connects to PC2, with connect = 192.168.0.2:123 On PC2, the server, stunnel listens on port 500. then is connects to the internet with connect = 127.0.0.1:80. Here is the problem, stunnel doesn't connect to the internet over 127.0.0.1:80. I don't know why, but it doesnt. ---Stunnel.conf SERVER--- .. [inet] accept = 127.0.0.1:123 connect = 127.0.0.1:80 ---Stunnel.conf CLIENT--- .. [inet] accept = 127.0.0.1:500 connect = 192.168.0.2:123 LOGs from the SERVER: 2006.07.18 16:56:07 LOG7[2332:2720]: inet accepted FD=208 from 192.168.0.1:2156 2006.07.18 16:56:07 LOG7[2332:2720]: Creating a new thread 2006.07.18 16:56:07 LOG7[2332:2720]: New thread created 2006.07.18 16:56:07 LOG7[2332:1880]: inet started 2006.07.18 16:56:07 LOG7[2332:1880]: FD 208 in non-blocking mode 2006.07.18 16:56:07 LOG5[2332:1880]: inet connected from 192.168.0.1:2156 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): before/accept initialization 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 read client hello A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 write server hello A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 write change cipher spec A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 write finished A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 flush data 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 read finished A 2006.07.18 16:56:07 LOG7[2332:1880]: 1 items in the session cache 2006.07.18 16:56:07 LOG7[2332:1880]: 0 client connects (SSL_connect()) 2006.07.18 16:56:07 LOG7[2332:1880]: 0 client connects that finished 2006.07.18 16:56:07 LOG7[2332:1880]: 0 client renegotiations requested 2006.07.18 16:56:07 LOG7[2332:1880]: 7 server connects (SSL_accept()) 2006.07.18 16:56:07 LOG7[2332:1880]: 7 server connects that finished 2006.07.18 16:56:07 LOG7[2332:1880]: 0 server renegotiations requested 2006.07.18 16:56:07 LOG7[2332:1880]: 5 session cache hits 2006.07.18 16:56:07 LOG7[2332:1880]: 1 session cache misses 2006.07.18 16:56:07 LOG7[2332:1880]: 1 session cache timeouts 2006.07.18 16:56:07 LOG6[2332:1880]: SSL accepted: previous session reused 2006.07.18 16:56:07 LOG7[2332:1880]: FD 244 in non-blocking mode 2006.07.18 16:56:07 LOG7[2332:1880]: inet connecting 127.0.0.1:80 2006.07.18 16:56:07 LOG7[2332:1880]: connect_wait: waiting 10 seconds 2006.07.18 16:56:07 LOG7[2332:1880]: connect_wait: connected 2006.07.18 16:56:07 LOG7[2332:1880]: Remote FD=244 initialized After nothing happend for 52 seconds I aborted in the iexplore.exe to open the page. 2006.07.18 16:56:59 LOG7[2332:1880]: SSL alert (read): warning: close notify 2006.07.18 16:56:59 LOG7[2332:1880]: SSL closed on SSL_read 2006.07.18 16:56:59 LOG7[2332:1880]: Socket write shutdown 2006.07.18 16:56:59 LOG7[2332:1880]: SSL write shutdown 2006.07.18 16:56:59 LOG7[2332:1880]: SSL alert (write): warning: close notify 2006.07.18 16:56:59 LOG6[2332:1880]: SSL_shutdown successfully sent close_notify 2006.07.18 16:56:59 LOG5[2332:1880]: Connection closed: 0 bytes sent to SSL, 3 bytes sent to socket 2006.07.18 16:56:59 LOG7[2332:1880]: inet finished (0 left) LOGs from the CLIENT: 2006.07.18 17:10:11 LOG7[1756:4756]: inet accepted FD=444 from 127.0.0.1:2284 2006.07.18 17:10:11 LOG7[1756:4756]: Creating a new thread 2006.07.18 17:10:11 LOG7[1756:4756]: New thread created 2006.07.18 17:10:11 LOG7[1756:2840]: inet started 2006.07.18 17:10:11 LOG7[1756:2840]: FD 444 in non-blocking mode 2006.07.18 17:10:11 LOG7[1756:2840]: TCP_NODELAY option set on local socket 2006.07.18 17:10:11 LOG5[1756:2840]: inet connected from 127.0.0.1:2284 2006.07.18 17:10:11 LOG7[1756:2840]: FD 348 in non-blocking mode 2006.07.18 17:10:11 LOG7[1756:2840]: inet connecting 192.168.0.2:123 2006.07.18 17:10:11 LOG7[1756:2840]: connect_wait: waiting 10 seconds 2006.07.18 17:10:11 LOG7[1756:2840]: connect_wait: connected 2006.07.18 17:10:11 LOG7[1756:2840]: Remote FD=348 initialized 2006.07.18 17:10:11 LOG7[1756:2840]: TCP_NODELAY option set on remote socket 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): before/connect initialization 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 write client hello A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 read server hello A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 read finished A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 write change cipher spec A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 write finished A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 flush data 2006.07.18 17:10:11 LOG7[1756:2840]: 17 items in the session cache 2006.07.18 17:10:11 LOG7[1756:2840]: 65 client connects (SSL_connect()) 2006.07.18 17:10:11 LOG7[1756:2840]: 65 client connects that finished 2006.07.18 17:10:11 LOG7[1756:2840]: 0 client renegotiations requested 2006.07.18 17:10:11 LOG7[1756:2840]: 0 server connects (SSL_accept()) 2006.07.18 17:10:11 LOG7[1756:2840]: 0 server connects that finished 2006.07.18 17:10:11 LOG7[1756:2840]: 0 server renegotiations requested 2006.07.18 17:10:11 LOG7[1756:2840]: 48 session cache hits 2006.07.18 17:10:11 LOG7[1756:2840]: 0 session cache misses 2006.07.18 17:10:11 LOG7[1756:2840]: 0 session cache timeouts 2006.07.18 17:10:11 LOG6[1756:2840]: SSL connected: previous session reused Nothing happendend, I aborted iexplore.exe 2006.07.18 17:10:25 LOG7[1756:2840]: Socket closed on read 2006.07.18 17:10:25 LOG7[1756:2840]: SSL write shutdown 2006.07.18 17:10:25 LOG7[1756:2840]: SSL alert (write): warning: close notify 2006.07.18 17:10:25 LOG7[1756:2840]: SSL_shutdown retrying 2006.07.18 17:10:25 LOG7[1756:2840]: SSL doesn't need to read or write 2006.07.18 17:10:25 LOG7[1756:2840]: SSL alert (read): warning: close notify 2006.07.18 17:10:26 LOG7[1756:2840]: SSL closed on SSL_read 2006.07.18 17:10:26 LOG7[1756:2840]: Socket write shutdown 2006.07.18 17:10:26 LOG5[1756:2840]: Connection closed: 3 bytes sent to SSL, 0 bytes sent to socket 2006.07.18 17:10:26 LOG7[1756:2840]: inet finished (0 left) So the problem is that stunnel doesn't connect to the internet on PC2. I think i have to use something different than connect = 127.0.0.1:80 on PC2, but not sure. The version of stunnel is 4.15 I'm using Windows. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

4 3

Re: [stunnel-users] Clearer and Detailed version of the mail Stunnelfor HTTP enc
by Ian 20 Jul '06

20 Jul '06

On 20 Jul 2006 at 14:50, LoopBack Inc wrote: > Hello Ian, > > > Yes thats excatly what I want to do. > > In fact, if possible, this I haven't described yes, I would like to encript > every program I want through PC2, used as a proxy, like you said. > But if it would work with the http it wouldn't be bad. > > Thank you for your reply. Hi, Ok, this has clarified things for me. Another question, do you have a copy of the proxy program (SocksCap ?) running on PC2? If not then this is the problem. I believe that stunnel does not itself act as a proxy. It simply acts as a tunnel. >From your description of your config I suspect that you should have a second copy of SocksCap listenening on PC2 which will forward data onto the internet. A quick example: PC1: SocksCap listening on port 8080 ( for example) forwards to 127.0.0.1:500 stunnel listening on port 500, forwarded any data to PC2 port 500 PC2: stunnel listening on port 500 forwards data to 127.0.0.1:8080 SocksCap listening on port 8080 forwards data out to the internet. This will encrypt data between PC1 & PC2 but after that it will be back in plain. In order to test this I would break it down into its individual components and test each stage. I recommend downloading netcat (http://netcat.sourceforge.net/ or google for it) and learn how to use it. Sorry I can't help you with this bit, its better if you learn it yourself - and once you have you will wonder how you ever managed without it ;) Regards Ian --

1 0

Stunnel for HTTP encription
by LoopBack Inc 18 Jul '06

18 Jul '06

Hello! I'm tring to encript HTTP. I use two PCs, PC1 and PC2. PC1 is a client PC2 is a server. IP of PC1:192.168.0.1 IP of PC2:192.168.0.2 I use SocksCap to forward the iexplore cnnections to another port, a port on which stunnel listens. On PC1, the client, stunnel is listening on port 500. So when I start iexplore.exe with SocksCap every connection goes to 127.0.0.1:500. PC1 connects to PC2, with connect = 192.168.0.2:123 On PC2, the server, stunnel listens on port 500. then is connects to the internet with connect = 127.0.0.1:80. Here is the problem, stunnel doesn't connect to the internet over 127.0.0.1:80. I don't know why, but it doesnt. LOGs from the SERVER: 2006.07.18 16:56:07 LOG7[2332:2720]: inet accepted FD=208 from 192.168.0.1:2156 2006.07.18 16:56:07 LOG7[2332:2720]: Creating a new thread 2006.07.18 16:56:07 LOG7[2332:2720]: New thread created 2006.07.18 16:56:07 LOG7[2332:1880]: inet started 2006.07.18 16:56:07 LOG7[2332:1880]: FD 208 in non-blocking mode 2006.07.18 16:56:07 LOG5[2332:1880]: inet connected from 192.168.0.1:2156 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): before/accept initialization 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 read client hello A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 write server hello A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 write change cipher spec A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 write finished A 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 flush data 2006.07.18 16:56:07 LOG7[2332:1880]: SSL state (accept): SSLv3 read finished A 2006.07.18 16:56:07 LOG7[2332:1880]: 1 items in the session cache 2006.07.18 16:56:07 LOG7[2332:1880]: 0 client connects (SSL_connect()) 2006.07.18 16:56:07 LOG7[2332:1880]: 0 client connects that finished 2006.07.18 16:56:07 LOG7[2332:1880]: 0 client renegotiations requested 2006.07.18 16:56:07 LOG7[2332:1880]: 7 server connects (SSL_accept()) 2006.07.18 16:56:07 LOG7[2332:1880]: 7 server connects that finished 2006.07.18 16:56:07 LOG7[2332:1880]: 0 server renegotiations requested 2006.07.18 16:56:07 LOG7[2332:1880]: 5 session cache hits 2006.07.18 16:56:07 LOG7[2332:1880]: 1 session cache misses 2006.07.18 16:56:07 LOG7[2332:1880]: 1 session cache timeouts 2006.07.18 16:56:07 LOG6[2332:1880]: SSL accepted: previous session reused 2006.07.18 16:56:07 LOG7[2332:1880]: FD 244 in non-blocking mode 2006.07.18 16:56:07 LOG7[2332:1880]: inet connecting 127.0.0.1:80 2006.07.18 16:56:07 LOG7[2332:1880]: connect_wait: waiting 10 seconds 2006.07.18 16:56:07 LOG7[2332:1880]: connect_wait: connected 2006.07.18 16:56:07 LOG7[2332:1880]: Remote FD=244 initialized After nothing happend for 52 seconds I aborted in the iexplore.exe to open the page. 2006.07.18 16:56:59 LOG7[2332:1880]: SSL alert (read): warning: close notify 2006.07.18 16:56:59 LOG7[2332:1880]: SSL closed on SSL_read 2006.07.18 16:56:59 LOG7[2332:1880]: Socket write shutdown 2006.07.18 16:56:59 LOG7[2332:1880]: SSL write shutdown 2006.07.18 16:56:59 LOG7[2332:1880]: SSL alert (write): warning: close notify 2006.07.18 16:56:59 LOG6[2332:1880]: SSL_shutdown successfully sent close_notify 2006.07.18 16:56:59 LOG5[2332:1880]: Connection closed: 0 bytes sent to SSL, 3 bytes sent to socket 2006.07.18 16:56:59 LOG7[2332:1880]: inet finished (0 left) LOGs from the CLIENT: 2006.07.18 17:10:11 LOG7[1756:4756]: inet accepted FD=444 from 127.0.0.1:2284 2006.07.18 17:10:11 LOG7[1756:4756]: Creating a new thread 2006.07.18 17:10:11 LOG7[1756:4756]: New thread created 2006.07.18 17:10:11 LOG7[1756:2840]: inet started 2006.07.18 17:10:11 LOG7[1756:2840]: FD 444 in non-blocking mode 2006.07.18 17:10:11 LOG7[1756:2840]: TCP_NODELAY option set on local socket 2006.07.18 17:10:11 LOG5[1756:2840]: inet connected from 127.0.0.1:2284 2006.07.18 17:10:11 LOG7[1756:2840]: FD 348 in non-blocking mode 2006.07.18 17:10:11 LOG7[1756:2840]: inet connecting 192.168.0.2:123 2006.07.18 17:10:11 LOG7[1756:2840]: connect_wait: waiting 10 seconds 2006.07.18 17:10:11 LOG7[1756:2840]: connect_wait: connected 2006.07.18 17:10:11 LOG7[1756:2840]: Remote FD=348 initialized 2006.07.18 17:10:11 LOG7[1756:2840]: TCP_NODELAY option set on remote socket 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): before/connect initialization 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 write client hello A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 read server hello A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 read finished A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 write change cipher spec A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 write finished A 2006.07.18 17:10:11 LOG7[1756:2840]: SSL state (connect): SSLv3 flush data 2006.07.18 17:10:11 LOG7[1756:2840]: 17 items in the session cache 2006.07.18 17:10:11 LOG7[1756:2840]: 65 client connects (SSL_connect()) 2006.07.18 17:10:11 LOG7[1756:2840]: 65 client connects that finished 2006.07.18 17:10:11 LOG7[1756:2840]: 0 client renegotiations requested 2006.07.18 17:10:11 LOG7[1756:2840]: 0 server connects (SSL_accept()) 2006.07.18 17:10:11 LOG7[1756:2840]: 0 server connects that finished 2006.07.18 17:10:11 LOG7[1756:2840]: 0 server renegotiations requested 2006.07.18 17:10:11 LOG7[1756:2840]: 48 session cache hits 2006.07.18 17:10:11 LOG7[1756:2840]: 0 session cache misses 2006.07.18 17:10:11 LOG7[1756:2840]: 0 session cache timeouts 2006.07.18 17:10:11 LOG6[1756:2840]: SSL connected: previous session reused Nothing happendend, I aborted iexplore.exe 2006.07.18 17:10:25 LOG7[1756:2840]: Socket closed on read 2006.07.18 17:10:25 LOG7[1756:2840]: SSL write shutdown 2006.07.18 17:10:25 LOG7[1756:2840]: SSL alert (write): warning: close notify 2006.07.18 17:10:25 LOG7[1756:2840]: SSL_shutdown retrying 2006.07.18 17:10:25 LOG7[1756:2840]: SSL doesn't need to read or write 2006.07.18 17:10:25 LOG7[1756:2840]: SSL alert (read): warning: close notify 2006.07.18 17:10:26 LOG7[1756:2840]: SSL closed on SSL_read 2006.07.18 17:10:26 LOG7[1756:2840]: Socket write shutdown 2006.07.18 17:10:26 LOG5[1756:2840]: Connection closed: 3 bytes sent to SSL, 0 bytes sent to socket 2006.07.18 17:10:26 LOG7[1756:2840]: inet finished (0 left) So the problem is that stunnel doesn't connect to the internet on PC2. I think i have to use something different than connect = 127.0.0.1:80 on PC2, but not sure. I'm using Windwos. Thanks for helping. _________________________________________________________________ On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement

1 0

exclusively TLS
by Richard Kotal 17 Jul '06

17 Jul '06

Hey, I had the same problem. I solved this problem. You must download my patch: http://www.aolserver.cz/, or http://www.aolserver.cz/download/stunnel-4.15_patch.tgz Richard Kotal info(a)waplikace.cz www.aolserver.cz prepis.waplikace.cz www.nvp.cz /> I need to talk to a server that is requiring pure TLS. It seems that > STUNNEL always starts with SSL. How do I get STUNNEL to start the client //> //side conversation with TLS? //> / /> // //> //John Moehrke //> //Enterprise Security Architect //> //GE Healthcare //> //T 262 293 1667 //> //W126 N7449 Flint Road, Suite 200, Menomonee Falls, WI 53051 //> / <http://stunnel.mirt.net/mailman/listinfo/stunnel-users>/John.Moehrke at med.ge.com <http://stunnel.mirt.net/mailman/listinfo/stunnel-users> <mailto:John.Moehrke at med.ge.com <http://stunnel.mirt.net/mailman/listinfo/stunnel-users>> //> //www.gehealthcare.com <http://www.gehealthcare.com/> //> //What I may see or hear in the course of the treatment or even outside of //> //the treatment in regard to the life of men, which on no account one must //> //spread abroad, I will keep to myself, holding such things shameful to be //> //spoken about. (One Portion of the Hippocratic Oath - Hippocrates, circa //> //400 B.C.) /

1 0

configure/compile issue on AIX
by Boxall, John 13 Jul '06

13 Jul '06

I'm trying to get stunnel working on AIX 5.3. I'm running the configure with "--prefix=/opt/freeware", however, when I start stunnel it is looking for the stunnel.conf file in /usr/local/etc/stunnel. Shouldn't it be looking for it in "/opt/freeware/etc/stunnel", which is where the "make install" put it? Regards, John Boxall

3 4

newbie: stunnel works but do not encrypt
by Gallas Róbert 13 Jul '06

13 Jul '06

Hello, I setup stunnel( v4.15 win32 port ) on both side, client and server. Connection is working but does not encrypt. Setup is done for ORACLE and WEB. Oracle`s listener is setup with "USE_SHARED_SOCKET = TRUE" variable and works fine with OpenSSH with PUTTY I use default configuration just with the needed basic customization: # ##Client cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log client = yes [web] accept = 3128 connect = 10.160.1.220:3128 [oracle] accept = 1521 connect = 10.160.1.220:4892 ### Server: cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [web] accept = 3128 connect = 10.160.0.4:3128 [oracle] accept = 4892 connect = 10.160.1.220:1521 Any good sugestions? Thanks for your answers Regards Robert

2 4

(no subject)
by Gallas Róbert 12 Jul '06

12 Jul '06

Hello, I setup stunnel( v4.15 win32 port ) on both side, client and server. Connection is working but does not encrypt. Setup is done for ORACLE and WEB. Oracle`s listener is setup with "USE_SHARED_SOCKET = TRUE" variable and works fine with OpenSSH with PUTTY I use default configuration just with the needed basic customization: # ##Client cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log client = yes [web] accept = 3128 connect = 10.160.1.220:3128 [oracle] accept = 1521 connect = 10.160.1.220:4892 ### Server: cert = stunnel.pem socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [web] accept = 3128 connect = 10.160.0.4:3128 [oracle] accept = 4892 connect = 10.160.1.220:1521 Any good sugestions? Thanks for your answers Regards Robert

1 0

Follow-up: Bad certificate? (was Expired certificate?)
by Boxall, John 11 Jul '06

11 Jul '06

Mike, et al, The problem I was having with stunnel on a Windows box connecting with stunnel on a Unix server (Solaris in this case) turned out to be a mis-configuration of the syslog-ng server on Unix. I took a sample syslog-ng.conf from somewhere else and didn't know the impact of "max-connections(1)". Though I assume it is intended as a limit on the number of connections to the localhost (127.0.0.1:514), it effectively limits the number of in-bound connections from remote logging clients to 1 (in this case using port 5140). Removing this parameter allowed all of my test clients to simultaneously log to the server. Mike, the OpenSSL-generated cert works fine. Thanks. Regards, John Boxall

1 0

libssl.so.0.9.8 error running stunnel
by Michael Tyrrell 10 Jul '06

10 Jul '06

I have a Solaris 10 SPARC server running stunnel 4.15 with openssl version "OpenSSL 0.9.8b 04 May 2006". When I try to run /usr/local/sbin/stunnel I get the following error. ld.so.1: stunnel: fatal: libssl.so.0.9.8: open failed: No such file or directory Killed In the stunnel.conf file I have debug set to 7 but it will not write to the stunnel.log file. I also get the same error if I run stunnel -version. Thanks for any help you could give.

2 1

stunnel and gmail (Windows)
by Al Oomens 08 Jul '06

08 Jul '06

I've gotten an older version of stunnel to work the way I want by starting it from a command prompt like: stunnel -c -d 110 -r pop.gmail.com:995 How do I specify this in the config file for the newest version of stunnel, in order to use it as a service on Windows? -- Al Oomens Wheaton, IL. aloomens(a)gmail.com

2 1

Wildcard outbound IP matching...
by Jeff Roberts 07 Jul '06

07 Jul '06

Is there a way to configure Stunnel to capture outbound packets for *any* IP, but for a specific port? My SMTP server can be configured to connect directly to the final SMTP server. I can configure the outbound port to some other port other than 25, so I'd like to say something like - [smtpclient] protocol=smtp accept = *:2210 connect = *:25 Suggestions? ->Jeff RAD Game Tools

2 1

Bad certificate? (was Expired certificate?)
by Boxall, John 30 Jun '06

30 Jun '06

Mike, I've created a self-signed certificate on my Windows test box using OpenSSL 0.9.7j (the version from Shining Light). I created the key file with the following command: "openssl genrsa 1024 > \host.key Here is the command I used to create the self-signed cert: "openssl req -new -x509 -nodes -sha1 -days 9999 -key \host.key > \host.cert" I then copied the key/cert to the appropriate file in the stunnel directory. I then copied the cert to the Solaris server and included it with all other client certs. Here is the Windows configuration file: ; ;CLIENT-ONLY stunnel configuration file ; client = yes cert = C:\Program Files\stunnel\stunnel.pem-client-certificate CAfile = C:\Program Files\stunnel\stunnel.pem-server-certificate ;chroot = /var/run/stunnel ;pid = /usr/local/var/run/stunnel/stunnel.pid ;setuid = stunnel ;setgid = stunnel verify = 3 ;foreground = yes debug = 7 output = C:\Program Files\stunnel\stunnel.log [5140] accept = 127.0.0.1:514 connect = 172.17.99.143:5140 Here is the Solaris configuration file: ; ;SERVER-ONLY stunnel configuration file ; cert = /usr/local/etc/stunnel/stunnel.pem-server-certificate CAfile = /usr/local/etc/stunnel/stunnel.pem-all-client-certificates ;chroot = /var/run/stunnel ;pid = /var/run/stunnel/run/stunnel.pid ;setuid = stunnel ;setgid = stunnel verify = 3 ;foreground = yes debug = 7 output=/stunnel.log [5140] accept = 172.17.99.143:5140 connect = 127.0.0.1:514 The following happens on the Windows box when I first launch stunnel: 2006.06.30 09:51:31 LOG5[516:360]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.06.30 09:51:31 LOG5[516:360]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.06.30 09:51:31 LOG5[516:392]: No limit detected for the number of clients 2006.06.30 09:51:31 LOG7[516:392]: FD 1904 in non-blocking mode 2006.06.30 09:51:31 LOG7[516:392]: SO_REUSEADDR option set on accept socket 2006.06.30 09:51:31 LOG7[516:392]: 5140 bound to 127.0.0.1:514 Nothing happens on the Solaris box. When I start EventReporter, the following happens, in a continuous loop (until I stop EventReporter): 2006.06.30 10:16:26 LOG7[296:700]: 5140 accepted FD=156 from 127.0.0.1:1154 2006.06.30 10:16:26 LOG7[296:700]: Creating a new thread 2006.06.30 10:16:26 LOG7[296:700]: New thread created 2006.06.30 10:16:27 LOG7[296:1204]: 5140 started 2006.06.30 10:16:27 LOG7[296:1204]: FD 156 in non-blocking mode 2006.06.30 10:16:27 LOG5[296:1204]: 5140 connected from 127.0.0.1:1154 2006.06.30 10:16:27 LOG7[296:1204]: FD 188 in non-blocking mode 2006.06.30 10:16:27 LOG7[296:1204]: 5140 connecting 172.17.99.143:5140 2006.06.30 10:16:27 LOG7[296:1204]: connect_wait: waiting 10 seconds 2006.06.30 10:16:27 LOG7[296:1204]: connect_wait: connected 2006.06.30 10:16:27 LOG7[296:1204]: Remote FD=188 initialized 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): before/connect initialization 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write client hello A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server hello A 2006.06.30 10:16:27 LOG5[296:1204]: VERIFY OK: depth=0, /C=CA/ST=ONTARIO/L=TORONTO/O=BANK OF MONTREAL/OU=LMG-DTS/CN=jdb2u10 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server certificate A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server certificate request A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 read server done A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write client certificate A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write client key exchange A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write certificate verify A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write change cipher spec A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 write finished A 2006.06.30 10:16:27 LOG7[296:1204]: SSL state (connect): SSLv3 flush data 2006.06.30 10:16:27 LOG3[296:1204]: SSL_connect: Peer suddenly disconnected 2006.06.30 10:16:27 LOG5[296:1204]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.06.30 10:16:27 LOG7[296:1204]: 5140 finished (0 left) On the Solaris box, here is the matching entry, also in a continuous loop: 2006.06.30 10:16:47 LOG7[1214:1]: 5140 accepted FD=2 from 172.17.99.150:1155 2006.06.30 10:16:47 LOG7[1214:800]: 5140 started 2006.06.30 10:16:47 LOG7[1214:800]: FD 2 in non-blocking mode 2006.06.30 10:16:47 LOG5[1214:800]: 5140 connected from 172.17.99.150:1155 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): before/accept initialization 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 read client hello A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 write server hello A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 write certificate A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 write certificate request A 2006.06.30 10:16:47 LOG7[1214:800]: SSL state (accept): SSLv3 flush data 2006.06.30 10:16:48 LOG4[1214:800]: VERIFY ERROR: depth=0, error=self signed certificate: /C=CA/ST=ONTARIO/L=TORONTO/O=BMO/OU=LMG-DTS/CN=jdb1winxp 2006.06.30 10:16:48 LOG7[1214:800]: SSL alert (write): fatal: bad certificate 2006.06.30 10:16:48 LOG3[1214:800]: SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned 2006.06.30 10:16:48 LOG5[1214:800]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.06.30 10:16:48 LOG7[1214:800]: 5140 finished (1 left) It appears the server cert is ok, but "something" is wrong with the client (Windows box) cert. Any chance you could post the command used in the "make install" to kick off the creation of the self-signed cert on Unix? I grep'd for it, but couldn't find it. Regards, John Boxall

1 0

Stunnel 4.15 cannot handle PKCS8 format private keys
by David Gillingham 29 Jun '06

29 Jun '06

In modifying stunnel to work with the OpenSSL FIPS-certified module, I found out that private keys cannot be in the default OpenSSL format; they must be in PKCS8 format (due to the MD5 algorithm being disabled in FIPS mode). Talking to Dr. Henson of the OpenSSL group I was able to convert my private keys from the default format to PKCS8, but I found that stunnel was not able to handle these keys. I got the following error output (note that server.pem contains a PKCS8 private key and a PKCS7 public cert): 2006.06.08 17:49:38 LOG7[1120:616]: Certificate: server.pem 2006.06.08 17:49:38 LOG7[1120:616]: Key file: server.pem 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 906700D : error:0906700D:PEM routines:PEM_ASN1_read_bio:ASN1 lib 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 2306A075 : error:2306A075:PKCS12 routines:PKCS12_DECRYPT_D2I:pkcs12 pbe crypt error 2006.06.08 17:49:42 LOG3[1120:616]: error stack: 23077073 : error:23077073:PKCS12 routines:PKCS12_pbe_crypt:pkcs12 algor cipherinit error 2006.06.08 17:49:42 LOG3[1120:616]: SSL_CTX_use_RSAPrivateKey_file: 6074079: error:06074079:digital envelope routines:EVP_PBE_CipherInit:unknown pbe algorithm 2006.06.08 17:49:42 LOG3[1120:616]: Server is down Continuing with Dr. Henson, he informed me that this ssl error output meant that "the PBE table has not been initialized in the application". I corrected this by adding a call to OpenSSL_add_all_algorithms() into ssl_init() in ssl.c. This fixed my error with the PEM files. I am posting this so that this bug may be fixed for the next stunnel release. Additionally, I'd like verification that my fix makes sense given the structure of the stunnel code. From doing some searches in the stunnel source, I could not find any existing code that initialized the PBE table so adding the call to ssl_init() made sense _to me_. Michal: do you agree?

2 1

Expired certificate?
by Boxall, John 29 Jun '06

29 Jun '06

Michal, et al, When attempting to connect from a Windows box to a Solaris box (as the server), the Solaris stunnel log (debug = 7) shows that the certificate on the Windows box (included with the download) has expired. I can connect from a Solaris 9 client box with no problems. The Solaris box is running as an NTP client to an internal NTP server. The Windows box isn't logged into a domain, but the time is within 5 minutes of the Solaris box. Solaris server: Solaris 9 (2004/09, no patches) OpenSSL 0.9.8a Stunnel 4.15 Application: Syslog-ng 1.6.11 (working fine on a client Solaris 9 box) Windows client: Windows XP Stunnel 4.15 Application: EventReporter 8.0.268/8.0.219 stunnel.conf: (borrowed and modified from a Solaris client box) ; ;CLIENT-ONLY stunnel configuration file ; client = yes cert = C:\Program Files\stunnel\stunnel.pem-client-certificate CAfile = C:\Program Files\stunnel\stunnel.pem-server-certificate ;chroot = /var/run/stunnel ;pid = /usr/local/var/run/stunnel/stunnel.pid ;setuid = stunnel ;setgid = stunnel verify = 3 ;foreground = yes debug = 7 output = C:\Program Files\stunnel\stunnel.log [5140] accept = 127.0.0.1:514 connect = 192.168.0.143:5140 If the certificate has truly expired, could you post a new one? If not, any suggestions? Regards, John Boxall

2 1

Re: [stunnel-users] patch to build stunnel 4.15 with VS2005
by David Gillingham 29 Jun '06

29 Jun '06

Surely. Here are the contents of the patch file for vs.mak. >cat 4.15-MSVC2005.patch diff -cr stunnel-4.15-orig/src/vc.mak stunnel-4.15/src/vc.mak *** stunnel-4.15-orig/src/vc.mak Sat Jan 21 10:17:32 2006 --- stunnel-4.15/src/vc.mak Thu Jun 29 17:31:43 2006 *************** *** 1,2 **** ! # makefile for VC is not ready... --- 1,42 ---- ! # Simple Makefile.w32 for stunnel.exe by Michal Trojnara 1998-2006 ! # ! # Modified by David Gillingham (dgillingham(a)gmail.com) for Visual ! # Studio + # Modify this to point to your actual openssl compile directory + # (You did already compile openssl, didn't you???) + SSLDIR=..\openssl-0.9.7j + + OBJS=stunnel.obj ssl.obj ctx.obj file.obj client.obj protocol.obj \ + sthreads.obj log.obj options.obj network.obj resolver.obj \ + gui.obj + + CC=cl + CFLAGS=-MD -W3 -Ox -O2 -Ob2 -Gs0 -GF -Gy -GL -nologo \ + -I"$(SSLDIR)\inc32" $(DEFINES) + DEFINES=-DUSE_WIN32 -D_CRT_SECURE_NO_DEPRECATE \ + -D_CRT_NONSTDC_NO_DEPRECATE -DHAVE_GETADDRINFO \ + -DHAVE_GETNAMEINFO -D_MBCS + + LINK=link + LDFLAGS=-INCREMENTAL:NO -NOLOGO -SUBSYSTEM:WINDOWS -OPT:REF \ + -OPT:ICF -LTCG -MACHINE:X86 -ERRORREPORT:PROMPT + LIBS=-LIBPATH:"$(SSLDIR)\out32dll" wsock32.lib ssleay32.lib \ + libeay32.lib user32.lib gdi32.lib shell32.lib comdlg32.lib \ + advapi32.lib + + all: stunnel.exe + + clean: + del $(OBJS) resources.res + del *.manifest + del stunnel.exe + + stunnel.exe: $(OBJS) resources.res + $(LINK) $(LDFLAGS) $(LIBS) -OUT:$@ $** + IF EXIST $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 + + resources.res: resources.rc resources.h stunnel.ico + rc -fo $@ resources.rc + + $(OBJS): *.h vc.mak On 6/29/06, Michal Trojnara <Michal.Trojnara(a)mobi-com.net> wrote: > > That's possible. Could you prepare a patch with a minimal set of > changes (not including anything needed to build those Unix-specific files?).

1 0

patch to build stunnel 4.15 with VS2005
by David Gillingham 29 Jun '06

29 Jun '06

All-- I have created a patch that will allow stunnel 4.15 to be built with Visual Studio 2005's command line environment. I have only tested it with VS2k5, but it should work for all Visual Studio .NET versions (that is, VS 7.0 or later). After you apply this patch to the source tree, you will need to run the makefile from a Visual Studio Command prompt (Start->Programs->Visual Studio->Visual Studio Tools->Visual Studio Command Prompt). From there, change the working directory to the stunnel\src folder and execute the command "nmake -f vs.mak all". After the build process has completed, you will have a working stunnel.exe. This patch will modify vc.mak to a working makefile for nmake (mimicing the basic structure of mingw.mak), common.h to include a couple missing headers for the I/O functions in pty.c, and env.c to include the winsock headers under the Win32 environment (replicating how it was done in common.h). This patch that is a result of internal testing/development I've done here at work and am releasing it to this list (and the stunnel developers) so that these changes could possibly be included in future stunnel releases. To the stunnel devs: if there's any additional work that can be done to get this integrated by the next release, just mention it. The other day, I tried sending the patch to the list as an attachment, but my message never showed up on either the mirt.net or google groups mirrors. I can only assume it was rejected because of the attachment. What follows is the full text of my patch file. > cat 4.15-MSVC2005.patch diff -cr stunnel-4.15-orig/src/common.h stunnel-4.15/src/common.h *** stunnel-4.15-orig/src/common.h Fri Mar 10 08:54:56 2006 --- stunnel-4.15/src/common.h Fri Jun 23 21:41:00 2006 *************** *** 153,158 **** --- 153,164 ---- #endif #include <windows.h> + /* include Visual Studio headers needed for I/O manipulation */ + #ifdef _MSC_VER + #include <io.h> + #include <fcntl.h> + #endif + #define ECONNRESET WSAECONNRESET #define ENOTSOCK WSAENOTSOCK #define ENOPROTOOPT WSAENOPROTOOPT diff -cr stunnel-4.15-orig/src/env.c stunnel-4.15/src/env.c *** stunnel-4.15-orig/src/env.c Sat Jan 7 13:47:36 2006 --- stunnel-4.15/src/env.c Mon Jun 26 21:11:25 2006 *************** *** 31,45 **** /* getpeername() can't be declared in the following includes */ #define getpeername no_getpeername #include <sys/types.h> #include <sys/socket.h> /* for AF_INET */ #include <netinet/in.h> #include <arpa/inet.h> /* for inet_addr() */ #include <stdlib.h> /* for getenv() */ #ifdef __BEOS__ #include <be/bone/arpa/inet.h> /* for AF_INET */ #include <be/bone/sys/socket.h> /* for AF_INET */ - #else - #include <sys/socket.h> /* for AF_INET */ #endif #undef getpeername --- 31,52 ---- /* getpeername() can't be declared in the following includes */ #define getpeername no_getpeername #include <sys/types.h> + #ifdef USE_WIN32 + #ifdef _WIN32_WCE + #include <winsock.h> + #else + #include <winsock2.h> + #include <ws2tcpip.h> + #endif /* _WIN32_WCE */ + #else /* USE_WIN32 */ #include <sys/socket.h> /* for AF_INET */ #include <netinet/in.h> #include <arpa/inet.h> /* for inet_addr() */ + #endif /* USE_WIN32 */ #include <stdlib.h> /* for getenv() */ #ifdef __BEOS__ #include <be/bone/arpa/inet.h> /* for AF_INET */ #include <be/bone/sys/socket.h> /* for AF_INET */ #endif #undef getpeername diff -cr stunnel-4.15-orig/src/vc.mak stunnel-4.15/src/vc.mak *** stunnel-4.15-orig/src/vc.mak Sat Jan 21 10:17:32 2006 --- stunnel-4.15/src/vc.mak Tue Jun 27 21:02:15 2006 *************** *** 1,2 **** ! # makefile for VC is not ready... --- 1,45 ---- ! # Simple Makefile.w32 for stunnel.exe by Michal Trojnara 1998-2006 ! # ! # Modified by David Gillingham (dgillingham(a)gmail.com) for Visual ! # Studio ! ! # Modify this to point to your actual openssl compile directory ! # (You did already compile openssl, didn't you???) ! SSLDIR=..\..\openssl-0.9.7j ! ! DEFINES=-DUSE_WIN32 -D_CRT_SECURE_NO_DEPRECATE \ ! -D_CRT_NONSTDC_NO_DEPRECATE -DHAVE_GETADDRINFO \ ! -DHAVE_GETNAMEINFO -D_MBCS ! CC=cl ! CFLAGS=-MD -W3 -Ox -O2 -Ob2 -Gs0 -GF -Gy -GL -nologo \ ! -I"$(SSLDIR)\inc32" $(DEFINES) ! ! LINK=link ! LDFLAGS=-INCREMENTAL:NO -NOLOGO -SUBSYSTEM:WINDOWS -OPT:REF \ ! -OPT:ICF -LTCG -MACHINE:X86 -ERRORREPORT:PROMPT ! LIBS=-LIBPATH:"$(SSLDIR)\out32dll" wsock32.lib ssleay32.lib \ ! libeay32.lib user32.lib gdi32.lib shell32.lib comdlg32.lib \ ! advapi32.lib ! ! OBJS=stunnel.obj ssl.obj ctx.obj file.obj client.obj protocol.obj \ ! sthreads.obj log.obj options.obj network.obj resolver.obj \ ! gui.obj ! ! ! all: stunnel.exe ! ! clean: ! del $(OBJS) resources.res ! del *.manifest ! del stunnel.exe ! ! stunnel.exe: $(OBJS) resources.res ! $(LINK) $(LDFLAGS) $(LIBS) -OUT:$@ $** ! IF EXIST $@.manifest mt -manifest $@.manifest -outputresource:$@;1 ! ! resources.res: resources.rc resources.h stunnel.ico ! rc /fo $@ resources.rc ! ! $(OBJS): $*.c *.h ! $(CC) $(CFLAGS) -c $*.c

2 1

stunnel in proxy mode won't start
by Dave Hinz 28 Jun '06

28 Jun '06

I'm trying to run stunnel in proxy mode, to accept connections on port 443, and forward them to an application listening at port 9999 on the same box. I believe I have the configuration correct, but I'm obviously overlooking something. Environment: stunnel 4.15 on sparc-sun-solaris2.9 with OpenSSL 0.9.7g 11 Apr 2005 I have built an stunnel.conf file, and a stunnel.pem file which are located in the correct place with the right permissions. I verified that by moving or changing permissions and seeing that errors were produced. I've changed the debug level to 7, and the following information is displayed when I try to start stunnel: cert# stunnel 2006.06.28 13:01:14 LOG7[9088:1]: Snagged 64 random bytes from /users/dave/.rnd 2006.06.28 13:01:14 LOG7[9088:1]: Wrote 1024 new random bytes to /users/dave/.rnd 2006.06.28 13:01:14 LOG7[9088:1]: RAND_status claims sufficient entropy for the PRNG 2006.06.28 13:01:14 LOG6[9088:1]: PRNG seeded successfully 2006.06.28 13:01:14 LOG7[9088:1]: Certificate: /usr/local/etc/stunnel/stunnel.pem 2006.06.28 13:01:14 LOG7[9088:1]: Key file: /usr/local/etc/stunnel/stunnel.pem 2006.06.28 13:01:14 LOG7[9088:1]: Verify directory set to / 2006.06.28 13:01:14 LOG5[9088:1]: Peer certificate location / 2006.06.28 13:01:14 LOG7[9088:1]: SSL context initialized for service test cert# Same thing if I run it as stunnel stunnel.conf -fd The prompt comes back immediately, ps -ef shows no stunnel running, and nothing is answering on port 443 which is where I'm telling it to listen: stunnel.conf file: cert = /usr/local/etc/stunnel/stunnel.pem chroot = /usr/local/etc/stunnel # PID is created inside chroot jail pid = /pid/stunnel.pid #setuid = nobody #setgid = nogroup # Authentication stuff verify = 3 # don't forget about c_rehash CApath # it is located inside chroot jail: CApath = / # Some debugging stuff debug = 7 output = stunnel.log # Use it for client mode client = no # Service-level configuration [test] accept = 127.0.0.1:443 connect = 127.0.0.1:9999 #TIMEOUTclose = 0 ---end stunnel.conf file--- The pem files are located in the same directory as the stunnel.conf, hence the "/" for the pathname above. What am I overlooking please?

1 0

stunnel.cfg file
by Dheeraj Sehrawat 28 Jun '06

28 Jun '06

Hi All, I am looking at a problem and found the system is using stunnel with web server. From my google search I have understood that stunnel is used to make the application SSL enable. Please validate my understanding. I found following stunnel.cfg file in properties directory Port0 Enabled=0 ExternalPort=0 LocalPort=0 SSLEnabled=0 UDP=0 Port1 Enabled=1 ExternalPort=1500 LocalPort=10080 SSLEnabled=0 Port2 Enabled=0 ExternalPort=1600 LocalPort=10080 SSLEnabled=1 ------------------------------------------------------ I have the following questions: 1] what is the meaning of ExternalPort and LocalPort ? How does these ports relate with each other? Please help me in understanding this configuration file. Thanks, Dheeraj __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

Re: enabling zlib compression
by ahall＠madasafish.com 27 Jun '06

27 Jun '06

I'd really like to get this working, but I'm not sure what other information you require? All other posts on this subject refer to making sure zlib is included when openssl is compiled. Well, I've confirmed that it is. Would a strace of stunnel attempting to start up help? FYI - The output of stunnel -version displays... stunnel 4.15 on i686-pc-linux-gnu with OpenSSL 0.9.7a Feb 19 2003 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Auth:LIBWRAP Could someone please provide me with some suggestions. Thanks very much. On Mon, 26 Jun 2006 13:09:36 , <ahall(a)madasafish.com> sent: >OK - after checking the OpenSSL src-rpm I can confirm that zlib is compiled... > >./Configure \ > --prefix=%{_prefix} --openssldir=%{_datadir}/ssl ${sslflags} \ > zlib no-idea no-mdc2 no-rc5 no-ec shared \ > --with-krb5-flavor=MIT \ > -I%{_prefix}/kerberos/include -L%{_prefix}/kerberos/%{_lib} \ > ${sslarch} > >Any ideas why the "compression=zlib" option still produces the "Failed to add >zlib compression method" error? > >Thanks very much. > > >>On Fri, 23 Jun 2006 17:01:24 , ahall(a)madasafish.com> sent: >> >>>Hi there, >>> >>>When I try to enable zlib compression at the server I get this error when >>>starting it up... >>> >>>2006.06.23 15:44:39 LOG3[3426:3086293504]: Failed to add zlib compression method >>> >>>How do I get zlib to work? Do I need to compile OpenSSL with zlib? >>> >>>I'm using Fedora Core 3 with stunnel-4.15, and OpenSSL and zlib are from RPM's. >>> >>>Thanks very much. > >---- - Madasafish - Voted Best Heavy Consumer Broadband Provider in the 2006 Internet Industry Awards http://www.madasafish.com/ ---- - Madasafish - Voted Best Heavy Consumer Broadband Provider in the 2006 Internet Industry Awards http://www.madasafish.com/

1 0

Patch to fix compile errors under MS Visual C++ 2005
by David Gillingham 26 Jun '06

26 Jun '06

Attached is a patch for stunnel 4.15 that allows the source to be built under Microsoft Visual Studio 2005. Here's a rundown of what's been changed: In common.h, I included io.h and fcntl.h so that pty.c would build without error. In env.c, I included the winsock headers (replicating how it was done for common.h), and removed a duplicate include of sys/socket.h. The latter change wasn't necessary for compiliation with MSVC, but I thought I'd remove what looked like an unncessary line. To get stunnel to build without warning, I defined the following preprocessor definitions: USE_WIN32 _CRT_SECURE_NO_DEPRECATE _CRT_NONSTDC_NO_DEPRECATE HAVE_GETADDRINFO HAVE_GETNAMEINFO _MBCS Later in the week, I'll post a patch to vs.mak to automate the build process (I'm still building with a solution file at the moment). To the stunnel developers: If there's anything extra I can do to ensure these changes are incorporated into the next release, please let me know.

1 0

Re: enabling zlib compression
by ahall＠madasafish.com 26 Jun '06

26 Jun '06

OK - after checking the OpenSSL src-rpm I can confirm that zlib is compiled... ./Configure \ --prefix=%{_prefix} --openssldir=%{_datadir}/ssl ${sslflags} \ zlib no-idea no-mdc2 no-rc5 no-ec shared \ --with-krb5-flavor=MIT \ -I%{_prefix}/kerberos/include -L%{_prefix}/kerberos/%{_lib} \ ${sslarch} Any ideas why the "compression=zlib" option still produces the "Failed to add zlib compression method" error? Thanks very much. >On Fri, 23 Jun 2006 17:01:24 , ahall(a)madasafish.com> sent: > >>Hi there, >> >>When I try to enable zlib compression at the server I get this error when >>starting it up... >> >>2006.06.23 15:44:39 LOG3[3426:3086293504]: Failed to add zlib compression method >> >>How do I get zlib to work? Do I need to compile OpenSSL with zlib? >> >>I'm using Fedora Core 3 with stunnel-4.15, and OpenSSL and zlib are from RPM's. >> >>Thanks very much. ---- - Madasafish - Voted Best Heavy Consumer Broadband Provider in the 2006 Internet Industry Awards http://www.madasafish.com/

1 0

Re: enabling zlib compression
by ahall＠madasafish.com 26 Jun '06

26 Jun '06

I have checked the OpenSSL INSTALL file and zlib /should/ be enabled by default... zlib-dynamic Like "zlib", but has OpenSSL load the zlib library dynamically when needed. This is only supported on systems where loading of shared libraries is supported. This is the default choice. If I can assume that Linux supports the loading of shared libraries, then can someone please help me to get zlib compression working over the stunnel. Thanks very much. On Fri, 23 Jun 2006 17:01:24 , <ahall(a)madasafish.com> sent: >Hi there, > >When I try to enable zlib compression at the server I get this error when >starting it up... > >2006.06.23 15:44:39 LOG3[3426:3086293504]: Failed to add zlib compression method > >How do I get zlib to work? Do I need to compile OpenSSL with zlib? > >I'm using Fedora Core 3 with stunnel-4.15, and OpenSSL and zlib are from RPM's. > >Thanks very much. > >---- - Madasafish - Voted Best Heavy Consumer Broadband Provider in the 2006 Internet Industry Awards http://www.madasafish.com/ ---- - Madasafish - Voted Best Heavy Consumer Broadband Provider in the 2006 Internet Industry Awards http://www.madasafish.com/

1 0

Solaris9/Sparc runtime library problems
by Dave Hinz 23 Jun '06

23 Jun '06

This is probably a very basic problem, but I've checked the FAQ and googled through the mailing list's archives and I'm not seeing what appears to be a match for this problem. I'm completely new to stunnel. It built and runs just fine on one of my linux dev boxes, but on Solaris, I can't get it to run. Attempting to run /usr/local/sbin/stunnel, I get the following: ---begin output--- jabba% ./stunnel ld.so.1: ./stunnel: fatal: libssl.so.0.9.7: open failed: No such file or directory Killed ---end output--- The various debug switches to stunnel give the same output - it's dying before anything can be started, apparently. libssl.so.0.9.7 is located on that box at /usr/local/ssl/lib/libssl.so.0.9.7and other ssl functions of the system appear to work normally. I suspect that stunnel just doesn't know how to find it, but I'm at a loss as to how to tell it where to look. Can someone suggest my next steps please? Thank you, Dave Hinz

2 1

Patch for stunnel 4.15 to support pgsql protocol
by Peter Kuma 23 Jun '06

23 Jun '06

Hi I've written a short patch for stunnel 4.15 adding support for PostgreSQL SSL negotiation. I hope it'll be useful. http://vcielka.rec.uniba.sk/~peter/stunnel-pgsql.patch PostgreSQL documentation explaining how to establish SSL connection: http://www.postgresql.org/docs/8.1/interactive/protocol-flow.html#AEN60652 http://www.postgresql.org/docs/8.1/interactive/protocol-message-formats.html Regards Peter Kuma

1 0

enabling zlib compression
by ahall＠madasafish.com 23 Jun '06

23 Jun '06

Hi there, When I try to enable zlib compression at the server I get this error when starting it up... 2006.06.23 15:44:39 LOG3[3426:3086293504]: Failed to add zlib compression method How do I get zlib to work? Do I need to compile OpenSSL with zlib? I'm using Fedora Core 3 with stunnel-4.15, and OpenSSL and zlib are from RPM's. Thanks very much. ---- - Madasafish - Voted Best Heavy Consumer Broadband Provider in the 2006 Internet Industry Awards http://www.madasafish.com/

1 0

Re: CRLPath not working (Michal Trojnara)
by Nagasundaram, Sekhar 15 Jun '06

15 Jun '06

Michael: We will give this also a shot. The workaround worked however. Much thanks Sekhar ---------------- Message: 4 Date: Tue, 13 Jun 2006 23:44:50 +0200 From: Michal Trojnara <Michal.Trojnara(a)mobi-com.net> Subject: Re: [stunnel-users] CRLPath not working To: stunnel-users(a)mirt.net Message-ID: <200606132344.53413.Michal.Trojnara(a)mobi-com.net> Content-Type: text/plain; charset="utf-8" On Tuesday 13 June 2006 02:14, Nagasundaram, Sekhar wrote: > Here are the configuration and the log files as you requested.... Thank you. Please try the following change: --- ctx.old 2006-06-13 23:33:29.000000000 +0200 +++ ctx.c 2006-06-13 23:35:33.000000000 +0200 @@ -460,6 +460,7 @@ s_log(LOG_DEBUG, "Loaded CRLs from %s", section->crl_file); } if(section->crl_dir) { + section->revocation_store->cache=0; lookup=X509_STORE_add_lookup(section->revocation_store, X509_LOOKUP_hash_dir()); if(!lookup) { BTW: Did my workaround work? Best regards, Mike

1 0

RE: [stunnel-users] Is there a limit to the number of services youcanhave defined on a client?
by Lund, Claus 14 Jun '06

14 Jun '06

Well, we need about 100+ in our current environment. So how about increasing it to maybe 256? -Claus -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: Wednesday, June 14, 2006 4:23 PM To: <stunnel-users(a)mirt.net> <stunnel-users(a)mirt.net> Subject: Re: [stunnel-users] Is there a limit to the number of services youcanhave defined on a client? On 2006-06-14, at 22:18, Lund, Claus wrote: > Any chance the default could be increased? Really, what's 4MB of RAM > between friends (for the example in your answer)? :-) Okay. What value do you recommend? > And maybe implement an error/warning message when the limit is > exceeded? Good idea. I'll do it. Best regards, Mike _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

RE: [stunnel-users] Is there a limit to the number of services youcan have defined on a client?
by Lund, Claus 14 Jun '06

14 Jun '06

Thanks Mike. Any chance the default could be increased? Really, what's 4MB of RAM between friends (for the example in your answer)? :-) And maybe implement an error/warning message when the limit is exceeded? -Claus -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: Wednesday, June 14, 2006 4:11 PM To: <stunnel-users(a)mirt.net> <stunnel-users(a)mirt.net> Subject: Re: [stunnel-users] Is there a limit to the number of services youcan have defined on a client? On 2006-06-14, at 21:20, Lund, Claus wrote: > I ran > some quick tests and it looks like it's impossible to have more than > 64 services defined? Here is your answer: http://stunnel.mirt.net/pipermail/stunnel-users/2006-April/001099.html Best regards, Mike _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

Is there a limit to the number of services you can have defined on a client?
by Lund, Claus 14 Jun '06

14 Jun '06

We have a bunch of middle-tier servers for an application and we're using stunnel to encrypt the traffic between the windows clients and those middle-tier servers. The clients have stunnel.conf files with a large number of services defined and it seems like we're hitting some limit in stunnel. I ran some quick tests and it looks like it's impossible to have more than 64 services defined? If I have a config file with about 100 services defined then everything works fine up until I try to connect to service number 65. When I try to connect to that service then the client just hangs forever (and there's no output in the log file on the client). We are using version 4.14 but I tested this on 4.15 as well and I am getting the same result there. Here's a piece of the config file I am using for testing: "client = yes ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log [blah] accept = 13806 connect = tax187a:13806 [blah1] accept = 13807 connect = tax187a:13806" Then followed by blah2 - blah100. Things work fine when connect to "blah63" and lower. Anything higher than that cause the stunnel client to just hang. Thank you in advance, Claus ____________________________________________ Claus Lund Systems Developer NEW EMAIL ADDRESS: Claus.Lund(a)state.vt.us Department of Taxes Information Systems 133 State Street Montpelier, Vermont 05633-1401 (802) 828-3735

2 1

CRLPath not working
by Nagasundaram, Sekhar 13 Jun '06

13 Jun '06

Mike: Here are the configuration and the log files as you requested.... ---------------------------------------------BEGIN CONFIG --------------------------------- # switch-simulator stunnel configuration file # Copyright by Michal Trojnara 2002 # Certs and keys cert = /etc/certs/demoedge2-cert.pem key = /etc/keys/demoedge2-key.pem # PID is created inside chroot jail pid = /var/opt/stunnel/stunnel_server.pid # Authentication stuff verify = 2 options = NO_SSLv2 # don't forget about c_rehash CApath # it is located inside chroot jail: CApath = /etc/CApath # CRL path or file (inside chroot jail): CRLpath = /etc/crl # Some debugging stuff debug = local4.5 output = /var/opt/log/pras_test_server.log # Use it for client mode #client = no # Service-level configuration [APF] accept = 10.172.86.128:51101 connect = 127.0.0.1:50111 ----------------------------------------------END CONFIG ---------------------------------- --------------------------------------------- BEGIN LOG FILE ------------------------------- 2006.06.11 19:27:25 LOG5[8839:7]: CA CRL: Issuer: /C=US/O=VISA CRL ISSUER>, lastUpdate: Jun 9 07:00:02 2006 GMT, nextUpdate: Jun 10 08:00:02 2006 GMT 2006.06.11 19:27:25 LOG4[8839:7]: Found CRL is expired - revoking all certificates until you get updated CRL 2006.06.11 19:27:25 LOG3[8839:7]: SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned 2006.06.11 19:27:25 LOG5[8839:7]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.06.12 17:41:52 LOG5[8839:8]: APF connected from 10.172.86.96:35225 2006.06.12 17:41:52 LOG5[8839:8]: VERIFY OK: depth=2, /C=US/O=VISA/OU=Visa International Service Association/CN=TEST Visa Info Delivery Root CA 2006.06.12 17:41:52 LOG5[8839:8]: CA CRL: Issuer: /C=US/O=VISA CRL ISSUER>, , lastUpdate: Jun 9 07:00:02 2006 GMT, nextUpdate: Jun 10 08:00:02 2006 GMT 2006.06.12 17:41:52 LOG4[8839:8]: Found CRL is expired - revoking all certificates until you get updated CRL 2006.06.12 17:41:52 LOG3[8839:8]: SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned 2006.06.12 17:41:52 LOG5[8839:8]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.06.12 23:01:08 LOG5[8839:9]: APF connected from 10.172.86.96:35371 2006.06.12 23:01:08 LOG5[8839:9]: VERIFY OK: depth=2, <VISA CA> 2006.06.12 23:01:08 LOG5[8839:9]: CA CRL: Issuer: /C=US/O=VISA CRL ISSUER>, lastUpdate: Jun 9 07:00:02 2006 GMT, nextUpdate: Jun 10 08:00:02 2006 GMT 2006.06.12 23:01:08 LOG4[8839:9]: Found CRL is expired - revoking all certificates until you get updated CRL 2006.06.12 23:01:08 LOG3[8839:9]: SSL_accept: 140890B2: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned 2006.06.12 23:01:08 LOG5[8839:9]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket ------------------------------------------- END LOG FILE -------------------------------------- On 2006-06-12, at 22:17, Nagasundaram, Sekhar wrote: > We download crls everyday from a CRL server using LDAP and a cronjob. > These CRLs are stored in the CRLpath directory along with its hash. > It appears that the stunnel is not refreshing its cache, and it > still shows "Found CRL is expired - revoking all certificates until > you get updated CRL" when we try to connect to it even though there is > a > New and valid CRL in the CRLPath folder. Is there a special option > In Stunnel configuration for it to recognize/cache/add the new hash > file Just to make sure: the problem disappears after restarting stunnel, right? The simple workaround could be disabling all SSL caches: ./configure --with-threads=fork make clean make make install Can you send your stunnel.conf and debug log? TIA, Mike Sekhar Nagasundaram <<Nagasundaram, Sekhar.vcf>>

2 1

Modifying STunnel to use OpenSSL FIPS
by David Gillingham 13 Jun '06

13 Jun '06

As part of an internal project at work, I'm investigating a Windows tunneling solution using STunnel. As a requirement of my work, I am to modify STunnel to use OpenSSL's FIPS APIs. And, with only a couple of speedbumps, I was able to achieve this. However I'd like to make my code a little more robust--to provide some notification to the user if OpenSSL's FIPS mode is active or not. To this point I've not been able to figure out a way to do this. In my copy of the STunnel source, I've modified the routine ssl_init() in ssl.c to make a call to FIPS_mode_set(1) (as demonstrated on page 33 of http://www.openssl.org/docs/fips/UserGuide-1.0.pdf). Below is a copy of my current copy of ssl_init(): void ssl_init(void) { /* to keep CLI structure for verify callback */ #if defined(OPENSSL_FIPS) && defined(USE_FIPS) if (!FIPS_mode_set(1)) { s_log(LOG_CRIT, "Could not set FIPS mdoe!"); } else { s_log(LOG_INFO, "In FIPS mode."); } #endif /* rest of ssl_init() from original source */ } As I've found out, the s_log calls do nothing because the STunnel window has not been displayed yet. Ideally, in the case where the FIPS_mode_set() call fails, I'd like to invoke an error handler to cause the STunnel service to fail to start. But trying to make a call to something like sslerror() caused a program crash. Any ideas on how to make these changes?

2 3

RE: [stunnel-users] socket closed after SSL_write
by Srilalitha Muralidhara(HCL Capital Market Services) 13 Jun '06

13 Jun '06

Thanks Michal. How do I disable the socket from sending TCP RST and instead make it send TCP FIN? It might be a very basic question. Sorry about that. Thanks Sri Srilalitha Muralidhara Rates IT Report Server HCL Capital Market Services ( 91.80.4190.6689 + 33/1,The Senate, Ulsoor Road, Bangalore. India. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: Monday, June 12, 2006 11:08 PM To: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] socket closed after SSL_write On Monday 12 June 2006 12:01, Srilalitha Muralidhara wrote: > 2006.06.12 10:47:45 LOG7[19699:28]: SSL alert (write): warning: close > notify Clean SSL shutdown alert was received. > 2006.06.12 10:47:50 LOG3[19699:28]: SSL_read: Connection reset by peer > (131) ... and then TCP RST! Strange. It looks like your application has set SO_LINGER option on its socket, so it sends TCP RST instead of TCP FIN packet. Best regards, Mike Disclaimer: *********** The contents of this E-mail (including the contents of the enclosure(s) or attachment(s) if any) are privileged and confidential material of HCL Capital Market Services and should not be disclosed to, used by or copied in any manner by anyone other than the intended addressee(s). In case you are not the desired addressee, you should delete this message and/or re-direct it to the sender. The views expressed in this E-mail message (including the enclosure(s) or attachment(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of HCL Capital Market Services. This e-mail message including attachment/(s), if any, is believed to be free of any virus. However, it is the responsibility of the recipient to ensure that it is virus free and HCL Capital Market Services is not responsible for any loss or damage arising in any way from its use.

2 1

CRLPath not working
by Nagasundaram, Sekhar 12 Jun '06

12 Jun '06

All: We download crls everyday from a CRL server using LDAP and a cronjob. These CRLs are stored in the CRLpath directory along with its hash. It appears that the stunnel is not refreshing its cache, and it still shows "Found CRL is expired - revoking all certificates until you get updated CRL" when we try to connect to it even though there is a New and valid CRL in the CRLPath folder. Is there a special option In Stunnel configuration for it to recognize/cache/add the new hash file All help is appreciated. Thanks Sekhar

2 1

Re: [stunnel-users] Comparing with BarracudaDrive and Proxytunnel
by Michal Trojnara 12 Jun '06

12 Jun '06

On 2006-06-11, at 21:39, http s wrote: > I am curious if anyone has made a comparison of Stunnel with the > BarracudaDrive HTTPS tunnel and/or Proxytunnel? > > http://barracudaserver.com/examples/BarracudaDrive/HttpsTunnel/ > index.html 1. BarracudaDrive is *not* a free software (even though its home page claims so). See http://www.gnu.org/philosophy/free-sw.html for details. 2. It only works on Windows, Linux, QNX and Mac OS X. Compare it to the list on http://stunnel.mirt.net/. 3. BarracudaDrive is designed to be used for file transfer, while stunnel is a universal tool for encrypting TCP streams. As the result stunnel is much more flexible, but it won't perform any file transfer by itself. > http://proxytunnel.sourceforge.net 1. It's not really an encryption tool, but rather an extension for OpenSSH client. It has some optional basic SSL code (as for version 1.6.0), but it's currently broken. The code incorrectly assumes that SSL_read() only needs to read from a file descriptor and SSL_write() only needs to wrote to a file descriptor. 2. Proxytunnel supports NTLM authentication that is not currently supported by stunnel. 3. It looks like an interesting addition to stunnel on a Unix platform. The client configuration should be something like: [Proxytunnel] client = yes accept = 12345 exec = /path/to/proxytunnel execargs = proxytunnel -p proxy:8080 -u user -s pass -d mybox.athome.nl:443 4. Optional use of stunnel is recommended in README file of Proxytunnel 1.6.0. 8-) Best regards, Mike

1 0

socket closed after SSL_write
by Srilalitha Muralidhara(HCL Capital Market Services) 12 Jun '06

12 Jun '06

Hi, I work on a client-server application that needs to be supported on both UNIX and windows platforms. Currently, we keep one socket open for all communication from client to server (during which many read-write operations take place) For user authentication and security purposes, we are planning to implement SSL-Stunnel. I have developed a small ssl client (based on sclient.c example) which connects to the Stunnel Server. Upon the first SSL_write, SSL is closing the underlying socket. Hence the contents written by subsequent SSL_write operations are not visible in the server log. I saw lot of posts on the same problem. But couldn't find the solution. Any help is greatly appreciated. Please note that: 1. Due platform independency issues, I use RWSocket (a Roguewave library class) instead of the BSD socket in conjunction with SSL. A potion of stunnel server log 2006.06.12 10:47:43 LOG7[19699:28]: FD 1 in non-blocking mode 2006.06.12 10:47:43 LOG7[19699:28]: rssvr connecting 127.0.0.1:28091 2006.06.12 10:47:43 LOG7[19699:28]: Remote FD=1 initialized 2006.06.12 10:47:43 LOG7[19699:28]: TCP_NODELAY option set on remote socket 2006.06.12 10:47:45 LOG7[19699:28]: Socket closed on read 2006.06.12 10:47:45 LOG7[19699:28]: SSL write shutdown 2006.06.12 10:47:45 LOG7[19699:28]: SSL alert (write): warning: close notify 2006.06.12 10:47:45 LOG7[19699:28]: SSL_shutdown retrying 2006.06.12 10:47:45 LOG7[19699:28]: SSL doesn't need to read or write 2006.06.12 10:47:50 LOG3[19699:28]: SSL_read: Connection reset by peer (131) 2006.06.12 10:47:50 LOG5[19699:28]: Connection reset: 0 bytes sent to SSL, 26 bytes sent to socket 2006.06.12 10:47:50 LOG7[19699:28]: linger (remote): Invalid argument (22) 2006.06.12 10:47:50 LOG7[19699:28]: linger (local): Invalid argument (22) 2006.06.12 10:47:50 LOG7[19699:28]: rssvr finished (0 left) Thanks Sri Srilalitha Muralidhara This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. Disclaimer: *********** The contents of this E-mail (including the contents of the enclosure(s) or attachment(s) if any) are privileged and confidential material of HCL Capital Market Services and should not be disclosed to, used by or copied in any manner by anyone other than the intended addressee(s). In case you are not the desired addressee, you should delete this message and/or re-direct it to the sender. The views expressed in this E-mail message (including the enclosure(s) or attachment(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of HCL Capital Market Services. This e-mail message including attachment/(s), if any, is believed to be free of any virus. However, it is the responsibility of the recipient to ensure that it is virus free and HCL Capital Market Services is not responsible for any loss or damage arising in any way from its use.

2 1

Reposting...RE: stunnel-users Digest, Vol 23, Issue 2
by Nagasundaram, Sekhar 09 Jun '06

09 Jun '06

Any one... Is there a way to have Stunnel not stop accepting new connections after CRL expiry? See my questions below.. Any help is appreciated... Much thanks Sekhar ---------------------------------------------------------------------- Message: 1 Date: Tue, 6 Jun 2006 15:41:08 -0700 From: "Nagasundaram, Sekhar" <snagasun(a)visa.com> Subject: [stunnel-users] Processing during CRL expiry and refresh To: <stunnel-users(a)mirt.net> Message-ID: <F64762DF94A15C4EA22D250B28D98BE610093C(a)sw720ex064.visa.com> Content-Type: text/plain; charset="US-ASCII" All: I have 2 questions: 1. Is there a way to have Stunnel continue processing and accepting connections after the CRL expiry? Currently it gives a "revoking all certificates" error and stops accepting new connections. 2. Is there a configurable parameter through which we can have the CRL list refresh itself such that 1 above does not happen? Much Thanks in advance.. Sekhar ------------------------------ _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users End of stunnel-users Digest, Vol 23, Issue 2 ********************************************

1 0

syslog-ng over stunnel does not work for me
by Christoph Pleger 08 Jun '06

08 Jun '06

Hello, I set up a server and a client machine to test the combination of stunnel and syslog-ng. I followed the instructions in the example at http://www.stunnel.org/examples/syslog-ng.html, but the log messages are not sent correcly. The log on the server says: ****: syslog started ****: syslog connected from ###.###.###.###:51646 ****: SSL state (accept): before/accept initialization ****: SSL_accept: 140B544E: error: 140B544E: SSL routines:SSL_GET_NEW_SESSION:ssl session id callback failed ****: syslog finished (-1 left) The log on the client says: ****: syslog started ****: syslog connected from 127.0.0.1:3524 ****: FD 8 in non-blocking mode ****: syslog connecting ###.###.###.###:514 ****: connect_wait: waiting 10 seconds ****: connect_wait: connected ****: Remote FD=8 initialized ****: SSL state (connect): before/accept initialization ****: SSL state (connect): SSLv3 write client hello A ****: SSL_connect: Peer suddenly disconnected ****: syslog finished (0 left) Please help. Regards Christoph

1 1

Connection Reset by Peer
by Srilalitha Muralidhara(HCL Capital Market Services) 08 Jun '06

08 Jun '06

Hi, My stunnel server is unable to send data correctly to my application running the same machine. This happens when the client is run from windows platform. When client is run from UNIX everything works fine. The Stunnel Server log file says: 2006.06.05 11:54:54 LOG7[23141:8]: rssvr connecting 127.0.0.1:28091 2006.06.05 11:54:54 LOG7[23141:8]: Remote FD=1 initialized 2006.06.05 11:54:54 LOG7[23141:8]: TCP_NODELAY option set on remote socket 2006.06.05 11:54:54 LOG3[23141:8]: SSL_read: Connection reset by peer (131) 2006.06.05 11:54:54 LOG5[23141:8]: Connection reset: 0 bytes sent to SSL, 13 bytes sent to socket 2006.06.05 11:54:54 LOG5[23141:8]: linger (local): Invalid argument (22) 2006.06.05 11:54:54 LOG7[23141:8]: rssvr finished (0 left) ------------------------------------------------------------------------ -------------------------------------------------------------------- Does anybody know the cause of the problem? And hopefully the solution? Thanks Sri Disclaimer: *********** The contents of this E-mail (including the contents of the enclosure(s) or attachment(s) if any) are privileged and confidential material of HCL Capital Market Services and should not be disclosed to, used by or copied in any manner by anyone other than the intended addressee(s). In case you are not the desired addressee, you should delete this message and/or re-direct it to the sender. The views expressed in this E-mail message (including the enclosure(s) or attachment(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of HCL Capital Market Services. This e-mail message including attachment/(s), if any, is believed to be free of any virus. However, it is the responsibility of the recipient to ensure that it is virus free and HCL Capital Market Services is not responsible for any loss or damage arising in any way from its use.

1 0

decryption failed or bad record mac
by Trent Townsend 07 Jun '06

07 Jun '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've emailed about this once already, but am just giving a *little* more info. It seems similar problems with SSL proliferate the web. The problem is below (message from the client and server posted). I thought it may be a bug reported with SSL and zlib (which a fix isn't due out until the next version of OpenSSL). However, I can successfully start up a openssl s_server and talk to it with a s_client, so I think that eliminates OpenSSL. Has anyone seen this before (I'm sure this is the case) and figured it out? Client: SSL_connect: 140943FC: error:140943FC:SSL routines:SSL3_READ_BYTES:sslv3 alert bad record mac Server: SSL_accept: 1408F455: error:1408F455:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac I'm using stunnel 4.11 (tried 4.15 also) and Openssl 0.9.8a. Thanks. -----BEGIN PGP SIGNATURE----- Version: PGP Desktop 9.0.6 (Build 6060) iQA/AwUBRIcbw40HAxBKv2yIEQI5XQCg2ylvhIBlZ57euv9/wu8fM5vI40cAoKKk L2bMgFZDc23T6ED6CGJJn8oy =+PA6 -----END PGP SIGNATURE-----

1 0

RE: [stunnel-users] stunnel error
by Nadav, Erez 07 Jun '06

07 Jun '06

Hi, It seems that the problem occur when the client write large buffers (30-40Kbytes) on each write. Any idea how to solve it Thanks Erez ________________________________ From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Nadav, Erez Sent: Wednesday, June 07, 2006 6:00 PM To: stunnel-users(a)mirt.net Subject: [stunnel-users] stunnel error Hi, I use stunnel 4.14 and face this error when performing buffer writes from client to remote side SSL_write: 140D5042: error:140D5042:SSL routines:SSL3_CTRL:called a function you should not call Does anybody know how can I overcome this ??? Thanks Erez ________________________________________________________________________ __________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1). __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

stunnel error
by Nadav, Erez 07 Jun '06

07 Jun '06

Hi, I use stunnel 4.14 and face this error when performing buffer writes from client to remote side SSL_write: 140D5042: error:140D5042:SSL routines:SSL3_CTRL:called a function you should not call Does anybody know how can I overcome this ??? Thanks Erez __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

Processing during CRL expiry and refresh
by Nagasundaram, Sekhar 06 Jun '06

06 Jun '06

All: I have 2 questions: 1. Is there a way to have Stunnel continue processing and accepting connections after the CRL expiry? Currently it gives a "revoking all certificates" error and stops accepting connections. 2. Is there a configurable parameter through which we can have the CRL list refresh itself such that 1 above does not happen? Much Thanks in advance.. Sekhar

1 0

unsecure configuration
by Robert Bator 01 Jun '06

01 Jun '06

Hi , I am trying to set up stunnel to accept unsecure calls on port 1001 from inside and secure calls on port 1000 from internet. All calls are forwarded to machin B The configuration like this: secure --> 1000 machine A unsecure --> 1002 machine B unsecure --> 1001 machine A unsecure --> 1002 machine B Is this setup possible i stunnel? PS. I use "stone repeater" and this rules are easy to setup. Best Regards, Robert Bator

1 0

stunnel and bad rsa signature
by Trent Townsend 30 May '06

30 May '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On a test environment, I successfully had stunnel securing MySQL traffic between 2 systems using a verify level of 3. However, with the production system and what I would call an identical setup (albeit with new certificates), I get the following errors (see log below.) The version I'm running of stunnel is 4.11. I saw the "bad rsa signature" message in the server's output, so I regenerated the private key file to be sure I'd used the right one. Everything seems to be in order, but it will not work. Any ideas? Client: 2006.05.30 09:20:21 LOG5[21951:1]: stunnel 4.11 on i686-pc-linux-gnu UCONTEXT+POLL+IPv4+LIBWRAP with OpenSSL 0.9.7a Feb 19 2003 2006.05.30 09:20:21 LOG5[21951:1]: 499 clients allowed 2006.05.30 09:20:25 LOG5[21951:2]: stunnel_mysql connected from 127.0.0.1:32853 2006.05.30 09:20:25 LOG3[21951:2]: SSL_connect: 14094410: error: 14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure 2006.05.30 09:20:25 LOG5[21951:2]: stack_info: size=65536, current=15296 (23%), maximum=15296 (23%) Server: 2006.05.30 09:19:42 LOG7[19964:3086334176]: RAND_status claims sufficient entropy for the PRNG 2006.05.30 09:19:42 LOG6[19964:3086334176]: PRNG seeded successfully 2006.05.30 09:19:42 LOG7[19964:3086334176]: Certificate: /usr/KRB5/ openssl/ssl/private/server.key 2006.05.30 09:19:42 LOG7[19964:3086334176]: Key file: /usr/KRB5/ openssl/ssl/private/server.key 2006.05.30 09:19:42 LOG7[19964:3086334176]: Verify directory set to / usr/KRB5/openssl/ssl/certs 2006.05.30 09:19:42 LOG5[19964:3086334176]: Peer certificate location /usr/KRB5/openssl/ssl/certs 2006.05.30 09:19:42 LOG7[19964:3086334176]: SSL context initialized for service stunnel_mysqld 2006.05.30 09:19:42 LOG5[19964:3086334176]: stunnel 4.15 on i686-pc- linux-gnu with OpenSSL 0.9.7a Feb 19 2003 2006.05.30 09:19:42 LOG5[19964:3086334176]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Auth:LIBWRAP 2006.05.30 09:19:42 LOG6[19964:3086334176]: file ulimit = 1022 (can be changed with 'ulimit -n') 2006.05.30 09:19:42 LOG6[19964:3086334176]: poll() used - no FD_SETSIZE limit for file descriptors 2006.05.30 09:19:42 LOG5[19964:3086334176]: 499 clients allowed 2006.05.30 09:19:42 LOG7[19964:3086334176]: FD 4 in non-blocking mode 2006.05.30 09:19:42 LOG7[19964:3086334176]: FD 5 in non-blocking mode 2006.05.30 09:19:42 LOG7[19964:3086334176]: FD 6 in non-blocking mode 2006.05.30 09:19:42 LOG7[19964:3086334176]: SO_REUSEADDR option set on accept socket 2006.05.30 09:19:42 LOG7[19964:3086334176]: stunnel_mysqld bound to 0.0.0.0:606 2006.05.30 09:19:42 LOG7[19964:3086334176]: Created pid file /usr/ local/var/stunnel/stunnel.pid 2006.05.30 09:20:40 LOG7[19964:3086334176]: stunnel_mysqld accepted FD=7 from xxx.xxx.xxx.xxx:32854 2006.05.30 09:20:40 LOG7[19964:3086330800]: stunnel_mysqld started 2006.05.30 09:20:40 LOG7[19964:3086330800]: FD 7 in non-blocking mode 2006.05.30 09:20:40 LOG7[19964:3086330800]: FD 8 in non-blocking mode 2006.05.30 09:20:40 LOG7[19964:3086330800]: FD 9 in non-blocking mode 2006.05.30 09:20:40 LOG7[19964:3086330800]: Connection from xxx.xxx.xxx.xxx:32854 permitted by libwrap 2006.05.30 09:20:40 LOG5[19964:3086330800]: stunnel_mysqld connected from xxx.xxx.xxx.xxx:32854 2006.05.30 09:20:40 LOG7[19964:3086334176]: Cleaning up the signal pipe 2006.05.30 09:20:40 LOG6[19964:3086334176]: Child process 19967 finished with code 0 2006.05.30 09:20:40 LOG5[19964:3086330800]: VERIFY OK: depth=2, ... (Root CA) 2006.05.30 09:20:40 LOG5[19964:3086330800]: VERIFY OK: depth=1, ... (CA) 2006.05.30 09:20:40 LOG5[19964:3086330800]: VERIFY OK: depth=0, ... (client) 2006.05.30 09:20:40 LOG3[19964:3086330800]: error stack: 1408807A : error:1408807A:SSL routines:SSL3_GET_CERT_VERIFY:bad rsa signature 2006.05.30 09:20:40 LOG3[19964:3086330800]: SSL_accept: 4077068: error:04077068:rsa routines:RSA_verify:bad signature 2006.05.30 09:20:40 LOG5[19964:3086330800]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.05.30 09:20:40 LOG7[19964:3086330800]: stunnel_mysqld finished (0 left) Thanks. -----BEGIN PGP SIGNATURE----- Version: PGP Desktop 9.0.6 (Build 6060) iQA/AwUBRHx+bI0HAxBKv2yIEQIJ1wCcCVJ+9ZqXdxWGTBAS8y7ldUv+J4UAn1al ZYIA5gmw38iwsYuE7tG9esAk =ljGb -----END PGP SIGNATURE-----

1 0

Problem getting stunnel to chroot on Suse 10
by Paul Stepowski 29 May '06

29 May '06

Hi list, I'm using stunnel package that comes standard with Suse 10.0 stunnel 4.10 on i686-suse-linux-gnu UCONTEXT+POLL+IPv4+LIBWRAP with OpenSSL 0.9.7g 11 Apr 2005 I can tunnel ports over ssl using stunnel but the chroot directive doesn't seem to be working. E.g. my pid file is being created under / rather than /var/lib/stunnel-syslogng. The other paths in the config file are taken by stunnel as relative to / rather than the chroot directory. What am I missing? Here's my stunnel config. I'm not passing any other flags when running stunnel. ---snip--- client = no #debug = 7 #foreground = yes chroot = /var/lib/stunnel-syslogng setuid = stunnel setgid = nogroup pid = /stunnel.pid #output = stunnel.log socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 #compression = rle #options = DONT_INSERT_EMPTY_FRAGMENTS #verify = 2 #CApath = /certs #CAfile = /certs/stunnel.pem #CRLpath = /crls #CRLfile = /etc/stunnel/crls.pem cert = /var/lib/stunnel-syslogng/certs/stunnel.pem ---snip--- Thanks, Paul

1 0

Re: [stunnel-users] stunnel-4.15 segfaulting and looping under FreeBSD-CURRENT
by Michael Weiser 26 May '06

26 May '06

On Wed, May 17, 2006 at 06:01:37PM +0200, Michael Weiser wrote: > > I'm now retrying with a freshly compiled openssl-0.9.8b to see if that has > > anything to do with anything. > The problem persists with openssl-0.9.8b: > # gdb src/stunnel --core stunnel.core --batch -ex "thread apply all bt > full" -ex "quit" > Core was generated by `stunnel'. > Program terminated with signal 11, Segmentation fault. > #0 0x280d07b5 in SSL_get_peer_certificate () from > ../bin/openssl-0.9.8b/lib/libssl.so.0.9.8 > [New LWP 100077] The problem is triggered by a change to src/client.c in stunnel-4.15. client() now loops over calls to run_client() instead of doing it just once. The first, successful (!) call to run_client() seems to leave the ssl context in an undefined state which makes the following calls to run_client() segfault in the forked child which in turn produces the core file. My guess is, that it's not actually supposed to loop if the call to run_client() is successful. Reverting client.c to roughly 4.14 fixes the problem for me. A patch is attached. Any insights and a more permanent fix would be highly appreciated. BTW: I configured stunnel with --with-threads=pthread. By default, ucontext is detected, which is broken in stunnel-4.14 as well. After finishing, 4.14 hangs in s_poll_wait waiting for -1 seconds on 0 fds (!?). I can provide debugging log and gdb output if needed. -- bye, Michael

1 0

DNS Spoofing
by Happy Manocha 25 May '06

25 May '06

Hello All, >From Website I came to know Stunnel can help in DNS spoofing. Can someone redirect to know how this can be achieved. Stunnel can help: Protect interception of data Prevent manipulation of data And, if compiled with libwrap support: Defend against IP source routing, (one host sending packets as if they came from somewhere else) DNS spoofing (an attacker forging name server records) Regds Happy Manocha

1 0

stunnel + socks v5
by Carlos E. Mansilla G. 25 May '06

25 May '06

I need to know please, if can I accept connections from sock5 clients in stunnel4.. thnx. Carlos Mansilla

1 0

stunnel + socks v5
by Carlos E. Mansilla G. 25 May '06

25 May '06

I need to know please, if can I accept connections from sock5 clients in stunnel4.. thnx. Carlos Mansilla

1 0

libwrap support
by Happy Manocha 24 May '06

24 May '06

Hello All, Can someone throw some light on libwrap support feature of stunnel? What it is and how it can be used? Thanks in advance. Regds Happy Manocha

1 0

Using a signed *.domain.com with ssl - Getting "unable to get local issuer certificate"
by Pritesh Mehta 24 May '06

24 May '06

Hello all, I have had a good hunt around and am having trouble finding a solution. I am using stunnel to provide encrypted pop3 access to our mail server, and we have recently purchased a signed *.XXX.com certificate from godaddy. This has been great since I can use the same cert on all our servers, and this has worked cleanly with the webservices. However, I am having some issues with the stunnel and pop3 service. I am not entirely certain whether it is caused by the *.XXX.com certificate (although I think it unlikely) but was hoping someone more knowledgeable could enlighten me? I currently have stunnel configured thusly: stunnel -f \ -A /etc/stunnel/certs/sf_issuing.pem \ -p /etc/stunnel/certs/wildcard.XXX.com.stunnel.pem \ -r 127.0.0.1:110 Unfortunately my users are getting warnings, and using the openssl client I get: $ openssl s_client -connect mail.XXX.com:995 CONNECTED(00000003) depth=1 /C=US/ST=Arizona/L=Scottsdale/O=Starfield Technologies, Inc./OU=http://www.starfieldtech.com/repository/CN=Starfield Secure Certification Authority/emailAddress=practices(a)starfieldtech.com verify error:num=20:unable to get local issuer certificate verify return:0 --- Certificate chain 0 s:/O=*.XXX.com/OU=Domain Control Validated/CN=*.XXX.com i:/C=US/ST=Arizona/L=Scottsdale/O=Starfield Technologies, Inc./OU=http://www.starfieldtech.com/repository/CN=Starfield Secure Certification Authority/emailAddress=practices(a)starfieldtech.com 1 s:/C=US/ST=Arizona/L=Scottsdale/O=Starfield Technologies, Inc./OU=http://www.starfieldtech.com/repository/CN=Starfield Secure Certification Authority/emailAddress=practices(a)starfieldtech.com i:/L=ValiCert Validation Network/O=ValiCert, Inc./OU=ValiCert Class 2 Policy Validation Authority/CN=http://www.valicert.com//emailAddress=info@valicert.com --- Server certificate -----BEGIN CERTIFICATE----- [snip] -----END CERTIFICATE----- subject=/O=*.XXX.com/OU=Domain Control Validated/CN=*.XXX.com issuer=/C=US/ST=Arizona/L=Scottsdale/O=Starfield Technologies, Inc./OU=http://www.starfieldtech.com/repository/CN=Starfield Secure Certification Authority/emailAddress=practices(a)starfieldtech.com --- No client certificate CA names sent --- SSL handshake has read 2381 bytes and written 340 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 4E550C07BDA9661C4B532A28110E5616549CB9FA72D37E5C979E3C6579F8FB99 Session-ID-ctx: Master-Key: 2E588101AA098463FA40C0353009F5842FA19B1C3D48D9A0000EB2E241EFB70BB10D52FE9BC444344D49653B9FEB25F4 Key-Arg : None Start Time: 1148463445 Timeout : 300 (sec) Verify return code: 20 (unable to get local issuer certificate) --- I am positive this must have been covered before somewhere, but I haven't been able to find anything conclusive. Apologies if I'm covering well trodden ground :) TIA, -- Pritesh Mehta <pmehta(a)gnr.com> Global Name Registry _____________________________________________________ Information contained herein is Global Name Registry Proprietary Information and/or Registry Sensitive Information and is made available to you because of your interest in or affiliation with our company. This information is submitted in confidence and its disclosure to you is not intended to constitute public disclosure or authorization for disclosure to other parties. Should you have received this email and are not an intended recipient, please delete this email in its entirety. Global Name Registry is registered with the Office of the UK Information Commissioner.

1 0

<Stunnel> multiple connection
by aliquippa1 23 May '06

23 May '06

Hello I have problem with stunnel. I want to use feature which I'm not sure if is available. I want to accept connection from a host and then connect to a few hosts. I want to have something like this: accept = xxx.xxx.xxx.xxx:xxxx connect = yyy.yyy.yyy.yyy:yyyy connect = zzz.zzz.zzz.zzz:zzzz connect = vvv.vvv.vvv.vvv:vvv Now I want to get such situation: 1.accept connection from xxx. 2.try to connect to yyy. 3 if it doesn't work try to connect to zzz. 4 if it doesn't work try to connect to vvv. I wonder if it's possible, because if I use stunnel and connect from xxx it connects me only to the first host and when I connect from xxx again it connects me to the second host and after the third trial from xxx it connects me to vvv. Thanx Agnes

1 0

SSL23_GET_CLIENT_HELLO:unknown protocol
by Srilalitha Muralidhara(HCL Capital Market Services) 22 May '06

22 May '06

Hi I am getting SSL23_GET_CLIENT_HELLO:unknown protocol error stunnel. Any guesses about the cause of the problem? Here is the complete log 2006.05.22 07:01:55 LOG5[734:1]: stunnel 4.15 on sparc-sun-solaris2.6 with OpenSSL 0.9.8b 04 May 2006 2006.05.22 07:01:55 LOG5[734:1]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 Auth:LIBWRAP 2006.05.22 07:01:55 LOG6[734:1]: file ulimit = 64 (can be changed with 'ulimit -n') 2006.05.22 07:01:55 LOG6[734:1]: poll() used - no FD_SETSIZE limit for file descriptors 2006.05.22 07:01:55 LOG5[734:1]: 29 clients allowed 2006.05.22 07:01:55 LOG7[734:1]: FD 5 in non-blocking mode 2006.05.22 07:01:55 LOG7[734:1]: FD 6 in non-blocking mode 2006.05.22 07:01:55 LOG7[734:1]: FD 7 in non-blocking mode 2006.05.22 07:01:55 LOG7[734:1]: SO_REUSEADDR option set on accept socket 2006.05.22 07:01:55 LOG7[734:1]: rssvr bound to 10.140.42.11:25433 2006.05.22 07:01:55 LOG7[735:1]: Created pid file /home/sri/stunnel/var/lib/stunnel/stunnel.pid 2006.05.22 07:04:09 LOG7[735:1]: rssvr accepted FD=0 from 10.140.42.11:44360 2006.05.22 07:04:09 LOG7[735:4]: rssvr started 2006.05.22 07:04:09 LOG7[735:4]: FD 0 in non-blocking mode 2006.05.22 07:04:09 LOG7[735:4]: TCP_NODELAY option set on local socket 2006.05.22 07:04:09 LOG7[735:4]: FD 1 in non-blocking mode 2006.05.22 07:04:09 LOG7[735:4]: FD 2 in non-blocking mode 2006.05.22 07:04:09 LOG7[735:4]: Connection from 10.140.42.11:44360 permitted by libwrap 2006.05.22 07:04:09 LOG5[735:4]: rssvr connected from 10.140.42.11:44360 2006.05.22 07:04:09 LOG7[735:1]: Cleaning up the signal pipe 2006.05.22 07:04:09 LOG6[735:1]: Child process 938 finished with code 0 2006.05.22 07:04:09 LOG7[735:4]: SSL state (accept): before/accept initialization 2006.05.22 07:04:09 LOG3[735:4]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol 2006.05.22 07:04:09 LOG5[735:4]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.05.22 07:04:09 LOG7[735:4]: rssvr finished (0 left) Thanks, Sri Disclaimer: *********** The contents of this E-mail (including the contents of the enclosure(s) or attachment(s) if any) are privileged and confidential material of HCL Capital Market Services and should not be disclosed to, used by or copied in any manner by anyone other than the intended addressee(s). In case you are not the desired addressee, you should delete this message and/or re-direct it to the sender. The views expressed in this E-mail message (including the enclosure(s) or attachment(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of HCL Capital Market Services. This e-mail message including attachment/(s), if any, is believed to be free of any virus. However, it is the responsibility of the recipient to ensure that it is virus free and HCL Capital Market Services is not responsible for any loss or damage arising in any way from its use.

1 0

stunnel-4.15 segfaulting and looping under FreeBSD-CURRENT
by Michael Weiser 17 May '06

17 May '06

Hi, I've run into the problem mentioned in: > Scott Tuc Ellentuch at T-B-O-H ml at t-b-o-h.net > Fri Apr 21 23:45:11 CEST 2006 > Hi, > I just did a portupgrade in FreeBSD from 4.14 to 4.15, and now it > seems to be looping the command that I asked it, instead of just doing > it once. Has there been an option added I need to tell it to just do > once? > Thanks, Tuc I'm running stunnel in client mode. It execs uucico which receives and sends uucp jobs via stdin/stdout. The first call to uucico actually succeeds. It seems like stunnel is segfaulting and then re-exec-ing when it would normally quit. A core file is created in the current directory. But stunnel never quits and indefinitely continues to re-exec itself. Has there been any progress in solving this problem? -- Thanks, Michael

2 3

FW: [stunnel-users] Re: Re:Need a help in installation (Craig)
by Craig 17 May '06

17 May '06

Oops, mailed it directly to Peng :-0, Sorry for that ;-) Re:Need a help in installation (Craig) >Thanks a lot! Craig. I use your method: > ./configure --prefix=/stunnel2 No Problem ;-) >It seems that installation is successful. It successfully generate a >directory ./stunnel2, in which there are six subdirectories: etc lib man >sbin share var That looks right >But when I run stunnel command in the teminal window. It does not take it as >a command. Is it supposed to run stunnel command after the installation or >not? Is there anything missing in the Mac machine before it can run stunnel? If you go to the directory " /stunnel2/sbin " without quotes, do you see 2 files named stunnel and stunnel3? If you see these files, you can execute the stunnel file with something like ./stunnel --help To display the options available to you for the daemon to run. Let me know if there is something else you require ;) Regards, Craig >Thanks >Peng > From: <stunnel-users-request(a)mirt.net> > Reply-To: <stunnel-users(a)mirt.net> > Date: Mon, 15 May 2006 12:00:06 +0200 (CEST) > To: <stunnel-users(a)mirt.net> > Subject: stunnel-users Digest, Vol 22, Issue 12 > > Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > > You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. RE: Need a help in installation (Craig) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 15 May 2006 08:15:36 +0200 > From: "Craig" <stunnel(a)rsw.co.za> > Subject: RE: [stunnel-users] Need a help in installation > To: <stunnel-users(a)mirt.net> > Message-ID: > <!&!AAAAAAAAAAAYAAAAAAAAADayToAwUd9AsHeKl2eRVAnCgAAAEAAAALWLI73av7VKpv9V31ec nQ > wBAAAAAA==(a)rsw.co.za> > > Content-Type: text/plain; charset="us-ascii" > > Don't know Mac, but can't u pass a prefix like in Linux to specify another > directory, for example your home directory? > > > > ./configure --prefix=/your/destination/directory > > > > Hope this helps > > > > Craig > > > > _____ > > From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] > On Behalf Of Peng He > Sent: 12 May 2006 11:45 PM > To: stunnel-users(a)mirt.net > Subject: [stunnel-users] Need a help in installation > > > > Hi, > > I want to install Stunnel 4.15 into MAC OS X machine. Somehow I do not have > the right to make any directory in /usr so I can not install Stunnel in > /usr/local. How do I install Stunnel into different directory? > > Thanks > Peng > >

1 0

Re: Re:Need a help in installation (Craig)
by Peng He 16 May '06

16 May '06

Thanks a lot! Craig. I use your method: ./configure --prefix=/stunnel2 It seems that installation is successful. It successfully generate a directory ./stunnel2, in which there are six subdirectories: etc lib man sbin share var But when I run stunnel command in the teminal window. It does not take it as a command. Is it supposed to run stunnel command after the installation or not? Is there anything missing in the Mac machine before it can run stunnel? Thanks Peng > From: <stunnel-users-request(a)mirt.net> > Reply-To: <stunnel-users(a)mirt.net> > Date: Mon, 15 May 2006 12:00:06 +0200 (CEST) > To: <stunnel-users(a)mirt.net> > Subject: stunnel-users Digest, Vol 22, Issue 12 > > Send stunnel-users mailing list submissions to > stunnel-users(a)mirt.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > or, via email, send a message with subject or body 'help' to > stunnel-users-request(a)mirt.net > > You can reach the person managing the list at > stunnel-users-owner(a)mirt.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of stunnel-users digest..." > > > Today's Topics: > > 1. RE: Need a help in installation (Craig) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 15 May 2006 08:15:36 +0200 > From: "Craig" <stunnel(a)rsw.co.za> > Subject: RE: [stunnel-users] Need a help in installation > To: <stunnel-users(a)mirt.net> > Message-ID: > <!&!AAAAAAAAAAAYAAAAAAAAADayToAwUd9AsHeKl2eRVAnCgAAAEAAAALWLI73av7VKpv9V31ecnQ > wBAAAAAA==(a)rsw.co.za> > > Content-Type: text/plain; charset="us-ascii" > > Don't know Mac, but can't u pass a prefix like in Linux to specify another > directory, for example your home directory? > > > > ./configure --prefix=/your/destination/directory > > > > Hope this helps > > > > Craig > > > > _____ > > From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] > On Behalf Of Peng He > Sent: 12 May 2006 11:45 PM > To: stunnel-users(a)mirt.net > Subject: [stunnel-users] Need a help in installation > > > > Hi, > > I want to install Stunnel 4.15 into MAC OS X machine. Somehow I do not have > the right to make any directory in /usr so I can not install Stunnel in > /usr/local. How do I install Stunnel into different directory? > > Thanks > Peng > >

1 0

Need a help in installation
by Peng He 15 May '06

15 May '06

Hi, I want to install Stunnel 4.15 into MAC OS X machine. Somehow I do not have the right to make any directory in /usr so I can not install Stunnel in /usr/local. How do I install Stunnel into different directory? Thanks Peng

2 1

SSL2Proxy
by Steve Cohen 12 May '06

12 May '06

Hello all, I'm tyring to get around content based(notHostBased) int*rn*t cen$0ring. (don't want this page to be indexed with that keyword, so please don't wite it in your response). This is what I need to do: Set Browser on client machine to use <proxyX:port>, but I want content to be encrypted. The proxy is trusted(ownedByMe), everything else in between is not, after the proxy everything is trusted. So this would be the setup: SetupA: ClientBroswer <> STunnelOnRemoteServer <> LocalProxyServerOnSameServer(Squid) <> RestOfTheInternet And NOT this: SetupB: Browser<>LocalSTunnel<>RemoteSTunnel<>Proxy<>RestOfTheInternet Because I don't want any special kind of configuration on the client's local machine except for setting the proxy.(I am currently doing this via ssh tunneling) -I have squid running on remote server listening on 3128 and it works -I have stunnel running on remote server listening on 8686 and forwarding to localhost:3128, -I have Firefox set to use <myServer:8686> as proxy But when trying to use it, Firefox says connection reset.... Please tell me why this is happening and what I need to do. Feel free to make any suggestions you want, I won't be annoyed if you tell me something I already know. Thanks.

2 1

certificate unknown - error:14094416
by Ludovic DUFLOT 12 May '06

12 May '06

Hi, I tried to use stunnel to connect in SSL to a LDAP server. But I can't and I've got this error message: certificate unknown The certificate is self-signed. If I use stunnel for establishing connexion with IMAPS server with a self-signed certificate too, all is right but not for LDAP connexion. I searched on the list's archives and with google but I can't find any solution... Help !!! Ludo ps: these are the stunnel.conf and the log: *************************** cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [ldaps] accept = 389 connect = 10.0.0.1:636 verify = 0 [imaps] accept = 143 connect = 10.0.0.2:993 *************************** 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps connecting 10.0.0.1:636 2006.05.03 07:52:50 LOG7[4436:5780]: connect_wait: waiting 10 seconds 2006.05.03 07:52:50 LOG7[4436:5780]: connect_wait: connected 2006.05.03 07:52:50 LOG7[4436:5780]: Remote FD=244 initialized 2006.05.03 07:52:50 LOG7[4436:5780]: TCP_NODELAY option set on remote socket 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): before/connect initialization 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client hello A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server hello A 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=0, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=ldap-bourget.univ-savoie.fr 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server certificate A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server certificate request A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server done A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client certificate A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client key exchange A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write certificate verify A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write change cipher spec A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write finished A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 flush data 2006.05.03 07:52:50 LOG7[4436:5780]: SSL alert (read): fatal: certificate unknown 2006.05.03 07:52:50 LOG3[4436:5780]: SSL_connect: 14094416: error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown 2006.05.03 07:52:50 LOG5[4436:5780]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps finished (0 left)

1 0

need HELP!! HELP!! with stunnel compile
by Nadav, Erez 10 May '06

10 May '06

Hi all, Hi all stunnel users. I want to debug and fix some TLS bugs with stunnel. I loaded stunnel 4.14 sources but i failed to compile it with visual studio 6, under windows 2000 environment. 1. Does anybody has the dsp file to be used under VC6++ for proper stunnel compilation ??? 2. Do I need any other libraries beside openssl to link ? I will appreciate any help Regards Erez __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

RE: [stunnel-users] stunnel use with TLS
by Nadav, Erez 10 May '06

10 May '06

I am using simple tcp/ip connection, which fail on the first hello message -----Original Message----- From: Scott Gifford [mailto:sgifford@suspectclass.com] Sent: Wednesday, May 10, 2006 4:46 AM To: Nadav, Erez Cc: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] stunnel use with TLS "Nadav, Erez" <Erez.Nadav(a)verint.com> writes: > > > Hi all, > > > > 1. Can I use stunnel as a client which connects in TLS protocol ? Assuming you mean over a channel that starts of plaintext and is later converted to encryption, the command to start TLS is usually specific to the application protocol. What protocol are you using? For example, SMTP, IMAP, ?... ---Scott. __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

problems installing stunnel 4.15
by David Arques Perolada 10 May '06

10 May '06

I get the following message after doing "make" /usr/lib/gcc/i586-suse-linux/4.0.2/../../../../i586-suse-linux/bin/ld: cannot find -lwrap collect2: ld returned 1 exit status make[1]: *** [stunnel] Error 1 make[1]: Leaving directory `/root/Stunnel/stunnel-4.15/src' make: *** [all-recursive] Error 1 All help will be welcome Thanks in advance David Arques i Perolada E-Mail : darques(a)uoc.edu

1 0

stunnel use with TLS
by Nadav, Erez 10 May '06

10 May '06

Hi all, 1. Can I use stunnel as a client which connects in TLS protocol ? 2. I am using Stunnel 4.14 in client mode and trying to connect in TLS protocol to certain server. The connection failed with the following log file: 2006.05.03 10:42:52 LOG7[2388:1756]: connect_wait: waiting 10 seconds 2006.05.03 10:42:52 LOG7[2388:1756]: connect_wait: connected 2006.05.03 10:42:52 LOG7[2388:1756]: Remote FD=244 initialized 2006.05.03 10:42:52 LOG7[2388:1756]: TCP_NODELAY option set on remote socket 2006.05.03 10:42:52 LOG7[2388:1756]: SSL state (connect): before/connect initialization 2006.05.03 10:42:52 LOG7[2388:1756]: SSL state (connect): SSLv3 write client hello A 2006.05.03 10:42:52 LOG7[2388:1756]: SSL alert (write): fatal: handshake failure 2006.05.03 10:42:52 LOG3[2388:1756]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number I had tried to configure stunnel configuration file with options = NO_SSLv3, but nothing changed. Did I miss anything ? Can anybody help ? Thanks Nadav Erez R&D Verint Systems Ltd. Phone: +972-9-962-4753 Cell: +972-54-778-4753 Email: erez.nadav(a)verint.com <mailto:erez.nadav@erez.nadav@verint.com> Web: www.verint.com <http://www.verint.com/> __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

2 1

Installing Stunnel on AIX5.3
by Shinoy 09 May '06

09 May '06

Hi, I want to install Stunnel on AIX 5.3 and configure it. I was trying to find some documentation and also know if it will work on AIX 5.3. Any help is greatly appreciated. --------------------------------- Yahoo! India Answers: Share what you know. Learn something new. Click here Send instant messages to your online friends - NOW

2 1

RE: [stunnel-users] Stunnel configuration
by Moehrke, John (GE Healthcare) 09 May '06

09 May '06

I would further like to ask: Is it true that the proper way to get to TLSv1 is to start with SSLv3? Is there a reference that someone can point me at? John _____ From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Nadav, Erez Sent: Monday, May 08, 2006 11:55 AM To: stunnel-users(a)mirt.net Subject: [stunnel-users] Stunnel configuration Hi all, How can I configure my stunnel client application (windows) with the following parameter : TLSv1only = yes Nadav Erez R&D Verint Systems Ltd. Phone: +972-9-962-4753 Cell: +972-54-778-4753 Email: erez.nadav(a)verint.com <mailto:erez.nadav@erez.nadav@verint.com> Web: www.verint.com <http://www.verint.com/> ________________________________________________________________________ __________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

Trying to load stunnel sources
by Nadav, Erez 09 May '06

09 May '06

Hi all, I am a programmer and I want to compile the stunnel for windows application in order to try to fix some non working TLS issues. I having problem when accessing http://www.stunnel.org/download/source.html address. I have the following questions: 1. Where and How can I load all stunnel sources ? 2. How should I compile it on windows machine ? 3. How should I use the mentioned PGP key Thanks Erez __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

Stunnel configuration
by Nadav, Erez 08 May '06

08 May '06

Hi all, How can I configure my stunnel client application (windows) with the following parameter : TLSv1only = yes Nadav Erez R&D Verint Systems Ltd. Phone: +972-9-962-4753 Cell: +972-54-778-4753 Email: erez.nadav(a)verint.com <mailto:erez.nadav@erez.nadav@verint.com> Web: www.verint.com <http://www.verint.com/> __________________________________________________________________________________________ This electronic message contains information from Verint Systems, which may be privileged and confidential. The information is intended to be for the use of the individual(s)or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by replying to this email (1).

1 0

client certificate authentication
by Srilalitha Muralidhara(HCL Capital Market Services) 08 May '06

08 May '06

Hi, I am new to stunnel. My application listens on 6 socket ports. External applications either dump data on these socket ports or send requests on these socket ports to receive data. Thus, my application is a server and external applications are clients. We got to authenticate these external applications before accepting the requests/data. So I am planning to use client certificate authentication of stunnel. In this case, should the server have a certificate as well? Will the server be authenticated? Is it necessary for all the external applications to be using the same certificate? Thanks, Sri Disclaimer: *********** The contents of this E-mail (including the contents of the enclosure(s) or attachment(s) if any) are privileged and confidential material of HCL Capital Market Services and should not be disclosed to, used by or copied in any manner by anyone other than the intended addressee(s). In case you are not the desired addressee, you should delete this message and/or re-direct it to the sender. The views expressed in this E-mail message (including the enclosure(s) or attachment(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of HCL Capital Market Services. This e-mail message including attachment/(s), if any, is believed to be free of any virus. However, it is the responsibility of the recipient to ensure that it is virus free and HCL Capital Market Services is not responsible for any loss or damage arising in any way from its use.

1 0

Performance Problems.
by Don Werve 05 May '06

05 May '06

After a fair bit of poking, prodding, and googling, I have yet to find the solution to my problem. So, here goes: stunnel looks to be running slowly. Very slowly. We're starting to analyze it with gprof to see where it spends all of its time when we're trying to do content negotiation, and I've whipped up a quick-and-dirty Ruby script that grabs data from the server and then spits out the performace results; I'm sitting on my own T1, so our connectivity is pretty good. The results with this script are similar with 'delay=yes', 'session=600', and 'compression=zlib'. So, here's what happens when I nab data from our stunnel-ed server with said script (I can supply the script if anyone is interested): #File Size time thrpht time thrprt multiple ---------------------------------------------------------------------- index.html 7k http 0.1548 ( 46k/s) https 0.7449 ( 9k/s) * 4.8131 test1.jpg 1k http 0.0928 ( 12k/s) https 0.6379 ( 1k/s) * 6.8726 test2.jpg 10k http 0.1812 ( 59k/s) https 0.6743 ( 16k/s) * 3.7208 test3.jpg 19k http 0.2236 ( 85k/s) https 0.7677 ( 24k/s) * 3.4338 test4.jpg 53k http 0.5668 ( 94k/s) https 1.1543 ( 46k/s) * 2.0365 test5.jpg 97k http 0.7861 (123k/s) https 2.1974 ( 44k/s) * 2.7954 test6.jpg 214k http 1.4061 (152k/s) https 2.3735 ( 90k/s) * 1.6880 test7.jpg 140k http 0.9434 (149k/s) https 1.9331 ( 72k/s) * 2.0491 test8.jpg 470k http 2.8590 (164k/s) https 3.7696 (124k/s) * 1.3185 ('multiple' is the number of times 'slower' https is versus http). And, here's my stunnel config: *** cert = /etc/certs/combined.pem setuid = nobody setgid = nobody pid = /var/run/stunnel/stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 0 output = /var/log/stunnel [https] local = 64.40.110.16 accept = 443 connect = 64.40.110.16:80 TIMEOUTclose = 0 *** So, any ideas why stunnel is working so slowly? I mean, I know there's the overhead of the SSL negotiation, and I've heard some things about a stunnel session cache, but nothing about enabling/using it (unless 'session = something bigger than zero' does so?). Any suggestions to improve performance, especially for large batches of small transfers? Thanks-in-advance! -- Don Werve <donw(a)iradeon.net> Chief Systems Administrator / Systems Architect

1 0

Using stunnel to add https support to ONE virtual host
by Gonzalo Diethelm 05 May '06

05 May '06

Hello, I have Apache serving plain http pages for several domains running as virtual hosts on one machine (debian). I know SSL will not work with this setup, and I understand the reasons why (at least I think I do). Let's say the virtual hosts are www.server1.com www.server2.com www.server3.com I would like to use stunnel to add https capabilities to ONE of the virtual hosts (say, www.server3.com). In other words, I would like to configure stunnel in server mode with a certificate file, listening on www.server3.com:443, so that if I use a browser to visit https://www.server3.com/ then stunnel will accept the connection and forward all traffic to www.server3.com:80, letting Apache handle it; in particular, this would have to allow Apache to recognize which of the virtual hosts is being visited; I wouldn't like to have www.server1.com respond to my requests instead of www.server3.com. Is this possible? Any caveats, hints, recommendations? Thanks in advance, and best regards, -- Gonzalo Diethelm gonzalo.diethelm(a)aditiva.com

2 1

Using stunnel to add https support to ONE virtual host
by Gonzalo Diethelm 04 May '06

04 May '06

Hello, I have Apache serving plain http pages for several domains running as virtual hosts on one machine (debian). I know SSL will not work with this setup, and I understand the reasons why (at least I think I do). Let's say the virtual hosts are www.server1.com www.server2.com www.server3.com I would like to use stunnel to add https capabilities to ONE of the virtual hosts (say, www.server3.com). In other words, I would like to configure stunnel in server mode with a certificate file, listening on www.server3.com:443, so that if I use a browser to visit https://www.server3.com/ then stunnel will accept the connection and forward all traffic to www.server3.com:80, letting Apache handle it; in particular, this would have to allow Apache to recognize which of the virtual hosts is being visited; I wouldn't like to have www.server1.com respond to my requests instead of www.server3.com. Is this possible? Any caveats, hints, recommendations? Thanks in advance, and best regards, -- Gonzalo Diethelm gonzalo.diethelm(a)aditiva.com

1 0

Re: stunnel 4.15 crashes with vnc server 4.1.1
by Harry Boeck 04 May '06

04 May '06

Hallo stunnel-users, @Michal Trojnara: Thanks for your help, Mike! The solution came overnight when i remembered my own message: > and the screen on the server side should remove the background image > and visual effects). Well: I disabled the desktop modifications in vnc and it runs. Something is incompatible in the stunnel GUI with the removal of global windows GUI behaviour (despite the fact, that i have not a single one of them in use - to the best of my knowledge), what has nothing to do with the dedication of stunnel. Maybe there's a simple GUI message not handled correctly? As this seems to be something common to all windows versions, could this possibly happen in windows xp, too? (I don't use one, so somone would have to investigate this.) It's another motivation to start compiling in cygnus. But unfortunally at this very moment i'm occupied with other tasks. May be some other guy has the fancy to look at this matter... Mit freundlichem Gruß Harry Boeck

1 0

stunnel install issues with mknod command
by Trishul Shah 04 May '06

04 May '06

Hi, I was wondering if you could help me, I am trying to install stunnel on a machine running solaris 10, but the catch is that I am trying to install it within a zone in solaris 10, unfortunately during the installation process after the source is compiled I see the following error: Making install in src test -z "/usr/local/lib" || /bin/bash ../auto/mkinstalldirs "/usr/local/lib" /bin/bash ../libtool --mode=install ../auto/install-sh -c 'libstunnel.la' '/usr/local/lib/libstunnel.la' ../auto/install-sh -c .libs/libstunnel.so /usr/local/lib/libstunnel.so chmod +x /usr/local/lib/libstunnel.so ../auto/install-sh -c .libs/libstunnel.lai /usr/local/lib/libstunnel.la ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - use the `-RLIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- test -z "/usr/local/sbin" || /bin/bash ../auto/mkinstalldirs "/usr/local/sbin" /bin/bash ../libtool --mode=install ../auto/install-sh -c 'stunnel' '/usr/local/sbin/stunnel' ../auto/install-sh -c stunnel /usr/local/sbin/stunnel test -z "/usr/local/sbin" || /bin/bash ../auto/mkinstalldirs "/usr/local/sbin" ../auto/install-sh -c 'stunnel3' '/usr/local/sbin/stunnel3' Making install in doc test -z "/usr/local/share/doc/stunnel" || /bin/bash ../auto/mkinstalldirs "/usr/local/share/doc/stunnel" ../auto/install-sh -c -m 644 'stunnel.html' '/usr/local/share/doc/stunnel/stunnel.html' ../auto/install-sh -c -m 644 'stunnel.pl.html' '/usr/local/share/doc/stunnel/stunnel.pl.html' ../auto/install-sh -c -m 644 'stunnel.fr.html' '/usr/local/share/doc/stunnel/stunnel.fr.html' test -z "/usr/local/man/man8" || /bin/bash ../auto/mkinstalldirs "/usr/local/man/man8" ../auto/install-sh -c -m 644 './stunnel.8' '/usr/local/man/man8/stunnel.8' ../auto/install-sh -c -m 644 './stunnel.pl.8' '/usr/local/man/man8/stunnel.pl.8' ../auto/install-sh -c -m 644 './stunnel.fr.8' '/usr/local/man/man8/stunnel.fr.8' Making install in tools test -z "/usr/local/etc/stunnel" || /bin/bash ../auto/mkinstalldirs "/usr/local/etc/stunnel" ../auto/install-sh -c -m 644 'stunnel.conf-sample' '/usr/local/etc/stunnel/stunnel.conf-sample' if test ! -r /usr/local/etc/stunnel/stunnel.pem; then \ if test -r "/dev/urandom"; then \ dd if="/dev/urandom" of=stunnel.rnd bs=256 count=1; \ RND="-rand stunnel.rnd"; \ else \ RND=""; \ fi; \ /usr/local/bin/openssl req -new -x509 -days 365 -nodes $RND \ -config ./stunnel.cnf \ -out stunnel.pem -keyout stunnel.pem; \ test -eq 0 || /usr/local/bin/openssl gendh $RND 512 >> stunnel.pem; \ /usr/local/bin/openssl x509 -subject -dates -fingerprint -noout -in stunnel.pem; \ ../auto/install-sh -c -m 600 stunnel.pem /usr/local/etc/stunnel/stunnel.pem; \ rm stunnel.pem; \ fi mkdir -p /usr/local/var/stunnel chmod a=rwx,+t /usr/local/var/stunnel if uname | grep SunOS; then \ mkdir -p /usr/local/var/stunnel/dev; \ chmod u=rwx,go=rx /usr/local/var/stunnel/dev; \ mknod /usr/local/var/stunnel/dev/zero c 13 12; \ chmod a=rw /usr/local/var/stunnel/dev/zero; \ fi SunOS mknod: Not owner *** Error code 2 make: Fatal error: Command failed for target `install-data-local' Current working directory /export/home/playtech/stunnel-4.14/tools *** Error code 1 The following command caused the error: make install-exec-am install-data-am make: Fatal error: Command failed for target `install-am' Current working directory /export/home/playtech/stunnel-4.14/tools *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo install-recursive | sed s/-recursive//`; \ list='src doc tools'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `install-recursive' After much digging around I have discovered that the mknod command cannot be used within a solaris 10 zone, I have gotten round this previously by installing stunnel from the global zone but that intertwines the parent zone with the child zone and ideally we would like to keep these as independent of each other as possible as we use these zones for 3rs party applications and hence we have a lot of other user traffic on these zones. Thanks in advance for your help. Kind Regards, Trishul Shah Blue Square Tel: 020 7288 7920 Mob: 07789 982 688 Fax: 020 7288 7955

1 0

stunnel 4.15 crashes with vnc server 4.1.1
by Harry Boeck 04 May '06

04 May '06

Hallo stunnel users, i'm learning to use ssl and ssh tools to get secured access to my home server from work and other places. I already have a working ssh installation but stumbled over stunnel ba accident. I would like to use it, because i still have computers in use with win98 (both for myself and among my clients) and this little program is exactly all what i would need to use vnc over a secured connection. SSH to the contrary needs a little bit more setup (over a cygwin that serves the only purpose of aquiring such tools like SSH), needs its own crypto library compilation and so on. Now, there is the problem that stunnel 4.15 crashes at the moment, when the vnc server 4.1.1 tries to deliver its first screen to the client. Stunnel was downloaded from http://www.stunnel.org/download/binaries.html, vnc was downloaded from http://www.realvnc.com (already some times ago). Both where downloaded as binaries, for the typical help hints on forums for the question "i have a compile problem on windows" being "how dare you"... Both machines i'm using for testing use win98 as operating system. The crash happens both when testing a configuration on one machine with stunnel running both as server and as client, as well as when using it to connect two machines with stunnel running as server on the machine with vnc server and as client on the machine with vnc client. VNC runs correct for itself as well as via an ssh secured connection. Stunnel is startet with only the server versus the client configuration file as command line parameter. The configuration files are: http://harryboeck.dyndns.org/Sicherheit/stunnel-server.ini http://harryboeck.dyndns.org/Sicherheit/stunnel-client.ini Stunnel delivers correctly the data between vnc server and client (including connection establishment and authentication) until the point of first screen transfer (when the screen on the client side turns black and the screen on the server side should remove the background image and visual effects). The output of stunnel server and client is: http://harryboeck.dyndns.org/Sicherheit/stunnel-server.log http://harryboeck.dyndns.org/Sicherheit/stunnel-client.log The output of "stunnel -version" is: http://harryboeck.dyndns.org/Sicherheit/stunnel-version.txt I have no clue what '6. Output of "uname -a"' should mean, if that is somehow important for hints, please let me know. openssl version is: OpenSSL 0.9.8a 11 Oct 2005 I would appreciate any suggestions or hints on the interaction of vnc and stunnel. with best regards Harry Boeck

2 1

certificate unknown
by Ludovic DUFLOT 03 May '06

03 May '06

Hi, I tried to use stunnel to connect in SSL to a LDAP server. But I can't and I've got this error message: certificate unknown I use stunnel for establishing connexion with IMAPS server and all is right but not for LDAP connexion. The certificate is self-signate. I searched on the list's archives and with google but I can't find any solution... Help !!! Ludo ps: these are the stunnel.conf and the log: *************************** cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [ldaps] accept = 389 connect = 10.0.0.1:636 verify = 0 [imaps] accept = 143 connect = 10.0.0.2:993 *************************** 2006.05.03 07:52:40 LOG7[4436:2436]: RAND_status claims sufficient entropy for the PRNG 2006.05.03 07:52:40 LOG6[4436:2436]: PRNG seeded successfully 2006.05.03 07:52:40 LOG7[4436:2436]: Certificate: stunnel.pem 2006.05.03 07:52:40 LOG7[4436:2436]: Key file: stunnel.pem 2006.05.03 07:52:40 LOG7[4436:2436]: SSL context initialized for service ldaps 2006.05.03 07:52:40 LOG7[4436:2436]: Certificate: stunnel.pem 2006.05.03 07:52:40 LOG7[4436:2436]: Key file: stunnel.pem 2006.05.03 07:52:40 LOG7[4436:2436]: SSL context initialized for service imaps 2006.05.03 07:52:40 LOG7[4436:2436]: Certificate: stunnel.pem 2006.05.03 07:52:40 LOG7[4436:2436]: Key file: stunnel.pem 2006.05.03 07:52:40 LOG7[4436:2436]: SSL context initialized for service https 2006.05.03 07:52:40 LOG5[4436:2436]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7f 22 Mar 2005 2006.05.03 07:52:40 LOG5[4436:2436]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.05.03 07:52:40 LOG5[4436:4612]: No limit detected for the number of clients 2006.05.03 07:52:40 LOG7[4436:4612]: FD 192 in non-blocking mode 2006.05.03 07:52:40 LOG7[4436:4612]: SO_REUSEADDR option set on accept socket 2006.05.03 07:52:40 LOG7[4436:4612]: ldaps bound to 0.0.0.0:389 2006.05.03 07:52:40 LOG7[4436:4612]: FD 196 in non-blocking mode 2006.05.03 07:52:40 LOG7[4436:4612]: SO_REUSEADDR option set on accept socket 2006.05.03 07:52:40 LOG7[4436:4612]: imaps bound to 0.0.0.0:143 2006.05.03 07:52:40 LOG7[4436:4612]: FD 212 in non-blocking mode 2006.05.03 07:52:40 LOG7[4436:4612]: SO_REUSEADDR option set on accept socket 2006.05.03 07:52:40 LOG7[4436:4612]: https bound to 0.0.0.0:443 2006.05.03 07:52:50 LOG7[4436:4612]: ldaps accepted FD=220 from 127.0.0.1:2893 2006.05.03 07:52:50 LOG7[4436:4612]: Creating a new thread 2006.05.03 07:52:50 LOG7[4436:4612]: New thread created 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps started 2006.05.03 07:52:50 LOG7[4436:5780]: FD 220 in non-blocking mode 2006.05.03 07:52:50 LOG7[4436:5780]: TCP_NODELAY option set on local socket 2006.05.03 07:52:50 LOG5[4436:5780]: ldaps connected from 127.0.0.1:2893 2006.05.03 07:52:50 LOG7[4436:5780]: FD 244 in non-blocking mode 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps connecting 10.0.0.1:636 2006.05.03 07:52:50 LOG7[4436:5780]: connect_wait: waiting 10 seconds 2006.05.03 07:52:50 LOG7[4436:5780]: connect_wait: connected 2006.05.03 07:52:50 LOG7[4436:5780]: Remote FD=244 initialized 2006.05.03 07:52:50 LOG7[4436:5780]: TCP_NODELAY option set on remote socket 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): before/connect initialization 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client hello A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server hello A 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=1, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=DSI CA/emailAddress=admin(a)univ-savoie.fr 2006.05.03 07:52:50 LOG5[4436:5780]: VERIFY IGNORE: depth=0, /C=FR/ST=Savoie/L=Chambery/O=Universite de Savoie/OU=DSI/CN=ldap-bourget.univ-savoie.fr 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server certificate A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server certificate request A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 read server done A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client certificate A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write client key exchange A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write certificate verify A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write change cipher spec A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 write finished A 2006.05.03 07:52:50 LOG7[4436:5780]: SSL state (connect): SSLv3 flush data 2006.05.03 07:52:50 LOG7[4436:5780]: SSL alert (read): fatal: certificate unknown 2006.05.03 07:52:50 LOG3[4436:5780]: SSL_connect: 14094416: error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown 2006.05.03 07:52:50 LOG5[4436:5780]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2006.05.03 07:52:50 LOG7[4436:5780]: ldaps finished (0 left)

1 0

Wrapping interclient connections outbound to many servers
by Matthew Case 02 May '06

02 May '06

Hello all, I have searched high and low for a solution to this problem, but I haven't found anything so I am coming here in hopes someone will be able to help me. I have to wrap the interclient protocol (>1024 to 3060) in some manner of encryption to appease one of my clients. I have already wrapped the ajp13 protocol between the apache server and the tomcat server, but now the tomcat server (which acts as an stunnel server in the ajp13 setup) must also act as a client and wrap all outbound and return traffic to 10 servers to and from port 3060. Making large modifications to the source code is not going to be feasible given my current time crunch (it must be implemented in two weeks). Has anyone run into anything like this and does anyone have any tips? Thanks in advance! - Matt

1 0

Stunnel + Snort + MySQL
by Steven 02 May '06

02 May '06

I have a problem that I have been unsuccessful in solve thus far with Stunnel, Snort, and MySQL. Stunnel (client & server): 4.04 Snort: 2.4.4 on the client MySQL Ver 11.18 Distrib 3.23.58, for redhat-linux-gnu (i386) [not the latest and greatest by any means] I setup stunnel so that traffic destined for localhost 3306 (mysql) on the client goes to port 3307 on the server. Stunnel on the server is setup to take traffic from 3307 and send it to 3306 locally. This connection works fine. I can fire up Snort and have events properly log to my snort database on the server from the client. However, if stunnel is stopped/restarted on either the client or the server Snort is not able to keep writing to the database unless it is restarted. I just get this error: May 2 12:44:03 box snort[44126]: database: Problem inserting a new signature 'Test Snort Signature' May 2 12:44:03 box1 snort[44126]: database: mysql_error: MySQL server has gone away SQL=INSERT INTO event (sid,cid,signature,timestamp) VALUES ('4', '22', '0', '2006-05-02 16:44:03.322') May 2 12:44:03 box snort[44126]: database: mysql_error: MySQL server has gone away SQL=ROLLBACK Whenever I close stunnel it sends traffic to the other end. I can restart it and open up new connections just fine. However, Snort will not even try and connect to port 3306. Once stunnel has been stopped (or even restarted) it just immediately fails to even try and connect to the port. It seems there's some kind of signal sent that kills the connection (and all future connections?). I cannot figure oout why this happens. Any ideas? Thanks Steven

1 0

stunnel broken?
by Smith, Brian C1 (N-ASGARD AVIONICS) 28 Apr '06

28 Apr '06

does anyone know what this error message means and how to fix it? SSL_read (SSL_ERROR_SYSCALL): Operation would block (246) Brian Smith brian.c1.smith(a)lmco.com

1 0

SSL_read (SSL_ERROR_SYSCALL): Operation would block (246)
by Smith, Brian C1 (N-ASGARD AVIONICS) 26 Apr '06

26 Apr '06

Hello all, I am having a problem using stunnel to connect web application in java to a UniData Database server. The setup is working fine, traffic passes over the tunnel from webserver to database without a problem except when a large query is sent over the tunnel. Normal queries get responses no problem. I am running HP-UX 11.00. Stunnel is running in daemon mode on both servers. Any ideas why this might happen? Is there a buffer limit or something for stunnel? Thanks in advance! Here's the stunnel.conf files for them: database side: ------------------------------------------------------ RNDfile=/opt/hpws/apache/stunnel/.stunnel.rnd pid = /opt/hpws/apache/logs/stunnel.pid debug = 7 output = /opt/hpws/apache/logs/stunnel.log client = no foreground = no [unidata] accept = 5555 connect = 127.0.0.1:31438 ------------------------------------------------------ webserver side: ------------------------------------------------------ RNDfile=/opt/hpws/apache/stunnel/.stunnel.rnd pid = /opt/hpws/apache/logs/stunnel.pid debug = 7 output = /opt/hpws/apache/logs/stunnel.log client = yes foreground = no [unidata] accept = 127.0.0.1:5555 connect = dbserver:5555 ------------------------------------------------------ Here is my stunnel -version output: ------------------------------------------------------ stunnel 4.04 on hppa2.0w-hp-hpux11.00 PTHREAD with OpenSSL 0.9.7g 11 Apr 2005 Global options cert = /opt/hpws/apache/stunnel/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 key = /opt/hpws/apache/stunnel/etc/stunnel/stunnel.pem pid = /opt/hpws/apache/stunnel/var/run/stunnel.pid RNDbytes = 64 RNDoverwrite = yes session = 300 seconds verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTidle = 43200 seconds ------------------------------------------------------ Here is the error from the client: ------------------------------------------------------ 2006.04.26 10:47:11 LOG7[1862:1]: unidata accepted FD=0 from 127.0.0.1:49644 2006.04.26 10:47:11 LOG7[1862:1]: FD 0 in non-blocking mode 2006.04.26 10:47:11 LOG7[1862:8]: unidata started 2006.04.26 10:47:11 LOG5[1862:8]: unidata connected from 127.0.0.1:49644 2006.04.26 10:47:11 LOG7[1862:8]: FD 1 in non-blocking mode 2006.04.26 10:47:11 LOG7[1862:8]: unidata connecting 141.240.76.34:5555 2006.04.26 10:47:11 LOG7[1862:8]: remote connect #1: EINPROGRESS: retrying 2006.04.26 10:47:11 LOG7[1862:8]: waitforsocket: FD=1, DIR=write 2006.04.26 10:47:11 LOG7[1862:8]: waitforsocket: ok 2006.04.26 10:47:11 LOG7[1862:8]: Remote FD=1 initialized 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): before/connect initialization 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 write client hello A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 read server hello A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 read server certificate A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 read server done A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 write client key exchange A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 write change cipher spec A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 write finished A 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 flush data 2006.04.26 10:47:11 LOG7[1862:8]: SSL state (connect): SSLv3 read finished A 2006.04.26 10:47:11 LOG7[1862:8]: 3 items in the session cache 2006.04.26 10:47:11 LOG7[1862:8]: 7 client connects (SSL_connect()) 2006.04.26 10:47:11 LOG7[1862:8]: 7 client connects that finished 2006.04.26 10:47:11 LOG7[1862:8]: 0 client renegotiatations requested 2006.04.26 10:47:11 LOG7[1862:8]: 0 server connects (SSL_accept()) 2006.04.26 10:47:11 LOG7[1862:8]: 0 server connects that finished 2006.04.26 10:47:11 LOG7[1862:8]: 0 server renegotiatiations requested 2006.04.26 10:47:11 LOG7[1862:8]: 4 session cache hits 2006.04.26 10:47:11 LOG7[1862:8]: 0 session cache misses 2006.04.26 10:47:11 LOG7[1862:8]: 0 session cache timeouts 2006.04.26 10:47:11 LOG6[1862:8]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2006.04.26 10:47:12 LOG3[1862:8]: SSL_read (SSL_ERROR_SYSCALL): Operation would block (246) 2006.04.26 10:47:12 LOG5[1862:8]: Connection reset: 744 bytes sent to SSL, 539 bytes sent to socket 2006.04.26 10:47:12 LOG7[1862:8]: unidata finished (0 left) --------------------------------------------------------- Here is the error from the server: --------------------------------------------------------- 2006.04.26 10:48:24 LOG7[18850:1]: unidata accepted FD=0 from 141.240.76.29:49645 2006.04.26 10:48:24 LOG7[18850:1]: FD 0 in non-blocking mode 2006.04.26 10:48:24 LOG7[18850:6]: unidata started 2006.04.26 10:48:24 LOG5[18850:6]: unidata connected from 141.240.76.29:49645 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): before/accept initialization 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 read client hello A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 write server hello A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 write certificate A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 write server done A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 flush data 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 read client key exchange A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 read finished A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 write change cipher spec A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 write finished A 2006.04.26 10:48:24 LOG7[18850:6]: SSL state (accept): SSLv3 flush data 2006.04.26 10:48:24 LOG7[18850:6]: 1 items in the session cache 2006.04.26 10:48:24 LOG7[18850:6]: 0 client connects (SSL_connect()) 2006.04.26 10:48:24 LOG7[18850:6]: 0 client connects that finished 2006.04.26 10:48:24 LOG7[18850:6]: 0 client renegotiatations requested 2006.04.26 10:48:24 LOG7[18850:6]: 5 server connects (SSL_accept()) 2006.04.26 10:48:24 LOG7[18850:6]: 5 server connects that finished 2006.04.26 10:48:24 LOG7[18850:6]: 0 server renegotiatiations requested 2006.04.26 10:48:24 LOG7[18850:6]: 3 session cache hits 2006.04.26 10:48:24 LOG7[18850:6]: 1 session cache misses 2006.04.26 10:48:24 LOG7[18850:6]: 1 session cache timeouts 2006.04.26 10:48:24 LOG6[18850:6]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2006.04.26 10:48:24 LOG7[18850:6]: FD 1 in non-blocking mode 2006.04.26 10:48:24 LOG7[18850:6]: unidata connecting 127.0.0.1:31438 2006.04.26 10:48:24 LOG7[18850:6]: Remote FD=1 initialized 2006.04.26 10:48:25 LOG3[18850:6]: SSL_read (SSL_ERROR_SYSCALL): Connection reset by peer (232) 2006.04.26 10:48:25 LOG5[18850:6]: Connection reset: 9477 bytes sent to SSL, 744 bytes sent to socket 2006.04.26 10:48:25 LOG7[18850:6]: unidata finished (0 left) ---------------------------------------------------------- Brian Smith brian.c1.smith(a)lmco.com

1 0

NSIS Installer Script
by Ryan O'Horo 25 Apr '06

25 Apr '06

I'm looking to distribute stunnel for Windows in such a manner that stunnel installs with a client certificate already configured. Is the original NSIS installer script available for use? Ryan O'Horo

2 1

New behaviour under 4.15?
by Scott Tuc Ellentuch＠T-B-O-H 24 Apr '06

24 Apr '06

Hi, I just did a portupgrade in FreeBSD from 4.14 to 4.15, and now it seems to be looping the command that I asked it, instead of just doing it once. Has there been an option added I need to tell it to just do once? Thanks, Tuc

3 2

too many file descriptors
by Sligar, Benjamin 22 Apr '06

22 Apr '06

I'm working on upgrading from stunnel 4.04 to the 4.15 to utilize the per port specification of a certificate. On my initial testing, I ran with only a few ports, specified the different certs, and, everything seems to work fine. I'm ran into a problem, though, when trying to use the same config file in regards to the number of configured ports. I have 104 inbound ports setup, and, when it hits the 69th configured port, I get the following message for this, and every port that follows: s_poll_add failed for FD=69: too many file descriptors I checked the code, and, this is what I found: #define MAX_FD 64 I didn't find a relation to any configurable options, so I made a change to this parameter in the code, recompiled, and, I was able to start up all of my listens without error. I just wanted to pass this along, and, if it does tie into a configurable parameter, my apologies for not finding it....if someone knows it, please pass that on. Thanks! **************************************** Benjamin Sligar Senior Development Support Specialist Transaction Network Services, Inc P: 703.453.8324 F: 703.453.8391 AIM: dagdromer88 **************************************** This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information of Transaction Network Services. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

2 1

Stunnel with TPM engine !!!
by dinesh.kallath＠bt.com 19 Apr '06

19 Apr '06

Hello I am new to Stunnel and would like to know how to integrate the engine with Stunnel 4.15. I am trying to integrate a Trusted Platform Module (TPM) engine which is compatible with OpenSSL to use with Stunnel so that the private key for SSL connection can be retrieved and stored in the hardware. I was able to configure the Stunnel config file to use the engine and it is loading the engine fine. The problem I am facing now is the key which stunnel tries to load can be loaded only by the engine, I mean it has to be loaded into the TPM to use it and stunnel tried to load it in the normal way. Please find the debug output bellow, # ./stunnel stunnel-engine.conf 2006.04.19 13:39:22 LOG7[1261:3086812864]: Enabling support for engine 'tpm' DEBUG e_tpm_err.c:295 ERR_load_TPM_strings DEBUG e_tpm_err.c:298 TPM_lib_error_code is 136 2006.04.19 13:39:22 LOG7[1261:3086812864]: Initializing engine DEBUG e_tpm.c:336 tpm_engine_init LOG_DEBUG TSPI ../tcsd_api/clntside.c:58 Sending TSP packet to host localhost. LOG_DEBUG TSPI ../tcsd_api/clntside.c:74 Connecting to 127.0.0.1 LOG_DEBUG TSPI ../tcsd_api/tcstp.c:390 TCS_OpenContext_RPC_TP: Received TCS Context: 0xa0ef791d 2006.04.19 13:39:22 LOG7[1261:3086812864]: Engine initialized 2006.04.19 13:39:22 LOG7[1261:3086812864]: Engine closed 2006.04.19 13:39:22 LOG7[1261:3086812864]: Snagged 64 random bytes from /root/.rnd DEBUG e_tpm.c:1151 tpm_rand_bytes getting 1024 bytes LOG_DEBUG TSPI ../tcsd_api/tcstp.c:2488 TCSP_GetRandom_TP: TCS Context: 0xa0ef791d 2006.04.19 13:39:23 LOG7[1261:3086812864]: Wrote 1024 new random bytes to /root/.rnd DEBUG e_tpm.c:1171 tpm_rand_status 2006.04.19 13:39:23 LOG7[1261:3086812864]: RAND_status claims sufficient entropy for the PRNG 2006.04.19 13:39:23 LOG6[1261:3086812864]: PRNG seeded successfully DEBUG e_tpm.c:736 tpm_rsa_init 2006.04.19 13:39:23 LOG7[1261:3086812864]: Certificate: /root/dk/CVS/070406/applications/openssl_tpm_engine/TpmKey.crt 2006.04.19 13:39:23 LOG7[1261:3086812864]: Key file: /root/dk/CVS/070406/applications/openssl_tpm_engine/TpmKey.key 2006.04.19 13:39:23 LOG3[1261:3086812864]: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib 2006.04.19 13:39:23 LOG3[1261:3086812864]: SSL_CTX_use_RSAPrivateKey_file: 906D06C: error:0906D06C:PEM routines:PEM_read_bio:no start line It is obvious from the debug that the Stunnel expect a private key file in PEM format but the whole issue is that the private key I have (created using TPM) is not in a PEM format, it is an encrypted file with root key used to encrypt stays inside the TPM hardware. I suppose we need to provide a key load function which loads the key into the TPM rather than using Stunnel. It will be a great help if someone could provide me with some pointers on how to solve this, or please let me know if I am missing out something. Also do ask me if you need any further clarifications. Many thanks, Dinesh Kallath, CISSP Research Professional, Security Research Centre BT Group Chief Technology Office ___________________________ Tel : +44 (0) 1473 643476 Fax : +44 (0) 1473 646886 Mob: +44 (0) 7952144553 Email: dinesh.kallath(a)bt.com Post : PP:2A, B28, Adastral Park, Ipswich IP5 3RE. British Telecommunications plc Registered office: 81 Newgate Street London EC1A 7AJ Registered in England no. 1800000 This electronic message contains information from British Telecommunications plc which may be privileged or confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by telephone or email (to the numbers or address above) immediately. Activity and use of the British Telecommunications plc email system is monitored to secure its effective operation and for other lawful business purposes. Communications using this system will also be monitored and may be recorded to secure effective operation and for other lawful business purposes.

1 0

stunnel-4.15 doesn't work on Mac OS X 10.4.6
by SUENAGA Hiroki 18 Apr '06

18 Apr '06

Dear all, I found a problem that the stunnel-4.15 doesn't work on the Mac OS X 10.4.6. I think this is a BUG. My environment is: - OS: Mac OS X 10.4.6/Intel - Compiler: gcc 4.0.1 (from XCode 2.2) - OpenSSL: 0.9.7i (Mac OS X original version) - Usage: connect to the submission port. The detail of BUG is the following: In protocol.c::smtp_client() line 138, fdputline() called with argument line = "EHLO localhost." This is a string literal. 130 static void smtp_client(CLI *c) { ... 138 fdputline(c, c->remote_fd.fd, "EHLO localhost"); ... In network.c::fdputline() line 565, the literal is passed to 1st argument of safeconcat(). 556 void fdputline(CLI *c, int fd, char *line) { .... 565 safeconcat(line, crlf); ... In common.h line 311, safeconcat() is #define'ed as: 311 #define safeconcat(dst, src) \ 312 (dst[STRLEN-1]='\0', strncat((dst), (src), \ STRLEN-strlen(dst)-1)) This means the macro safeconcat() write to string literal. This is the BUG. In Mac OS X envoronment, string literal is NOT writable. So protection fault occurs at this code. On the other environment, this breaks somewhere in the heap or in the stack. This may also cause a crash. In stunnel-4.14, fdprintf() is used instead of fdputline(). fdprint() have own writable buffers on stack, and the string literal is copied to the stack. This works fine. The work around is using own writable buffers in fdputline() like fdprint() in stunnel-4.14. But it seems to be a performance tuning why fdputline() is used. So I don't know what is the correct way to fix this BUG.... I hope this BUG is fixed in the future release. If this was already reported, please ignore this mail. Thank you. Rgards, ---------- Internet Initiative Japan Inc. Research & Development Section, Product Development Division, SEIL Business Unit SUENAGA Hiroki <hsuenaga(a)iij.ad.jp>

2 2

STunnel and the MAC
by Bryan Bearden 15 Apr '06

15 Apr '06

I am working on setting up a mac server and having trouble getting the stunnel to work on the mac. I installed Darwin Ports and am running it under there. It appears to be running and my stunnel.conf file appears to be correct, but I cannot get it to use stunnel. Any ideas? I'm trying to connect to MySQL 4. thanks... Bryan

1 0

Choosing local 'source' IP? (again)
by Don Werve 14 Apr '06

14 Apr '06

This is a repost, but the response I got last time said, 'use the "local" option'...which does not appear to work. Ok, so here's the problem: I've got stunnel handling SSL for a web-based service that is otherwise too stupid to be able to talk https. On the same piece of hardware that runs this service (Virtuozzo if you must know), I've set up stunnel to listen to ETH0_IP:443 and wrapper them to ETH0_IP:80, which is where VZ listens. This works wonderfully. Unfortunately, I need to set up a redirection rule inside this service that bounces people back to the https:// page if they try to come in over http. Since said service isn't managing its own SSL, I have no solid way of determining which connections are wrappered by stunnel and which connections come in over the wire, save for by the IP address of the connection. Now, each piece of iron has two ethernet adapters, so I got the bright idea to try and get stunnel to 'appear' to be connecting from the IP address of the second adapter. So, I set 'local = ETH1_IP' in stunnel.conf, and...nada. Still shows as connecting from ETH0_IP. I've screwed with socket options, read the source code for Stunnel, and so on. Having read the source code and refreshed my knowledge of socket() and connect(), is it really even possible to do what I want if stunnel is running on the same system? Oh, a ptrace of stunnel also yields the following: socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 8 fcntl64(8, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(8, F_SETFL, O_RDWR|O_NONBLOCK) = 0 bind(8, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("[ETH1_IP]")}, 16) = 0 connect(8, {sa_family=AF_INET, sin_port=htons(80), sin_addr=inet_addr("[ETH0_IP]")}, 16) = -1 EINPROGRESS (Operation now in progress) ...and the connection inside of $CRAP_SYSTEM shows the connection as coming from ETH0_IP. So, I'm kind of at my wits' end here. Any possible way to make this work? Thanks-in-advance! -- Don Werve <donw(a)iradeon.net> Chief Systems Administrator / Systems Architect

1 0

stunnel4 stealing my ports (listening on ports it shouldn't be)
by Eric Brown 12 Apr '06

12 Apr '06

I have two stunnel processes. One listing on 443 -> localhost:80. The other listening on 8000 -> localhost:7001. (See configs below.) However, when I stop the process listening on port 7001, both stunnel processes start listening on 7001 (and a few other ports). I'm completely confused as to why this would happen. This is what I see normally: mta4-tiny-support (epgate)[6]$ sudo lsof -p 25253 -p 25255 -a -i4 Password: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME stunnel4 25253 root 6u IPv4 3439450 TCP *:8000 (LISTEN) stunnel4 25255 root 6u IPv4 3439456 TCP *:https (LISTEN) This is what I see when stunnel appears to go bizerk: (after stopping the process that was listening on ports *:7000, localhost:7001 & localhost:7005) COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME stunnel4 22788 root 5u IPv4 1269640 TCP 127.0.0.1:4341- >127.0.0.1:19996 (CLOSE_WAIT) stunnel4 22788 root 6u IPv4 1273504 TCP 127.0.0.1:7001 (LISTEN) stunnel4 22788 root 7u IPv4 1273476 TCP 127.0.0.1:4606- >127.0.0.1:19995 (ESTABLISHED) stunnel4 22788 root 9u IPv4 1273477 TCP 127.0.0.1:19995- >127.0.0.1:4606 (ESTABLISHED) stunnel4 22788 root 11u IPv4 1273507 TCP *:7000 (LISTEN) stunnel4 22788 root 17u IPv4 1273515 TCP 127.0.0.1:7005 (LISTEN) stunnel4 22788 root 19u IPv4 1274895 TCP 127.0.0.1:7001- >127.0.0.1:1793 (CLOSE_WAIT) stunnel4 22788 root 24u IPv4 1275089 TCP *:8000 (LISTEN) stunnel4 22790 root 5u IPv4 1269640 TCP 127.0.0.1:4341- >127.0.0.1:19996 (CLOSE_WAIT) stunnel4 22790 root 6u IPv4 1273504 TCP 127.0.0.1:7001 (LISTEN) stunnel4 22790 root 7u IPv4 1273476 TCP 127.0.0.1:4606- >127.0.0.1:19995 (ESTABLISHED) stunnel4 22790 root 9u IPv4 1273477 TCP 127.0.0.1:19995- >127.0.0.1:4606 (ESTABLISHED) stunnel4 22790 root 11u IPv4 1273507 TCP *:7000 (LISTEN) stunnel4 22790 root 17u IPv4 1273515 TCP 127.0.0.1:7005 (LISTEN) stunnel4 22790 root 19u IPv4 1274895 TCP 127.0.0.1:7001- >127.0.0.1:1793 (CLOSE_WAIT) stunnel4 22790 root 24u IPv4 1275094 TCP *:443 (LISTEN) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:7008 0.0.0.0:* LISTEN 0 1281907 24848/python tcp 0 0 0.0.0.0:8000 0.0.0.0:* LISTEN 0 1275089 22788/stunnel4 tcp 0 0 0.0.0.0:1025 0.0.0.0:* LISTEN 0 1681 - tcp 0 0 0.0.0.0:963 0.0.0.0:* LISTEN 0 1556 1205/rpc.statd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 1238 986/portmap tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 1281911 24848/python tcp 0 0 127.0.0.1:7025 0.0.0.0:* LISTEN 0 1281130 24605/master tcp 0 0 127.0.0.1:7026 0.0.0.0:* LISTEN 0 1281542 24677/python tcp 0 0 0.0.0.0:818 0.0.0.0:* LISTEN 0 1356 1061/ypbind tcp 0 0 127.0.0.1:7027 0.0.0.0:* LISTEN 0 1281731 24777/python tcp 0 0 127.0.0.1:7028 0.0.0.0:* LISTEN 0 1281910 24848/python tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1486 1195/sshd tcp 0 0 0.0.0.0:7000 0.0.0.0:* LISTEN 0 1273507 22788/stunnel4 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 400 1269115 20559/postmaster tcp 0 0 172.16.80.213:25 0.0.0.0:* LISTEN 0 1281126 24605/master tcp 0 0 172.16.80.212:25 0.0.0.0:* LISTEN 0 1280994 24584/master tcp 0 0 127.0.0.1:7001 0.0.0.0:* LISTEN 0 1273504 22788/stunnel4 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 0 1275094 22790/stunnel4 tcp 0 0 127.0.0.1:955 0.0.0.0:* LISTEN 0 1518 1201/famd tcp 0 0 127.0.0.1:7005 0.0.0.0:* LISTEN 0 1273515 22788/stunnel4 tcp 0 0 127.0.0.1:7006 0.0.0.0:* LISTEN 0 1281540 24677/python tcp 0 0 127.0.0.1:7007 0.0.0.0:* LISTEN 0 1281724 24777/python I'm running stunnel 4.09 on Debian 3.1/Linux 2.6 Kernel. My configurations are: pid=/var/run/epgate_admin_stunnel4.pid cert=/epgate/etc/ssl/admin.stunnel [Admin] accept=8000 connect=7001 and: pid=/var/run/epgate_quarantine_stunnel4.pid cert=/epgate/etc/ssl/quar.stunnel [Quarantine] accept=443 connect=80

1 0

Deamon signal on close connection
by Ondra Medek 05 Apr '06

05 Apr '06

Hi, I'm using stunnel4 in daemon mode. It runs a bash script "service" for each connection. I want to stop the script, when the client closes the connection. Does the stunnel4 send any signal to child process when the connection is closed? My script receives no signal. Or is it a problem of bash? The only way how can the script find, that connection is broken is by reading the standart input, but I don't want to read any standart input. Thanks P.S. a snip of stunnel4 config: [aswconsole] accept = 1002 exec = /home/ondrejm/SeptimOS/ServerConsole/aswc-new/opt/asw/console/service

1 0

Having problems with an special configuration
by Michael Spiegle 04 Apr '06

04 Apr '06

Hi all, I've got a strange thing (at least I think so) that i'm trying to do with stunnel and it doesn't work. Here's the layout... Feel free to skip the next 3 paragraphs to get to the root of the problem: I'm using stunnel to provide SSL for a set of webservers behind a pair of LVS loadbalancers using keepalived. lets say I have a public IP of 10.0.0.1. I have an iptables rule which marks all 443 traffic to this IP with a fwmark, then keepalived dumps the traffic to the stunnel after seeing this fwmark. I have configured LVS to use direct-routing so that the stunnel server can see the original public IP which was requested (so it can serve up the right cert). Now, here is where things break. Internally, lets say stun is setup with an IP 192.168.0.10, and the LVS server has an interface on this VLAN with the IP 192.168.0.5. In my keepalived configuration for the correct fwmark, I dump the traffic to stun on 192.168.0.10. When I test this by creating a connection to the public IP address (10.0.0.1), LVS dumps the traffic to stunnel as planned and stunnel sees something like the following in TCPDUMP: Websurfer's_IP:123131 ----> 10.0.0.1:443 Stunnel refuses to do anything with the traffic. I assumed this was becuase the IP 10.0.0.1 wasn't configured anywhere on the stunnel box itself. I assigned this IP to the loopback interface as an alias, and it still doesn't work. I've straced/debug-logged stunnel and it doesn't do anything - almost like it doesn't think it should service the traffic. If I run netstat - plan, stunnel is listening to 0.0.0.0:443. So, why doesn't stunnel want to do anything with this traffic? uname -a: Linux ssl-server.domain.com 2.4.29-1.2smp #1 SMP Fri Mar 18 15:45:07 EST 2005 i686 unknown Running redhat 7.3. Glibc: glibc-2.2.5-44 glibc-common-2.2.5-44 openssl version: 0.9.6b configuration: cert = /nfs/ssl/pem/default chroot = /nfs certdir = /ssl/pem hashdir = yes pid = /run/stunnel.pid setuid = nobody setgid = nogroup output = /var/log/stunnel.log [https] accept = 443 connect = *:80 httpprotocol = yes TIMEOUTclose = 1 IP on loopback: bash-2.05a# ip addr list 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo inet 10.0.0.1/32 brd 10.0.0.255 scope global lo:0 ... ... ... Michael Spiegle mike(a)nauticaltech.com 310.686.4570

1 0

(stunnel-4.14) poor performance with openssl engine
by Zhuang Yuyao 03 Apr '06

03 Apr '06

Hi, I've just added openssl engine support for Cavium Nitrox lite PCI card. Here are the speed test output: [engine] stands for speed test output with engine [soft] stands for speed test output without engine (openssl internal software implementation used) ~ # openssl speed -evp [rc4|aes256|sha1] [-engine /root/libcavium.so] ...... The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes rc4[engine] 6339.20k 25376.00k 100966.40k 3757056.00k 919961.60k rc4[soft] 6056.66k 7017.34k 7228.37k 7339.13k 7356.14k aes-256-cbc[engine] 3178.40k 25465.60k 50636.80k 194201.60k 2088140.80k aes-256-cbc[soft] 2430.36k 2572.93k 2597.45k 2617.27k 2609.82k sha1[engine] 774.20k 3115.20k 16486.40k 27033.60k 285593.60k sha1[soft] 915.74k 2622.71k 5678.93k 7942.23k 9041.75k ~ # openssl speed rsa [-engine /root/libcavium.so] sign verify sign/s verify/s rsa[soft] 512 bits 0.013810s 0.001349s 72.4 741.2 rsa[soft] 1024 bits 0.079200s 0.004342s 12.6 230.3 sign verify sign/s verify/s rsa[engine] 512 bits 0.000037s 0.000022s 26725.8 45181.5 rsa[engine] 1024 bits 0.000046s 0.000043s 21866.7 23489.1 The speed test shows than using engine is much much faster than software implementations. but while testing with stunnel, the result is really poor. I am still using apache benchmark 2 as the test tool. #ab2 -c 50 -n 100 https://192.168.10.5/test_1k.html (a html file whose size is 1Kbytes) #ab2 -c 50 -n 100 https://192.168.10.5/test_4k.html (a html file whose size is 4Kbytes) #ab2 -c 50 -n 100 https://192.168.10.5/test_50k.html (a html file whose size is 50Kbytes) #ab2 -c 50 -n 100 https://192.168.10.5/test_100k.html (a html file whose size is 100Kbytes) #ab2 -c 50 -n 100 https://192.168.10.5/test_200k.html (a html file whose size is 200Kbytes) Here is the result: Algorithm engine 1K 4K 50K 100K 200K AES-256-CBC+SHA1 no 14.12 13.21 7.92 4.48 2.17 (Requests per second) AES-256-CBC+SHA1 yes 51.10 23.34 7.30 3.12 1.91 (Requests per second) the data says everything. while using engine with stunnel, we got some performance increasement for processing small files, but processing bigger files is even slower than software implementation (it's quite strange, because proccessing large data blocks with hardware engine is assumed to be much faster than proccessing small data blocks). I did the same test for several times, but the result is the same. something I can be sure: 1) while doing stunnel engine test, all of the algorithms are processed by the engine. I can see it by debugging information printed on console screen. 2) the client running ab2 is a AMD64 with 1G RAM, and the web server (apache) used in the test above is an XEON with 2G RAM. so the bottleneck should be neither ab2 nor apache. So here are my questions: Has anyone tried stunnel with a hardware acceleartor? How about the performance? BTW, attached to this mail is a little patch for stunnel-4.14 which allows the engine directive in stunnel.conf to be set to either a engine id or a shared object path refer to the engine (ie. engine = /root/libcavium.so) Best regards, Zhuang Yuyao --- stunnel-4.14/src/ssl.c Thu Oct 27 09:42:54 2005 UTC +++ stunnel/src/ssl.c Tue Mar 28 08:48:03 2006 UTC @@ -122,6 +143,21 @@ } #if (SSLEAY_VERSION_NUMBER >= 0x00907000L) && defined(HAVE_OSSL_ENGINE_H) +static ENGINE *load_dynamic_engine(const char *engine) +{ + ENGINE *e = ENGINE_by_id("dynamic"); + if (e) + { + if (!ENGINE_ctrl_cmd_string(e, "SO_PATH", engine, 0) + || !ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0)) + { + ENGINE_free(e); + e = NULL; + } + } + return e; +} + static void init_engine(void) { ENGINE *e; @@ -133,9 +169,12 @@ } e=ENGINE_by_id(options.engine); if(!e) { + e = load_dynamic_engine(options.engine); + if (!e) { s_log(LOG_ERR, "Engine not found"); exit(1); } + } if(!ENGINE_init(e)) { s_log(LOG_ERR, "Engine can't be initialized"); ENGINE_free(e);

2 1

autostart stunnel at boot
by christof mestdag 03 Apr '06

03 Apr '06

hi is there another solution for booting stunnel without writting a custom rc5 script ? DO i have to make changes to make it works as a daemon? -> stunnel.conf client=yes output=/var/log/stunnel.log [ldaps] accept=localhost:389 connect=192.168.1.101:636

1 0

Re: [stunnel-users] Config for client proxy https (privoxy + stunnel)
by Xavier Cheney 02 Apr '06

02 Apr '06

Hi everybody, I found my mistake !! The process is not good. This is the correct process : browser (localhost:8118) <-> (localhost:8118) privoxy <-web-> server [and] (localhost:8888) stunnel (server:443) So with only privoxy like proxy in my Firefox config - when I ask http://server/page.html , data is modified by privoxy - when I ask https://server/page.html, data is transmitted by privoxy - when I ask http://localhost:888/page.html data is modified by privoxy and the real data transmitted is https://server/page.html , stunnel managing SSL between localhost and server. My new config : [https] accept = 8888 connect = server:443 In fact, it was the stunnel main function that I didn't understand. Sorry :) Thanks to exos, and hope it will help someone, Xavier Xavier Cheney <xav26000(a)yahoo.fr> a écrit : Hi, I wan to customize web page before viewing by my browser Firefox. With "privoxy" (www.privoxy.org) I can modify (proxy filter) HTTP web page, but not HTTPS pages. So, I want to use stunnel, to transfer HTTPS in HTTP between my proxy and server, like this : browser (8118) <-> (8118) privoxy (8888) <-> (8888) stunnel (server:443) <-web-> server This is my stunnel.conf : ---------------------------------------------------- ciphers = RC4-MD5:DES-CBC3-SHA verify = 0 debug = 7 client = yes [https] accept = 8888 connect = server.server.com:443 TIMEOUTclose = 0 ---------------------------------------------------- And my log : ---------------------------------------------------- 2006.03.31 11:40:02 LOG7[3396:2944]: RAND_status claims sufficient entropy for the PRNG 2006.03.31 11:40:02 LOG6[3396:2944]: PRNG seeded successfully 2006.03.31 11:40:02 LOG7[3396:2944]: SSL context initialized for service https 2006.03.31 11:40:02 LOG5[3396:2944]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.03.31 11:40:02 LOG5[3396:2944]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.03.31 11:40:02 LOG5[3396:2952]: No limit detected for the number of clients 2006.03.31 11:40:02 LOG7[3396:2952]: FD 192 in non-blocking mode 2006.03.31 11:40:02 LOG7[3396:2952]: SO_REUSEADDR option set on accept socket 2006.03.31 11:40:02 LOG7[3396:2952]: https bound to 0.0.0.0:8888 2006.03.31 11:40:07 LOG7[3396:2952]: https accepted FD=200 from 127.0.0.1:2414 2006.03.31 11:40:07 LOG7[3396:2952]: Creating a new thread 2006.03.31 11:40:07 LOG7[3396:2952]: New thread created 2006.03.31 11:40:07 LOG7[3396:3320]: https started 2006.03.31 11:40:07 LOG7[3396:3320]: FD 200 in non-blocking mode 2006.03.31 11:40:07 LOG5[3396:3320]: https connected from 127.0.0.1:2414 2006.03.31 11:40:07 LOG7[3396:3320]: FD 232 in non-blocking mode 2006.03.31 11:40:07 LOG7[3396:3320]: https connecting 195.101.206.82:443 2006.03.31 11:40:07 LOG7[3396:3320]: connect_wait: waiting 10 seconds 2006.03.31 11:40:07 LOG7[3396:3320]: connect_wait: connected 2006.03.31 11:40:07 LOG7[3396:3320]: Remote FD=232 initialized 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): before/connect initialization 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write client hello A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read server hello A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read server certificate A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read server done A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write client key exchange A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write change cipher spec A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write finished A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 flush data 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read finished A 2006.03.31 11:40:07 LOG7[3396:3320]: 1 items in the session cache 2006.03.31 11:40:07 LOG7[3396:3320]: 1 client connects (SSL_connect()) 2006.03.31 11:40:07 LOG7[3396:3320]: 1 client connects that finished 2006.03.31 11:40:07 LOG7[3396:3320]: 0 client renegotiations requested 2006.03.31 11:40:07 LOG7[3396:3320]: 0 server connects (SSL_accept()) 2006.03.31 11:40:07 LOG7[3396:3320]: 0 server connects that finished 2006.03.31 11:40:07 LOG7[3396:3320]: 0 server renegotiations requested 2006.03.31 11:40:07 LOG7[3396:3320]: 0 session cache hits 2006.03.31 11:40:07 LOG7[3396:3320]: 0 session cache misses 2006.03.31 11:40:07 LOG7[3396:3320]: 0 session cache timeouts 2006.03.31 11:40:07 LOG6[3396:3320]: SSL connected: new session negotiated 2006.03.31 11:40:07 LOG6[3396:3320]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2006.03.31 11:40:07 LOG7[3396:3320]: Socket closed on read 2006.03.31 11:40:07 LOG7[3396:3320]: SSL write shutdown 2006.03.31 11:40:07 LOG7[3396:3320]: SSL alert (write): warning: close notify 2006.03.31 11:40:07 LOG7[3396:3320]: SSL_shutdown retrying 2006.03.31 11:40:07 LOG7[3396:3320]: SSL doesn't need to read or write 2006.03.31 11:40:07 LOG6[3396:3320]: s_poll_wait timeout: connection close 2006.03.31 11:40:07 LOG5[3396:3320]: Connection closed: 211 bytes sent to SSL, 163 bytes sent to socket 2006.03.31 11:40:07 LOG7[3396:3320]: https finished (0 left) 2006.03.31 11:40:07 LOG7[3396:2952]: https accepted FD=220 from 127.0.0.1:2417 2006.03.31 11:40:07 LOG7[3396:2952]: Creating a new thread 2006.03.31 11:40:07 LOG7[3396:2952]: New thread created 2006.03.31 11:40:07 LOG7[3396:3944]: https started 2006.03.31 11:40:07 LOG7[3396:3944]: FD 220 in non-blocking mode 2006.03.31 11:40:07 LOG5[3396:3944]: https connected from 127.0.0.1:2417 2006.03.31 11:40:07 LOG7[3396:3944]: FD 232 in non-blocking mode 2006.03.31 11:40:07 LOG7[3396:3944]: https connecting 195.101.206.82:443 2006.03.31 11:40:07 LOG7[3396:3944]: connect_wait: waiting 10 seconds 2006.03.31 11:40:08 LOG7[3396:3944]: connect_wait: connected 2006.03.31 11:40:08 LOG7[3396:3944]: Remote FD=232 initialized 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): before/connect initialization 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 write client hello A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 read server hello A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 read finished A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 write change cipher spec A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 write finished A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 flush data 2006.03.31 11:40:08 LOG7[3396:3944]: 1 items in the session cache 2006.03.31 11:40:08 LOG7[3396:3944]: 2 client connects (SSL_connect()) 2006.03.31 11:40:08 LOG7[3396:3944]: 2 client connects that finished 2006.03.31 11:40:08 LOG7[3396:3944]: 0 client renegotiations requested 2006.03.31 11:40:08 LOG7[3396:3944]: 0 server connects (SSL_accept()) 2006.03.31 11:40:08 LOG7[3396:3944]: 0 server connects that finished 2006.03.31 11:40:08 LOG7[3396:3944]: 0 server renegotiations requested 2006.03.31 11:40:08 LOG7[3396:3944]: 1 session cache hits 2006.03.31 11:40:08 LOG7[3396:3944]: 0 session cache misses 2006.03.31 11:40:08 LOG7[3396:3944]: 0 session cache timeouts 2006.03.31 11:40:08 LOG6[3396:3944]: SSL connected: previous session reused 2006.03.31 11:40:08 LOG7[3396:3944]: Socket closed on read 2006.03.31 11:40:08 LOG7[3396:3944]: SSL write shutdown 2006.03.31 11:40:08 LOG7[3396:3944]: SSL alert (write): warning: close notify 2006.03.31 11:40:08 LOG7[3396:3944]: SSL_shutdown retrying 2006.03.31 11:40:08 LOG7[3396:3944]: SSL doesn't need to read or write 2006.03.31 11:40:08 LOG6[3396:3944]: s_poll_wait timeout: connection close 2006.03.31 11:40:08 LOG5[3396:3944]: Connection closed: 211 bytes sent to SSL, 163 bytes sent to socket 2006.03.31 11:40:08 LOG7[3396:3944]: https finished (0 left) ---------------------------------------------------- Note the first "Socket closed on read". I think the problem is there. The web reply is "Bad Request (Invalid URL)" Where did I do a mistake ? Thanks for answer, Xavier

1 0

Config for client proxy https (privoxy + stunnel)
by Xavier Cheney 31 Mar '06

31 Mar '06

Hi, I wan to customize web page before viewing by my browser Firefox. With "privoxy" (www.privoxy.org) I can modify (proxy filter) HTTP web page, but not HTTPS pages. So, I want to use stunnel, to transfer HTTPS in HTTP between my proxy and server, like this : browser (8118) <-> (8118) privoxy (8888) <-> (8888) stunnel (server:443) <-web-> server This is my stunnel.conf : ---------------------------------------------------- ciphers = RC4-MD5:DES-CBC3-SHA verify = 0 debug = 7 client = yes [https] accept = 8888 connect = server.server.com:443 TIMEOUTclose = 0 ---------------------------------------------------- And my log : ---------------------------------------------------- 2006.03.31 11:40:02 LOG7[3396:2944]: RAND_status claims sufficient entropy for the PRNG 2006.03.31 11:40:02 LOG6[3396:2944]: PRNG seeded successfully 2006.03.31 11:40:02 LOG7[3396:2944]: SSL context initialized for service https 2006.03.31 11:40:02 LOG5[3396:2944]: stunnel 4.15 on x86-pc-mingw32-gnu with OpenSSL 0.9.7i 14 Oct 2005 2006.03.31 11:40:02 LOG5[3396:2944]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2006.03.31 11:40:02 LOG5[3396:2952]: No limit detected for the number of clients 2006.03.31 11:40:02 LOG7[3396:2952]: FD 192 in non-blocking mode 2006.03.31 11:40:02 LOG7[3396:2952]: SO_REUSEADDR option set on accept socket 2006.03.31 11:40:02 LOG7[3396:2952]: https bound to 0.0.0.0:8888 2006.03.31 11:40:07 LOG7[3396:2952]: https accepted FD=200 from 127.0.0.1:2414 2006.03.31 11:40:07 LOG7[3396:2952]: Creating a new thread 2006.03.31 11:40:07 LOG7[3396:2952]: New thread created 2006.03.31 11:40:07 LOG7[3396:3320]: https started 2006.03.31 11:40:07 LOG7[3396:3320]: FD 200 in non-blocking mode 2006.03.31 11:40:07 LOG5[3396:3320]: https connected from 127.0.0.1:2414 2006.03.31 11:40:07 LOG7[3396:3320]: FD 232 in non-blocking mode 2006.03.31 11:40:07 LOG7[3396:3320]: https connecting 195.101.206.82:443 2006.03.31 11:40:07 LOG7[3396:3320]: connect_wait: waiting 10 seconds 2006.03.31 11:40:07 LOG7[3396:3320]: connect_wait: connected 2006.03.31 11:40:07 LOG7[3396:3320]: Remote FD=232 initialized 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): before/connect initialization 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write client hello A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read server hello A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read server certificate A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read server done A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write client key exchange A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write change cipher spec A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 write finished A 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 flush data 2006.03.31 11:40:07 LOG7[3396:3320]: SSL state (connect): SSLv3 read finished A 2006.03.31 11:40:07 LOG7[3396:3320]: 1 items in the session cache 2006.03.31 11:40:07 LOG7[3396:3320]: 1 client connects (SSL_connect()) 2006.03.31 11:40:07 LOG7[3396:3320]: 1 client connects that finished 2006.03.31 11:40:07 LOG7[3396:3320]: 0 client renegotiations requested 2006.03.31 11:40:07 LOG7[3396:3320]: 0 server connects (SSL_accept()) 2006.03.31 11:40:07 LOG7[3396:3320]: 0 server connects that finished 2006.03.31 11:40:07 LOG7[3396:3320]: 0 server renegotiations requested 2006.03.31 11:40:07 LOG7[3396:3320]: 0 session cache hits 2006.03.31 11:40:07 LOG7[3396:3320]: 0 session cache misses 2006.03.31 11:40:07 LOG7[3396:3320]: 0 session cache timeouts 2006.03.31 11:40:07 LOG6[3396:3320]: SSL connected: new session negotiated 2006.03.31 11:40:07 LOG6[3396:3320]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2006.03.31 11:40:07 LOG7[3396:3320]: Socket closed on read 2006.03.31 11:40:07 LOG7[3396:3320]: SSL write shutdown 2006.03.31 11:40:07 LOG7[3396:3320]: SSL alert (write): warning: close notify 2006.03.31 11:40:07 LOG7[3396:3320]: SSL_shutdown retrying 2006.03.31 11:40:07 LOG7[3396:3320]: SSL doesn't need to read or write 2006.03.31 11:40:07 LOG6[3396:3320]: s_poll_wait timeout: connection close 2006.03.31 11:40:07 LOG5[3396:3320]: Connection closed: 211 bytes sent to SSL, 163 bytes sent to socket 2006.03.31 11:40:07 LOG7[3396:3320]: https finished (0 left) 2006.03.31 11:40:07 LOG7[3396:2952]: https accepted FD=220 from 127.0.0.1:2417 2006.03.31 11:40:07 LOG7[3396:2952]: Creating a new thread 2006.03.31 11:40:07 LOG7[3396:2952]: New thread created 2006.03.31 11:40:07 LOG7[3396:3944]: https started 2006.03.31 11:40:07 LOG7[3396:3944]: FD 220 in non-blocking mode 2006.03.31 11:40:07 LOG5[3396:3944]: https connected from 127.0.0.1:2417 2006.03.31 11:40:07 LOG7[3396:3944]: FD 232 in non-blocking mode 2006.03.31 11:40:07 LOG7[3396:3944]: https connecting 195.101.206.82:443 2006.03.31 11:40:07 LOG7[3396:3944]: connect_wait: waiting 10 seconds 2006.03.31 11:40:08 LOG7[3396:3944]: connect_wait: connected 2006.03.31 11:40:08 LOG7[3396:3944]: Remote FD=232 initialized 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): before/connect initialization 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 write client hello A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 read server hello A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 read finished A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 write change cipher spec A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 write finished A 2006.03.31 11:40:08 LOG7[3396:3944]: SSL state (connect): SSLv3 flush data 2006.03.31 11:40:08 LOG7[3396:3944]: 1 items in the session cache 2006.03.31 11:40:08 LOG7[3396:3944]: 2 client connects (SSL_connect()) 2006.03.31 11:40:08 LOG7[3396:3944]: 2 client connects that finished 2006.03.31 11:40:08 LOG7[3396:3944]: 0 client renegotiations requested 2006.03.31 11:40:08 LOG7[3396:3944]: 0 server connects (SSL_accept()) 2006.03.31 11:40:08 LOG7[3396:3944]: 0 server connects that finished 2006.03.31 11:40:08 LOG7[3396:3944]: 0 server renegotiations requested 2006.03.31 11:40:08 LOG7[3396:3944]: 1 session cache hits 2006.03.31 11:40:08 LOG7[3396:3944]: 0 session cache misses 2006.03.31 11:40:08 LOG7[3396:3944]: 0 session cache timeouts 2006.03.31 11:40:08 LOG6[3396:3944]: SSL connected: previous session reused 2006.03.31 11:40:08 LOG7[3396:3944]: Socket closed on read 2006.03.31 11:40:08 LOG7[3396:3944]: SSL write shutdown 2006.03.31 11:40:08 LOG7[3396:3944]: SSL alert (write): warning: close notify 2006.03.31 11:40:08 LOG7[3396:3944]: SSL_shutdown retrying 2006.03.31 11:40:08 LOG7[3396:3944]: SSL doesn't need to read or write 2006.03.31 11:40:08 LOG6[3396:3944]: s_poll_wait timeout: connection close 2006.03.31 11:40:08 LOG5[3396:3944]: Connection closed: 211 bytes sent to SSL, 163 bytes sent to socket 2006.03.31 11:40:08 LOG7[3396:3944]: https finished (0 left) ---------------------------------------------------- Note the first "Socket closed on read". I think the problem is there. The web reply is "Bad Request (Invalid URL)" Where did I do a mistake ? Thanks for answer, Xavier --------------------------------- Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international.Téléchargez la version beta. --------------------------------- Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international.Téléchargez la version beta.

1 0

Stunnel client failed to connect to a server?
by Xia David You -X (xiyou - Varite Inc.＠Cisco) 31 Mar '06

31 Mar '06

Hi, I have a client which is build on stunnel which is failed to talk to a secured server while we can connect to the server with IE as client. We have both Server certificate and Client Certificate. From looking the log, it appears that the IE also got the same failure in the first step, but it did not give up and tried again with "2 1 0.0470 (0.0470) C>S SSLv2 compatible client hello" and successed. so what did we do wrong here? some extra openssl library need to be built in? thanks David Both Sever side SSL dump attached (IE client and Stunnel client).

1 0

unpublished Ceritificate
by Happy Manocha 28 Mar '06

28 Mar '06

Hi all, I am a newbie with Stunnel. Can anyone let me know how can I configure my client for a server , which does not have published certificate. Though I am able to connect but it gives a warning message "The server you are connected to is using a security certificate that could not be verifed...etc". Is there any way to avoid it? An early response will be appreciated. Regds Happy Manocha

2 1

stunnel runs in background but fails to do his job
by christof mestdag 19 Mar '06

19 Mar '06

hi, i'm having difficulties using the stunnel program. I've got some help to change the syntax from 3.X to 4.X but it doesn't work. I've got this config file -> client=yes output=/var/log/stunnel.log [ldaps] accept=localhost:389 connect=192.168.1.101:636 I run it with /usr/sbin/stunnel ./stunnel.conf -> check background: ps -ef | grep stunnel root 3270 ..... /usr/sbin/stunnel ./stunnel.conf Problem is when i close on server gate 389 i can't get any input. I expect the traffic going towards port 636 on server but it doenst. I can close port 636 and open just 389. He keeps sending everyting towards 389. I also tried to create a stunnel.conf by using make stunnel.conf in the tools directory ( in you tar.gz ) but nothing changes. /var/log/stunnel.log says -> date : stunnel 4.05 on i386-red hat .... with openssl 0.9.7a ->date : FD_SETSIZE=1024 file ulimt=1024 -> 500 clients allowed any input for my problem. It's kinda important. I'm really fed up with the tutorials which shows it works and everything always fails at my place :( greetz christof

1 0

converting old syntax to 4.x syntax
by christof mestdag 17 Mar '06

17 Mar '06

Hi, i've got a old syntax and i don't find what the new syntax might be. stunnel -c -d localhost:389 -r win2003server:636 ( I want to make a tunnel to the ssl port of the active directory server to allow password changes ) i've read a possibility which allows no use of certificates but it was in old syntax. any input to change that syntax? i thought it might be something like this. -> client=yes foreground=no accept = 389 connect = win2003server.FME.local what do i do with this. an upgrade manual speaks of an stunnel.conf file. But this one doesn't excists on my Red Hat Desktop computer. It says also that we have an /usr/local/etc/stunnel dir but i don't have that also. I only have an /etc/stunnel dir (which is totally empty ) and the /usr/sbin/stunnel tool ( version 4.05 ) thx in advance

2 2

Multiple Host Certificates
by Sligar, Benjamin 17 Mar '06

17 Mar '06

Is it possible to run one instance of stunnel and have it verify certain ports against different certificates? For instance: [listen1 5003] accept = 5003 connect = 10.61.0.132:7300 [listen2 5008] accept = 5008 connect = 10.61.0.132:7300 Would it be possible to have listen2 validate on a seperate certificate, or, will I need to run a second instance of stunnel on my box and have it point to the different certificate? Basically, I want to know if I can setup a different certificate on a per-port basis. I don't see any options in the definition of the listen port that I can specify a different CERT, only the default CERT option at the top of the config file. Version: stunnel-4.04 Options cert = /usr/local/conf/ssl.pem chroot = /usr/local/stunnel-4.04/var/run/stunnel/ pid = /stunnel.pid setuid = www setgid = webgroup options = NO_SSLv2 ciphers = DES-CBC3-SHA:IDEA-CBC-SHA:RC4-SHA:RC4-MD5:AES256-SHA:AES128-SHA uname -a Linux ssl 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown gcc -v Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98) openssl version OpenSSL 0.9.6b [engine] 9 Jul 2001 This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information of Transaction Network Services. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

2 1

Help with config of stunnel.
by mike smith 16 Mar '06

16 Mar '06

I am trying to set up a tunnel for telnet. I am doing this just to learn how to get stunnel to work. I thought this would be easy way to learn how to use stunnel for other uses we have. My problem is I don't understand how to start it on the client side. I can telnet to the server without stunnel but I don't know how to start stunnel on the client side. The log file shows ssltelnet bound to 0.0.0.0:23 for the client and ssltelnet bound to 0.0.0.0:992 for the server If you have any ideas what I may need to do I would be greatfull. I'm sure that I'm missing a step configuring it. This is what my stunnel.conf files look like for the server cert = /usr/local/etc/stunnel/stunnel.pem chroot = /usr/local/var/run/stunnel/ pid = /stunnel.pid setuid = nobody setgid = nobody client = no debug = 7 output = /stunnel.log [ssltelnet] accept = 992 connect = 23 For the Client cert = /usr/local/etc/stunnel/stunnel.pem chroot = /usr/local/var/run/stunnel/ pid = /stunnel.pid setuid = nobody setgid = nobody client = yes debug = 7 output = /stunnel.log [ssltelnet] accept = 23 connect = 192.168.1.102:992 --------------------------------- Yahoo! Travel Find great deals to the top 10 hottest destinations! --------------------------------- Yahoo! Travel Find great deals to the top 10 hottest destinations!

1 0

IE tries to verify client certificate?
by Don Werve 15 Mar '06

15 Mar '06

I've got stunnel providing SSL wrapper services for an otherwise SSL-stupid vendor-webserver-thingy that listens on port 80. I'm using a wildcard certificate purchased from $VENDOR, and it seems to work fine in Safari, Firefox, w3m, and basically everything SSL aware known to Man. Except, that is, Internet Explorer, where the user gets a popup window asking them to choose a certificate to verify their connection. This is really throwing me for a loop; I've tried setting 'verify = 0' and 'options = ALL' in the service definition under stunnel, no dice. Any ideas why IE thinks it needs to verify, but nothing else does? -- Don Werve <donw(a)iradeon.net> Chief Systems Administrator / Systems Architect

1 0

GeoTrust QuickSSL cert and stunnel
by Steve Shepherd 15 Mar '06

15 Mar '06

I've got a client that has a GeoTrust "QuickSSL" certificate (we normally deal with Thawte). I installed the cert/key, but it is not functioning (pulling up default certificate), so I figured I would need the CA. I gathered the CA, so in the file I have: Certificate Private Key Certificate GeoTrust CA Where is the default location to install other CA's and/or chained certs? Thanks!

1 0

RE: [stunnel-users] Static Version Built?
by Kevin A. McGrail 15 Mar '06

15 Mar '06

That would be my guess but the last time I wanted static binaries was Redhat 2.1 on a DEC Alpha-based machine, sorry. -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Hal Vaughan Sent: Wednesday, March 15, 2006 1:25 PM To: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] Static Version Built? On Wednesday 15 March 2006 13:04, Kevin A. McGrail wrote: > Do you have static libraries in your SSL lib or just shared libraries? > i.e. libssl.a (static) and libssl.so (dynamic) or just one or the > other? > > Have you tested with ldd? > > For example, on my machine, I get this showing me I'm linking > dynamically. > > ldd /usr/sbin/stunnel > libutil.so.1 => /lib/libutil.so.1 (0x40023000) > libpthread.so.0 => /lib/i686/libpthread.so.0 (0x40027000) > libnsl.so.1 => /lib/libnsl.so.1 (0x4003b000) > libdl.so.2 => /lib/libdl.so.2 (0x40050000) > libssl.so.2 => /lib/libssl.so.2 (0x40053000) > libcrypto.so.2 => /lib/libcrypto.so.2 (0x40080000) > libc.so.6 => /lib/i686/libc.so.6 (0x42000000) > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) > > Regards, > KAM Yes, I'm getting the same thing, so it's linking to the shared libraries, even though in the cases I've checked, I have the static libraries. Hal _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

RE: [stunnel-users] Static Version Built?
by Kevin A. McGrail 15 Mar '06

15 Mar '06

Do you have static libraries in your SSL lib or just shared libraries? i.e. libssl.a (static) and libssl.so (dynamic) or just one or the other? Have you tested with ldd? For example, on my machine, I get this showing me I'm linking dynamically. ldd /usr/sbin/stunnel libutil.so.1 => /lib/libutil.so.1 (0x40023000) libpthread.so.0 => /lib/i686/libpthread.so.0 (0x40027000) libnsl.so.1 => /lib/libnsl.so.1 (0x4003b000) libdl.so.2 => /lib/libdl.so.2 (0x40050000) libssl.so.2 => /lib/libssl.so.2 (0x40053000) libcrypto.so.2 => /lib/libcrypto.so.2 (0x40080000) libc.so.6 => /lib/i686/libc.so.6 (0x42000000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) Regards, KAM -----Original Message----- From: Hal Vaughan [mailto:hal@thresholddigital.com] Sent: Wednesday, March 15, 2006 12:55 PM To: Kevin A. McGrail Subject: Re: [stunnel-users] Static Version Built? On Wednesday 15 March 2006 12:24, you wrote: > It's not going to use source. It's going to use headers and compiled > libraries. Specifying it just helps point it to the correct headers > and libraries if you for example, have them installed in an unusual > place or have more than one set on your machine. Does it link to those libs or incorporate them into the binary (if I'm building static with the correct command line options)? Sorry to ask so many questions, but I've had no experience in C or C++. Thanks, Hal

2 1

Static Version Built?
by Hal Vaughan 15 Mar '06

15 Mar '06

Okay, I think I have a static version of Stunnel now. Thanks to help and answers from Jan and Keven! I did this: ./configure --with-ssl=/usr --enable-static --disable-shared --disable-libwrap I'm not sure about the "--with-ssl" option, but it didn't seem to want to work without it. So I have a few questions: 1) How can I be sure it is static? 2) If it isn't static and I run it on a system that does not have all it needs, will it give me errors immediately, or only if a subroutine needs a library that isn't there. 3) Does the "--disable-libwrap" or anything else remove any features? 4) Does using the "--with-ssl" option make it use the libs on my system and make it non-static? 5) My "best guess" is that to install a static version, I just copy over the files src/stunnel and src/libstunnel.la to /usr/bin and /usr/lib, respectively. Is that right? (And, of course, copy man files to the right place.) Thanks -- I hope I'll be done with all these questions soon. Hal

2 4

Logging change in 4.15
by MeeAGhost 15 Mar '06

15 Mar '06

Running 4.15 the messages below being written to STDOUT whenever I start stunnel but not written to the the file defined by output in the .conf file. In prior versions the messages were written to whatever I had defined output to equal. 2006.03.14 19:40:03 LOG7[11513:1]: Snagged 64 random bytes from /export/home/ghost/.rnd 2006.03.14 19:40:03 LOG7[11513:1]: Wrote 1024 new random bytes to /export/home/ghost/.rnd 2006.03.14 19:40:03 LOG7[11513:1]: RAND_status claims sufficient entropy for the PRNG 2006.03.14 19:40:03 LOG6[11513:1]: PRNG seeded successfully 2006.03.14 19:40:03 LOG7[11513:1]: Certificate: /usr/local/etc/stunnel/server.pem 2006.03.14 19:40:03 LOG7[11513:1]: Key file: /usr/local/etc/stunnel/server.pem 2006.03.14 19:40:03 LOG7[11513:1]: Loaded verify certificates from /usr/local/etc/stunnel/cacert.pem 2006.03.14 19:40:03 LOG7[11513:1]: Verify directory set to /usr/local/etc/stunnel/certificates 2006.03.14 19:40:03 LOG5[11513:1]: Peer certificate location /usr/local/etc/stunnel/certificates I looked in ctx.c and ssl.c at the calls to s_log (in log.c) but wasn't able to determine what would cause some messages to be written to the output file and the messages above to be written to STDOUT. I think it has to do with file_putline not being passed the output file name. Anyone else seeing this behavior? -- Chris

2 1

What is "lwrap"? (compiling problem)
by Hal Vaughan 15 Mar '06

15 Mar '06

I keep getting a message: /usr/bin/ld: cannot find -lwrap when I try make. I had to use: ./configure --with-ssl=/usr and it worked, but I keep getting the above error message. I've Googled for it and it seems to reference an SSL library, but it looks like I've got them all installed (unless it needs Python SSL libraries). Thanks! Hal

1 0

SSL Libraries on Debian
by Hal Vaughan 14 Mar '06

14 Mar '06

I tried compiling Stunnel on Debian and get an error -- I need the ssl libraries. I tried ./configure --with-ssl=/usr/lib/ssl, which is where libssl-dev was installed, and it doesn't help. There is a libssl file in /usr/lib, but --with-ssl=/usr/lib/ssl doesn't seem to work either. What package on Debian provides the needed headers (according to aptitude, libssl-dev, the one I installed, does, but experience is telling me otherwise). (This, btw, is why I am trying to make static binaries -- you can never tell what to expect on Linux systems at this point. Often config/make doesn't work and there are many times when packages don't work out for one reason or another.) Thanks for any help on this. Hal

3 4

stunnel 4.14 died silently under traffic stress test
by Zhuang Yuyao 14 Mar '06

14 Mar '06

Hi, While doing apache benchmark test, stunnel 4.14 died silently. Network topo: client(192.168.20.81 debian running ab2) ---(https)---> gateway(192.168.20.1 running stunnel in server mode) ---(http)---> web server(192.168.10.254) Gateway hardware: 80386 compatible cpu (VIA C3 400Mhz); RAM: 64M stunnel.conf: ############################### ..... compression = zlib client = no ciphers = DES-CBC3-SHA:DES-CBC3-MD5 verify = 1 [test] accept = 443 connect = 192.168.10.254:80 TIMEOUTclose = 0 ############################### Web Server hardware: Dell 2850 with 2G RAM. test_100k.html is a html file whose size is 100k bytes. test_4k.html is a html file whose size is 4k bytes. In client, I am using ab2 as the stress test tool: #ab2 -n 200 -c 100 https://192.168.20.1:443/test_4k.html (means 200 request and 100 concurrency) successfully finished. #ab2 -n 200 -c 100 https://192.168.20.1:443/test_100k.html (means 200 request and 100 concurrency) stunnel died after a few seconds, running log shows: 2006.03.09 15:20:39 LOG5[6962:1024]: stunnel 4.14 on i386-pc-linux-gnu PTHREAD+POLL+IPv4 with OpenSSL 0.9.7i 14 Oct 2005 2006.03.09 15:20:39 LOG5[6962:1024]: 500 clients allowed 2006.03.09 15:20:53 LOG5[6964:1026]: test connected from 192.168.20.81:50186 2006.03.09 15:20:53 LOG5[6965:2051]: test connected from 192.168.20.81:50187 2006.03.09 15:20:53 LOG5[6966:3076]: test connected from 192.168.20.81:50188 2006.03.09 15:20:53 LOG5[6967:4101]: test connected from 192.168.20.81:50189 2006.03.09 15:20:53 LOG5[6968:5126]: test connected from 192.168.20.81:50190 2006.03.09 15:20:54 LOG5[6969:6151]: test connected from 192.168.20.81:50191 2006.03.09 15:20:54 LOG5[6970:7176]: test connected from 192.168.20.81:50192 2006.03.09 15:20:54 LOG5[6971:8201]: test connected from 192.168.20.81:50193 2006.03.09 15:20:54 LOG5[6972:9226]: test connected from 192.168.20.81:50194 2006.03.09 15:20:54 LOG5[6973:10251]: test connected from 192.168.20.81:50195 2006.03.09 15:20:54 LOG5[6974:11276]: test connected from 192.168.20.81:50196 2006.03.09 15:20:54 LOG5[6975:12301]: test connected from 192.168.20.81:50197 2006.03.09 15:20:54 LOG5[6976:13326]: test connected from 192.168.20.81:50198 2006.03.09 15:20:54 LOG5[6977:14351]: test connected from 192.168.20.81:50199 2006.03.09 15:20:54 LOG5[6978:15376]: test connected from 192.168.20.81:50200 2006.03.09 15:20:54 LOG5[6979:16401]: test connected from 192.168.20.81:50201 2006.03.09 15:20:54 LOG5[6980:17426]: test connected from 192.168.20.81:50202 2006.03.09 15:20:54 LOG5[6981:18451]: test connected from 192.168.20.81:50203 2006.03.09 15:20:54 LOG5[6982:19476]: test connected from 192.168.20.81:50204 2006.03.09 15:20:54 LOG5[6983:20501]: test connected from 192.168.20.81:50205 2006.03.09 15:20:54 LOG5[6984:21526]: test connected from 192.168.20.81:50206 2006.03.09 15:20:54 LOG5[6985:22551]: test connected from 192.168.20.81:50207 2006.03.09 15:20:54 LOG5[6986:23576]: test connected from 192.168.20.81:50208 2006.03.09 15:20:54 LOG5[6987:24601]: test connected from 192.168.20.81:50209 2006.03.09 15:20:54 LOG5[6988:25626]: test connected from 192.168.20.81:50210 2006.03.09 15:20:54 LOG5[6989:26651]: test connected from 192.168.20.81:50211 2006.03.09 15:20:54 LOG5[6990:27676]: test connected from 192.168.20.81:50212 2006.03.09 15:20:54 LOG5[6991:28701]: test connected from 192.168.20.81:50213 2006.03.09 15:20:54 LOG5[6992:29726]: test connected from 192.168.20.81:50214 2006.03.09 15:20:54 LOG5[6993:30751]: test connected from 192.168.20.81:50215 2006.03.09 15:20:54 LOG5[6994:31776]: test connected from 192.168.20.81:50216 2006.03.09 15:20:54 LOG5[6995:32801]: test connected from 192.168.20.81:50217 2006.03.09 15:20:54 LOG5[6996:33826]: test connected from 192.168.20.81:50218 2006.03.09 15:20:54 LOG5[6997:34851]: test connected from 192.168.20.81:50219 2006.03.09 15:20:54 LOG5[6998:35876]: test connected from 192.168.20.81:50220 2006.03.09 15:20:54 LOG5[6999:36901]: test connected from 192.168.20.81:50221 2006.03.09 15:20:54 LOG5[7000:37926]: test connected from 192.168.20.81:50222 2006.03.09 15:20:54 LOG5[7001:38951]: test connected from 192.168.20.81:50223 2006.03.09 15:20:54 LOG5[7002:39976]: test connected from 192.168.20.81:50224 2006.03.09 15:20:54 LOG5[7003:41001]: test connected from 192.168.20.81:50225 2006.03.09 15:20:54 LOG5[7004:42026]: test connected from 192.168.20.81:50226 2006.03.09 15:20:55 LOG5[7005:43051]: test connected from 192.168.20.81:50227 2006.03.09 15:20:55 LOG5[7006:44076]: test connected from 192.168.20.81:50228 2006.03.09 15:20:55 LOG5[7007:45101]: test connected from 192.168.20.81:50229 2006.03.09 15:20:55 LOG5[7008:46126]: test connected from 192.168.20.81:50230 2006.03.09 15:20:55 LOG5[7009:47151]: test connected from 192.168.20.81:50231 2006.03.09 15:20:55 LOG5[7010:48176]: test connected from 192.168.20.81:50232 2006.03.09 15:20:55 LOG5[7011:49201]: test connected from 192.168.20.81:50233 2006.03.09 15:20:55 LOG5[7012:50226]: test connected from 192.168.20.81:50234 2006.03.09 15:20:55 LOG5[7013:51251]: test connected from 192.168.20.81:50235 2006.03.09 15:20:55 LOG5[7014:52276]: test connected from 192.168.20.81:50236 2006.03.09 15:20:55 LOG5[7015:53301]: test connected from 192.168.20.81:50237 2006.03.09 15:20:55 LOG5[7016:54326]: test connected from 192.168.20.81:50238 2006.03.09 15:20:55 LOG5[7017:55351]: test connected from 192.168.20.81:50239 2006.03.09 15:20:55 LOG5[7018:56376]: test connected from 192.168.20.81:50240 2006.03.09 15:20:55 LOG5[7019:57401]: test connected from 192.168.20.81:50241 2006.03.09 15:20:55 LOG5[7020:58426]: test connected from 192.168.20.81:50242 2006.03.09 15:20:55 LOG5[7021:59451]: test connected from 192.168.20.81:50243 2006.03.09 15:20:55 LOG5[7022:60476]: test connected from 192.168.20.81:50244 2006.03.09 15:20:55 LOG5[7023:61501]: test connected from 192.168.20.81:50245 2006.03.09 15:20:55 LOG5[7024:62526]: test connected from 192.168.20.81:50246 Killed It looks like that is resource on gateway is exhausted under such a traffic, but my question is: why stunnel just died instead of rejecting further connections. Thanks very much. Zhuang Yuyao

2 7

Static Binaries for Linux? (Didn't get answer previously)
by Hal Vaughan 13 Mar '06

13 Mar '06

I've brought this up before and didn't get ANY answer at all, and I'm sure someone involved with Stunnel would at least know if what I'm asking is possible. I know help is given on a volunteer basis, so if someone could help me figure this out, it would be a huge help. So far I've spent over a week on getting Stunnel or another program to do the job and if I can't get this to work, I need to just drop Stunnel and figure out how to do the same thing in Java. So thanks for any help. I may need to include Stunnel with my application so my clients behind restrictive firewalls can still enable me to work on their systems with RealVNC. I'm working with clients on both Windows and Linux. Is there a way to get static binaries for Linux? I don't know C or C++ or much more than running ./configure && make && make install. I'd like to know if it is possible or what is needed to create static binaries of the files so I could easily install stunnel on any Linux system by just copying over the proper files. Also, what archive format does the Windows installer use? I'd like to do something similar for Windows, so if I could pull the files out of the installer and copy them over myself, it would be a huge help. Thanks! Hal

3 4

Compile failure with 4.15
by MeeAGhost 13 Mar '06

13 Mar '06

I ran ./configure --enable-dh --disable-libwrap then when I try to execute make the build fails: [...] if gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.15\" -DPACKAGE_STRING=\"stunnel\ 4.15\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.15\" -DHOST=\"sparc-sun-solaris2.9\" -DCPU_SPARC=1 -DVENDOR_SUN=1 -DOS_SOLARIS2_9=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DHAVE_LIBNSL=1 -DHAVE_LIBSOCKET=1 -DHAVE_LIBDL=1 -DHAVE_LIBZ=1 -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_FILIO_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_GETCONTEXT=1 -DHAVE___MAKECONTEXT_V2=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETADDRINFO=1 -DHAVE_GETNAMEINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/usr/local\" -DHAVE_OSSL_ENGINE_H=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DUSE_DH=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/usr/local/include -MT ctx.o -MD -MP -MF ".deps/ctx.Tpo" -c -o ctx.o ctx.c; \ then mv -f ".deps/ctx.Tpo" ".deps/ctx.Po"; else rm -f ".deps/ctx.Tpo"; exit 1; fi ctx.c: In function `init_dh': ctx.c:170: error: `section' undeclared (first use in this function) ctx.c:170: error: (Each undeclared identifier is reported only once ctx.c:170: error: for each function it appears in.) ctx.c:198: error: `ctx' undeclared (first use in this function) ctx.c: In function `crl_callback': ctx.c:491: warning: cast increases required alignment of target type make[1]: *** [ctx.o] Error 1 make[1]: Leaving directory `/tmp/stunnel-4.15/src' make: *** [all-recursive] Error 1 I checked ctx.c and couldn't see where section and ctx are being defined inside of the init_dh function nor could I see them defined in the header files. Am I missing something? TIA for any assistance. -- Chris

2 1

Rainbow Technologies CryptoSwift CS200 driver
by Michal Trojnara 11 Mar '06

11 Mar '06

Dear Users, I just bought a second-hand Rainbow Technologies CryptoSwift CS200 card to test engine support for stunnel. Unfortunately I can't find any Linux/Windows driver for this card. Do you have one? Please help. Best regards, Mike

2 1

stunnel 4.15 released
by Michal Trojnara 11 Mar '06

11 Mar '06

Version 4.15, 2006.03.11, urgency: LOW: * Release notes - There are a lot of new features in this version. I recommend to test it well before upgrading your mission-critical systems. * Bugfixes - Fix for pthreads on Solaris 10 (thx to Hans Werner Strube <strube(a)physik3.gwdg.de>). - Attempt to autodetect socklen_t type in configure script. - Default threading model changed to pthread for better portability. - DH parameters are not included in the certificate by default. * New features sponsored by Software House http://www.swhouse.com/ - Most SSL-related options (including client, cert, key) are now available on service level, so it is possible to have an SSL client and an SSL server in a single stunnel process. - Windows CE (version 3.0 and higher) support. * New features - Client mode CONNECT protocol support (RFC 2817 section 5.2). http://www.ietf.org/rfc/rfc2817.txt - Retrying exec+connect services added. * File locations are more compliant to Filesystem Hierarchy Standard 2.3 - configuration and certificates are in $prefix/etc/stunnel/ - binaries are in $prefix/sbin/ - default pid file is $prefix/var/run/stunnel.pid - manual is $prefix/man/man8/stunnel.8 - other docs are in $prefix/share/doc/stunnel/ - libstunnel is in $prefix/lib - chroot directory is setup in $prefix/var/lib/stunnel/ this directory is chmoded 1770 and group nogroup sha1sum for stunnel-4.15.tar.gz: 735406c1ca94904581158a434214e1f6568539d0 Home page: http://stunnel.mirt.net/ Download: ftp://stunnel.mirt.net/stunnel/ Best regards, Mike

1 0

"STACK_RESERVE is too high" after every connect
by Rob Munsch 10 Mar '06

10 Mar '06

Hello. I've recently gone on a self-inflicted crash course on openssl and seem to have gotten a centralized logging system going, logging to MySQL. I'm seeing everything i'd expect to see, but with an extra bit: what is STACK_RESERVE, and why is it too high? Some context, mildly sanitized: |Mar 9 18:33:34 isis stunnel: LOG5[24810:6]: syslog-ng connected from x.x.x.x:44032| |Mar 9 18:33:34 isis stunnel: LOG5[24810:6]: VERIFY OK: depth=1, /C=US/ST=Pennsylvania/L=Philadelphia/O=Solutions for Progress/CN=blah.com/emailAddress=blah@blah| |Mar 9 18:33:34 isis stunnel: LOG5[24810:6]: VERIFY OK: depth=0, /C=US/ST=Pennsylvania/O=Solutions for Progress/OU=IT/CN=IT/emailAddress=blah@blah| |Mar 9 20:39:02 isis stunnel: LOG5[24810:6]: Connection closed: 0 bytes sent to SSL, 2891 bytes sent to socket| |Mar 9 20:39:02 isis stunnel: LOG3[24810:6]: STACK_RESERVE is too high| this is daemon.log on the server machine (isis). Messages from the remote host are going to MySQL successfully. But at the end of every apparently-successful transaction, there's this stack complaint. Can't find anything in the archives or via Google for "stunnel stack_reserve," which i found really odd, which is why i'm here... Version output: stunnel 4.14 on i686-pc-linux-gnu UCONTEXT+POLL+IPv4 with OpenSSL 0.9.7g 11 Apr 2005 Thanks! -- Rob Munsch Solutions For Progress IT

2 1

RE: How to get tcpwrappers configured/compiled into stunnel 4.04 on Tru64 UNIX 5.1B
by John Lanier 08 Mar '06

08 Mar '06

Hello, I am a newbie to stunnel and tcpwrappers, so please bear with me: I am trying to compile tcpwrapper support into stunnel v4.04 on Tru64 UNIX v5.1B (apparently v4.14 does not compile on 5.1A or higher, per http://stunnel.mirt.net/pipermail/stunnel-users/2006-January/000935.html). I am having what appears to be problems getting tcpwrapper support to compile with 4.04. I have consulted the following resources, but I am still having problems: ------------------------------------------------------------------------------------------------------- 1. http://www.stunnel.org/faq/troubleshooting.html#ToC9 "configure isn't finding my TCP Wrapper installation" Solution: You probably have it in a non-standard place, ie somewhere that gcc can't find it on it's own. Let's say you had your tcp wrappers installed in /opt/tcpd_7.6. To help gcc find your include files and libraries, you'd want to set three environment variables as follows: CFLAGS="$CFLAGS -I/opt/tcpd_7.6/include" CPPFLAGS="$CPPFLAGS -I/opt/tcpd_7.6/include" LDFLAGS="$LDFLAGS -L/opt/tcpd_7.6/lib" export CFLAGS CPPFLAGS LDFLAGS And then re-run configure. This is the generic way to have configure find specific libraries, and is not specific to Stunnel itself. 2. http://www.stunnel.org/faq/run.html#ToC5 "Running stunnel with TCP wrappers" You do not need to use the tcpd binary to wrap stunnel (although you could). You can can compile in support for TCP wrappers when you compile stunnel itself. The configure program should be able to determine if the libwrap library (-lwrap) and headers are available in standard locations. ............. I have openssl 0.9.7h installed on ccpe01 v51b pk#5, with tcp-wrappers7.6. I did the configure, make and make install and things. All stages appeared successful, but then I attempted the ./configure --with-tcp-wrappers and it errored with -lwrap not found. checking for SSL directory... /usr/local/ssl checking for "/dev/urandom"... yes checking whether to disable RSA support... no checking whether to enable DH support... no checking for gethostbyname in -lnsl... no checking for socket in -lsocket... no checking for pthread_create in -lpthread... no checking for pthread_create in -lc_r... no checking for openpty in -lutil... yes checking whether to use the libwrap (TCP wrappers) library... yes checking for hosts_access in -lwrap... not found <-- .............. So then I tried assigning the 3 environment variables and things got worse. The include and lib directories are referenced for tcpd 7.6, but after installing tcp wrappers I do not find include or lib directories for tcpd. Q: Should I expect NOT to see the include or lib directories as defined in #1 above, and, if so, will specifying the absolute path to the tcpwrapper images (EX: /var/tcp_wrappers/tcp_wrappers_7.6) suffice? 3. I followed these instructions when compiling/configuring tcpd v7.6 (downloaded from ftp://ftp.porcupine.org/pub/security/index.html): ............ 7.1 - Easy configuration and installation ----------------------------------------- The "easy" recipe requires no changes to existing software or configuration files. Basically, you move the daemons that you want to protect to a different directory and plug the resulting holes with copies of the wrapper programs. If you don't run Ultrix, you won't need the miscd wrapper program. The miscd daemon implements among others the SYSTAT service, which produces the same output as the WHO command. Type `make' and follow the instructions. The Makefile comes with ready-to-use templates for many common UNIX implementations (sun, ultrix, hp-ux, aix, irix,...). .............. Thanks in advance for any guidance and/or advice that you can offer. --John Lanier

1 0

Special Installs -- Static Binaries and Required Files
by Hal Vaughan 08 Mar '06

08 Mar '06

I may need to include Stunnel with my application so my clients behind restrictive firewalls can still enable me to work on their systems with RealVNC. I'm working with clients on both Windows and Linux. Windows: I know the installer has the files included in it in an archive, but what archive format is it, or what kind or archive program on Linux can I use to read it? Is installing Stunnel on Windows just a matter of copying the files, or are there settings I have to change in the registry? Linux: Is there any way to get static binaries (yes, I know they're bigger) so I can just copy over files to install it as a program (not as a service -- I noticed Debian set it up as a service)? Thanks! Hal

1 0

Stunnel Won't Start on Linux (even with fixed /etc/default/stunnel)
by Hal Vaughan 08 Mar '06

08 Mar '06

I'm trying to start stunnel4 on Linux. I've modified the /etc/stunnel/stunnel.conf file so I can use it with RealVNC. When I run "stunnel4 /etc/stunnel/stunnel.conf" or "/etc/init.d/stunnel4 start", neither command gives me errors or any output, even with -d 7 set. After the shell returns control to me, I do "ps -ax" and have yet to see any instance of stunnel running. There is never a file in /var/run/stunnel to indicate a working daemon if I start it as one. I have edited /etc/default/stunnel4 to look like this (changed ENABLED). I've included it and my /etc/stunnel/stunnel.conf below. No matter what I do, there is never any evidence that stunnel is staring or doing anything. Even error messages would be a big help, so I'd at least know what was wrong. Any help appreciated. I'm sure it's something so obvious I don't see how I could miss it. Thanks for any help. Hal -----------------/etc/default/stunnel4------------------------ # /etc/default/stunnel # Julien LEMOINE <speedblue(a)debian.org> # September 2003 # Change to one to enable stunnel ENABLED=1 FILES="/etc/stunnel/*.conf" OPTIONS="" # Change to one to enable ppp restart scripts PPP_RESTART=0 ------------/etc/stunnel/stunnel.conf-------------------- CAfile = /etc/stunnel/CAcert.pem CApath = /etc/stunnel/ cert = server.pem client = no verify = 3 debug = 7 [vnc] accept = 443 connect = 127.0.0.1:5500

2 2

RE: [stunnel-users] Re: Can stunnel do this?
by Matteo D'Amato 07 Mar '06

07 Mar '06

Here is what I'm getting Insude stunnel.conf file: cert=/usr/local/etc/stunnel/stunnel.pem cafile=/usr/local/etc/stunnel/stunnel.pem output=/var/log/stunnel.log client=yes debug=7 [1440] accept=10.10.10.2:1440 connect=192.168.19.50:1078 Launched using: stunnel /etc/stunnel/stunnel.conf -p /usr/local/etc/stunnel/stunnel.pem Log file: 2006.03.07 08:30:01 LOG5[13209:0]: Received signal 15; terminating 2006.03.07 08:30:01 LOG7[13209:0]: removing pid file /usr/local/var/stunnel/stunnel.pid 2006.03.07 08:30:20 LOG5[13219:1]: stunnel 4.14 on i686-pc-linux-gnu UCONTEXT+POLL+IPv4+LIBWRAP with OpenSSL 0.9.7a Feb 19 2003 2006.03.07 08:30:20 LOG7[13219:1]: Snagged 64 random bytes from /root/.rnd 2006.03.07 08:30:20 LOG7[13219:1]: Wrote 1024 new random bytes to /root/.rnd 2006.03.07 08:30:20 LOG7[13219:1]: RAND_status claims sufficient entropy for the PRNG 2006.03.07 08:30:20 LOG6[13219:1]: PRNG seeded successfully 2006.03.07 08:30:20 LOG7[13219:1]: Certificate: /usr/local/etc/stunnel/stunnel.pem 2006.03.07 08:30:20 LOG7[13219:1]: Key file: /usr/local/etc/stunnel/stunnel.pem 2006.03.07 08:30:20 LOG6[13219:1]: file ulimit = 1024 (can be changed with 'ulimit -n') 2006.03.07 08:30:20 LOG6[13219:1]: poll() used - no FD_SETSIZE limit for file descriptors 2006.03.07 08:30:20 LOG5[13219:1]: 500 clients allowed 2006.03.07 08:30:20 LOG7[13219:1]: FD 4 in non-blocking mode 2006.03.07 08:30:20 LOG7[13219:1]: FD 5 in non-blocking mode 2006.03.07 08:30:20 LOG7[13219:1]: FD 6 in non-blocking mode 2006.03.07 08:30:20 LOG7[13219:1]: SO_REUSEADDR option set on accept socket 2006.03.07 08:30:20 LOG7[13219:1]: 1440 bound to 10.10.10.2:1440 2006.03.07 08:30:20 LOG7[13220:1]: Created pid file /usr/local/var/stunnel/stunnel.pid 2006.03.07 08:30:20 LOG7[13220:0]: Waiting -1 second(s) for 2 file descriptor(s) 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->(IN) 2006.03.07 08:31:46 LOG7[13220:1]: 1440 accepted FD=7 from 10.10.10.100:1049 2006.03.07 08:31:46 LOG7[13220:1]: Creating a new context 2006.03.07 08:31:46 LOG7[13220:1]: Context 2 created 2006.03.07 08:31:46 LOG7[13220:2]: Context swap: 1 -> 2 2006.03.07 08:31:46 LOG7[13220:2]: 1440 started 2006.03.07 08:31:46 LOG7[13220:2]: FD 7 in non-blocking mode 2006.03.07 08:31:46 LOG7[13220:2]: FD 8 in non-blocking mode 2006.03.07 08:31:46 LOG7[13220:2]: FD 9 in non-blocking mode 2006.03.07 08:31:46 LOG7[13221:0]: Waiting 300 second(s) for 3 file descriptor(s) 2006.03.07 08:31:46 LOG7[13221:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:46 LOG7[13221:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:46 LOG7[13221:0]: CONTEXT 2, FD=9, (OUT)->(OUT) 2006.03.07 08:31:46 LOG7[13220:0]: Waiting 300 second(s) for 3 file descriptor(s) 2006.03.07 08:31:46 LOG7[13220:0]: Cleaning up the signal pipe 2006.03.07 08:31:46 LOG6[13220:0]: Child process 13221 finished with code 0 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 2, FD=8, (IN)->(INHUP) 2006.03.07 08:31:46 LOG7[13220:2]: Connection from 10.10.10.100:1049 permitted by libwrap 2006.03.07 08:31:46 LOG5[13220:2]: 1440 connected from 10.10.10.100:1049 2006.03.07 08:31:46 LOG7[13220:2]: FD 8 in non-blocking mode 2006.03.07 08:31:46 LOG7[13220:2]: 1440 connecting 192.168.19.50:1078 2006.03.07 08:31:46 LOG7[13220:2]: connect_wait: waiting 10 seconds 2006.03.07 08:31:46 LOG7[13220:0]: Waiting 10 second(s) for 3 file descriptor(s) 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:46 LOG7[13220:0]: CONTEXT 2, FD=8, (INOUT)->(OUT) 2006.03.07 08:31:46 LOG7[13220:2]: connect_wait: connected 2006.03.07 08:31:46 LOG7[13220:2]: Remote FD=8 initialized 2006.03.07 08:31:46 LOG7[13220:2]: SSL state (connect): before/connect initialization 2006.03.07 08:31:46 LOG7[13220:2]: SSL state (connect): SSLv3 write client hello A 2006.03.07 08:31:46 LOG7[13220:0]: Waiting 300 second(s) for 3 file descriptor(s) 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->(IN) 2006.03.07 08:31:47 LOG7[13220:1]: CONTEXT 2, FD=8, (IN)->() 2006.03.07 08:31:47 LOG7[13220:1]: Context swap: 2 -> 1 2006.03.07 08:31:47 LOG7[13220:1]: Current context: 1 2006.03.07 08:31:47 LOG7[13220:1]: 1440 accepted FD=9 from 10.10.10.100:1050 2006.03.07 08:31:47 LOG7[13220:1]: Creating a new context 2006.03.07 08:31:47 LOG7[13220:1]: Context 3 created 2006.03.07 08:31:47 LOG7[13220:3]: Context swap: 1 -> 3 2006.03.07 08:31:47 LOG7[13220:3]: 1440 started 2006.03.07 08:31:47 LOG7[13220:3]: FD 9 in non-blocking mode 2006.03.07 08:31:47 LOG7[13220:3]: FD 10 in non-blocking mode 2006.03.07 08:31:47 LOG7[13220:3]: FD 11 in non-blocking mode 2006.03.07 08:31:47 LOG7[13222:0]: Waiting 299 second(s) for 4 file descriptor(s) 2006.03.07 08:31:47 LOG7[13222:0]: CONTEXT 2, FD=8, (IN)->() 2006.03.07 08:31:47 LOG7[13222:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:47 LOG7[13222:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:47 LOG7[13222:0]: CONTEXT 3, FD=11, (OUT)->(OUT) 2006.03.07 08:31:47 LOG7[13220:0]: Waiting 299 second(s) for 4 file descriptor(s) 2006.03.07 08:31:47 LOG7[13220:0]: Cleaning up the signal pipe 2006.03.07 08:31:47 LOG6[13220:0]: Child process 13222 finished with code 0 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 2, FD=8, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 3, FD=10, (IN)->(INHUP) 2006.03.07 08:31:47 LOG7[13220:3]: Connection from 10.10.10.100:1050 permitted by libwrap 2006.03.07 08:31:47 LOG5[13220:3]: 1440 connected from 10.10.10.100:1050 2006.03.07 08:31:47 LOG7[13220:3]: FD 10 in non-blocking mode 2006.03.07 08:31:47 LOG7[13220:3]: 1440 connecting 192.168.19.50:1078 2006.03.07 08:31:47 LOG7[13220:3]: connect_wait: waiting 10 seconds 2006.03.07 08:31:47 LOG7[13220:0]: Waiting 10 second(s) for 4 file descriptor(s) 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 2, FD=8, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 3, FD=10, (INOUT)->(OUT) 2006.03.07 08:31:47 LOG7[13220:3]: connect_wait: connected 2006.03.07 08:31:47 LOG7[13220:3]: Remote FD=10 initialized 2006.03.07 08:31:47 LOG7[13220:3]: SSL state (connect): before/connect initialization 2006.03.07 08:31:47 LOG7[13220:3]: SSL state (connect): SSLv3 write client hello A 2006.03.07 08:31:47 LOG7[13220:0]: Waiting 299 second(s) for 4 file descriptor(s) 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 2, FD=8, (IN)->(IN) 2006.03.07 08:31:47 LOG7[13220:2]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:47 LOG7[13220:2]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:47 LOG7[13220:2]: CONTEXT 3, FD=10, (IN)->() 2006.03.07 08:31:47 LOG7[13220:2]: Context swap: 3 -> 2 2006.03.07 08:31:47 LOG7[13220:2]: Current context: 2 2006.03.07 08:31:47 LOG7[13220:0]: Waiting 300 second(s) for 4 file descriptor(s) 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:31:47 LOG7[13220:0]: CONTEXT 3, FD=10, (IN)->(IN) 2006.03.07 08:31:47 LOG7[13220:3]: CONTEXT 2, FD=8, (IN)->() 2006.03.07 08:31:47 LOG7[13220:3]: Context swap: 2 -> 3 2006.03.07 08:31:47 LOG7[13220:3]: Current context: 3 2006.03.07 08:31:47 LOG7[13220:0]: Waiting 300 second(s) for 4 file descriptor(s) 2006.03.07 08:32:02 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:32:02 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:32:02 LOG7[13220:0]: CONTEXT 2, FD=8, (IN)->(IN) 2006.03.07 08:32:02 LOG7[13220:2]: CONTEXT 3, FD=10, (IN)->() 2006.03.07 08:32:02 LOG7[13220:2]: Context swap: 3 -> 2 2006.03.07 08:32:02 LOG7[13220:2]: Current context: 2 2006.03.07 08:32:02 LOG7[13220:0]: Waiting 285 second(s) for 4 file descriptor(s) 2006.03.07 08:32:02 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:32:02 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:32:02 LOG7[13220:0]: CONTEXT 3, FD=10, (IN)->(IN) 2006.03.07 08:32:02 LOG7[13220:3]: CONTEXT 2, FD=8, (IN)->() 2006.03.07 08:32:02 LOG7[13220:3]: Context swap: 2 -> 3 2006.03.07 08:32:02 LOG7[13220:3]: Current context: 3 2006.03.07 08:32:02 LOG7[13220:0]: Waiting 300 second(s) for 4 file descriptor(s) 2006.03.07 08:32:17 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:32:17 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:32:17 LOG7[13220:0]: CONTEXT 2, FD=8, (IN)->(IN) 2006.03.07 08:32:17 LOG7[13220:2]: CONTEXT 3, FD=10, (IN)->() 2006.03.07 08:32:17 LOG7[13220:2]: Context swap: 3 -> 2 2006.03.07 08:32:17 LOG7[13220:2]: Current context: 2 2006.03.07 08:32:17 LOG7[13220:2]: SSL alert (write): fatal: handshake failure 2006.03.07 08:32:17 LOG3[13220:2]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2006.03.07 08:32:17 LOG7[13220:2]: 1440 finished (1 left) 2006.03.07 08:32:17 LOG5[13220:2]: stack_info: size=65536, current=4208 (6%), maximum=4208 (6%) 2006.03.07 08:32:17 LOG7[13220:2]: Context 2 closed 2006.03.07 08:32:17 LOG7[13220:0]: Waiting 285 second(s) for 3 file descriptor(s) 2006.03.07 08:32:17 LOG7[13220:0]: CONTEXT 1, FD=4, (IN)->() 2006.03.07 08:32:17 LOG7[13220:0]: CONTEXT 1, FD=6, (IN)->() 2006.03.07 08:32:17 LOG7[13220:0]: CONTEXT 3, FD=10, (IN)->(IN) 2006.03.07 08:32:17 LOG7[13220:3]: Context set: 2 (dropped) -> 3 2006.03.07 08:32:17 LOG7[13220:3]: Current context: 3 2006.03.07 08:32:17 LOG7[13220:3]: Releasing context 2 2006.03.07 08:32:17 LOG7[13220:3]: SSL alert (write): fatal: handshake failure 2006.03.07 08:32:17 LOG3[13220:3]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2006.03.07 08:32:17 LOG7[13220:3]: 1440 finished (0 left) 2006.03.07 08:32:17 LOG5[13220:3]: stack_info: size=65536, current=4208 (6%), maximum=4208 (6%) 2006.03.07 08:32:17 LOG7[13220:3]: Context 3 closed 2006.03.07 08:32:17 LOG7[13220:0]: Waiting -1 second(s) for 2 file descriptor(s) --Matteo D'Amato

1 0

RE: [stunnel-users] Re: Can stunnel do this?
by Kevin A. McGrail 07 Mar '06

07 Mar '06

This sounds like exactly what stunnel does. You want to have host A talk to Server A via SSL so you run stunneld on it. Then it will redirect that connection to server B via non-SSL. What protocol are we talking about here? Let's assume it's https: On Server A, setup stunnel with a conf file with these lines (as well as many others surely) [https] accept = 443 connect = serverb.smartbox.ca:80 Then your host connects to server a, negotiates SSL and the information is sent to the other server. I think your biggest issue is going to be the certificate on Server A so that the Host connects to the Server without certificate issues. Sincerely, Kevin A. McGrail aka KAM > -----Original Message----- > From: stunnel-users-bounces(a)mirt.net > [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Matteo D'Amato > Sent: Monday, March 06, 2006 7:20 PM > To: stunnel-users(a)mirt.net > Subject: RE: [stunnel-users] Re: Can stunnel do this? > > Stunnel can only be installed on Server A > > > > --Matteo D'Amato > > -----Original Message----- > From: stunnel-users-bounces(a)mirt.net > [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Matteo D'Amato > Sent: Monday, March 06, 2006 5:58 PM > To: stunnel-users(a)mirt.net > Subject: [stunnel-users] Re: Can stunnel do this? > > Hi, > Can stunnel do this > > > Host A ---------> Server A ---------> Server B > SSL unencrypted > > This looks like the opposite of what stunnel does. I have a > host that speaks SSL that needs to talk to a server that does > not and the host must always initiate the connection. Any > ideas if this can be done with stunnel or is there another > way to do this. Thanks

1 0

RE: [stunnel-users] Re: Can stunnel do this?
by Matteo D'Amato 07 Mar '06

07 Mar '06

Stunnel can only be installed on Server A --Matteo D'Amato -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Matteo D'Amato Sent: Monday, March 06, 2006 5:58 PM To: stunnel-users(a)mirt.net Subject: [stunnel-users] Re: Can stunnel do this? Hi, Can stunnel do this Host A ---------> Server A ---------> Server B SSL unencrypted This looks like the opposite of what stunnel does. I have a host that speaks SSL that needs to talk to a server that does not and the host must always initiate the connection. Any ideas if this can be done with stunnel or is there another way to do this. Thanks -- Matteo D'Amato Smartbox Equipment Inc _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

Re: Can stunnel do this?
by Matteo D'Amato 06 Mar '06

06 Mar '06

Hi, Can stunnel do this Host A ---------> Server A ---------> Server B SSL unencrypted This looks like the opposite of what stunnel does. I have a host that speaks SSL that needs to talk to a server that does not and the host must always initiate the connection. Any ideas if this can be done with stunnel or is there another way to do this. Thanks -- Matteo D'Amato Smartbox Equipment Inc

1 0

configure problem in 4.14
by MeeAGhost 06 Mar '06

06 Mar '06

Whether --enable-dh is defined or not the stunnel created certificates created during make-install will include DH support. This is because the USE_DH variable in tools/Makefile is undefined which in turn causes the test portion of the install-data-local section of the tools/Makefile below to fail test $(USE_DH) -eq 0 || $(openssl) gendh $$RND 512 >> stunnel.pem; \ $(openssl) x509 -subject -dates -fingerprint -noout -in stunnel.pem; \ ${INSTALL} -m 600 stunnel.pem $(DESTDIR)$(confdir)/stunnel.pem; \ rm stunnel.pem; \ The test fails with this error message "/bin/bash: test: -eq: unary operator expected" since USE_DH is empty (undefined). I looked at the dh section of the configure script and it appears USE_DH is being set to 1 when --enable-dh is defined. However, USE_DH=1 is only in the DEFS section of tools/Makefile and not actually setting the value of USE_DH variable. I read in the change notes (from several years ago) that dh was disabled by default. I have been running stunnel for the past 3-4 years but have since I initially installed it back then I have been upgrading and therefore the above section of the tools\Makefile was skipped since I already had certificates defined. I went to install on a new box today and found the above 'problem'. So I am not sure how long this has been like this. Before I tried to figure out what is "wrong" I wanted to see if others have noticed this. I have seen this on Solaris 9 and in the cygwin 1.5.19.

2 1

tappipe 1.02 (stable!) released
by Michal Trojnara 03 Mar '06

03 Mar '06

Dear Users, The stable version of my VPN for stunnel/Linux is ready for download here: ftp://ftp.mirt.net/tappipe/ AFAIK it's the shortest (only 356 lines in C language) and probably one of the easiest to setup VPNs ever. Here is the ChangeLog entry: * version 1.02 2006.03.03, status: functional, stable - retransmission rate limiting algoritm improved - some minor bugfixes Could someone contribute a manual page? 8-) Best regards, Mike

1 0

Zombie problem with stunnel-4.11
by Ole Husgaard 01 Mar '06

01 Mar '06

Hi, I am trying to set up stunnel to be invoked from xinetd.d to secure pop3 access, and I'm having problems with zombie processes. It looks like stunnel does not clean up after the pop3 session: 31679 ? Ss 0:00 xinetd -stayalive -reuse -pidfile /var/run/xinetd.pid 32049 ? Ss 0:00 \_ stunnel /etc/pop3s/stunnel.cnf 32050 ? Z 0:00 \_ [ipop3d] <defunct> The contents of my stunnel.cnf file is: CAfile = /var/www/html/ca-cert.crt CRLfile = /var/www/html/ca-crl.crl cert = /etc/pop3s/pop3s.cert key = /etc/pop3s/pop3s.key verify = 2 exec = /usr/sbin/ipop3d execargs = ipop3d I use a non-standard port 997 for the service, so I have the line pop3s-eXerp 997/tcp in my /etc/services file. The xinetd configuration file for the service is: service pop3s-eXerp { disable = no socket_type = stream wait = no user = root server = /usr/sbin/stunnel server_args = /etc/pop3s/stunnel.cnf log_on_success += USERID log_on_failure += USERID } I have searched the net, but have not seen anybody else who have had this problem. Does anybody have an idea of what is causing this problem, or what I can do to work around it? Best Regards, Ole Husgaard.

2 1

Client setup
by Ting 21 Feb '06

21 Feb '06

Hello all, Wonder if anybody could advise. I have a client tn3270 application running on Solaris 2.8. Currently, it is using clear text to communicate with tn3270 server. Now, I need to run tn3270 with SSL. If I install stunnel in the Solaris 2.8 box to act as a wrapper. 1. Do I run the stunnel as a client only ? Is the command: stunnel -c -d <port1> -r <tn3270server>:<port2> a. Is port1 the original port where client tn3270 application sends to server ? b. Is port2 the same as port1 ? c. Alternatively, am I supposed to change the client tn3270 application to direct the data to a new port X, then port1 = X, while port2 is the port where the server is listening on. Thank you in advance. Warm Regards, TW --------------------------------- Do you Yahoo!? Yahoo! Movies - Search movie info and celeb profiles and photos.

2 1

Choosing local 'source' IP?
by Don Werve 20 Feb '06

20 Feb '06

Ok, so here's the problem: I've got stunnel handling SSL for a web-based service that is otherwise too stupid to be able to talk https. Unfortunately, I need to set up a redirection rule inside this service that bounces people back to the https:// page if they try to come in over http. Since said service isn't managing its own SSL, I have no solid way of determining which connections are wrappered by stunnel and which connections come in over the wire, and if I bounce stunnel connections, I end up in an infinite loop. Fortunately, all stunnel connections give a REMOTE_IP of the second ethernet adapter of the host system, which is good. My question is, how do I configure stunnel to 'force' this behavior? E.g., I want to explicitly specify in stunnel.conf 'Connect to the service for which you are acting as a wrapper from *this* IP/interface'. I've tried the 'local = ' option and setting socket flags for 'l' and 'r', and while they don't break anything, I can't use them to force a connection from any other adapter, so I don't think they are doing what I need. This wouldn't be an issue, either, except I don't know how stunnel determines this, and I don't want to (at some point in the future) have things 'magically change' (read: break horribly). Thanks-in-advance! -- Don Werve <donw(a)iradeon.net> Chief Systems Administrator / Systems Architect

2 1

RE: question about stunnel setup
by Anthony Cicalla 15 Feb '06

15 Feb '06

Encrypting traffic to a remote syslog-ng server including SSL peer authentication 1. Install stunnel and syslog-ng on all machines. 2. Create certificates for all machines. On RedHat 9 and similar machines, you can do the following as root: # cd /etc/pki/tls/certs # make syslog-ng-server.pem # make syslog-ng-client.pem 3. Place copies of syslog-ng-server.pem on all machines in /etc/stunnel with one important alteration. The clients only need the certificate section of syslog-ng-server.pem. In other words, remove the private key section from syslog-ng-server.pem on all clients. Place every client's syslog-ng-client.pem in /etc/stunnel. For server, create a special syslog-ng-client.pem containing the certificate sections for all clients and place in /etc/stunnel. In other words, remove the private key sections from all syslog-ng-client.pem files and concatenate what is left to create server's special syslog-ng-client.pem. Ok my question is from above it says to create one syslog-ng-client.pem file per client. 1)Do the names for each of these need to remain syslog-ng-client.pem or can they have names that reflect the host that they are on? 2) if they all need to keep that name do just move the client file to one client/host and then delete it from the server then move on to create the next?

2 1

stunnel and syslog
by Bart Somers 10 Feb '06

10 Feb '06

Hi to all, We recently ran in to a problem using stunnel on our AIX 5.2 machines. This is our situation: we are running stunnel as a client to protect http (and a proprietary protocol) traffic between our company and a customer. We are using client-athentication to grant access to the server and on our client-side we validate the server-certificates. This all works fine. Due to new security-restrictions, we are moving all our private-key material into HSM-boxes, in our case these are nCipher nShield HSM's. According to the documantion on there website ( http://active.ncipher.com ) we builded openssl nCipher-enabled. Based on this openssl-version, we builded stunnel. All the build-options are shown below in this message. The compiler used is the IBM C compiler. According to the manuals from stunnel we needed to put in an extra line to the config-file which shows "engine = chil" (chil is the Cryptographic Hardware Interface Library, the way the nCipher HSM's are known to openssl) After all this, we created key's in the hsm, using the nCipher tools and loaded them into stunnel (using this method you get a "pseudo-pem-file", which is actually a reference to the hardware-key). Fire-up stunnel using the commands from nCipher to preload the key's and we are all good to go! When this all seems to work very stable after a few months, with thousands of connections and ditto megabytes transfered, we wanted to have all the logging to our syslogserver (it runs syslog-ng) and this is the place where my problem hits in: When commenting-out the option "output = /home/bart/stl/var/stunnel.log" and restarting stunnel, stunnel dies after the first or second connection, leaving no logging, corefiles or whatever behind. Using plain key's (so no HSM, but with the same build which is aware of the HSM), syslog is no problem. Using HSM-key's with plaintext logfiles (no syslog) works also excellent. As i don't have any ideas anymore where to search, i want to ask you if somebody ever have seen this behaviour or knows where it could be caused by. (And maybe how to solve it....) Thanks in advance! Best regards, Bart Somers. ############################# # Build- and config-options # ############################# bart@server1:./stunnel -version stunnel 4.11 on powerpc-ibm-aix5.2.0.0 UCONTEXT+POLL+IPv4 with OpenSSL 0.9.8 05 Jul 2005 Global options cert = home/bart/stl/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 key = /home/bart/stl/etc/stunnel/stunnel.pem pid = /home/bart/stl/var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes session = 300 seconds verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds bart@server1:./openssl version OpenSSL 0.9.8 05 Jul 2005 compile-options: Openssl: $ export LDFLAGS="-L/opt/nfast/toolkits/hwcrhk" $ ./config --prefix=/home/bart/stl –DNFast –ldl make and make install Stunnel: $ export CPPFLAGS="-I/home/bart/stl/include" $ export LDFLAGS="-L/opt/nfast/toolkits/hwcrhk" $ ./configure –-prefix=/home/bart/stl –-with-ssl=/home/bart/stl -–disable-libwrap make and make install Config-file: Include engine = chil Start-up: $ with-nfast –f /home/bart/stl/tmp/ff /home/bart/stl/sbin/stunnel /home/bart/stl/etc/stunnel/stunnel.conf Relevant information from the config-file: engine = chil cert = /home/bart/stl/etc/stunnel/my-key.pem key = /home/bart/stl/etc/stunnel/my-key-hsm.pem ;(no chroot options used) pid = /prj/stl_004/tmp/test/stunnel-client.pid debug = 7 ; output = /home/bart/stl/var/stunnel.log # when in comment, problems! client = yes [test] accept = 9400 connect = 10.10.10.10:443 All other values are the default from the example.

2 4

transparent mode in linux
by Jesse Small 10 Feb '06

10 Feb '06

Hello, I am having trouble with the 'transparent = yes' option in my configuration file. Basically the goal is to see the IP address of the client connecting to our server, but I am getting this error in the log file: bind transparent: Cannot assign requested address (99) Failed to initialize remote connection After searching through the stunnel archives, I saw that this option (-T back then) was supported only up to the Linux 2.2 kernel, but didn't work on the 2.4 kernel. All the messages I read through were a few years old. I am using Fedora Core 4 with a 2.6 kernel, and wanted to see if there were any updates and if it was now possible to see the client's IP address. Otherwise all incoming connections appear as if from localhost. We are using stunnel v4.14. Thanks for your help, Jesse

2 1

stunnel closing connections with RST ?
by sergei 09 Feb '06

09 Feb '06

I'm setting up load-balanced service requiring stunnel with SSL on its front end. There are two hosts behind load balancer running stunnel . Service behind stunnel does not speak SSL. Every few minutes load balancer checks if those stunnels are still alive by opening tcp connection to stunnel listening port. Now problem is that stunnel closes those test connections with RST and load balancer takes it as that host is dead. This is without "client = yes" option because service does not speak SSL load-balancer -> stunnel-host TCP D=1234 S=33007 Syn stunnel-host -> load-balancer TCP D=33007 S=1234 Syn Ack load-balancer -> stunnel-host TCP D=1234 S=33007 Ack load-balancer -> stunnel-host TCP D=1234 S=33007 Fin Ack stunnel-host -> load-balancer TCP D=33007 S=1234 Ack stunnel-host -> load-balancer TCP D=33007 S=1234 Rst On the other hand with client=yes everything works fine load-balancer -> stunnel-host TCP D=123 S=33010 Syn stunnel-host -> load-balancer TCP D=33010 S=123 Syn Ack load-balancer -> stunnel-host TCP D=123 S=33010 Ack load-balancer -> stunnel-host TCP D=123 S=33010 Fin Ack stunnel-host -> load-balancer TCP D=33010 S=123 Fin Ack load-balancer -> stunnel-host TCP D=123 S=33010 Ack Is there any way to make stunnel without "client = yes" close connection "normal way" with FIN instead of RST ? stunnel is last version, load balancer is some older F5 BigIP thanks sergei

3 7

certificate root chain
by Olivier twist 09 Feb '06

09 Feb '06

Hello, I've already sent a message for my problem but no answer. I have a server certificate signed by GlobalSign. I don't want to use client certificate. But if I don't put the certification chain on the CAFILE of stunnel and don't set verify at 1, stunnel doesn't check the server certification chain and the server certificate appears broken on client side !!! I've post this problem on the stunnel mailing list but you tell me that if I don't use client certificate I don't have to set verify at 1. But it doesn't work, and why GlobalSign and others explain how to install server certificatation chain on servers like apache mod ssl?(see http://support.globalsign.net/en/serversign/apachemodssl.cfm) when I read this help file I suppose that the ssl protocol on server side makes a check of server certificate, and that's the reason why the certificate chain appears broken or not on client side. My current ugly solution is to set verify at 1, in this case, on client side, the certificate appears good and not broken but... a dialog box appears and ask for client certificate and some plugin like flash doesn't support that. i use stunnel 4.14 stunnel.conf: cert = c:\certif\inTest.crt key = c:\certif\inTest.key socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify = 1 CAfile = c:\certif\ca.pem ;client = yes [https] accept = 443 connect = 127.0.0.1:901 TIMEOUTclose = 0 [rtmps] accept = 80 connect = 127.0.0.1:900 TIMEOUTclose = 0 Could anybody gives me a support? Thx Oliver

3 3

Re: [stunnel-users] certificate root chain
by Hans Werner Strube 09 Feb '06

09 Feb '06

Olivier twist wrote: > I have a server certificate signed by GlobalSign. I don't want to use client > certificate. > But if I don't put the certification chain on the CAFILE of stunnel and > don't set verify at 1, stunnel doesn't check the server certification chain > and the server certificate appears broken on client side !!! ... > cert = c:\certif\inTest.crt > key = c:\certif\inTest.key ... > CAfile = c:\certif\ca.pem AFAIK the whole certificate chain from your server certificate up to the CA certificate should be in inTest.crt (simply concatenate the PEM files). The CAfile would be needed for client verification only.

1 0

RE: [stunnel-users] stunnel help
by Anthony Cicalla 07 Feb '06

07 Feb '06

I sent an email last week for help with a stunnel setup. I am attempting to send syslog messages via a snare agent through stunnel to a fedora core 4 box with syslog-ng installed. I have been able to get one machine to successfully log to the fedora box out of 4. I set these boxes up the same way and I am confused as to why one is working and the others aren't . This is my stunnel.conf file for the clients cert = C:\bin\stunnel\syslog-ng-server.pem CAfile = c:\bin\stunnel\syslog-ng-client.pem verify = 3 [5140] accept = 127.0.0.1:514 connect = 192.168.185.60:5140 This is my stunnel.conf file for the server cert = /etc/stunnel/syslog-ng-server.pem CAfile = /etc/stunnel/syslog-ng-client.pem verify = 3 [5140] accept = 192.168.185.60:5140 connect = 127.0.0.1:514 This is my syslog-ng.conf file on the server options { sync (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (no); create_dirs (no); keep_hostname (yes); }; source s_sys { file ("/proc/kmsg" log_prefix("kernel: ")); unix-stream ("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); tcp(ip(0.0.0.0) port(514)); }; destination d_cons { file("/dev/console"); }; destination d_mesg { file("/var/log/messages"); }; destination d_auth { file("/var/log/secure"); }; The snare agents are configured to send logs to 127.0.0.1 514. Any thoughts or idea's would be great. sincerely, Anthony -----Original Message----- From: Michal Trojnara [mailto:Michal.Trojnara@mobi-com.net] Sent: Tuesday, February 07, 2006 1:03 AM To: stunnel-users(a)mirt.net Subject: RE: [stunnel-users] stunnel closing connections with RST ? sergei wrote: > Is there any way to make stunnel without "client = yes" > close connection "normal way" with FIN instead of RST ? Stunnel resets connections for a reason. Probably it was reset by the other peer. Check your stunnel log files for details. Best regards, Mike _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

Multiple Instances of Same Application, Different Ports
by Steve Ricketts 06 Feb '06

06 Feb '06

1 0

stunnel not connecting to port 139 on server
by Neil Aggarwal 05 Feb '06

05 Feb '06

Hello: I have two windows machines. I am trying to connect to a shared drive on the server over an stunnel connection following the instructions on this page: http://research.lumeta.com/ches/cheap/stunnelsolution.html The connection from the client seems to connect to the server, but the server-side stunnel seems to be getting a timeout when it attempts to connect to port 139. I am able to map the network drive locally, so I am surprised it is not able to connect. Here is the log from stunnel on the server: 2006.02.04 18:22:17 LOG5[2116:3068]: stunnel 4.14 on x86-pc-mingw32-gnu WIN32+SELECT+IPv6 with OpenSSL 0.9.7i 14 Oct 2005 2006.02.04 18:22:17 LOG7[2116:3968]: RAND_status claims sufficient entropy for the PRNG 2006.02.04 18:22:17 LOG6[2116:3968]: PRNG seeded successfully 2006.02.04 18:22:17 LOG7[2116:3968]: Certificate: stunnel.pem 2006.02.04 18:22:17 LOG7[2116:3968]: Key file: stunnel.pem 2006.02.04 18:22:17 LOG5[2116:3968]: No limit detected for the number of clients 2006.02.04 18:22:17 LOG7[2116:3968]: FD 168 in non-blocking mode 2006.02.04 18:22:17 LOG7[2116:3968]: SO_REUSEADDR option set on accept socket 2006.02.04 18:22:17 LOG7[2116:3968]: netDrives bound to 0.0.0.0:2139 2006.02.04 18:24:49 LOG7[2116:3968]: netDrives accepted FD=188 from 192.168.1.247:1334 2006.02.04 18:24:49 LOG7[2116:3968]: Creating a new thread 2006.02.04 18:24:49 LOG7[2116:3968]: New thread created 2006.02.04 18:24:49 LOG7[2116:2224]: netDrives started 2006.02.04 18:24:49 LOG7[2116:2224]: FD 188 in non-blocking mode 2006.02.04 18:24:49 LOG7[2116:2224]: TCP_NODELAY option set on local socket 2006.02.04 18:24:49 LOG5[2116:2224]: netDrives connected from 192.168.1.247:1334 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): before/accept initialization 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 read client hello A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 write server hello A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 write certificate A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 write server done A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 flush data 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 read client key exchange A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 read finished A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 write change cipher spec A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 write finished A 2006.02.04 18:24:49 LOG7[2116:2224]: SSL state (accept): SSLv3 flush data 2006.02.04 18:24:49 LOG7[2116:2224]: 1 items in the session cache 2006.02.04 18:24:49 LOG7[2116:2224]: 0 client connects (SSL_connect()) 2006.02.04 18:24:49 LOG7[2116:2224]: 0 client connects that finished 2006.02.04 18:24:49 LOG7[2116:2224]: 0 client renegotiatations requested 2006.02.04 18:24:49 LOG7[2116:2224]: 1 server connects (SSL_accept()) 2006.02.04 18:24:49 LOG7[2116:2224]: 1 server connects that finished 2006.02.04 18:24:49 LOG7[2116:2224]: 0 server renegotiatiations requested 2006.02.04 18:24:49 LOG7[2116:2224]: 0 session cache hits 2006.02.04 18:24:49 LOG7[2116:2224]: 0 session cache misses 2006.02.04 18:24:49 LOG7[2116:2224]: 0 session cache timeouts 2006.02.04 18:24:49 LOG6[2116:2224]: SSL accepted: new session negotiated 2006.02.04 18:24:49 LOG6[2116:2224]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2006.02.04 18:24:49 LOG7[2116:2224]: FD 216 in non-blocking mode 2006.02.04 18:24:49 LOG7[2116:2224]: netDrives connecting 127.0.0.1:139 2006.02.04 18:24:49 LOG7[2116:2224]: connect_wait: waiting 10 seconds 2006.02.04 18:24:59 LOG7[2116:3968]: netDrives accepted FD=236 from 192.168.1.247:1336 2006.02.04 18:24:59 LOG7[2116:3968]: Creating a new thread 2006.02.04 18:24:59 LOG7[2116:3968]: New thread created 2006.02.04 18:24:59 LOG7[2116:3544]: netDrives started 2006.02.04 18:24:59 LOG7[2116:3544]: FD 236 in non-blocking mode 2006.02.04 18:24:59 LOG7[2116:3544]: TCP_NODELAY option set on local socket 2006.02.04 18:24:59 LOG5[2116:3544]: netDrives connected from 192.168.1.247:1336 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): before/accept initialization 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): SSLv3 read client hello A 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): SSLv3 write server hello A 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): SSLv3 write change cipher spec A 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): SSLv3 write finished A 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): SSLv3 flush data 2006.02.04 18:24:59 LOG7[2116:3544]: SSL state (accept): SSLv3 read finished A 2006.02.04 18:24:59 LOG7[2116:3544]: 1 items in the session cache 2006.02.04 18:24:59 LOG7[2116:3544]: 0 client connects (SSL_connect()) 2006.02.04 18:24:59 LOG7[2116:3544]: 0 client connects that finished 2006.02.04 18:24:59 LOG7[2116:3544]: 0 client renegotiatations requested 2006.02.04 18:24:59 LOG7[2116:3544]: 2 server connects (SSL_accept()) 2006.02.04 18:24:59 LOG7[2116:3544]: 2 server connects that finished 2006.02.04 18:24:59 LOG7[2116:3544]: 0 server renegotiatiations requested 2006.02.04 18:24:59 LOG7[2116:3544]: 1 session cache hits 2006.02.04 18:24:59 LOG7[2116:3544]: 0 session cache misses 2006.02.04 18:24:59 LOG7[2116:3544]: 0 session cache timeouts 2006.02.04 18:24:59 LOG6[2116:2224]: connect_wait: s_poll_wait timeout 2006.02.04 18:24:59 LOG6[2116:3544]: SSL accepted: previous session reused 2006.02.04 18:24:59 LOG3[2116:2224]: Failed to initialize remote connection 2006.02.04 18:24:59 LOG7[2116:3544]: FD 216 in non-blocking mode 2006.02.04 18:24:59 LOG7[2116:2224]: netDrives finished (1 left) 2006.02.04 18:24:59 LOG7[2116:3544]: netDrives connecting 127.0.0.1:139 2006.02.04 18:24:59 LOG7[2116:3544]: connect_wait: waiting 10 seconds 2006.02.04 18:25:09 LOG6[2116:3544]: connect_wait: s_poll_wait timeout 2006.02.04 18:25:09 LOG3[2116:3544]: Failed to initialize remote connection 2006.02.04 18:25:09 LOG7[2116:3544]: netDrives finished (0 left) Here is the stunnel.conf file from the server: ; Sample stunnel configuration file by Michal Trojnara 2002-2005 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode ;client = yes ; Service-level configuration [netDrives] accept = 2139 connect = 139 In case you need it, here is the stunnel log from the client: 2006.02.04 18:23:43 LOG5[3236:2376]: stunnel 4.14 on x86-pc-mingw32-gnu WIN32+SELECT+IPv6 with OpenSSL 0.9.7i 14 Oct 2005 2006.02.04 18:23:43 LOG7[3236:324]: RAND_status claims sufficient entropy for the PRNG 2006.02.04 18:23:43 LOG6[3236:324]: PRNG seeded successfully 2006.02.04 18:23:43 LOG7[3236:324]: Certificate: stunnel.pem 2006.02.04 18:23:43 LOG7[3236:324]: Key file: stunnel.pem 2006.02.04 18:23:43 LOG5[3236:324]: No limit detected for the number of clients 2006.02.04 18:23:43 LOG7[3236:324]: FD 200 in non-blocking mode 2006.02.04 18:23:43 LOG7[3236:324]: SO_REUSEADDR option set on accept socket 2006.02.04 18:23:43 LOG7[3236:324]: netDrives bound to 222.222.222.222:139 2006.02.04 18:24:42 LOG7[3236:324]: netDrives accepted FD=220 from 192.168.1.247:1333 2006.02.04 18:24:42 LOG7[3236:324]: Creating a new thread 2006.02.04 18:24:42 LOG7[3236:324]: New thread created 2006.02.04 18:24:42 LOG7[3236:572]: netDrives started 2006.02.04 18:24:42 LOG7[3236:572]: FD 220 in non-blocking mode 2006.02.04 18:24:42 LOG7[3236:572]: TCP_NODELAY option set on local socket 2006.02.04 18:24:42 LOG5[3236:572]: netDrives connected from 192.168.1.247:1333 2006.02.04 18:24:42 LOG7[3236:572]: FD 252 in non-blocking mode 2006.02.04 18:24:42 LOG7[3236:572]: netDrives connecting 192.168.1.10:2139 2006.02.04 18:24:42 LOG7[3236:572]: connect_wait: waiting 10 seconds 2006.02.04 18:24:42 LOG7[3236:572]: connect_wait: connected 2006.02.04 18:24:42 LOG7[3236:572]: Remote FD=252 initialized 2006.02.04 18:24:42 LOG7[3236:572]: TCP_NODELAY option set on remote socket 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): before/connect initialization 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 write client hello A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 read server hello A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 read server certificate A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 read server done A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 write client key exchange A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 write change cipher spec A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 write finished A 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 flush data 2006.02.04 18:24:42 LOG7[3236:572]: SSL state (connect): SSLv3 read finished A 2006.02.04 18:24:42 LOG7[3236:572]: 1 items in the session cache 2006.02.04 18:24:42 LOG7[3236:572]: 1 client connects (SSL_connect()) 2006.02.04 18:24:42 LOG7[3236:572]: 1 client connects that finished 2006.02.04 18:24:42 LOG7[3236:572]: 0 client renegotiatations requested 2006.02.04 18:24:42 LOG7[3236:572]: 0 server connects (SSL_accept()) 2006.02.04 18:24:42 LOG7[3236:572]: 0 server connects that finished 2006.02.04 18:24:42 LOG7[3236:572]: 0 server renegotiatiations requested 2006.02.04 18:24:42 LOG7[3236:572]: 0 session cache hits 2006.02.04 18:24:42 LOG7[3236:572]: 0 session cache misses 2006.02.04 18:24:42 LOG7[3236:572]: 0 session cache timeouts 2006.02.04 18:24:42 LOG6[3236:572]: SSL connected: new session negotiated 2006.02.04 18:24:42 LOG6[3236:572]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 2006.02.04 18:24:52 LOG3[3236:572]: readsocket: Connection reset by peer (WSAECONNRESET) (10054) 2006.02.04 18:24:52 LOG7[3236:324]: netDrives accepted FD=276 from 192.168.1.247:1335 2006.02.04 18:24:52 LOG5[3236:572]: Connection reset: 72 bytes sent to SSL, 0 bytes sent to socket 2006.02.04 18:24:52 LOG7[3236:324]: Creating a new thread 2006.02.04 18:24:52 LOG7[3236:572]: netDrives finished (0 left) 2006.02.04 18:24:52 LOG7[3236:324]: New thread created 2006.02.04 18:24:52 LOG7[3236:1336]: netDrives started 2006.02.04 18:24:52 LOG7[3236:1336]: FD 276 in non-blocking mode 2006.02.04 18:24:52 LOG7[3236:1336]: TCP_NODELAY option set on local socket 2006.02.04 18:24:52 LOG5[3236:1336]: netDrives connected from 192.168.1.247:1335 2006.02.04 18:24:52 LOG7[3236:1336]: FD 248 in non-blocking mode 2006.02.04 18:24:52 LOG7[3236:1336]: netDrives connecting 192.168.1.10:2139 2006.02.04 18:24:52 LOG7[3236:1336]: connect_wait: waiting 10 seconds 2006.02.04 18:24:52 LOG7[3236:1336]: connect_wait: connected 2006.02.04 18:24:52 LOG7[3236:1336]: Remote FD=248 initialized 2006.02.04 18:24:52 LOG7[3236:1336]: TCP_NODELAY option set on remote socket 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): before/connect initialization 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): SSLv3 write client hello A 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): SSLv3 read server hello A 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): SSLv3 read finished A 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): SSLv3 write change cipher spec A 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): SSLv3 write finished A 2006.02.04 18:24:52 LOG7[3236:1336]: SSL state (connect): SSLv3 flush data 2006.02.04 18:24:52 LOG7[3236:1336]: 1 items in the session cache 2006.02.04 18:24:52 LOG7[3236:1336]: 2 client connects (SSL_connect()) 2006.02.04 18:24:52 LOG7[3236:1336]: 2 client connects that finished 2006.02.04 18:24:52 LOG7[3236:1336]: 0 client renegotiatations requested 2006.02.04 18:24:52 LOG7[3236:1336]: 0 server connects (SSL_accept()) 2006.02.04 18:24:52 LOG7[3236:1336]: 0 server connects that finished 2006.02.04 18:24:52 LOG7[3236:1336]: 0 server renegotiatiations requested 2006.02.04 18:24:52 LOG7[3236:1336]: 1 session cache hits 2006.02.04 18:24:52 LOG7[3236:1336]: 0 session cache misses 2006.02.04 18:24:52 LOG7[3236:1336]: 0 session cache timeouts 2006.02.04 18:24:52 LOG6[3236:1336]: SSL connected: previous session reused 2006.02.04 18:25:02 LOG3[3236:1336]: readsocket: Connection reset by peer (WSAECONNRESET) (10054) 2006.02.04 18:25:02 LOG5[3236:1336]: Connection reset: 72 bytes sent to SSL, 0 bytes sent to socket 2006.02.04 18:25:02 LOG7[3236:1336]: netDrives finished (0 left) Here is the stunnel.conf file from the client: ; Sample stunnel configuration file by Michal Trojnara 2002-2005 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Workaround for Eudora bug ;options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ;CApath = certs ; It's often easier to use CAfile ;CAfile = certs.pem ; Don't forget to c_rehash CRLpath ;CRLpath = crls ; Alternatively you can use CRLfile ;CRLfile = crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [netDrives] accept = 222.222.222.222:139 connect = tcServer.crcBusinessServices.com:2139 Any ideas what could be wrong? Thanks, Neil -- Neil Aggarwal, JAMM Consulting, (214) 986-3533, www.JAMMConsulting.com FREE! Valuable info on how your business can reduce operating costs by 17% or more in 6 months or less! http://newsletter.JAMMConsulting.com

1 0

tappipe 1.01 released
by Michal Trojnara 04 Feb '06

04 Feb '06

Here is the ChangeLog entry: * version 1.01 2006.02.04, status: functional, not proven to be stable - TUN changed to TAP (project renamed from tunpipe to tappipe) - TCP-over-TCP meltdown problem fixed http://sites.inka.de/sites/bigred/devel/tcp-tcp.html - important bugfixes Download site: ftp://stunnel.mirt.net/tappipe/ Best regards, Mike

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users