stunnel-users

stunnel-users@stunnel.org

5 participants
3293 discussions

possible stunnel memory leak
by Stefano Stabellini 25 Mar '08

25 Mar '08

Hi all, I may have found a possible memory leak in stunnel (version 4.15) when used with pthreads. What I am seeing is the memory usage going up when connections open and never going down, no matter if all the connections close. It is really easy to reproduce it: I have started two stunnel instances communicating with each other, the first one acting as a server (config file stunnel.1) and executing cat, the second one acting as a client (config file stunnel.2) and opening port 5556. Then I execute the script I have attached that simply opens 500 connections using netcat to port 5556. If you cat /proc/<stunnel pid>/status you can see that the memory usage is about 300MB. The problem is that even after all the connections are closed the memory usage stays (more or less) the same. I tried to find the bug myself using valgrind, but I couldn't get far, it seems that valgrind gets confused by openssl so doesn't print very useful informations. I really appreciate any help you can give me; just tell me if you need any other info. Best Regards, Stefano Stabellini #!/bin/bash i=1 while test $i -lt 520 do cat script | nc 127.0.0.1 5556 &>/dev/null & echo $i i=$(( $i + 1 )) done foreground = yes [test] accept = 5555 cert = /etc/ssl/certs/stunnel.pem exec = cat foreground = yes [test] accept = 5556 cert = /etc/ssl/certs/stunnel.pem client = yes connect = 5555

1 0

IMAPS stunnel on older OSX Mac: SSL3_GET_RECORD:wrong version number
by Tom Shaw 23 Mar '08

23 Mar '08

1. compiled and installed stunnel on older OSX Mac. Tried connectiong via IMAPS and POP3S using Apple OSX Mail and I get the errors shown in line 4. Process works when I change my .conf file to contain sslVersion = SSLv2. I'm a neophyte to ssl and I have no idea what is wrong or where to start or if this situation is OK. Any help is appreciated. Also this needs to be backward compatible to OSX 10.3.9 which is why the compiling on Panther. 2. stunnel version 4.20 3. standalone via sudo from command line 4. error message Mar 23 10:49:52 musky stunnel: LOG5[2941:25192960]: imaps accepted connection from 206.208.58.127:37295 Mar 23 10:49:52 musky stunnel: LOG3[2941:25192960]: SSL_accept: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number Mar 23 10:49:52 musky stunnel: LOG5[2941:25192960]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 5. $ /usr/local/sbin/stunnel -version stunnel 4.20 on powerpc-apple-darwin7.9.0 with OpenSSL 0.9.7l 28 Sep 2006 Threading:PTHREAD SSL:ENGINE Sockets:SELECT,IPv4 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none 6. $ uname -a Darwin musky.oitc.com 7.9.0 Darwin Kernel Version 7.9.0: Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC Power Macintosh powerpc 7. Your libc version if you use Linux. 8. $ gcc -v Reading specs from /usr/libexec/gcc/darwin/ppc/3.3/specs Thread model: posix gcc version 3.3 20030304 (Apple Computer, Inc. build 1666) 9. $ openssl version OpenSSL 0.9.7l 28 Sep 2006 10. My conf ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Please make sure you understand them (especially the effect of chroot jail) ; Certificate/key is needed in server mode and optional in client mode cert = /usr/local/etc/stunnel/secure_mail.pem ;key = /usr/local/etc/stunnel/secure_mail.pem ; Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = SSLv2 ; Some security enhancements for UNIX systems - comment them out on Win32 ;chroot = /usr/local/var/lib/stunnel/ ;setuid = nobody ;setgid = nobody ;setgid = nogroup ; PID is created inside chroot jail pid = /var/run/stunnel.pid ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ;compression = rle ; Workaround for Eudora bug options = DONT_INSERT_EMPTY_FRAGMENTS ; Authentication stuff ;verify = 2 ; Don't forget to c_rehash CApath ; CApath is located inside chroot jail ;CApath = /certs ; It's often easier to use CAfile ;CAfile = /usr/local/etc/stunnel/certs.pem ; Don't forget to c_rehash CRLpath ; CRLpath is located inside chroot jail ;CRLpath = /crls ; Alternatively you can use CRLfile ;CRLfile = /usr/local/etc/stunnel/crls.pem ; Some debugging stuff useful for troubleshooting debug = 7 ;output = stunnel.log ; Use it for client mode ;client = yes ; Service-level configuration [pop3s] accept = 995 connect = 110 [imaps] accept = 993 connect = 143 [ssmtp] accept = 465 connect = 587 [sldap] accept = 636 connect = 389 ;[https] ;accept = 443 ;connect = 80 ;TIMEOUTclose = 0 ; vim:ft=dosini

1 0

What is the stable version of Stunnel?
by Randy McMurchy 22 Mar '08

22 Mar '08

Hi all, Can anyone say for sure what is the stable version of Stunnel? On the main Stunnel web site page ( http://www.stunnel.org ) and in the announcement for the version it says the new 4.21 version is experimental. However, on the download page ( http://www.stunnel.org/download/source.html ) the 4.21 version is flagged as the stable version. Sort of confusing. -- Randy

2 1

compiling stunnel 4.21 on solaris 10
by cod3fr3ak 14 Mar '08

14 Mar '08

Is this not compatible with Openssl 0.9.8f? I think 0.9.8g only reacently came out. Is this the only thing wrong. All my other applications work with this version of openssl. BTW I am using the sunfreeware version, because I wanted to avoid having to compile a bunch of software. i was planning to only compile Stunnel, and maybe swatch. I'll compile Openssl if there is no other way but I'd rather not. Any ideas? R

1 0

bidirectional tunnel
by Leo Cherepanov 14 Mar '08

14 Mar '08

Hello. First of all - thanx a lot, I'm using stunnel every day and it helps me. It will help me even more :) if I can make bidirectional tunnel between external server S and computer C behind nat-proxy-firewall. Of course, C is initiator. I mean after tunnel is up, there is a port-forward C:port1->S:port2 (already works) _and_ S:port3->C:port4 Once again, S has an external ip, C has a private ip. Is this schema posible? Thanx en avance.

1 0

SSLV3 decompression failure???
by Earl Stenlund 13 Mar '08

13 Mar '08

I've been running into the error below: SSL_connect: 14094406: error:14094406:SSL routines:SSL3_READ_BYTES:sslv3 alert decompression failure Running Vista SP1 with stunnel 4.21 connecting to newshosting. It seems to come and go. Any ideas on what is causing this or how to fix it? Thanks, Earl

1 0

Re: [stunnel-users] Compiling Stunnel 4.21 on Solaris 10
by cod3fr3ak 13 Mar '08

13 Mar '08

1 0

Compiling Stunnel 4.21 on Solaris 10
by cod3fr3ak 13 Mar '08

13 Mar '08

I am trying to compile Stunnel 4.21 on Solaris 10 with no luck. I am using Openssl 0.9.8f. After running configure, I run make and receive the following output: (truncated for size) ------------------------------------------------------- /bin/bash ../libtool --tag=CC --mode=link gcc -m64 -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/usr/local/ssl/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o -lz -ldl -lsocket -lnsl -lpthread -L/usr/local/ssl/lib -lssl -lcrypto gcc -m64 -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/usr/local/ssl/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o -lz -ldl -lsocket -lnsl -lpthread -L/usr/local/ssl/lib -lssl -lcrypto Undefined first referenced symbol in file BIO_set_flags protocol.o SSL_CTX_set_info_callback ctx.o ld: fatal: Symbol referencing errors. No output written to stunnel collect2: ld returned 1 exit status *** Error code 1 make: Fatal error: Command failed for target `stunnel' Current working directory /tmp/stunnel-4.20/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc tools'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' I have tried Stunnel version 4.21, 4.20 with the same results. I have used Stunnel to help build several secure log servers in the past, and I've never had problems getting it compiled and installed. Any help would be greatly appreciated. cod3fr3ak

1 0

Re: [stunnel-users] stunnel not seeing ca bundle files
by Ludolf Holzheid 12 Mar '08

12 Mar '08

On Wed, 2008-03-12 09:05:17 -0700, sf.techguy(a)gmail.com wrote: > [..] > > Tried the command above on the 1st of 5 crt files (openssl pkcs12 -in > filename.crt -out filename.pem), and am getting this error: > > 19319:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong > tag:tasn_dec.c:1007: > 19319:error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 > error:tasn_dec.c:305:Type=PKCS12 > > Any ideas why that might be happening? It seems your files do not contain a PKCS#12 structure (containing the key and the whole certificate chain). I should have recognize this by the fact you have one file for each certificate. Sorry. Maybe you should give the x509 openssl command a try: openssl x509 -in filename.crt -inform DES -out filename.pem HTH, Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

stunnel not seeing ca bundle files
by sf.techguy＠gmail.com 12 Mar '08

12 Mar '08

I'm running stunnel 4.14 on Darwin 7.0.0 (Mac OS X Server 10.4.11), with OpenSSL 0.9.71. I purchased a security certificate from comodo, and was able to get it installed and working (mostly) with stunnel, but when I browse to the website, I get an error that the the browser can't verify the identity of the site, due to a problem w/the security cert. I called comodo, and they the error is caused by stunnel not seeing the intermediate certificate files that they told me need to be installed in order for their certificate to work. These files were: ComodoUTNServerCA.crt UTNAddTrustServerCA.crt AddTrustExternalCARoot.crt EssentialSSLCA.crt my_server_net.crt I modified stunnel.conf, and included this line: CApath = ca-certs/ (<- dir path, relative to chroot, containing above files) But the error persists. Can anyone tell me if what comodo support is telling me is even correct? I've verified that my .key and .crt files match by running: $ openssl x509 -noout -modulus -in server.crt | openssl md5 $ openssl rsa -noout -modulus -in server.key | openssl md5 And the output of both matches. Not sure what to try next. Any help much appreciated! Thanks in advance...

3 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users