Denis,
Please review this:
http://stunnel.mirt.net/pipermail/stunnel-users/2011-May/003080.html
In particular, check that you have your signing CA certificates (hashed) in your CaPath.
Do the tests with openssl connect and post sanitized results if you are in trouble.
Regards, Jose
________________________________ From: Denis Berezhnoy denis.berezhnoy@gmail.com To: Jose Alf. josealf@rocketmail.com Cc: "stunnel-users@stunnel.org" stunnel-users@stunnel.org Sent: Wednesday, January 25, 2012 9:55 AM Subject: Re: [stunnel-users] No SSL handshake between stunnel in client mode and SSL server
Hi Jose, Thank you for your reply. I double checked and actually there is SSL handshake. Sorry, it was my mistake I did not analyze WireShark capture carefully. But handshake failed and here is stunnel log: 2012.01.25 09:39:58 LOG5[1944:6264]: stunnel 4.52 on x86-pc-mingw32-gnu platform 2012.01.25 09:39:58 LOG5[1944:6264]: Compiled/running with OpenSSL 0.9.8s-fips 4 Jan 2012 2012.01.25 09:39:58 LOG5[1944:6264]: Threading:WIN32 SSL:ENGINE,FIPS Auth:none Sockets:SELECT,IPv6 2012.01.25 09:39:58 LOG5[1944:6264]: Reading configuration from file stunnel.conf 2012.01.25 09:39:58 LOG5[1944:6264]: FIPS mode is enabled 2012.01.25 09:39:58 LOG5[1944:6264]: Configuration successful 2012.01.25 09:40:13 LOG5[1944:4724]: Service Router accepted connection from 192.168.1.161:59519 2012.01.25 09:40:13 LOG5[1944:4724]: connect_blocking: connected 192.168.160.168:55443 2012.01.25 09:40:13 LOG5[1944:4724]: Service Router connected remote server from 192.168.1.121:52250 2012.01.25 09:40:13 LOG3[1944:4724]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2012.01.25 09:40:13 LOG5[1944:4724]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket
Server is setup for SSL3.0. Best regards, Denis
2012/1/24 Jose Alf. josealf@rocketmail.com
Denis,
Looks like your configuration is incomplete. Check the sample stunnel.conf file in the stunnel distribution. Read the man page. Post your log file.
Try adding lines like these before [Router]
sslVersion = SSLv3
cert=stunnel.pem key=stunnel.pem
# Authentication stuff, try 0 for test verify = 0
CApath = /your/CAcerts/path
debug = 7 output = stunnel.log
From: Denis Berezhnoy denis.berezhnoy@gmail.com To: stunnel-users@stunnel.org Sent: Tuesday, January 24, 2012 6:10 PM Subject: [stunnel-users] No SSL handshake between stunnel in client mode and SSL server
Hi guys, I have a quick question. I am trying to use stunnel in client mode to encrypt traffic going to my server. Basically, I have a server which listens for SSL connection. And I have a client which can not do SSL but it needs to communicate with server over SSL. I setup stunnel in client mode to accept unecrypted traffic from client and redirect it to server over SSL. I checked TCP traffic with WireShark between stunnel and my server and I can see that there is no SSL handshake, stunnel makes TCP connection with server and sends some TCP packets but I expect to see SSL handshake. My stunnel conf file is here: [Router] client=yes accept = 192.168.1.121:55555 connect = 192.168.160.168:55443 Can you please comment on this? Best regards, Denis _______________________________________________ stunnel-users mailing list stunnel-users@stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users