Ok, so the problem is similar on Linux also? In my case 5.44 works well
without crashes, only 5.45 and 5.46 is broken on Windows. Yes it appears to be the same on linux. I didnt try 5.44 I just went back to the last version (5.41) I had available.
On Fri, 22 Jun 2018 at 14:58, Per Salmi per.salmi@gmail.com wrote:
Ok, so the problem is similar on Linux also? In my case 5.44 works well without crashes, only 5.45 and 5.46 is broken on Windows.
Den fre 22 juni 2018 15:55Mark Brookes mark@loadbalancer.org skrev:
We have just hit the same problem with 5.45. 5.41 does not appear to exhibit the same issue.
The problem appears to be linked to the client/session. Using sni if we hit the url with one client the page loads fine, if we hit stunnel with a second connection from another client on a different IP their page reloads fine. But if we reload either of those pages stunnel segfaults with the following message -
Jun 22 11:42:31 lbmaster kernel: stunnel[6510]: segfault at 178 ip 00007fc64fcb5fe0 sp 00007fc6500f5948 error 4 in libssl.so.1.0.0[7fc64fc75000+65000]
The above was generated with stunnel 5.45 and openssl 1.0.2j-fips. I also tested it with stunnel built against 1.1.0h and had the same issue. Below is the config - pid = /var/run/stunnel/stunnel.pid debug = local1.0 socket = a:IP_FREEBIND=yes fips = no sslVersion = all
[VIP_Name-1] cert = /etc/loadbalancer.org/certs/sslcert1/sslcert1.pem ciphers = ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:DHE-RSA-AES256-SHA256:!RC4:!MD5:!aNULL:!EDH:!3DES accept = 192.168.0.112:443 connect = 192.168.0.112:80 delay = yes options = NO_SSLv3 options = NO_TLSv1 options = NO_TLSv1.1 options = DONT_INSERT_EMPTY_FRAGMENTS renegotiation = no local = 192.168.0.112 TIMEOUTclose = 0 [fizzygood] sni = VIP_Name-1:lb1.testdomain.co.uk cert = /etc/loadbalancer.org/certs/sslcert1/sslcert1.pem ciphers = ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-SHA256:AES128-SHA256:AES256-SHA:AES128-SHA:DHE-RSA-AES256-SHA256:!RC4:!MD5:!aNULL:!EDH:!3DES connect = 192.168.0.112:80 delay = yes options = NO_SSLv3 options = NO_TLSv1 options = DONT_INSERT_EMPTY_FRAGMENTS renegotiation = no local = 192.168.0.112
On Thu, 21 Jun 2018 at 20:08, Per Salmi per.salmi@gmail.com wrote:
I have exactly the same problem with stunnel 5.45 and 5.46 crashing on second request!
Running on Windows 10 Pro x64 1803.
I also use https to separate traffic to two different sites on the same server as the stunnel service.
/Per
Den tor 21 juni 2018 19:04Javier jamilist.stn@gmx.es skrev:
Hi,
isn't annoying when you are using an old version, 5.44, and all goes fine, you notice you are outdated and then comes the problems after update? :-P
The thing is that yesterday I needed the HTTPS server so I run Stunnel 5.44 for my non-SSL app and all was fine. I updated to 5.46 just because I forgot the last time and didn't even run again because I didn't need it.
Today I used it and... I had a crash. I tested 5.45 to trace versions back, and it crashes as well. Back to 5.44 and no crash.
The crash happens when there is a reload/reconnect/multiconnect (example, 2 connections html+images) by the browser when connects to an HTTPS server.
It only happens when using a SNI service.
I've been able to trace back the log on those versions and when fails in 5.45 and 5.46 is at the time when it needs to switch to the SNI service.
(log from 5.44) SNI: requested servername: xxx SNI: matched pattern: xxx SNI: switched to service [xxx] <<<<----- BEFORE SWITCH, IT CRASHES on 5.45 and 5.46
Imagine you load https://xxx/.
The first time is fine, the second, crashes stunnel. Not happening with 5.44.
I haven't seen any change to SNI in manual so... :-?
These are the configs for the used virtual servers. Nothing has been changed, anyway:
[SSL] client = no
accept = y.y.y.1:4747 connect = y.y.y.2:443
[SSL-xxx-SNI] client = no sni = SSL:xxx
connect = y.y.y.2:443
cert = pem key = pem
Don't mind the port numbers. They aren't in conflict.
Running on Windows 2000.
Regards. _______________________________________________ stunnel-users mailing list stunnel-users@stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
stunnel-users mailing list stunnel-users@stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users
--
Mark Brookes Loadbalancer.org Ltd. www.loadbalancer.org
+44 (0)330 380 1064 mark@loadbalancer.org