Paul,
Ad 1. Within 4 weeks. Ad 2. Nothing, I'm afraid.
Best regards, Mike
-----Original Message----- From: stunnel-users-bounces@mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Paul Hethmon Sent: Wednesday, December 07, 2005 3:12 PM To: stunnel-users@mirt.net Subject: RE: [stunnel-users] Windows config with both SSL listenandnon-SSLlisten
Michal,
Ok, the next obvious questions then:
1. When is 4.15 expected? 2. If not in the next 7 days, what can I do to help?
I've done C/C++ and sockets for the last 10 years. I've looked at the code briefly so far, but have not set up a build environment yet. I need it in the next week so if there is any coding I can do which would help you, let me know your thoughts and where to put stuff.
Also, just a public thanks for putting the package together. I started coding my own a couple of days ago and then thought there must have been someone else who just needed an SSL tunnel (and not a full blown SSH setup).
Thanks,
Paul
-----Original Message----- From: stunnel-users-bounces@mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: Wednesday, December 07, 2005 9:03 AM To: stunnel-users@mirt.net Subject: RE: [stunnel-users] Windows config with both SSL listen andnon-SSLlisten
Paul,
This feature is going to be supported in the next release (4.15).
Your config will look like this:
[inbound] client = no accept = 5102 connect = 5010
[outbound] client = yes accept = 5101 connect = x.x.x.x:5102
Best regards, Mike
________________________________
From: stunnel-users-bounces@mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Paul Hethmon Sent: Wednesday, December 07, 2005 2:50 PM To: stunnel-users@mirt.net Subject: [stunnel-users] Windows config with both SSL listen and non-SSLlisten
I'm trying to set up using the Windows service the ability to listen in SSL mode on one port (5102) and forward to non-SSL port (5010) and then also listen on one port (5101) in non-SSL mode and forward to a remote port (5102) in SSL mode. What I have currently in the config is:
[inbound] accept = 5102 connect = 5010
[outbound] accept = 5101 connect = x.x.x.x:5102
The first STunnel example on the website talks about doing this, sort of, but I don't see any options to specify on a service configuration level whether the listen port is in SSL or non-SSL mode. The use of a service name like [pop3] vs [pop3s] seems to imply a difference, but I've got a custom application I'm trying to tunnel two way, not a standard IETF service.
A perusal of the last year's mailing list archives didn't yield anything. I guess the next step is to look at the source and see if it's supported unless someone here can tell me one way or the other. If it's not supported, I guess I'll add it in.
thanks,
Paul
Paul Hethmon Senior Engineer ClareityT Security SAFEMLST Security Education, Consulting and Solutions http://www.SAFEMLS.com http://www.safemls.com/ paul.hethmon@callclareity.com work: 865.671.6630 cell: 865.250.3517
_______________________________________________ stunnel-users mailing list stunnel-users@mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users@mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users