Chris,

I've stopped building my own copy,  I'll give 5.53 a try when archlinuxarm releases it.  The arch linux group is very much leading edge, so I expect it will be soon.

Thanks,
Carter

On 5/8/2019 3:06 PM, Christopher Schultz wrote:
Carter,

On 5/8/19 14:47, Carter Browne wrote:

I received the following error trying to connect to a Windows host using
RDP.  I use stunnel as a connection point with secure messages coming in
and then forwarded as secure messages going the desired end point. 
Stunnel is running on all three systems, the originator, the relay, and
the destination.  I have been using stunnel in this role for many
years.  As an additional point, 5.51 did work properly in the same role
for secure telnet.  The part of the log showing the failure is below.

Can you try again with stunnel 5.53? It looks like both 5.51 and 5.52
have some serious problems and maybe shouldn't be used in production.

-chris



_______________________________________________
stunnel-users mailing list
stunnel-users@stunnel.org
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users