Hi
I did solve the issue with the solution as described in the first email in the chain. Thanks for your comments and support.
Get Outlook for Androidhttps://aka.ms/ghei36
________________________________ From: Eric Eberhard flash@vicsmba.com Sent: Thursday, August 22, 2019 3:59:31 PM To: 'Brent Kimberley' brent_kimberley@rogers.com; stunnel-users@stunnel.org stunnel-users@stunnel.org Cc: Daniel Trickett daniel.trickett@milliporesigma.com Subject: [Newsletter/Marketing] RE: [stunnel-users] stunnel-users Digest, Vol 181, Issue 3
Thanks :) -- I think Daniel can solve his problem. If for some reason he cannot make the app server output clear text he has to do it as you laid out. If he can, he can do one stunnel with TLSv1.2 by making the app output clear text. Both will work and should be secure. I’d do the latter is possible – way less overhead doing encryption. We use similar logic with one stunnel and have millions of transactions daily (XML not cXML but that does not matter – ours are often fairly large as in 100s of MB). Encrypting clear to SSLv3 then back to clear to TLSv1.2 is three encryptions along that path instead of one by making the app output clear text. The app will also shrink if that matters as it won’t need encryption code.
E
From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of Brent Kimberley Sent: Thursday, August 22, 2019 7:29 AM To: stunnel-users@stunnel.org Subject: Re: [stunnel-users] stunnel-users Digest, Vol 181, Issue 3
there is no reason to connect to localhost with any security
Should server/interface consolidation trigger functional/technical rework prior to go live?
As per the diagram: the app server node x TLS engine node interface is wrapped in SSL the internal localhost x localhost interface is in the clear the TLS engine node x punchout-vendor node is wrapped in TLSv1.2
SNI flag (RFC 3546)
Good catch.
----------------------------------------------------------------------
Message: 1 Date: Wed, 21 Aug 2019 08:01:08 -0700 From: "Eric Eberhard" <flash@vicsmba.commailto:flash@vicsmba.com> To: "'Brent Kimberley'" <brent_kimberley@rogers.commailto:brent_kimberley@rogers.com>, <stunnel-users@stunnel.orgmailto:stunnel-users@stunnel.org>
Thank you -- what I had in mind but I am not that fancy with the setups as we use one. We go from our application in clear text to stunnel TLSv1.2 which is clearly easier. I did make this work for a short while a long time ago and did not save the files. Plus no may people's horror we use inetd. Of course we only transfer 4 million XML docs per day and handle 10 million Web calls and another million connections for credit cards, etc. I have been told that if I had serious volume inetd is slower -:) but I have not noticed enough of a slowdown to matter. And inetd (at least on an IBM AIX server) is dead reliable and easy.
As a curiosity -- as I often see people coding unnecessarily -- there is no reason to connect to localhost with any security at all unless your app can only output SSLv3 which would imply a 3rd party vendor. The traffic never hits the network in any way -- not even the network card -- it goes directly to/from the TCP/IP stack which is why I mentioned just making the app send clear text to one stunnel that outputs TLSv1.2 ... if possible (may not be if it is something you don't have source to).
Eric
-----Original Message----- From: Brent Kimberley [mailto:brent_kimberley@rogers.commailto:brent_kimberley@rogers.com] Sent: Tuesday, August 20, 2019 6:42 AM To: stunnel-users@stunnel.orgmailto:stunnel-users@stunnel.org Cc: daniel.trickett@milliporesigma.commailto:daniel.trickett@milliporesigma.com; flash@vicsmba.commailto:flash@vicsmba.com Subject: Re: stunnel-users Digest, Vol 181, Issue 1
Your mileage may vary.
############################################################################### # From internal application to external host ############################################################################### # [Int_Init] -> [Int_Term] -> [Ext_Init] -> [Ext_Term] ############################################################################### # [internal_initiator] ---ssl---> [Internal terminator] # [Internal terminator] ---http---> [external Initiator] # [external Initiator] ---tls---> [external terminator] ############################################################################### # https://www.stunnel.org/static/stunnel.html https://clicktime.symantec.com/3hPKYmesDrxGuE2bv5e7rh6H2?u=https%3A%2F%2Fwww.stunnel.org%2Fstatic%2Fstunnel.html%2520 ###############################################################################
[Internal_Terminator] options = SSLv3 client = no accept = host_ip:443 connect = localhost:54321 CAfile = int_init_wallet.pem cert = int_term_pub.pem key = int_term_priv.pem
[External_Initiator] options = SINGLE_ECDH_USE options = SINGLE_DH_USE ciphers = ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256 verify = 3? client = yes options = TLSv1.2 accept = localhost:54321 connect = externalhostname:443 verifyChain = yes renegotiation = no CAfile = ext_term_wallet.pem cert = ext_init_pub.pem key = ext_init_priv.pem
----------------------------------------------------------------------
Date: Mon, 19 Aug 2019 18:21:18 +0000 From: Daniel Trickett <daniel.trickett@milliporesigma.commailto:daniel.trickett@milliporesigma.com> To: "stunnel-users@stunnel.orgmailto:stunnel-users@stunnel.org" <stunnel-users@stunnel.orgmailto:stunnel-users@stunnel.org> Subject: [stunnel-users] https to https proxy
Hi,
Our punchout vendor switched their site to only accept tls 1.2 over the weekend. Unfortunately our application will only support SSL.
We are using stunnel with other vendors but can control the inbound host name. This recent one is one we can't manage as it is the software provider.
I found a solution for doing https to https. I'm unclear how I get the first https traffic to route to stunnel as the initial call will be from the application will be to the external host.. Any thoughts on whether this would work for my situation? Appreciate any thoughts..
[Tunnel_in] client = yes accept = host_ip:443 connect = localhost:54321
[Tunnel_out] client = no accept = localhost:54321 connect = externalhostname:443
Best regards,
Dan