Hi everyone, i'm new to this. got a task to update stunnel from 4.52 to 5.00b1. 1. ./configure --host arm-none-linux-gnueabi --target arm-none-linux-gnueabi --prefix= i compared the makefile with the one in our 4.52 code base, same. 2. build with make -C stunnel CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm 3. scp to ARM board, run without arugments, core dump. (the line number might be different as i was putting printfs. but as long as it enters parse_commandline, it crashes) [New LWP 867]Cannot access memory at address 0x70797263(gdb) bt#0 parse_commandline (name=0xbefdce29 "/opt/ultra/config/stunnel.conf", parameter=0xbefdce48 "-version") at options.c:1940#1 0x0003ba04 in main_configure (arg1=0xbefdce29 "/opt/ultra/config/stunnel.conf", arg2=0xbefdce48 "-version") at stunnel.c:199#2 0x0003bd44 in main_unix (argv=<optimized out>, argc=<optimized out>)at stunnel.c:135#3 main (argc=3, argv=0xbefdcd24) at stunnel.c:110my question is, it crashed when just entering parse_commandline( ),the 2 arguments look fine to me.How could this happen ?Many thanks !