Hello,
I have encountered a couple of issues with stunnel 4.45 on RHEL 5.5.
I tried configuring stunnel to log messages in /var/log/messages and later found that messages were logged both in that file AND /var/log/messages.
In stunnel.conf, I had specified: debug=local6.info
In syslog.conf: local6.* /var/log/stunnel.log
I could achieve what I wanted only with the combination of the following two options: syslog=no output=/usr/local/app/stunnel/var/stunnel.log
Is this expected?
The second issue I have noticed is that stunnel seems to have a bit of trouble handling the hup signal. If you start stunnel specifying a relative path to the config, sending hup will cause stunnel to log and error but it won't exit.
2012.03.01 16:31:29 LOG5[19000:0]: Reading configuration from file etc/server.conf 2012.03.01 16:31:29 LOG3[19000:0]: etc/server.conf: No such file or directory (2) 2012.03.01 16:31:29 LOG3[19000:0]: Cannot read configuration 2012.03.01 16:31:29 LOG3[19000:0]: Failed to reload the configuration file
If you specify an absolute path, no error will be reported but stunnel will exit anyway.