Hi,
Well I got it started on VMS and wanted to put it in debug mode, so I shut it down made my changes to the conf file and now well I can't start it with the command procedure.
I even tried the old conf and same thing...
$ @STUNNEL_STARTUP_SERVER Is the private key (in the PEM file) encrypted? [Y/N]: Y Enter the password to decrypt the key (please use paired double quotes with it): ""XXXXXXXXX"" Starting up a Stunnel %RUN-S-PROC_ID, identification of created process is 209FCA70 Stunnel server failed to start up-- check the configuration, etc.
Nothing is logged...
But if I do the following
$ stunnel STUNNEL_SERVER.CONF
And the output to the screen... 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Snagged 64 random bytes from sys$common:[sysmgr].rnd 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Wrote 1024 new random bytes to sys$common:[sysmgr].rnd 2015.04.24 10:35:24 LOG7[547326662:2071228096]: RAND_status claims sufficient entropy for the PRNG 2015.04.24 10:35:24 LOG7[547326662:2071228096]: PRNG seeded successfully 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Certificate: stunnel.pem 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Certificate loaded 2015.04.24 10:35:24 LOG7[547326662:2071228096]: Key file: stunnel.pem Enter PEM pass phrase: 2015.04.24 10:35:31 LOG7[547326662:2071228096]: Private key loaded 2015.04.24 10:35:31 LOG7[547326662:2071228096]: SSL context initialized for service telnet
This is where it sits unless I do a ctrl-c to cancel and get back to the system prompt.
And when I do my telnet session I cannot connect. Well I connect but no prompts for me to login
But now I have log output! :)
2015.04.24 10:08:31 LOG5[547326662:2071228096]: stunnel undefined on vax-openvms with OpenSSL 0.9.8h 28 May 2008 2015.04.24 10:08:31 LOG5[547326662:2071228096]: Threading:PTHREAD Sockets:POLL,IPv4 2015.04.24 10:08:31 LOG6[547326662:2071228096]: file ulimit = 512 (can be changed with 'ulimit -n') 2015.04.24 10:08:31 LOG6[547326662:2071228096]: poll() used - no FD_SETSIZE limit for file descriptors 2015.04.24 10:08:31 LOG5[547326662:2071228096]: 250 clients allowed 2015.04.24 10:08:31 LOG7[547326662:2071228096]: FD 5 in non-blocking mode 2015.04.24 10:08:31 LOG7[547326662:2071228096]: FD 4 in non-blocking mode 2015.04.24 10:08:31 LOG7[547326662:2071228096]: FD 6 in non-blocking mode 2015.04.24 10:08:31 LOG7[547326662:2071228096]: SO_REUSEADDR option set on accept socket 2015.04.24 10:08:31 LOG7[547326662:2071228096]: telnet bound to 0.0.0.0: 2015.04.24 10:15:00 LOG3[547326662:2071228096]: Received signal 2; terminating 2015.04.24 10:18:18 LOG5[547326662:2071228096]: stunnel undefined on vax-openvms with OpenSSL 0.9.8h 28 May 2008 2015.04.24 10:18:18 LOG5[547326662:2071228096]: Threading:PTHREAD Sockets:POLL,IPv4 2015.04.24 10:18:18 LOG6[547326662:2071228096]: file ulimit = 512 (can be changed with 'ulimit -n') 2015.04.24 10:18:18 LOG6[547326662:2071228096]: poll() used - no FD_SETSIZE limit for file descriptors 2015.04.24 10:18:18 LOG5[547326662:2071228096]: 250 clients allowed 2015.04.24 10:18:18 LOG7[547326662:2071228096]: FD 5 in non-blocking mode 2015.04.24 10:18:18 LOG7[547326662:2071228096]: FD 4 in non-blocking mode 2015.04.24 10:18:18 LOG7[547326662:2071228096]: FD 6 in non-blocking mode 2015.04.24 10:18:18 LOG7[547326662:2071228096]: SO_REUSEADDR option set on accept socket 2015.04.24 10:18:19 LOG7[547326662:2071228096]: telnet bound to 0.0.0.0: 2015.04.24 10:21:08 LOG6[547326662:2071228096]: going to accept mode 2015.04.24 10:21:08 LOG7[547326662:2071228096]: telnet accepted FD=7 from 192.168.20.140:59281 2015.04.24 10:21:08 LOG6[547326662:2071228096]: accepted connection 2015.04.24 10:21:08 LOG7[547326662:8966656]: telnet started 2015.04.24 10:21:08 LOG7[547326662:8966656]: FD 7 in non-blocking mode 2015.04.24 10:21:08 LOG7[547326662:8966656]: TCP_NODELAY option set on local socket 2015.04.24 10:21:08 LOG5[547326662:8966656]: telnet accepted connection from 0.0.0.0: 2015.04.24 10:21:08 LOG7[547326662:8966656]: SSL state (accept): before/accept initialization 2015.04.24 10:21:30 LOG3[547326662:8966656]: SSL_accept: Peer suddenly disconnected 2015.04.24 10:21:30 LOG5[547326662:8966656]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.04.24 10:21:30 LOG7[547326662:8966656]: telnet finished (0 left) 2015.04.24 10:21:31 LOG6[547326662:2071228096]: going to accept mode 2015.04.24 10:21:31 LOG7[547326662:2071228096]: telnet accepted FD=7 from 192.168.20.140:59283 2015.04.24 10:21:31 LOG6[547326662:2071228096]: accepted connection 2015.04.24 10:21:31 LOG7[547326662:8966656]: telnet started 2015.04.24 10:21:31 LOG7[547326662:8966656]: FD 7 in non-blocking mode 2015.04.24 10:21:31 LOG7[547326662:8966656]: TCP_NODELAY option set on local socket 2015.04.24 10:21:31 LOG5[547326662:8966656]: telnet accepted connection from 0.0.0.0: 2015.04.24 10:21:31 LOG7[547326662:8966656]: SSL state (accept): before/accept initialization 2015.04.24 10:21:32 LOG3[547326662:8966656]: SSL_accept: Peer suddenly disconnected 2015.04.24 10:21:32 LOG5[547326662:8966656]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.04.24 10:21:32 LOG7[547326662:8966656]: telnet finished (0 left) 2015.04.24 10:21:33 LOG6[547326662:2071228096]: going to accept mode 2015.04.24 10:21:33 LOG7[547326662:2071228096]: telnet accepted FD=7 from 192.168.20.140:59284 2015.04.24 10:21:33 LOG6[547326662:2071228096]: accepted connection 2015.04.24 10:21:33 LOG7[547326662:8966656]: telnet started 2015.04.24 10:21:33 LOG7[547326662:8966656]: FD 7 in non-blocking mode 2015.04.24 10:21:33 LOG7[547326662:8966656]: TCP_NODELAY option set on local socket 2015.04.24 10:21:33 LOG5[547326662:8966656]: telnet accepted connection from 0.0.0.0: 2015.04.24 10:21:33 LOG7[547326662:8966656]: SSL state (accept): before/accept initialization 2015.04.24 10:21:34 LOG3[547326662:8966656]: SSL_accept: Peer suddenly disconnected 2015.04.24 10:21:34 LOG5[547326662:8966656]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2015.04.24 10:21:34 LOG7[547326662:8966656]: telnet finished (0 left)
Paul J Coviello Senior System Administrator
CCS Corporate Headquarters Two Wells Avenue, Newton, MA 02459 617.965.2000, Ext. 4004
[cid:image001.png@01D07E7A.602FCE40]
[cid:image002.gif@01D07E7A.602FCE40]
CCS Commercial, LLC | CCS Resources, Inc. | ClaimAssist, LLC | Credit Control Services, Inc. Customer Contact Solutions, LLC | Enterprise Associates, LLC
