I have a little service which listen only on
https://localhost:4952 and checks source hostname. I want to connect on "listen:1988" and redirect requests with stunnel to "localhost:4952"
https://192.168.1.10:1988
-> redirect
https://localhost:4952 I am trying to configure stunnel like this
[myservice]
cert = stunnel.pem
client = yes
accept =
0.0.0.0:1988 connect = localhost:4952
remote machine$ curl
https://192.168.1.25:9999/DYMO/DLS/Printing/Check -v
* Trying 192.168.1.25...
* Connected to 192.168.1.25 (192.168.1.25) port 9999 (#0)
* WARNING: using IP address, SNI is being disabled by the OS.
* Unknown SSL protocol error in connection to 192.168.1.25:-9847
* Closing connection 0
curl: (35) Unknown SSL protocol error in connection to 192.168.1.25:-9847
stunnel.log:
2015.10.09
09:05:42 LOG5[38]: Service [myservice] accepted connection from
192.168.1.24:60748 2015.10.09 09:05:42 LOG6[38]: failover: round-robin, starting at entry #1
2015.10.09 09:05:42 LOG6[38]: s_connect: connecting
127.0.0.1:41952 2015.10.09 09:05:42 LOG5[38]: s_connect: connected
127.0.0.1:41952 2015.10.09 09:05:42 LOG5[38]: Service [myservice] connected remote server from
127.0.0.1:50503 2015.10.09 09:05:42 LOG6[38]: SNI: sending servername: localhost
2015.10.09 09:05:42 LOG6[38]: Certificate verification disabled
2015.10.09 09:05:42 LOG6[38]: Certificate verification disabled
2015.10.09
09:05:42 LOG6[38]: SSL connected: new session negotiated
2015.10.09 09:05:42 LOG6[38]: Negotiated TLSv1 ciphersuite AES128-SHA (128-bit encryption)
2015.10.09 09:05:42 LOG6[38]: SSL socket closed (SSL_read)
2015.10.09 09:05:42 LOG5[38]: Connection closed: 230 byte(s) sent to SSL, 505 byte(s) sent to socket
I am tried verify = 1 to 4, either works. :(
Best Regards,
Adrian