Thank you for helping, but both logs r not presented in my var/log/ dir. Any other suggestions?


Mr. Jack
 



 
> From: sunyucong@gmail.com
> Date: Mon, 25 Apr 2011 16:25:20 -0700
> Subject: Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization
> To: jackliu92@hotmail.com
> CC: stunnel-users@stunnel.org
>
> Are you sure that's entire log? check /var/log/daemons.log and
> syslog.log as well.
>
> On Sun, Apr 24, 2011 at 1:30 AM, Jack Liu <jackliu92@hotmail.com> wrote:
> > It anyone knows how to fix Stunnel stuck at SSL state (accept):
> > before/accept initialization???
> >
> > Here is the log:
> > -----------------------------------------------------------------------------------------------------------
> > [root@vps1 ~]#stunnel /etc/stunnel/stunnel.conf
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Snagged 64 random bytes from
> > /root/.rnd
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Wrote 1024 new random bytes to
> > /root/.rnd
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: RAND_status claims sufficient
> > entropy for the PRNG
> > 2011.04.24 02:25:13 LOG6[32174:3085993680]: PRNG seeded successfully
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Certificate:
> > /etc/stunnel/stunnel.pem
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Key file:
> > /etc/stunnel/stunnel.pem
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Verify directory set to
> > /etc/stunnel/CA
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: CRL directory set to
> > /etc/stunnel/CRL
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: SSL context initialized for
> > service 3proxy
> > 2011.04.24 02:25:13 LOG5[32174:3085993680]: stunnel 4.15 on
> > i686-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
> > 2011.04.24 02:25:13 LOG5[32174:3085993680]: Threading:PTHREAD SSL:ENGINE
> > Sockets:POLL,IPv6 Auth:LIBWRAP
> > 2011.04.24 02:25:13 LOG6[32174:3085993680]: file ulimit = 1024 (can be
> > changed with 'ulimit -n')
> > 2011.04.24 02:25:13 LOG6[32174:3085993680]: poll() used - no FD_SETSIZE
> > limit for file descriptors
> > 2011.04.24 02:25:13 LOG5[32174:3085993680]: 500 clients allowed
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 3 in non-blocking mode
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 4 in non-blocking mode
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 5 in non-blocking mode
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: SO_REUSEADDR option set on
> > accept socket
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: 3proxy bound to 0.0.0.0:30001
> > 2011.04.24 02:25:13 LOG7[32174:3085993680]: Created pid file
> > /var/run/stunnel.pid
> > 2011.04.24 02:25:20 LOG7[32174:3085993680]: 3proxy accepted FD=6 from
> > xx.xxx.xxx.xx:41165
> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: 3proxy started
> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 6 in non-blocking mode
> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 7 in non-blocking mode
> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 8 in non-blocking mode
> > 2011.04.24 02:25:20 LOG7[32174:3085993680]: Cleaning up the signal pipe
> > 2011.04.24 02:25:20 LOG6[32174:3085993680]: Child process 32176 finished
> > with code 0
> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: Connection from
> > xx.xxx.xxx.xx:41165 permitted by libwrap
> > 2011.04.24 02:25:20 LOG5[32174:3085990800]: 3proxy connected from
> > xx.xxx.xxx.xx:41165
> > 2011.04.24 02:25:20 LOG7[32174:3085990800]: SSL state (accept):
> > before/accept initialization          <-----------------------Stuck here
> > forever!!!
> > 2011.04.24 02:25:22 LOG3[32174:3085990800]: SSL_accept: Peer suddenly
> > disconnected
> > 2011.04.24 02:25:22 LOG5[32174:3085990800]: Connection reset: 0 bytes sent
> > to SSL, 0 bytes sent to socket
> > 2011.04.24 02:25:22 LOG7[32174:3085990800]: 3proxy finished (0 left)
> > 2011.04.24 02:25:25 LOG3[32174:3085993680]: Received signal 2; terminating
> > 2011.04.24 02:25:25 LOG7[32174:3085993680]: removing pid file
> > /var/run/stunnel.pid
> > [root@vps1 ~]#
> > -----------------------------------------------------------------------------------------------------------
> > stunnel.conf:
> > cert = /etc/stunnel/stunnel.pem
> > key = /etc/stunnel/stunnel.pem
> > CApath = /etc/stunnel/CA
> > CRLpath =  /etc/stunnel/CRL
> > debug = 7
> > foreground = yes
> > verify = 1
> > #
> > [3proxy]
> > accept = 30001
> > connect = 127.0.0.1:33135
> > -----------------------------------------------------------------------------------------------------------
> >
> > I am hosting with CentOS 5.5, and installed Stunnel via yum.
> > Planning to use it with 3Proxy. However I experience the problem above, can
> > someone please help with that?
> > Thank you very much!
> >
> >
> >
> > Mr. Jack
> >
> > _______________________________________________
> > stunnel-users mailing list
> > stunnel-users@stunnel.org
> > http://stunnel.mirt.net/mailman/listinfo/stunnel-users
> >
> >