Hi Apurva,
For us to help, we need your stunnel.conf.
Is this bug NEW ? was there a recent change either on client-side or server-side ?

Can you try with LAST (recent versions) of openssl (there are TWO ! 100b and 098p) ?
...

HMMMMMMMM: may I have understood something :
in your stunnel.conf you seem to have bound MANY stunnel SERVICES to the SAME listening port 3005.
This is what I consider an error !
service1 SHOULD listen on 3005, service2 on 3006 etc...

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp1 bound to 127.0.0.1:3005

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp1 opened FD=224

2010.11.18 10:42:11 LOG7[5732:7408]: FD=228 in non-blocking mode

2010.11.18 10:42:11 LOG7[5732:7408]: Option SO_REUSEADDR set on accept socket

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp2 bound to 127.0.0.1:3005

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp2 opened FD=228

2010.11.18 10:42:11 LOG7[5732:7408]: FD=244 in non-blocking mode

2010.11.18 10:42:11 LOG7[5732:7408]: Option SO_REUSEADDR set on accept socket

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp3 bound to 127.0.0.1:3005

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp3 opened FD=244


Hope this helps (it should),
Pierre


Le 19/11/2010 01:47, Pathak, Apurva (Apu) a écrit :

Hello,

 

I am getting an error with using stunnel 4.34. I am running on Windows Server 2003. Unfortunately, this has cropped up only after we went to production, so there is no turning back now. Urgent help is needed.

 

Reporting queued error: faulting application stunnel.exe, version 0.0.0.0, faulting module libeay32.dll, version 1.0.0.1, fault address 0x0007331e.

 

I am using stunnel to encrypt SMPP (or SMS text messages).

 

The above error is occurring very frequently when I run stunnel in Windows Service mode. Once this happens and I go through the same two steps to re-establish binds with my wireless carrier (1) restart stunnel (2) restart my SMPP service. The following happens (1) Stunnel starts with: Option SO_REUSEADDR set on accept socket (2) I am not able to establish binds error in stunnel.log: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol

 

When the above error is happening, the way to get things to work is to go: Start > Programs > stunnel > Start Service and things still work (Stunnel runs as me in user mode and not as “SYSTEM”, stunnel does still start with Option SO_REUSEADDR set on accept socket but binds starts OK). Of course, as soon as I log off the server, everything stops so this of not much use, but this is working for some reason.

 

Complete stunnel.log:

 

 

2010.11.18 10:42:11 LOG5[5732:7408]: Reading configuration from file stunnel.conf

2010.11.18 10:42:11 LOG7[5732:7408]: PRNG seeded successfully

2010.11.18 10:42:11 LOG6[5732:7408]: Could not load DH parameters from carrier.cer

2010.11.18 10:42:11 LOG7[5732:7408]: ECDH initialized

2010.11.18 10:42:11 LOG7[5732:7408]: Certificate: carrier.cer

2010.11.18 10:42:11 LOG7[5732:7408]: Certificate loaded

2010.11.18 10:42:11 LOG7[5732:7408]: Key file: carriernew.key

2010.11.18 10:42:11 LOG7[5732:7408]: Private key loaded

2010.11.18 10:42:11 LOG7[5732:7408]: SSL context initialized for service ssmpp1

2010.11.18 10:42:11 LOG6[5732:7408]: Could not load DH parameters from carrier.cer

2010.11.18 10:42:11 LOG7[5732:7408]: ECDH initialized

2010.11.18 10:42:11 LOG7[5732:7408]: Certificate: carrier.cer

2010.11.18 10:42:11 LOG7[5732:7408]: Certificate loaded

2010.11.18 10:42:11 LOG7[5732:7408]: Key file: carriernew.key

2010.11.18 10:42:11 LOG7[5732:7408]: Private key loaded

2010.11.18 10:42:11 LOG7[5732:7408]: SSL context initialized for service ssmpp2

2010.11.18 10:42:11 LOG7[5732:7408]: Configuration SSL options: 0x80000FFF

2010.11.18 10:42:11 LOG7[5732:7408]: SSL options set: 0x80000FFF

2010.11.18 10:42:11 LOG7[5732:7408]: Certificate: carrier.cer

2010.11.18 10:42:11 LOG7[5732:7408]: Certificate loaded

2010.11.18 10:42:11 LOG7[5732:7408]: Key file: carriernew.key

2010.11.18 10:42:11 LOG7[5732:7408]: Private key loaded

2010.11.18 10:42:11 LOG7[5732:7408]: SSL context initialized for service ssmpp3

2010.11.18 10:42:11 LOG5[5732:7408]: Configuration successful

2010.11.18 10:42:11 LOG5[5732:7408]: No limit detected for the number of clients

2010.11.18 10:42:11 LOG7[5732:7408]: FD=224 in non-blocking mode

2010.11.18 10:42:11 LOG7[5732:7408]: Option SO_REUSEADDR set on accept socket

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp1 bound to 127.0.0.1:3005

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp1 opened FD=224

2010.11.18 10:42:11 LOG7[5732:7408]: FD=228 in non-blocking mode

2010.11.18 10:42:11 LOG7[5732:7408]: Option SO_REUSEADDR set on accept socket

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp2 bound to 127.0.0.1:3005

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp2 opened FD=228

2010.11.18 10:42:11 LOG7[5732:7408]: FD=244 in non-blocking mode

2010.11.18 10:42:11 LOG7[5732:7408]: Option SO_REUSEADDR set on accept socket

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp3 bound to 127.0.0.1:3005

2010.11.18 10:42:11 LOG7[5732:7408]: Service ssmpp3 opened FD=244

2010.11.18 10:42:11 LOG5[5732:7408]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010

2010.11.18 10:42:11 LOG5[5732:7408]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6

2010.11.18 10:42:24 LOG7[5732:6160]: Service ssmpp1 accepted FD=292 from 127.0.0.1:4214

2010.11.18 10:42:24 LOG7[5732:6160]: Creating a new thread

2010.11.18 10:42:24 LOG7[5732:6160]: New thread created

2010.11.18 10:42:24 LOG7[5732:2140]: Service ssmpp1 started

2010.11.18 10:42:24 LOG7[5732:2140]: FD=292 in non-blocking mode

2010.11.18 10:42:24 LOG7[5732:2140]: Option TCP_NODELAY set on local socket

2010.11.18 10:42:24 LOG5[5732:2140]: Service ssmpp1 accepted connection from 127.0.0.1:4214

2010.11.18 10:42:24 LOG7[5732:2140]: SSL state (accept): before/accept initialization

2010.11.18 10:42:24 LOG7[5732:6160]: Service ssmpp1 accepted FD=316 from 127.0.0.1:4215

2010.11.18 10:42:24 LOG7[5732:6160]: Creating a new thread

2010.11.18 10:42:24 LOG7[5732:6904]: Service ssmpp1 started

2010.11.18 10:42:24 LOG7[5732:6160]: New thread created

2010.11.18 10:42:24 LOG7[5732:6904]: FD=316 in non-blocking mode

2010.11.18 10:42:24 LOG7[5732:6904]: Option TCP_NODELAY set on local socket

2010.11.18 10:42:24 LOG5[5732:6904]: Service ssmpp1 accepted connection from 127.0.0.1:4215

2010.11.18 10:42:24 LOG7[5732:6904]: SSL state (accept): before/accept initialization

2010.11.18 10:42:24 LOG7[5732:6160]: Service ssmpp1 accepted FD=340 from 127.0.0.1:4216

2010.11.18 10:42:24 LOG7[5732:6160]: Creating a new thread

2010.11.18 10:42:24 LOG7[5732:6160]: New thread created

2010.11.18 10:42:24 LOG7[5732:5592]: Service ssmpp1 started

2010.11.18 10:42:24 LOG7[5732:5592]: FD=340 in non-blocking mode

2010.11.18 10:42:24 LOG7[5732:5592]: Option TCP_NODELAY set on local socket

2010.11.18 10:42:24 LOG5[5732:5592]: Service ssmpp1 accepted connection from 127.0.0.1:4216

2010.11.18 10:42:24 LOG7[5732:5592]: SSL state (accept): before/accept initialization

2010.11.18 10:42:24 LOG3[5732:5592]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol

2010.11.18 10:42:24 LOG5[5732:5592]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket

2010.11.18 10:42:24 LOG7[5732:5592]: Service ssmpp1 finished (2 left)

2010.11.18 10:42:34 LOG3[5732:2140]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol

2010.11.18 10:42:34 LOG5[5732:2140]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket

2010.11.18 10:42:34 LOG7[5732:2140]: Service ssmpp1 finished (1 left)

2010.11.18 10:42:44 LOG3[5732:6904]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol

2010.11.18 10:42:44 LOG5[5732:6904]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket

2010.11.18 10:42:44 LOG7[5732:6904]: Service ssmpp1 finished (0 left)

2010.11.18 10:43:04 LOG7[5732:6160]: Service ssmpp1 accepted FD=332 from 127.0.0.1:4237

2010.11.18 10:43:04 LOG7[5732:6160]: Creating a new thread

2010.11.18 10:43:04 LOG7[5732:6160]: New thread created

2010.11.18 10:43:04 LOG7[5732:2256]: Service ssmpp1 started

2010.11.18 10:43:04 LOG7[5732:2256]: FD=332 in non-blocking mode

2010.11.18 10:43:04 LOG7[5732:2256]: Option TCP_NODELAY set on local socket

2010.11.18 10:43:04 LOG5[5732:2256]: Service ssmpp1 accepted connection from 127.0.0.1:4237

2010.11.18 10:43:04 LOG7[5732:2256]: SSL state (accept): before/accept initialization

2010.11.18 10:43:04 LOG7[5732:6160]: Service ssmpp1 accepted FD=308 from 127.0.0.1:4238

2010.11.18 10:43:04 LOG7[5732:6160]: Creating a new thread

2010.11.18 10:43:04 LOG7[5732:6160]: New thread created

2010.11.18 10:43:04 LOG7[5732:6544]: Service ssmpp1 started

2010.11.18 10:43:04 LOG7[5732:6544]: FD=308 in non-blocking mode

2010.11.18 10:43:04 LOG7[5732:6544]: Option TCP_NODELAY set on local socket

2010.11.18 10:43:04 LOG5[5732:6544]: Service ssmpp1 accepted connection from 127.0.0.1:4238

2010.11.18 10:43:04 LOG7[5732:6544]: SSL state (accept): before/accept initialization

2010.11.18 10:43:04 LOG7[5732:6160]: Service ssmpp1 accepted FD=356 from 127.0.0.1:4239

2010.11.18 10:43:04 LOG7[5732:6160]: Creating a new thread

2010.11.18 10:43:04 LOG7[5732:6160]: New thread created

2010.11.18 10:43:04 LOG7[5732:7256]: Service ssmpp1 started

2010.11.18 10:43:04 LOG7[5732:7256]: FD=356 in non-blocking mode

2010.11.18 10:43:04 LOG7[5732:7256]: Option TCP_NODELAY set on local socket

2010.11.18 10:43:04 LOG5[5732:7256]: Service ssmpp1 accepted connection from 127.0.0.1:4239

2010.11.18 10:43:04 LOG7[5732:7256]: SSL state (accept): before/accept initialization

2010.11.18 10:43:04 LOG3[5732:2256]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol

2010.11.18 10:43:04 LOG5[5732:2256]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket

2010.11.18 10:43:04 LOG7[5732:2256]: Service ssmpp1 finished (2 left)

2010.11.18 10:43:09 LOG3[5732:7256]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol

2010.11.18 10:43:09 LOG5[5732:7256]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket

2010.11.18 10:43:09 LOG7[5732:7256]: Service ssmpp1 finished (1 left)

2010.11.18 10:43:12 LOG3[5732:6544]: SSL_accept: Peer suddenly disconnected

2010.11.18 10:43:12 LOG5[5732:6544]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket

2010.11.18 10:43:12 LOG7[5732:6544]: Service ssmpp1 finished (0 left)

 

 

 

Thanks,

Apurva