transfer() loop executes not transferring any data - stunnel-users

22 Jun 2010


      I just setup stunnel to partner with haproxy to handle https. My concern is
I saw the logs below on my stunnel logs. I don't know if I need to worry
about this since my testing using https is doing fine. stunnel is forwarding
https request to haproxy.
2010.06.22 07:57:27 LOG3[1363:2083728]: transfer() loop executes not
transferring any data
2010.06.22 07:57:27 LOG3[1363:2083728]: please report the problem to
Michal.Trojnara@mirt.net
2010.06.22 07:57:27 LOG3[1363:2083728]: protocol=TLSv1, check_SSL_pending=no
2010.06.22 07:57:27 LOG3[1363:2083728]: socket open: rd=yes wr=no, ssl open:
rd=no wr=yes
2010.06.22 07:57:27 LOG3[1363:2083728]: socket ready: rd=no wr=no, ssl
ready: rd=yes wr=no
2010.06.22 07:57:27 LOG3[1363:2083728]: wants: SSL_read rd=no wr=no,
SSL_write rd=no wr=yes, SSL_shutdown rd=no wr=no
2010.06.22 07:57:27 LOG3[1363:2083728]: socket input buffer: 16384 byte(s),
ssl input buffer: 0 byte(s)
Thanks,
Nelson