Hi,

The problem was because you used port 465 (SSL) instead of 587 (STARTTLS). It doesn't seem that 1&1 smtp supports connection on port 465.

Flo

On Tue, May 15, 2018 at 12:16 PM, Alix Janeth Jerez alixj@hotmail.com wrote:

Hi Flo:

Thanks for replying.

With gmail account it works ok.

I setted 1and1 mail account in outlook client with the parameters smtp.1and1.es port 587 and I can send and receive emails.

Thanks a lot.

Best regards,

---

*De:* Flo Rance trourance@gmail.com *Enviado:* martes, 15 de mayo de 2018 10:04 *Para:* Alix Janeth Jerez *Cc:* stunnel-users@stunnel.org *Asunto:* Re: [stunnel-users] Error with negotiation OK

Hi,

IMO, this problem has nothing to do with stunnel.

There are plenty of issues reported on the web, most of them related to Outlook.

Does it happen with all email addresses or a specific one ?

Flo

On Tue, May 15, 2018 at 9:56 AM, Alix Janeth Jerez alixj@hotmail.com wrote:

Hi

I am using lastest stunnel version.

When i try to send an email, i get:

*"error permanente de SMTP: 503 Bad sequence of commands".*

This is the trace generated when I try to send an email.

2018.05.14 12:59:08 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.14 12:59:08 LOG5[main]: UTF-8 byte order mark not detected 2018.05.14 12:59:08 LOG5[main]: FIPS mode disabled 2018.05.14 12:59:08 LOG5[main]: Configuration successful 2018.05.14 12:59:08 LOG7[main]: Binding service [pseudo-ssmtp] 2018.05.14 12:59:08 LOG7[main]: Listening file descriptor created (FD=568) 2018.05.14 12:59:08 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2018.05.14 12:59:08 LOG7[main]: Service [pseudo-ssmtp] (FD=568) bound to 172.31.41.84:116 2018.05.14 12:59:08 LOG7[main]: Signal pipe is empty 2018.05.14 12:59:22 LOG7[main]: Found 1 ready file descriptor(s) 2018.05.14 12:59:22 LOG7[main]: FD=324 ifds=r-x ofds=r-- 2018.05.14 12:59:22 LOG7[main]: Dispatching signals from the signal pipe 2018.05.14 12:59:22 LOG7[main]: Processing SIGNAL_RELOAD_CONFIG 2018.05.14 12:59:22 LOG7[main]: Running on Windows 6.1 2018.05.14 12:59:22 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.14 12:59:22 LOG5[main]: UTF-8 byte order mark not detected 2018.05.14 12:59:22 LOG5[main]: FIPS mode disabled 2018.05.14 12:59:22 LOG7[main]: Compression disabled 2018.05.14 12:59:22 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2018.05.14 12:59:22 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd 2018.05.14 12:59:22 LOG7[main]: PRNG seeded successfully 2018.05.14 12:59:22 LOG6[main]: Initializing service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2018.05.14 12:59:22 LOG7[main]: TLS options: 0x03000004 (+0x03000000, 0x00000000) 2018.05.14 12:59:22 LOG6[main]: Loading certificate from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Certificate loaded from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Loading private key from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Private key loaded from file: stunnel.pem 2018.05.14 12:59:22 LOG7[main]: Private key check succeeded 2018.05.14 12:59:22 LOG5[main]: Configuration successful 2018.05.14 12:59:22 LOG7[main]: Unbinding service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] closed (FD=568) 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] closed 2018.05.14 12:59:22 LOG7[main]: Binding service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Listening file descriptor created (FD=568) 2018.05.14 12:59:22 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] (FD=568) bound to 172.31.41.84:116 2018.05.14 12:59:22 LOG7[main]: Signal pipe is empty 2018.05.14 12:59:34 LOG7[main]: Found 1 ready file descriptor(s) 2018.05.14 12:59:34 LOG7[main]: FD=324 ifds=r-x ofds=--- 2018.05.14 12:59:34 LOG7[main]: Service [pseudo-ssmtp] accepted (FD=584) from 172.31.41.84:53557 2018.05.14 12:59:34 LOG7[main]: Creating a new thread 2018.05.14 12:59:34 LOG7[main]: New thread created 2018.05.14 12:59:34 LOG7[37]: Service [pseudo-ssmtp] started 2018.05.14 12:59:34 LOG7[37]: Option TCP_NODELAY set on local socket 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] accepted connection from 172.31.41.84:53557 2018.05.14 12:59:34 LOG6[37]: failover: round-robin, starting at entry #1 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 212.227.15.158:465 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 212.227.15.158:465: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 212.227.15.158:465 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] connected remote server from 172.31.41.84:53558 2018.05.14 12:59:34 LOG7[37]: Option TCP_NODELAY set on remote socket 2018.05.14 12:59:34 LOG7[37]: Remote descriptor (FD=552) initialized 2018.05.14 12:59:34 LOG6[37]: SNI: sending servername: smtp.1and1.es 2018.05.14 12:59:34 LOG6[37]: Peer certificate required 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): before/connect initialization 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): SSLv2/v3 write client hello A 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): SSLv3 read server hello A 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=2: C=US, O="thawte, Inc.", OU=Certification Services Division, OU="(c) 2006 thawte, Inc. - For authorized use only", CN=thawte Primary Root CA 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG7[37]: OCSP: Ignoring root certificate 2018.05.14 12:59:34 LOG6[37]: Certificate accepted at depth=2: C=US, O="thawte, Inc.", OU=Certification Services Division, OU="(c) 2006 thawte, Inc. - For authorized use only", CN=thawte Primary Root CA 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=1: C=US, O="thawte, Inc.", CN=thawte SSL CA - G2 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG5[37]: OCSP: Connecting the AIA responder " http://t2.symcb.com" 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 23.5.251.27:80: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: OCSP: Connected t2.symcb.com:80 2018.05.14 12:59:34 LOG7[37]: OCSP: Response received 2018.05.14 12:59:34 LOG6[37]: OCSP: Status: good 2018.05.14 12:59:34 LOG6[37]: OCSP: This update: May 13 18:15:02 2018 GMT 2018.05.14 12:59:34 LOG6[37]: OCSP: Next update: May 20 18:15:02 2018 GMT 2018.05.14 12:59:34 LOG5[37]: OCSP: Certificate accepted 2018.05.14 12:59:34 LOG6[37]: Certificate accepted at depth=1: C=US, O="thawte, Inc.", CN=thawte SSL CA - G2 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=0: C=DE, ST=Rheinland-Pfalz, L=Montabaur, O=1&1 Internet SE, CN=smtp.1and1.es 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG6[37]: CERT: Host name "smtp.1and1.es" matched with "smtp.1and1.es" 2018.05.14 12:59:34 LOG5[37]: OCSP: Connecting the AIA responder " http://tj.symcd.com" 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 23.5.251.27:80: waiting 10 seconds 2018.05.14 12:59:35 LOG5[37]: s_connect: connected 23.5.251.27:80 2018.05.14 12:59:35 LOG7[37]: OCSP: Connected tj.symcd.com:80 2018.05.14 12:59:35 LOG7[37]: OCSP: Response received 2018.05.14 12:59:35 LOG6[37]: OCSP: Status: good 2018.05.14 12:59:35 LOG6[37]: OCSP: This update: May 14 01:38:59 2018 GMT 2018.05.14 12:59:35 LOG6[37]: OCSP: Next update: May 21 01:38:59 2018 GMT 2018.05.14 12:59:35 LOG5[37]: OCSP: Certificate accepted 2018.05.14 12:59:35 LOG5[37]: Certificate accepted at depth=0: C=DE, ST=Rheinland-Pfalz, L=Montabaur, O=1&1 Internet SE, CN=smtp.1and1.es 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server certificate A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server key exchange A 2018.05.14 12:59:35 LOG6[37]: Client certificate not requested 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server done A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write client key exchange A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write change cipher spec A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write finished A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 flush data 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read finished A 2018.05.14 12:59:35 LOG7[37]: 1 client connect(s) requested 2018.05.14 12:59:35 LOG7[37]: 1 client connect(s) succeeded 2018.05.14 12:59:35 LOG7[37]: 0 client renegotiation(s) requested 2018.05.14 12:59:35 LOG7[37]: 0 session reuse(s) 2018.05.14 12:59:35 LOG6[37]: TLS connected: new session negotiated 2018.05.14 12:59:35 LOG7[37]: Peer certificate was cached (5543 bytes) 2018.05.14 12:59:35 LOG6[37]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.14 12:59:35 LOG7[37]: Compression: null, expansion: null 2018.05.14 12:59:53 LOG3[36]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2018.05.14 12:59:53 LOG5[36]: Connection closed: 15 byte(s) sent to TLS, 166 byte(s) sent to socket

I can't find the error.

Thanks in advance for your help.

Best regards,

Alix

---

stunnel-users mailing list stunnel-users@stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

Hi Alix,

Yes, it does. And I've tested it from the command line, it listens on port 465 with SSL.

So the problem might be related to Outlook, as stated before. I don't use Windows at all so I can't provide you much more information.

But still, IMO it has nothing to do with stunnel.

Flo

On Tue, May 15, 2018 at 12:56 PM, Alix Janeth Jerez alixj@hotmail.com wrote:

Hi Flo:

I used 465 port, because is the information that sent service provider

If you see this lines, it connect succesfully, or not?

2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 212.227.15.158:465 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 212.227.15.158:465: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 212.227.15.158:465 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] connected remote server from 172.31.41.84:53558

Best regards,

---

*De:* Flo Rance trourance@gmail.com *Enviado:* martes, 15 de mayo de 2018 10:28 *Para:* Alix Janeth Jerez *Cc:* stunnel-users@stunnel.org *Asunto:* Re: [stunnel-users] Error with negotiation OK

Hi,

The problem was because you used port 465 (SSL) instead of 587 (STARTTLS). It doesn't seem that 1&1 smtp supports connection on port 465.

Flo

On Tue, May 15, 2018 at 12:16 PM, Alix Janeth Jerez alixj@hotmail.com wrote:

Hi Flo:

Thanks for replying.

With gmail account it works ok.

I setted 1and1 mail account in outlook client with the parameters smtp.1and1.es port 587 and I can send and receive emails.

Thanks a lot.

Best regards,

---

*De:* Flo Rance trourance@gmail.com *Enviado:* martes, 15 de mayo de 2018 10:04 *Para:* Alix Janeth Jerez *Cc:* stunnel-users@stunnel.org *Asunto:* Re: [stunnel-users] Error with negotiation OK

Hi,

IMO, this problem has nothing to do with stunnel.

There are plenty of issues reported on the web, most of them related to Outlook.

Does it happen with all email addresses or a specific one ?

Flo

On Tue, May 15, 2018 at 9:56 AM, Alix Janeth Jerez alixj@hotmail.com wrote:

Hi

I am using lastest stunnel version.

When i try to send an email, i get:

*"error permanente de SMTP: 503 Bad sequence of commands".*

This is the trace generated when I try to send an email.

2018.05.14 12:59:08 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.14 12:59:08 LOG5[main]: UTF-8 byte order mark not detected 2018.05.14 12:59:08 LOG5[main]: FIPS mode disabled 2018.05.14 12:59:08 LOG5[main]: Configuration successful 2018.05.14 12:59:08 LOG7[main]: Binding service [pseudo-ssmtp] 2018.05.14 12:59:08 LOG7[main]: Listening file descriptor created (FD=568) 2018.05.14 12:59:08 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2018.05.14 12:59:08 LOG7[main]: Service [pseudo-ssmtp] (FD=568) bound to 172.31.41.84:116 2018.05.14 12:59:08 LOG7[main]: Signal pipe is empty 2018.05.14 12:59:22 LOG7[main]: Found 1 ready file descriptor(s) 2018.05.14 12:59:22 LOG7[main]: FD=324 ifds=r-x ofds=r-- 2018.05.14 12:59:22 LOG7[main]: Dispatching signals from the signal pipe 2018.05.14 12:59:22 LOG7[main]: Processing SIGNAL_RELOAD_CONFIG 2018.05.14 12:59:22 LOG7[main]: Running on Windows 6.1 2018.05.14 12:59:22 LOG5[main]: Reading configuration from file stunnel.conf 2018.05.14 12:59:22 LOG5[main]: UTF-8 byte order mark not detected 2018.05.14 12:59:22 LOG5[main]: FIPS mode disabled 2018.05.14 12:59:22 LOG7[main]: Compression disabled 2018.05.14 12:59:22 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2018.05.14 12:59:22 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd 2018.05.14 12:59:22 LOG7[main]: PRNG seeded successfully 2018.05.14 12:59:22 LOG6[main]: Initializing service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2018.05.14 12:59:22 LOG7[main]: TLS options: 0x03000004 (+0x03000000, 0x00000000) 2018.05.14 12:59:22 LOG6[main]: Loading certificate from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Certificate loaded from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Loading private key from file: stunnel.pem 2018.05.14 12:59:22 LOG6[main]: Private key loaded from file: stunnel.pem 2018.05.14 12:59:22 LOG7[main]: Private key check succeeded 2018.05.14 12:59:22 LOG5[main]: Configuration successful 2018.05.14 12:59:22 LOG7[main]: Unbinding service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] closed (FD=568) 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] closed 2018.05.14 12:59:22 LOG7[main]: Binding service [pseudo-ssmtp] 2018.05.14 12:59:22 LOG7[main]: Listening file descriptor created (FD=568) 2018.05.14 12:59:22 LOG7[main]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2018.05.14 12:59:22 LOG7[main]: Service [pseudo-ssmtp] (FD=568) bound to 172.31.41.84:116 2018.05.14 12:59:22 LOG7[main]: Signal pipe is empty 2018.05.14 12:59:34 LOG7[main]: Found 1 ready file descriptor(s) 2018.05.14 12:59:34 LOG7[main]: FD=324 ifds=r-x ofds=--- 2018.05.14 12:59:34 LOG7[main]: Service [pseudo-ssmtp] accepted (FD=584) from 172.31.41.84:53557 2018.05.14 12:59:34 LOG7[main]: Creating a new thread 2018.05.14 12:59:34 LOG7[main]: New thread created 2018.05.14 12:59:34 LOG7[37]: Service [pseudo-ssmtp] started 2018.05.14 12:59:34 LOG7[37]: Option TCP_NODELAY set on local socket 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] accepted connection from 172.31.41.84:53557 2018.05.14 12:59:34 LOG6[37]: failover: round-robin, starting at entry #1 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 212.227.15.158:465 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 212.227.15.158:465: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 212.227.15.158:465 2018.05.14 12:59:34 LOG5[37]: Service [pseudo-ssmtp] connected remote server from 172.31.41.84:53558 2018.05.14 12:59:34 LOG7[37]: Option TCP_NODELAY set on remote socket 2018.05.14 12:59:34 LOG7[37]: Remote descriptor (FD=552) initialized 2018.05.14 12:59:34 LOG6[37]: SNI: sending servername: smtp.1and1.es 2018.05.14 12:59:34 LOG6[37]: Peer certificate required 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): before/connect initialization 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): SSLv2/v3 write client hello A 2018.05.14 12:59:34 LOG7[37]: TLS state (connect): SSLv3 read server hello A 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=2: C=US, O="thawte, Inc.", OU=Certification Services Division, OU="(c) 2006 thawte, Inc. - For authorized use only", CN=thawte Primary Root CA 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG7[37]: OCSP: Ignoring root certificate 2018.05.14 12:59:34 LOG6[37]: Certificate accepted at depth=2: C=US, O="thawte, Inc.", OU=Certification Services Division, OU="(c) 2006 thawte, Inc. - For authorized use only", CN=thawte Primary Root CA 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=1: C=US, O="thawte, Inc.", CN=thawte SSL CA - G2 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG5[37]: OCSP: Connecting the AIA responder " http://t2.symcb.com" 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 23.5.251.27:80: waiting 10 seconds 2018.05.14 12:59:34 LOG5[37]: s_connect: connected 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: OCSP: Connected t2.symcb.com:80 2018.05.14 12:59:34 LOG7[37]: OCSP: Response received 2018.05.14 12:59:34 LOG6[37]: OCSP: Status: good 2018.05.14 12:59:34 LOG6[37]: OCSP: This update: May 13 18:15:02 2018 GMT 2018.05.14 12:59:34 LOG6[37]: OCSP: Next update: May 20 18:15:02 2018 GMT 2018.05.14 12:59:34 LOG5[37]: OCSP: Certificate accepted 2018.05.14 12:59:34 LOG6[37]: Certificate accepted at depth=1: C=US, O="thawte, Inc.", CN=thawte SSL CA - G2 2018.05.14 12:59:34 LOG7[37]: Verification started at depth=0: C=DE, ST=Rheinland-Pfalz, L=Montabaur, O=1&1 Internet SE, CN=smtp.1and1.es 2018.05.14 12:59:34 LOG7[37]: CERT: Pre-verification succeeded 2018.05.14 12:59:34 LOG6[37]: CERT: Host name "smtp.1and1.es" matched with "smtp.1and1.es" 2018.05.14 12:59:34 LOG5[37]: OCSP: Connecting the AIA responder " http://tj.symcd.com" 2018.05.14 12:59:34 LOG6[37]: s_connect: connecting 23.5.251.27:80 2018.05.14 12:59:34 LOG7[37]: s_connect: s_poll_wait 23.5.251.27:80: waiting 10 seconds 2018.05.14 12:59:35 LOG5[37]: s_connect: connected 23.5.251.27:80 2018.05.14 12:59:35 LOG7[37]: OCSP: Connected tj.symcd.com:80 2018.05.14 12:59:35 LOG7[37]: OCSP: Response received 2018.05.14 12:59:35 LOG6[37]: OCSP: Status: good 2018.05.14 12:59:35 LOG6[37]: OCSP: This update: May 14 01:38:59 2018 GMT 2018.05.14 12:59:35 LOG6[37]: OCSP: Next update: May 21 01:38:59 2018 GMT 2018.05.14 12:59:35 LOG5[37]: OCSP: Certificate accepted 2018.05.14 12:59:35 LOG5[37]: Certificate accepted at depth=0: C=DE, ST=Rheinland-Pfalz, L=Montabaur, O=1&1 Internet SE, CN=smtp.1and1.es 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server certificate A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server key exchange A 2018.05.14 12:59:35 LOG6[37]: Client certificate not requested 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read server done A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write client key exchange A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write change cipher spec A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 write finished A 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 flush data 2018.05.14 12:59:35 LOG7[37]: TLS state (connect): SSLv3 read finished A 2018.05.14 12:59:35 LOG7[37]: 1 client connect(s) requested 2018.05.14 12:59:35 LOG7[37]: 1 client connect(s) succeeded 2018.05.14 12:59:35 LOG7[37]: 0 client renegotiation(s) requested 2018.05.14 12:59:35 LOG7[37]: 0 session reuse(s) 2018.05.14 12:59:35 LOG6[37]: TLS connected: new session negotiated 2018.05.14 12:59:35 LOG7[37]: Peer certificate was cached (5543 bytes) 2018.05.14 12:59:35 LOG6[37]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-GCM-SHA384 (256-bit encryption) 2018.05.14 12:59:35 LOG7[37]: Compression: null, expansion: null 2018.05.14 12:59:53 LOG3[36]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2018.05.14 12:59:53 LOG5[36]: Connection closed: 15 byte(s) sent to TLS, 166 byte(s) sent to socket

I can't find the error.

Thanks in advance for your help.

Best regards,

Alix

---

stunnel-users mailing list stunnel-users@stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users