Hi there, lets see:

When I setup a server for the eMule's web interface and I access with the browser through https, the result is that the web interface never fully loads.

When I setup a server for the web interface and a client connecting to that server and I access with the browser through http and with help of the client, the web interface loads without problems.

Ok, at this point you think... "maybe the browser doesn't understand stunnel server at first instance for some reason... and needs the client to have a good SSL connection".

So, we complicate things.... ;-)

I made the following scenario because, sometimes, you can't use a client in the remote computer (where is not the web interface, if you are lost what with I'm telling).

So, now we setup a server for the web interface, a client that connects to the server and a new server that connects to the client to serve to the remote browser... and... happens the same as the first example, as if it was only one server serving the web interface: it never fully loads. (I know, this scenario was quite weird :-P ).

In case it was the browser I checked max connections, pipelining, etc, (allowing crazy max connection limits) but that didn't help on success :-(

No matter of what web browser I use, they all do the same. They create between 7 to 15 connections with stunnel (sometimes more, others less) and nothing else.

With the help of the client, all is smooth with over 150 connections.

I tried too to create an html file "similar" to the web interface with the same resources (basically loads of images and therefore requests per second) and with my own web server and, in this case, there was no drama at all. The browsers connect to the stunnel server with over 190 connections in an eye blink and without of an stunnel client.

At this point, I'm quite lost :-S

Why doesn't load the web interface connecting directly to the stunnel server but does with the help of a client?

Any ideas?

Probably is the built-in web server of eMule, but it doesn't give problems when there is no stunnel in between or when using an stunnel client to connect to that stunnel server :S

If you use eMule, test it and tell me if it works for you.

Regards.

P.S.: I hope you understood all because, even for me, has been confusing to explain.