Try: * Verifying the openssl version(s) * Verifying the 192.168.1.96:51400 port (nmap, netstat, etc.) * Verifying connection (openssl s_client -connect 192.168.1.96:51400) * Verifying the ciphersuite * Verifying the certificate

...

Is there a configuration item in stunnel to at least tell it to chill out a little and not try reconnecting 1000 times a second?  Not sure.  TIMEOUTclose?

On Sunday, May 24, 2020, 6:00:07 a.m. EDT, stunnel-users-request@stunnel.org <stunnel-users-request@stunnel.org> wrote: Send stunnel-users mailing list submissions to     stunnel-users@stunnel.org To subscribe or unsubscribe via the World Wide Web, visit     https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users or, via email, send a message with subject or body 'help' to     stunnel-users-request@stunnel.org You can reach the person managing the list at     stunnel-users-owner@stunnel.org When replying, please edit your Subject line so it is more specific than "Re: Contents of stunnel-users digest..." Today's Topics:   1. /var/log/syslog is filling up with stunnel errors (digitek)   2. Re: /var/log/syslog is filling up with stunnel errors       (Thomas Ward) ---------------------------------------------------------------------- Message: 1 Date: Sat, 23 May 2020 18:17:49 -0500 From: digitek <digitek@charter.net> To: stunnel-users@stunnel.org Subject: [stunnel-users] /var/log/syslog is filling up with stunnel     errors Message-ID: <434e3153-d94c-bb71-fc51-1716db588290@charter.net> Content-Type: text/plain; charset=windows-1252; format=flowed Hi, I've been running stunnel for years to shuttle my syslogs off to a syslog server. It's performed flawlessly up until a few weeks ago. Recently, rebooting my syslog server results in the clients filling up /var/log/syslog with messages like below[1]. I'm not certain where the issue is. We've gone through some Ubuntu 16.04 > 18.04 upgrades on some hosts, as well as the syslog server. Is there a configuration item in stunnel to at least tell it to chill out a little and not try reconnecting 1000 times a second?  My config from a client is here[2] Last time this happened (few weeks ago) I googled around and found the TIMEOUTconnect parameter to try and get stunnel to at least wait 10 seconds before attempting another connect, but guess it doesn't work that way. Any thoughts? The stunnel client is on Ubuntu 18.04. I'd rather not compile out-of-band for the latest stunnel version unless I must. I"m assuming this is a config issue on my end.  The version I'm stuck with right now is stunnel 5.44 on x86_64-pc-linux-gnu platform Thanks! [1] May 23 17:42:04 shuriken stunnel: LOG5[44922183]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket May 23 17:42:04 shuriken stunnel: LOG5[44922184]: Service [syslog_tunnel] accepted connection from 127.0.0.1:55440 May 23 17:42:04 shuriken stunnel: LOG3[44922184]: s_connect: connect 192.168.1.96:51400: Connection refused (111) May 23 17:42:04 shuriken stunnel: LOG3[44922184]: No more addresses to connect May 23 17:42:04 shuriken stunnel: LOG5[44922184]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket May 23 17:42:04 shuriken stunnel: LOG5[44922185]: Service [syslog_tunnel] accepted connection from 127.0.0.1:55444 May 23 17:42:04 shuriken stunnel: LOG3[44922185]: s_connect: connect 192.168.1.96:51400: Connection refused (111) May 23 17:42:04 shuriken stunnel: LOG3[44922185]: No more addresses to connect [2] client  = yes cert    = /etc/stunnel/shared/stunnel.pem pid      = /var/run/stunnel4/syslog_stunnel.pid [syslog_tunnel] accept  = 127.0.0.1:5140 connect  = 192.168.1.96:51400 TIMEOUTconnect = 10 ------------------------------ Message: 2 Date: Sat, 23 May 2020 20:09:48 -0400 From: Thomas Ward <teward@thomas-ward.net> To: digitek <digitek@charter.net>, stunnel-users@stunnel.org Subject: Re: [stunnel-users] /var/log/syslog is filling up with     stunnel errors Message-ID: <49V0wH16GWz2QGD@mail.syn-ack.link> Content-Type: text/plain; charset="utf-8" This is indicative of the remote server not running on the right ports normally or actively blocking you, given the "Connection Refused" errors.? Verify your system stunnel is on actually can connect to the specified IP and port combo independently of stunnel to start with.Sent from my Sprint Samsung Galaxy Note10+. -------- Original message --------From: digitek <digitek@charter.net> Date: 5/23/20  19:18  (GMT-05:00) To: stunnel-users@stunnel.org Subject: [stunnel-users] /var/log/syslog is filling up with stunnel errors Hi,I've been running stunnel for years to shuttle my syslogs off to a syslog server. It's performed flawlessly up until a few weeks ago. Recently, rebooting my syslog server results in the clients filling up /var/log/syslog with messages like below[1].I'm not certain where the issue is. We've gone through some Ubuntu 16.04 > 18.04 upgrades on some hosts, as well as the syslog server. Is there a configuration item in stunnel to at least tell it to chill out a little and not try reconnecting 1000 times a second?? My config from a client is here[2]Last time this happened (few weeks ago) I googled around and found the TIMEOUTconnect parameter to try and get stunnel to at least wait 10 seconds before attempting another connect, but guess it doesn't work that way.Any thoughts? The stu nnel client is on Ubuntu 18.04. I'd rather not compile out-of-band for the latest stunnel version unless I must. I"m assuming this is a config issue on my end.? The version I'm stuck with right now is stunnel 5.44 on x86_64-pc-linux-gnu platformThanks![1]May 23 17:42:04 shuriken stunnel: LOG5[44922183]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socketMay 23 17:42:04 shuriken stunnel: LOG5[44922184]: Service [syslog_tunnel] accepted connection from 127.0.0.1:55440May 23 17:42:04 shuriken stunnel: LOG3[44922184]: s_connect: connect 192.168.1.96:51400: Connection refused (111)May 23 17:42:04 shuriken stunnel: LOG3[44922184]: No more addresses to connectMay 23 17:42:04 shuriken stunnel: LOG5[44922184]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socketMay 23 17:42:04 shuriken stunnel: LOG5[44922185]: Service [syslog_tunnel] accepted connection from 127.0.0.1:55444May 23 17:42:04 shuriken stunnel: LOG3[44922185]: s_connect: connect 192.168.1.96:51400: Conn ection refused (111)May 23 17:42:04 shuriken stunnel: LOG3[44922185]: No more addresses to connect[2]client?? = yescert???? = /etc/stunnel/shared/stunnel.pempid????? = /var/run/stunnel4/syslog_stunnel.pid[syslog_tunnel]accept?? = 127.0.0.1:5140connect? = 192.168.1.96:51400TIMEOUTconnect = 10_______________________________________________stunnel-users mailing liststunnel-users@stunnel.orghttps://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users