Stunnel stuck at SSL state (accept): before/accept initialization
It anyone knows how to fix Stunnel stuck at SSL state (accept): before/accept initialization??? Here is the log: ----------------------------------------------------------------------------------------------------------- [root@vps1 ~]#stunnel /etc/stunnel/stunnel.conf 2011.04.24 02:25:13 LOG7[32174:3085993680]: Snagged 64 random bytes from /root/.rnd 2011.04.24 02:25:13 LOG7[32174:3085993680]: Wrote 1024 new random bytes to /root/.rnd 2011.04.24 02:25:13 LOG7[32174:3085993680]: RAND_status claims sufficient entropy for the PRNG 2011.04.24 02:25:13 LOG6[32174:3085993680]: PRNG seeded successfully 2011.04.24 02:25:13 LOG7[32174:3085993680]: Certificate: /etc/stunnel/stunnel.pem 2011.04.24 02:25:13 LOG7[32174:3085993680]: Key file: /etc/stunnel/stunnel.pem 2011.04.24 02:25:13 LOG7[32174:3085993680]: Verify directory set to /etc/stunnel/CA 2011.04.24 02:25:13 LOG7[32174:3085993680]: CRL directory set to /etc/stunnel/CRL 2011.04.24 02:25:13 LOG7[32174:3085993680]: SSL context initialized for service 3proxy 2011.04.24 02:25:13 LOG5[32174:3085993680]: stunnel 4.15 on i686-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 2011.04.24 02:25:13 LOG5[32174:3085993680]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2011.04.24 02:25:13 LOG6[32174:3085993680]: file ulimit = 1024 (can be changed with 'ulimit -n') 2011.04.24 02:25:13 LOG6[32174:3085993680]: poll() used - no FD_SETSIZE limit for file descriptors 2011.04.24 02:25:13 LOG5[32174:3085993680]: 500 clients allowed 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 3 in non-blocking mode 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 4 in non-blocking mode 2011.04.24 02:25:13 LOG7[32174:3085993680]: FD 5 in non-blocking mode 2011.04.24 02:25:13 LOG7[32174:3085993680]: SO_REUSEADDR option set on accept socket 2011.04.24 02:25:13 LOG7[32174:3085993680]: 3proxy bound to 0.0.0.0:30001 2011.04.24 02:25:13 LOG7[32174:3085993680]: Created pid file /var/run/stunnel.pid 2011.04.24 02:25:20 LOG7[32174:3085993680]: 3proxy accepted FD=6 from xx.xxx.xxx.xx:41165 2011.04.24 02:25:20 LOG7[32174:3085990800]: 3proxy started 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 6 in non-blocking mode 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 7 in non-blocking mode 2011.04.24 02:25:20 LOG7[32174:3085990800]: FD 8 in non-blocking mode 2011.04.24 02:25:20 LOG7[32174:3085993680]: Cleaning up the signal pipe 2011.04.24 02:25:20 LOG6[32174:3085993680]: Child process 32176 finished with code 0 2011.04.24 02:25:20 LOG7[32174:3085990800]: Connection from xx.xxx.xxx.xx:41165 permitted by libwrap 2011.04.24 02:25:20 LOG5[32174:3085990800]: 3proxy connected from xx.xxx.xxx.xx:41165 2011.04.24 02:25:20 LOG7[32174:3085990800]: SSL state (accept): before/accept initialization <-----------------------Stuck here forever!!! 2011.04.24 02:25:22 LOG3[32174:3085990800]: SSL_accept: Peer suddenly disconnected 2011.04.24 02:25:22 LOG5[32174:3085990800]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2011.04.24 02:25:22 LOG7[32174:3085990800]: 3proxy finished (0 left) 2011.04.24 02:25:25 LOG3[32174:3085993680]: Received signal 2; terminating 2011.04.24 02:25:25 LOG7[32174:3085993680]: removing pid file /var/run/stunnel.pid [root@vps1 ~]# ----------------------------------------------------------------------------------------------------------- stunnel.conf: cert = /etc/stunnel/stunnel.pem key = /etc/stunnel/stunnel.pem CApath = /etc/stunnel/CA CRLpath = /etc/stunnel/CRL debug = 7 foreground = yes verify = 1 # [3proxy] accept = 30001 connect = 127.0.0.1:33135 ----------------------------------------------------------------------------------------------------------- I am hosting with CentOS 5.5, and installed Stunnel via yum. Planning to use it with 3Proxy. However I experience the problem above, can someone please help with that? Thank you very much! Mr. Jack
If you ruled out a configuration error, You should try with a more recent version of stunnel. You can recompile the SRPM (4.29) from redhat 6 (or scientific linux 6) and it works fine under CentOS 5. I can provide binaries if needed. -----Original Message----- From: Jack Liu <jackliu92@hotmail.com> Sender: stunnel-users-bounces@stunnel.org Date: Sun, 24 Apr 2011 02:30:24 To: <stunnel-users@stunnel.org> Subject: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization _______________________________________________ stunnel-users mailing list stunnel-users@stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users
Yes sure, please provide the binary. Thank you very much! One additional information, running socket5 on 3Proxy. Mr. Jack
Subject: Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/acceptinitialization To: jackliu92@hotmail.com; stunnel-users@stunnel.org From: josealf@rocketmail.com Date: Sun, 24 Apr 2011 11:49:05 +0000
If you ruled out a configuration error, You should try with a more recent version of stunnel. You can recompile the SRPM (4.29) from redhat 6 (or scientific linux 6) and it works fine under CentOS 5. I can provide binaries if needed.
-----Original Message----- From: Jack Liu <jackliu92@hotmail.com> Sender: stunnel-users-bounces@stunnel.org Date: Sun, 24 Apr 2011 02:30:24 To: <stunnel-users@stunnel.org> Subject: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization
_______________________________________________ stunnel-users mailing list stunnel-users@stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users
Mr Jack, I am sending the binaries off-list. I am attaching both 4.29 and 4.35 versions. regards, Jose ________________________________ From: Jack Liu <jackliu92@hotmail.com> To: josealf@rocketmail.com; stunnel-users@stunnel.org Sent: Sun, April 24, 2011 1:08:44 PM Subject: RE: [stunnel-users] Stunnel stuck at SSL state (accept): before/acceptinitialization Yes sure, please provide the binary. Thank you very much! One additional information, running socket5 on 3Proxy. Mr. Jack
Subject: Re: [stunnel-users] Stunnel stuck at SSL state (accept): before/acceptinitialization To: jackliu92@hotmail.com; stunnel-users@stunnel.org From: josealf@rocketmail.com Date: Sun, 24 Apr 2011 11:49:05 +0000
If you ruled out a configuration error, You should try with a more recent version of stunnel. You can recompile the SRPM (4.29) from redhat 6 (or scientific linux 6) and it works fine under CentOS 5. I can provide binaries if needed.
-----Original Message----- From: Jack Liu <jackliu92@hotmail.com> Sender: stunnel-users-bounces@stunnel.org Date: Sun, 24 Apr 2011 02:30:24 To: <stunnel-users@stunnel.org> Subject: [stunnel-users] Stunnel stuck at SSL state (accept): before/accept initialization
_______________________________________________ stunnel-users mailing list stunnel-users@stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users
participants (3)
-
Jack Liu -
Jose Alf. -
josealf＠rocketmail.com