Hi,
I've setup a stunnel install to handle several website SSL part of the HTTP (then redirected to HAProxy LoadBalancer).
I can successfully start one site, but if I add another website (so another stunnel conf file in /etc/stunnel) then the first is said to be already running while it's not and the second starts for real.
thomas@ns0:/var/log/stunnel4$ sudo service stunnel4 start Starting SSL tunnels: [Started: /etc/stunnel/base.conf] [Started: /etc/stunnel/extranet.onesite.com.conf] *[Already running: /etc/stunnel/mansonthomas.com.conf] stunnel.*
(mansonthomas.com was my first try before implementing a client website)
Also, in /var/log/stunnel.log I've only the logs for base.conf, not for the two other one. What should I do to have the logs? I've tryed to add debug=7 at the beginning of the two conf file, but nothing.
After some times, the extranet site https stops working...
I was off in holidays for the last two weeks, so I didn't have the time to really dig into this...
what would be the first steps to debug this issues ?
Regards, Thomas.
2012.03.29 15:31:41 LOG5[8181:140471188047648]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:31:41 LOG7[8181:140471188047648]: PRNG seeded successfully 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG6[8181:140471188047648]: DH initialized with 2048 bit key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: ECDH initialized 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Private key loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: SSL context initialized for service https-mainsite.com 2012.03.29 15:31:41 LOG5[8181:140471188047648]: Configuration successful 2012.03.29 15:31:41 LOG5[8181:140471188047648]: No limit detected for the number of clients 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.combound to 8.19.1.2:443 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.comopened FD=11 2012.03.29 15:31:41 LOG7[8187:140471188047648]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:31:41 LOG5[8187:140471188047648]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:31:41 LOG5[8187:140471188047648]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2012.03.29 15:31:49 LOG7[8187:140471188047648]: Dispatching signals from the signal pipe 2012.03.29 15:31:49 LOG5[8187:140471188047648]: Received signal 15; terminating 2012.03.29 15:31:49 LOG7[8187:140471188047648]: removing pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:32:38 LOG7[8280:140481745549088]: PRNG seeded successfully 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG6[8280:140481745549088]: DH initialized with 2048 bit key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: ECDH initialized 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Private key loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: SSL context initialized for service https-mainsite.com 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Configuration successful 2012.03.29 15:32:38 LOG5[8280:140481745549088]: No limit detected for the number of clients 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.combound to 8.19.1.2:443 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.comopened FD=11 2012.03.29 15:32:38 LOG7[8286:140481745549088]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8286:140481745549088]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:32:38 LOG5[8286:140481745549088]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP
Here is the logs when it doesn't works (there's a stunnel.log but empty)
The symptoms are the following :
* stunnel still running in memory
1 8426 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8427 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8428 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8429 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8430 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8431 8431 8431 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8440 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8441 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranetonesite.com.conf 1 8442 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8443 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8444 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8445 8445 8445 ? -1 Ss 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf
The browser gets the following error (translated from french) :
the connection with the server has be reset while loading the page (on firefox)
See the logs attached.
Connecting on 127.0.0.1:82 is working (HAProxy running, and webservers are up)
So I quite don't understand what's going on.
2012.03.29 17:29:11 LOG3[8431:140689358976768]: SSL_accept: Peer suddenly
disconnected
this is quite strange...
Any idea ?
Regards, Thomas.
On Thu, Mar 29, 2012 at 15:39, Thomas Manson dev.mansonthomas@gmail.comwrote:
Hi,
I've setup a stunnel install to handle several website SSL part of the HTTP (then redirected to HAProxy LoadBalancer).
I can successfully start one site, but if I add another website (so another stunnel conf file in /etc/stunnel) then the first is said to be already running while it's not and the second starts for real.
thomas@ns0:/var/log/stunnel4$ sudo service stunnel4 start Starting SSL tunnels: [Started: /etc/stunnel/base.conf] [Started: /etc/stunnel/extranet.onesite.com.conf] *[Already running: /etc/stunnel/mansonthomas.com.conf] stunnel.*
(mansonthomas.com was my first try before implementing a client website)
Also, in /var/log/stunnel.log I've only the logs for base.conf, not for the two other one. What should I do to have the logs? I've tryed to add debug=7 at the beginning of the two conf file, but nothing.
After some times, the extranet site https stops working...
I was off in holidays for the last two weeks, so I didn't have the time to really dig into this...
what would be the first steps to debug this issues ?
Regards, Thomas.
2012.03.29 15:31:41 LOG5[8181:140471188047648]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:31:41 LOG7[8181:140471188047648]: PRNG seeded successfully 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG6[8181:140471188047648]: DH initialized with 2048 bit key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: ECDH initialized 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Private key loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: SSL context initialized for service https-mainsite.com 2012.03.29 15:31:41 LOG5[8181:140471188047648]: Configuration successful 2012.03.29 15:31:41 LOG5[8181:140471188047648]: No limit detected for the number of clients 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.combound to 8.19.1.2:443 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.comopened FD=11 2012.03.29 15:31:41 LOG7[8187:140471188047648]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:31:41 LOG5[8187:140471188047648]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:31:41 LOG5[8187:140471188047648]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2012.03.29 15:31:49 LOG7[8187:140471188047648]: Dispatching signals from the signal pipe 2012.03.29 15:31:49 LOG5[8187:140471188047648]: Received signal 15; terminating 2012.03.29 15:31:49 LOG7[8187:140471188047648]: removing pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:32:38 LOG7[8280:140481745549088]: PRNG seeded successfully 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG6[8280:140481745549088]: DH initialized with 2048 bit key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: ECDH initialized 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Private key loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: SSL context initialized for service https-mainsite.com 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Configuration successful 2012.03.29 15:32:38 LOG5[8280:140481745549088]: No limit detected for the number of clients 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.combound to 8.19.1.2:443 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.comopened FD=11 2012.03.29 15:32:38 LOG7[8286:140481745549088]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8286:140481745549088]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:32:38 LOG5[8286:140481745549088]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP
Please... help... ;)
On Fri, Mar 30, 2012 at 12:48, Thomas Manson dev.mansonthomas@gmail.comwrote:
Here is the logs when it doesn't works (there's a stunnel.log but empty)
The symptoms are the following :
stunnel still running in memory
1 8426 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4
/etc/stunnel/base.conf 1 8427 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8428 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8429 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8430 8414 18168 pts/0 10698 S 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8431 8431 8431 ? -1 Ss 109 0:00 /usr/bin/stunnel4 /etc/stunnel/base.conf 1 8440 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8441 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranetonesite.com.conf 1 8442 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8443 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8444 8414 18168 pts/0 10698 S 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf 1 8445 8445 8445 ? -1 Ss 0 0:00 /usr/bin/stunnel4 /etc/stunnel/extranet.onesite.com.conf
The browser gets the following error (translated from french) :
the connection with the server has be reset while loading the page (on firefox)
See the logs attached.
Connecting on 127.0.0.1:82 is working (HAProxy running, and webservers are up)
So I quite don't understand what's going on.
2012.03.29 17:29:11 LOG3[8431:140689358976768]: SSL_accept: Peer
suddenly disconnected
this is quite strange...
Any idea ?
Regards, Thomas.
On Thu, Mar 29, 2012 at 15:39, Thomas Manson dev.mansonthomas@gmail.comwrote:
Hi,
I've setup a stunnel install to handle several website SSL part of the HTTP (then redirected to HAProxy LoadBalancer).
I can successfully start one site, but if I add another website (so another stunnel conf file in /etc/stunnel) then the first is said to be already running while it's not and the second starts for real.
thomas@ns0:/var/log/stunnel4$ sudo service stunnel4 start Starting SSL tunnels: [Started: /etc/stunnel/base.conf] [Started: /etc/stunnel/extranet.onesite.com.conf] *[Already running: /etc/stunnel/mansonthomas.com.conf] stunnel.*
(mansonthomas.com was my first try before implementing a client website)
Also, in /var/log/stunnel.log I've only the logs for base.conf, not for the two other one. What should I do to have the logs? I've tryed to add debug=7 at the beginning of the two conf file, but nothing.
After some times, the extranet site https stops working...
I was off in holidays for the last two weeks, so I didn't have the time to really dig into this...
what would be the first steps to debug this issues ?
Regards, Thomas.
2012.03.29 15:31:41 LOG5[8181:140471188047648]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:31:41 LOG7[8181:140471188047648]: PRNG seeded successfully 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG6[8181:140471188047648]: DH initialized with 2048 bit key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: ECDH initialized 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Certificate loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Private key loaded 2012.03.29 15:31:41 LOG7[8181:140471188047648]: SSL context initialized for service https-mainsite.com 2012.03.29 15:31:41 LOG5[8181:140471188047648]: Configuration successful 2012.03.29 15:31:41 LOG5[8181:140471188047648]: No limit detected for the number of clients 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.com bound to 8.19.1.2:443 2012.03.29 15:31:41 LOG7[8181:140471188047648]: Service https-mainsite.com opened FD=11 2012.03.29 15:31:41 LOG7[8187:140471188047648]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:31:41 LOG5[8187:140471188047648]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:31:41 LOG5[8187:140471188047648]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2012.03.29 15:31:49 LOG7[8187:140471188047648]: Dispatching signals from the signal pipe 2012.03.29 15:31:49 LOG5[8187:140471188047648]: Received signal 15; terminating 2012.03.29 15:31:49 LOG7[8187:140471188047648]: removing pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Reading configuration from file /etc/stunnel/base.conf 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Snagged 64 random bytes from /dev/urandom 2012.03.29 15:32:38 LOG7[8280:140481745549088]: PRNG seeded successfully 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Using DH parameters from /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG6[8280:140481745549088]: DH initialized with 2048 bit key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: ECDH initialized 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate: /etc/stunnel/sites/mainsite.com/mainsite.com.crt 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Certificate loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Key file: /etc/stunnel/sites/mainsite.com/mainsite.com.key 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Private key loaded 2012.03.29 15:32:38 LOG7[8280:140481745549088]: SSL context initialized for service https-mainsite.com 2012.03.29 15:32:38 LOG5[8280:140481745549088]: Configuration successful 2012.03.29 15:32:38 LOG5[8280:140481745549088]: No limit detected for the number of clients 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=3 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=4 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=5 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=6 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=7 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: libwrap_init: FD=8 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=9 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: signal_pipe: FD=10 allocated (blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: accept socket: FD=11 allocated (non-blocking mode) 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Option SO_REUSEADDR set on accept socket 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.com bound to 8.19.1.2:443 2012.03.29 15:32:38 LOG7[8280:140481745549088]: Service https-mainsite.com opened FD=11 2012.03.29 15:32:38 LOG7[8286:140481745549088]: Created pid file /var/run/stunnel4/stunnel4.pid 2012.03.29 15:32:38 LOG5[8286:140481745549088]: stunnel 4.35 on x86_64-pc-linux-gnu with OpenSSL 1.0.0e 6 Sep 2011 2012.03.29 15:32:38 LOG5[8286:140481745549088]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP
-
Thomas Manson