Help please. - stunnel-users

2 Dec 2019


      Hi
I need to  enable a tunnel_out  for UTL_HTTP from http:// to https://
I installed stunnel 5.34 win32 in a windows 2008 server.
I am including my stunnel.conf y log file (debug=7)
As you can see in the log file, I get this error:
2019.12.01 14:08:12 LOG3[7]: SSL_accept: 1407609C: error:1407609C:SSL routines:SSL23_GET_CLIENT_HELLO:http request
Could you help me please?
MY stunnel.conf---
debug = 7
output = stunnel.log
[https]
accept  = 127.0.0.1:80
connect = sub.dominio.com:443
cert = stunnel.pem
TIMEOUTclose = 0
This version has openssl[cid:b6de9085-07c4-43d0-b772-bb9beb37c2ac]
MY LOG---
2019.12.01 14:00:37 LOG7[cron]: Cron thread initialized
2019.12.01 14:00:37 LOG7[main]: No limit detected for the number of clients
2019.12.01 14:00:37 LOG5[main]: stunnel 5.34 on x86-pc-msvc-1500 platform
2019.12.01 14:00:37 LOG5[main]: Compiled/running with OpenSSL 1.0.2h-fips  3 May 2016
2019.12.01 14:00:37 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI
2019.12.01 14:00:37 LOG7[main]: errno: (*_errno())
2019.12.01 14:00:37 LOG7[ui]: GUI message loop initialized
2019.12.01 14:00:37 LOG5[main]: Reading configuration from file stunnel.conf
2019.12.01 14:00:37 LOG5[main]: UTF-8 byte order mark detected
2019.12.01 14:00:37 LOG5[main]: FIPS mode disabled
2019.12.01 14:00:37 LOG7[main]: Compression disabled
2019.12.01 14:00:37 LOG7[main]: Snagged 64 random bytes from C:/.rnd
2019.12.01 14:00:37 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd
2019.12.01 14:00:37 LOG7[main]: PRNG seeded successfully
2019.12.01 14:00:37 LOG6[main]: Initializing service [https]
2019.12.01 14:00:38 LOG6[main]: Loading certificate from file: stunnel.pem
2019.12.01 14:00:38 LOG6[main]: Certificate loaded from file: stunnel.pem
2019.12.01 14:00:38 LOG6[main]: Loading private key from file: stunnel.pem
2019.12.01 14:00:38 LOG6[main]: Private key loaded from file: stunnel.pem
2019.12.01 14:00:38 LOG7[main]: Private key check succeeded
2019.12.01 14:00:38 LOG7[main]: DH initialization
2019.12.01 14:00:38 LOG7[main]: Could not load DH parameters from stunnel.pem
2019.12.01 14:00:38 LOG6[main]: Using dynamic DH parameters
2019.12.01 14:00:38 LOG7[main]: ECDH initialization
2019.12.01 14:00:38 LOG7[main]: ECDH initialized with curve prime256v1
2019.12.01 14:00:38 LOG7[main]: SSL options: 0x03004004 (+0x03004000, -0x00000000)
2019.12.01 14:00:38 LOG5[main]: Configuration successful
2019.12.01 14:00:38 LOG7[main]: Listening file descriptor created (FD=352)
2019.12.01 14:00:38 LOG7[main]: Service [https] (FD=352) bound to 127.0.0.1:80
2019.12.01 14:00:59 LOG7[main]: Found 1 ready file descriptor(s)
2019.12.01 14:00:59 LOG7[main]: FD=260 ifds=r-x ofds=r--
2019.12.01 14:00:59 LOG7[main]: Dispatching signals from the signal pipe
2019.12.01 14:00:59 LOG7[main]: Processing SIGNAL_RELOAD_CONFIG
2019.12.01 14:00:59 LOG5[main]: Reading configuration from file stunnel.conf
2019.12.01 14:00:59 LOG5[main]: UTF-8 byte order mark detected
2019.12.01 14:00:59 LOG5[main]: FIPS mode disabled
2019.12.01 14:00:59 LOG7[main]: Compression disabled
2019.12.01 14:00:59 LOG7[main]: Snagged 64 random bytes from C:/.rnd
2019.12.01 14:00:59 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd
2019.12.01 14:00:59 LOG7[main]: PRNG seeded successfully
2019.12.01 14:00:59 LOG6[main]: Initializing service [https]
2019.12.01 14:00:59 LOG6[main]: Loading certificate from file: stunnel.pem
2019.12.01 14:00:59 LOG6[main]: Certificate loaded from file: stunnel.pem
2019.12.01 14:00:59 LOG6[main]: Loading private key from file: stunnel.pem
2019.12.01 14:00:59 LOG6[main]: Private key loaded from file: stunnel.pem
2019.12.01 14:00:59 LOG7[main]: Private key check succeeded
2019.12.01 14:00:59 LOG7[main]: DH initialization
2019.12.01 14:00:59 LOG7[main]: Could not load DH parameters from stunnel.pem
2019.12.01 14:00:59 LOG6[main]: Using dynamic DH parameters
2019.12.01 14:00:59 LOG7[main]: ECDH initialization
2019.12.01 14:00:59 LOG7[main]: ECDH initialized with curve prime256v1
2019.12.01 14:00:59 LOG7[main]: SSL options: 0x03004004 (+0x03004000, -0x00000000)
2019.12.01 14:00:59 LOG5[main]: Configuration successful
2019.12.01 14:00:59 LOG7[main]: Closing service [https]
2019.12.01 14:00:59 LOG7[main]: Service [https] closed (FD=352)
2019.12.01 14:00:59 LOG7[main]: Service [https] closed
2019.12.01 14:00:59 LOG7[main]: Listening file descriptor created (FD=352)
2019.12.01 14:00:59 LOG7[main]: Service [https] (FD=352) bound to 127.0.0.1:80
2019.12.01 14:00:59 LOG7[main]: Signal pipe is empty
2019.12.01 14:01:37 LOG6[cron]: Executing cron jobs
2019.12.01 14:01:37 LOG5[cron]: Updating DH parameters
2019.12.01 14:01:37 LOG7[main]: Found 1 ready file descriptor(s)
2019.12.01 14:01:37 LOG7[main]: FD=260 ifds=r-x ofds=---
2019.12.01 14:01:37 LOG7[main]: Service [https] accepted (FD=420) from 127.0.0.1:56581
2019.12.01 14:01:37 LOG7[main]: Creating a new thread
2019.12.01 14:01:37 LOG7[main]: New thread created
2019.12.01 14:01:37 LOG7[0]: Service [https] started
2019.12.01 14:01:37 LOG5[0]: Service [https] accepted connection from 127.0.0.1:56581
2019.12.01 14:01:37 LOG7[0]: SSL state (accept): before/accept initialization
2019.12.01 14:01:37 LOG7[main]: Found 1 ready file descriptor(s)
2019.12.01 14:01:37 LOG7[main]: FD=260 ifds=r-x ofds=---
2019.12.01 14:01:37 LOG7[main]: Service [https] accepted (FD=440) from 127.0.0.1:56582
2019.12.01 14:01:37 LOG7[main]: Creating a new thread
2019.12.01 14:01:37 LOG7[main]: New thread created
2019.12.01 14:01:37 LOG7[1]: Service [https] started
2019.12.01 14:01:37 LOG5[1]: Service [https] accepted connection from 127.0.0.1:56582
2019.12.01 14:01:37 LOG7[1]: SSL state (accept): before/accept initialization
2019.12.01 14:01:37 LOG3[0]: SSL_accept: 1407609C: error:1407609C:SSL routines:SSL23_GET_CLIENT_HELLO:http request
2019.12.01 14:01:37 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2019.12.01 14:01:37 LOG7[0]: Local descriptor (FD=420) closed
2019.12.01 14:01:37 LOG7[0]: Service [https] finished (1 left)
2019.12.01 14:01:37 LOG3[1]: SSL_accept: 1407609C: error:1407609C:SSL routines:SSL23_GET_CLIENT_HELLO:http request
2019.12.01 14:01:37 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2019.12.01 14:01:37 LOG7[1]: Local descriptor (FD=440) closed
2019.12.01 14:01:37 LOG7[1]: Service [https] finished (0 left)
2019.12.01 14:01:37 LOG7[main]: Found 1 ready file descriptor(s)
2019.12.01 14:01:37 LOG7[main]: FD=260 ifds=r-x ofds=---
2019.12.01 14:01:37 LOG7[main]: Service [https] accepted (FD=448) from 127.0.0.1:56583
2019.12.01 14:01:37 LOG7[main]: Creating a new thread
2019.12.01 14:01:37 LOG7[main]: New thread created
2019.12.01 14:01:37 LOG7[2]: Service [https] started
2019.12.01 14:01:37 LOG5[2]: Service [https] accepted connection from 127.0.0.1:56583
2019.12.01 14:01:37 LOG7[2]: SSL state (accept): before/accept initialization
2019.12.01 14:01:37 LOG3[2]: SSL_accept: 1407609C: error:1407609C:SSL routines:SSL23_GET_CLIENT_HELLO:http request
2019.12.01 14:01:37 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2019.12.01 14:01:37 LOG7[2]: Local descriptor (FD=448) closed
2019.12.01 14:01:37 LOG7[2]: Service [https] finished (0 left)
2019.12.01 14:01:37 LOG7[main]: Found 1 ready file descriptor(s)
2019.12.01 14:01:37 LOG7[main]: FD=260 ifds=r-x ofds=---
2019.12.01 14:01:37 LOG7[main]: Service [https] accepted (FD=452) from 127.0.0.1:56584
2019.12.01 14:01:37 LOG7[main]: Creating a new thread
2019.12.01 14:01:37 LOG7[main]: New thread created
2019.12.01 14:01:37 LOG7[3]: Service [https] started
2019.12.01 14:01:37 LOG5[3]: Service [https] accepted connection from 127.0.0.1:56584
2019.12.01 14:01:37 LOG7[3]: SSL state (accept): before/accept initialization
2019.12.01 14:01:37 LOG3[3]: SSL_accept: 1407609C: error:1407609C:SSL routines:SSL23_GET_CLIENT_HELLO:http request
2019.12.01 14:01:37 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2019.12.01 14:01:37 LOG7[3]: Local descriptor (FD=452) closed
2019.12.01 14:01:37 LOG7[3]: Service [https] finished (0 left)
Thanks in advance.