Hi, I successfully cross compiled the Stunnel version 4.34 with OpenSSL version 1.0.0a for arm-linux.i want to use this stunnel with my own application which will communicate with outer world through LAN or GPRS.currently i am testing stunnel with telnet application.Its working fine.I am able to telnet to arm board through SSL enabled telnet terminal software.Now i want restrict the access.so i used the /etc/hosts/allow and /etc/hosts.deny files with my chrroot directory as "/".but stunnel is not at all cared about libwrap service.its not checking those files.if i give libwrap=yes in stunnel.conf file its says "specified option name is not valid here".i compiled stunnel with the option --enable-libwrap and gave the libwrap lib also through LDFLAGS.here with i attached my stunnel version information file, stunnel .conf file also.i think its due to configuration???still i don`t know what to do???so please guys help me out.
Thanks & Regards S.Thiyagarajan.
Mohan,
Did you read Section "Running stunnel with TCP wrappers" in Stunnel FAQ? http://www.stunnel.org/faq/run.html#ToC5
AFAIK, there is no libwrap=yes directive. You enable libwrap for your service in /etc/host.allow file. In this case it should be something like
telnets: 192.168.1.1 192.168.1.5
Regards
________________________________ From: mohan raj eshmoh@gmail.com To: stunnel-users@mirt.net Sent: Fri, October 29, 2010 5:40:44 AM Subject: [stunnel-users] Reg:libwrap is not working with stunnel 4.34
Hi, I successfully cross compiled the Stunnel version 4.34 with OpenSSL version 1.0.0a for arm-linux.i want to use this stunnel with my own application which will communicate with outer world through LAN or GPRS.currently i am testing stunnel with telnet application.Its working fine.I am able to telnet to arm board through SSL enabled telnet terminal software.Now i want restrict the access.so i used the /etc/hosts/allow and /etc/hosts.deny files with my chrroot directory as "/".but stunnel is not at all cared about libwrap service.its not checking those files.if i give libwrap=yes in stunnel.conf file its says "specified option name is not valid here".i compiled stunnel with the option --enable-libwrap and gave the libwrap lib also through LDFLAGS.here with i attached my stunnel version information file, stunnel .conf file also.i think its due to configuration???still i don`t know what to do???so please guys help me out.
Thanks & Regards S.Thiyagarajan.
Jose Alf. wrote:
AFAIK, there is no libwrap=yes directive.
Did you consider Reading The Fine Manual page? http://stunnel.mirt.net/static/stunnel.html The option was introduced in version 4.32.
Mike
Michal,
Did you consider Reading The Fine Manual page? http://stunnel.mirt.net/static/stunnel.html The option was introduced in version 4.32.
Will do. Point taken :) I still run 4.26 in my Unix servers. And it looks like your site has been added to one of the categories we block, because the firewall don't le me go there.
Jose.
Hi Jose Alf, Thanks for your reply,anyway i found out what is wrong....actually i don`t have the libwrap library for my arm-linux.And stunnel needs tcp wrappers header files also.so i downloaded the tcp wrapper and cross compiled it for my arm-linux.and gave the header file location with -CPPFLAGS compiler flags.after this stunnel successfully checking the /etc/hosts.allow and /etc/hosts.deny file for host authorization.thanks for your kind reply.
On 11/9/10, Jose Alf. josealf@rocketmail.com wrote:
Mohan,
Did you read Section "Running stunnel with TCP wrappers" in Stunnel FAQ? http://www.stunnel.org/faq/run.html#ToC5
AFAIK, there is no libwrap=yes directive. You enable libwrap for your service in /etc/host.allow file. In this case it should be something like
telnets: 192.168.1.1 192.168.1.5
Regards
From: mohan raj eshmoh@gmail.com To: stunnel-users@mirt.net Sent: Fri, October 29, 2010 5:40:44 AM Subject: [stunnel-users] Reg:libwrap is not working with stunnel 4.34
Hi, I successfully cross compiled the Stunnel version 4.34 with OpenSSL version 1.0.0a for arm-linux.i want to use this stunnel with my own application which will communicate with outer world through LAN or GPRS.currently i am testing stunnel with telnet application.Its working fine.I am able to telnet to arm board through SSL enabled telnet terminal software.Now i want restrict the access.so i used the /etc/hosts/allow and /etc/hosts.deny files with my chrroot directory as "/".but stunnel is not at all cared about libwrap service.its not checking those files.if i give libwrap=yes in stunnel.conf file its says "specified option name is not valid here".i compiled stunnel with the option --enable-libwrap and gave the libwrap lib also through LDFLAGS.here with i attached my stunnel version information file, stunnel .conf file also.i think its due to configuration???still i don`t know what to do???so please guys help me out.
Thanks & Regards S.Thiyagarajan.
-
Jose Alf. -
Michal Trojnara -
mohan raj