Is it possible to run one instance of stunnel and have it verify certain ports against different certificates?

For instance:

[listen1 5003] accept = 5003 connect = 10.61.0.132:7300

[listen2 5008] accept = 5008 connect = 10.61.0.132:7300

Would it be possible to have listen2 validate on a seperate certificate, or, will I need to run a second instance of stunnel on my box and have it point to the different certificate? Basically, I want to know if I can setup a different certificate on a per-port basis. I don't see any options in the definition of the listen port that I can specify a different CERT, only the default CERT option at the top of the config file.

Version: stunnel-4.04

Options cert = /usr/local/conf/ssl.pem chroot = /usr/local/stunnel-4.04/var/run/stunnel/ pid = /stunnel.pid setuid = www setgid = webgroup options = NO_SSLv2 ciphers = DES-CBC3-SHA:IDEA-CBC-SHA:RC4-SHA:RC4-MD5:AES256-SHA:AES128-SHA

uname -a Linux ssl 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown

gcc -v Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)

openssl version OpenSSL 0.9.6b [engine] 9 Jul 2001

This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information of Transaction Network Services. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.