[stunnel-users] stunnel on HP-UX
Stephen Tanner
stanner at leeclerk.org
Fri Jun 10 16:04:29 CEST 2005
Please disregard, I have located the issue.
-----Original Message-----
From: stunnel-users-bounces at mirt.net
[mailto:stunnel-users-bounces at mirt.net] On Behalf Of Stephen Tanner
Sent: Friday, June 10, 2005 9:50 AM
To: stunnel-users at mirt.net
Subject: RE: [stunnel-users] stunnel on HP-UX
This is what I am getting from stunnel when it starts:
2005.06.09 16:14:36 LOG5[1409:1]: stunnel 4.08 on hppa2.0w-hp-hpux11.11
PTHREAD+POLL+IPv4 with OpenSSL 0.9.7e 25 Oct 2004
2005.06.09 16:14:37 LOG4[1409:1]: PRNG may not have been seeded with
enough random bytes
2005.06.09 16:14:37 LOG5[1409:1]: 27 clients allowed
2005.06.09 16:14:37 LOG5[1410:2]: 5140 connected from 127.0.0.1:49153
2005.06.09 16:14:37 LOG3[1410:2]: SSL_connect: Peer suddenly
disconnected
2005.06.09 16:14:47 LOG5[1410:3]: 5140 connected from 127.0.0.1:49156
2005.06.09 16:14:47 LOG3[1410:3]: SSL_connect: Peer suddenly
disconnected
If I restart stunnel it establishes the connection fine, and does not
receive the PRNG error. What can I do to generate enough random bytes
to get this running properly, without starting stunnel later in the boot
process?
-----Original Message-----
From: Stephen Tanner
Sent: Tuesday, June 07, 2005 8:36 AM
To: 'Jan Meijer'
Subject: RE: [stunnel-users] stunnel on HP-UX
Negative, the private key is not protected with a passphrase. If I use
the startup script to start stunnel and syslog-ng manually, everything
works. But on boot stunnel does not seem to properly establish a
connection, and I must stop it and restart it to resolve the issue.
Stephen
-----Original Message-----
From: Jan Meijer [mailto:jan.meijer at surfnet.nl]
Sent: Tuesday, June 07, 2005 3:08 AM
To: Stephen Tanner
Cc: stunnel-users at mirt.net
Subject: Re: [stunnel-users] stunnel on HP-UX
On Tue, 31 May 2005, Stephen Tanner wrote:
> I'm running stunnel on a HP-UX 11.11 system so that I can securely
> transfer logs with syslog-ng. I have stunnel and syslog-ng both
> starting in rc2.d at S537. Every time I have rebooted the server I
get
> a broken pipe as if stunnel is having an issue establishing a tunnel,
> and I am forced to restart stunnel and syslog-ng. Are there any
> specific daemons that need to be running before stunnel starts? I'm
> trying to avoid having this start too late, so that I don't miss logs
on
> some daemons.
There are no specific daemons that need to run. Network is practical
for
DNS resolving if that's needed. To rule out the obvious: you would not
have protected your stunnel private key with a passphrase would you?
Jan
--
http://www.surfnet.nl/organisatie/jame
_______________________________________________
stunnel-users mailing list
stunnel-users at mirt.net
http://stunnel.mirt.net/mailman/listinfo/stunnel-users
_______________________________________________
stunnel-users mailing list
stunnel-users at mirt.net
http://stunnel.mirt.net/mailman/listinfo/stunnel-users
More information about the stunnel-users
mailing list