[stunnel-users] Stunnel.log file not got created

[Carter Browne]

Ankur,

If you post the sections of the log messages from both sides about the
failure, someone on the group should be able to help you with your problem.

Carter

Carter Browne
CBCS
cbrowne at cbcs-usa.com
781-721-2890


On 3/11/2010 8:56 AM, ankur.agarwal at wipro.com wrote:
> Hi carter,
>          thanks for the reply but this thing I already know...i have
> changed the file location also...the problem is we are having two client
> server setups in which we have to implement the secure connection...the
> thing is on one setup everything is working fine but with the other
> setup issue is coming in TLS handshak itself...and both the setups are
> having same configuration as well as software...and same environment
> also...we can not also say that it is setup issue....i just want to know
> the cases in which if tls handshake is not throing a alert message of
> warning/fatal....then why this server hello message is not seen...is
> stunnel have something to do with sending of this server hello
> message...
>
> Best Regards
> Ankur 
>
> -----Original Message-----
> From: stunnel-users-bounces at mirt.net
> [mailto:stunnel-users-bounces at mirt.net] On Behalf Of Carter Browne
> Sent: Thursday, March 11, 2010 7:09 PM
> To: stunnel-users at mirt.net
> Subject: Re: [stunnel-users] Stunnel.log file not got created
>
> Ankur,
>
> You have to specify a log file in the configuration file, e.g.;
>
> output = stunnel.log
>
> The location of the log file depends on the environment and version you
> are running.  In Windows, the above statement puts the log file in
>
> %programfiles%\stunnel
>
> In Linux in versions through 4.29, I used
>
> output = /etc/stunnel/stunnel.log
>
> which puts the log file in
>
> /etc/stunnel.
>
> I did not use version 4.30, but in version 4.31 the directory is
> relative to the chroot so I now use
>
> output = /stunnel.log
>
> which puts the log file in
>
> /usr/local/var/lib/stunnel
>
> using the standard settings.
>
>
> Carter
>
>
>
> Carter Browne
> CBCS
> cbrowne at cbcs-usa.com
> 781-721-2890
>
>
> On 3/11/2010 5:15 AM, ankur.agarwal at wipro.com wrote:
>   
>>  
>>
>> Hi,
>>  There is one case in my environment where secure connection to server
>>     
>   
>> doesn't happen...reason is only client hello is sent in ethereal 
>> traces and no server hello reply has been sent.although I have enable 
>> debug level 7 in stunnel.conf file but then also stunnel.log file has 
>> not been created.If server is the setup on which stunnel package is 
>> installd,then is there anything to do with stunnel package if server 
>> hello reply has not been sent for client hello meaasge.
>>
>> Can anybody tell in what cases server hello message is not sent.
>>
>> Regards
>> Ankur
>>
>> Please do not print this email unless it is absolutely necessary. 
>>
>> The information contained in this electronic message and any
>>     
> attachments to this message are intended for the exclusive use of the
> addressee(s) and may contain proprietary, confidential or privileged
> information. If you are not the intended recipient, you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately and destroy all copies of this message and any attachments. 
>   
>> WARNING: Computer viruses can be transmitted via email. The recipient
>>     
> should check this email and any attachments for the presence of viruses.
> The company accepts no liability for any damage caused by any virus
> transmitted by this email. 
>   
>> www.wipro.com
>> _______________________________________________
>> stunnel-users mailing list
>> stunnel-users at mirt.net
>> http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>> .
>>
>>   
>>     
> _______________________________________________
> stunnel-users mailing list
> stunnel-users at mirt.net
> http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>
> Please do not print this email unless it is absolutely necessary. 
>
> The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 
>
> WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. 
>
> www.wipro.com
> .
>
>