[stunnel-users] stunnel OK without "transparent = source", with = timeout problem

[Elodie BOSSIER]

Again me ...

I don't find my problem and i start to despair alone ...

My stunnel works correctly with this config file :

pid = /stunnel.pid
debug = 7
output = /var/log/stunnel.log
options = NO_SSLv2

#transparent = source

[virtual]
accept = 443
cert = /usr/local/openssl/etc/CERTIFICATES/www.franceserv.fr_cert.cert
key = /usr/local/openssl/etc/PRIVATE_KEYS/www.franceserv.fr_key.pem
connect = www.franceserv.fr:80
[sni1]
sni = virtual:elodie.franceserv.com
cert = /etc/ssl-fsh/cert-elodie.franceserv.com.pem
key = /etc/ssl-fsh/key-franceserv.key
connect = elodie.franceserv.com:80
[sni2]
sni = virtual:befun.franceserv.com
cert = /etc/ssl-fsh/cert-befun.franceserv.com.pem
key = /etc/ssl-fsh/key-franceserv.key
connect = befun.franceserv.com:80

But the IP transmited to my serveur is the stunnel IP and not the 
visitor behind her navigator
and it's don't work anymore when i take off the # to enable the 
transparent mode.

and this is my iptables tules :

   iptables -t mangle -N DIVERT
   iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
   iptables -t mangle -A DIVERT -j MARK --set-mark 1
   iptables -t mangle -A DIVERT -j ACCEPT
   ip rule add fwmark 1 lookup 100
   ip route add local 0.0.0.0/0 dev lo table 100
   echo 0 > /proc/sys/net/ipv4/conf/lo/rp_filter
   echo 1 > /proc/sys/net/ipv4/ip_forward

as it's said in the manual but nothing more ...

A friend have tested in her side and he have the same problem.

Someone could tell me my error please ?

Le 29/07/2011 03:25, Elodie BOSSIER a écrit :
> Back ...
>
> I don't find the problem,
>
> This is the log without transparent when it's working : 
> http://pastebin.com/mjReyE8a
> with transparent and not working : http://pastebin.com/ZGqRVXzF
>
> Thanks so much ...
>
> Le 28/07/2011 12:25, Elodie BOSSIER a écrit :
>> Greetings again,
>>
>> Thanks so much to have updated the manual about SNI, my stunel works 
>> correctly.
>>
>> But i have a tiny problem, when i visit my webserver, the 
>> SERVER['REMOTE_ADDR'] with PHP isn't the ip adress of the visitor but 
>> the IP of the stunnel.
>> I have read the manual about this transparent proxy and i don't 
>> sucess with the configuration.
>>
>> This is my config file :
>>
>> pid = /stunnel.pid
>> options = NO_SSLv2
>> transparent = source
>> [virtual]
>> accept = 443
>> cert = /usr/local/openssl/etc/CERTIFICATES/www.franceserv.fr_cert.cert
>> key = /usr/local/openssl/etc/PRIVATE_KEYS/www.franceserv.fr_key.pem
>> connect = www.franceserv.fr:80
>> [sni1]
>> sni = virtual:elodie.franceserv.com
>> cert = /etc/ssl-fsh/cert-elodie.franceserv.com.pem
>> key = /etc/ssl-fsh/key-franceserv.key
>> connect = elodie.franceserv.com:80
>> [sni2]
>> sni = virtual:befun.franceserv.com
>> cert = /etc/ssl-fsh/cert-befun.franceserv.com.pem
>> key = /etc/ssl-fsh/key-franceserv.key
>> connect = befun.franceserv.com:80
>>
>> It's don't work, i have a timeout with my browser.
>>
>> With iptables, i have set this :
>>
>>   iptables -t mangle -N DIVERT
>>   iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT
>>   iptables -t mangle -A DIVERT -j MARK --set-mark 1
>>   iptables -t mangle -A DIVERT -j ACCEPT
>>   ip rule add fwmark 1 lookup 100
>>   ip route add local 0.0.0.0/0 dev lo table 100
>>   echo 0 > /proc/sys/net/ipv4/conf/lo/rp_filter
>>   echo 1 > /proc/sys/net/ipv4/ip_forward
>>
>> My stunnel is on the server 192.168.0.20 and the webserver on 
>> 192.168.0.2
>>
>> I try to follow the help of 
>> http://www.stunnel.org/static/stunnel.html#service_level_options
>> with : transparent = none | source | destination | both (Unix only)
>>
>> Could you tell me what i make wrong please ?