[stunnel-users] issue with running stunnel

[Thomas Eifert]

Hi again Dewen;

It sounds to me like Stunnel isn't being accessed at all.  You should be 
seeing something in the
Stunnel log window.  I run Stunnel under Windows, so what I generally do 
is get Stunnel to listen
to the loopback interface at address 127.0.0.1, or some other address 
within the loopback interface
range.  As such, if I was attempting to access it with a utility like 
Netcat, my basic stunnel.conf would
look something like this for the client side:


debug =7

[service.name]
client = yes
accept = 127.0.0.1:12035
connect = destination.address:1230


Then, I would point Netcat to the listening address and port.  In your 
case, that might be netcat 127.0.0.1:12035.

Then see if Stunnel logs your connection attempt.

Again, this is under Windows, so your mileage may vary.

Let us know how it works out for you.

Regards;

Thomas

On 3/17/2012 12:32 PM, Dewen Kong wrote:
> Hi Thomas,
>
> Thank you for your help.
>
> here is the config file in one computer
>>> client = yes
>>> [ncat]
>>> accept = 12035
>>> connect = ***.***.***.***:1230
>> and on this computer, I run the command: cat test.file | 
>> netcat  ***.***.***.***: 12035. to connect the remote server with 
>> IP( ***.***.***.***) on port 12035. I figure on stunnel will accept 
>> the port 12035 and connect to the remote server on port 1230 or  I 
>> thought.
>
> and no another remote server, I run the command netcat -l -p 1230 
> which means listen to the port 1230.
>
> after I run the test, it seems on remote server didn't receive 
> anything on the port 1230.the log file of stunnel dooesn't have any 
> record of this communication.  the last line of the log file is still 
> "configuration successfully"
>
>  and the version of stunnel I use is 4.42
>
>
> any suggests that may be wrong?
>
>
> Dewen Kong
>
>>
>>
>
> On Fri, Mar 16, 2012 at 10:14 PM, Thomas Eifert <kxkvi at wi.rr.com 
> <mailto:kxkvi at wi.rr.com>> wrote:
>
>     Dewen;
>
>     I think I misread your post.  Please forgive me, as I'm unfamiliar
>     with the Netcat application.
>
>     If you could provide some additional detail, that might be helpful.
>
>     Regards;
>
>     Thomas
>
>
>
>     On 3/16/2012 9:38 PM, Thomas Eifert wrote:
>>     Dewen;
>>
>>     I don't know anything about Netcat, so I'm taking a stab in the
>>     dark here, but it looks as if
>>     you're pointing Netcat at port 1230, while your config file
>>     indicates that Stunnel would be
>>     listening on port 12035.  Try redirecting Netcat to the listening
>>     port.
>>
>>     If you need to post again, please indicate the version of Stunnel
>>     you are using, and what
>>     platform your are running it on.
>>
>>     Regards;
>>
>>     Thomas
>>
>>
>>     On 3/16/2012 5:35 PM, Dewen Kong wrote:
>>>     Hi all,
>>>     I am a new guy to stunnel.
>>>     here is the issue I meet, i install my stunnel in the lab. and
>>>     trying to run the test with netcat.
>>>     Here is the config file i test:
>>>     client side:
>>>     ...
>>>     ...
>>>     output = stunnel.log
>>>     client = yes
>>>     [ncat]
>>>     accept = 12035
>>>     connect = ***.***.***.***:1230
>>>     then I run "stunnel test.conf "and the the log file shows
>>>     configuration successfully
>>>     then I run the command  "cat test.file | netcat ***.***.***.***
>>>     12035 on the client side
>>>     and run netcat -l -p 1230 > output
>>>     nothing happens.
>>>     And I check the log file. there is no record about the netcat. 
>>>     I don't know what happened.
>>>
>>>
>>>     -- 
>>>     */Dewen Kong/*
>>>
>>>
>>>     _______________________________________________
>>>     stunnel-users mailing list
>>>     stunnel-users at stunnel.org  <mailto:stunnel-users at stunnel.org>
>>>     http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>>
>>     -- 
>>     Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.
>>
>>
>>     _______________________________________________
>>     stunnel-users mailing list
>>     stunnel-users at stunnel.org  <mailto:stunnel-users at stunnel.org>
>>     http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>
>     -- 
>     Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.
>
>
>     _______________________________________________
>     stunnel-users mailing list
>     stunnel-users at stunnel.org <mailto:stunnel-users at stunnel.org>
>     http://stunnel.mirt.net/mailman/listinfo/stunnel-users
>
>
>
>
> -- 
> */Dewen Kong/*

-- 
Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.stunnel.org/pipermail/stunnel-users/attachments/20120317/17ca5060/attachment.html>