[stunnel-users] openvms and stunnel

[Coviello, Paul]

Let me see so I need to do the following.
> connect = 192.168.0.1:993
> connect = 192.168.20.140:993
> connect = 192.168.xx.xxx:993
> connect = 192.168.xx.xxy:993

Thanks
Paul


-----Original Message-----
From: stunnel-users [mailto:stunnel-users-bounces at stunnel.org] On Behalf Of Ludolf Holzheid
Sent: Wednesday, April 08, 2015 11:35 AM
To: stunnel-users at stunnel.org
Subject: Re: [stunnel-users] openvms and stunnel

On Wed, 2015-04-08 11:18:43 -0400, Coviello, Paul wrote:
> Hello
> 
> I'm trying to setup stunnel 4.20 yes it is an old version but the only one on HP's website for VMS.
> 
> I need a little help in the conf files.
> 
> Since I will be using telnet, do I need to put in each machines ip address that will be connecting? So in the example below do I create a listing of connects?
> 
> [telnet]
> accept  = 999
> connect = 192.168.0.1:993

Paul,

the configuration above makes stunnel listen on local port 999, accepting connections from all IP addresses and forwards the traffic to port 993 of the box with IP address 192.168.0.1.

Depending on the 'client = ...' statement, stunnel expects the traffic at port 999 to be encrypted (server mode, client = no, default), or at port 993 (client mode, client = yes).

Any access control may be implemented via libwrap and (in server mode) via restriction of the accepted certificates.

HTH,

Ludolf

-- 

Ludolf Holzheid
 
Bihl+Wiedemann GmbH
Floßwörthstraße 41
68199 Mannheim, Germany
 
Tel: +49 621 33996-0
Fax: +49 621 3392239
 
mailto:lholzheid at bihl-wiedemann.de
http://www.bihl-wiedemann.de
 
Sitz der Gesellschaft: Mannheim
Geschäftsführer: Jochen Bihl, Bernhard Wiedemann Amtsgericht Mannheim, HRB 5796 _______________________________________________
stunnel-users mailing list
stunnel-users at stunnel.org
https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users