- stunnel-users - stunnel.org

Re: [stunnel-users] Problem with 5.40 and Peer suddenly disconnected
by Brian McGinity 08 Feb '17

08 Feb '17

I found the archives and downgraded to 5.37 and this fixed the problem. Before going this route I tried 5.40 and 5.41 beta and both had the same issues with 'Peer suddenly disconnected'. Strange that it this was only happening for one particular connection (1 out of 7). It would happen with every test. If you would like for me to beta test another version, I would be happy to try. Bran

1 0

Problem with 5.40 and Peer suddenly disconnected
by Brian McGinity 07 Feb '17

07 Feb '17

After updating to stunnel 5.40 on x86-pc-msvc-1500 platform, I am getting a Peer suddenly disconnected each time I post data to a particular url. [VISION_WEB] client = yes accept = 127.0.0.1:1935 connect = xx.xx.web.com:443 sslVersion = TLSv1 2017.02.07 16:30:08 LOG5[160]: Service [XX_WEB] accepted connection from 192.168.100.21:53507 2017.02.07 16:30:08 LOG5[160]: s_connect: connected 11.11.111.36:443 2017.02.07 16:30:08 LOG5[160]: Service [XX_WEB] connected remote server from 192.168.100.21:53508 2017.02.07 16:30:08 LOG3[160]: SSL_connect: Peer suddenly disconnected 2017.02.07 16:30:08 LOG5[160]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket This is a production issue and is causing a lot of problems for a lot of people and I need to do something quickly. Is it possible to download stunnel 5.37 installed to see if going back to this version will fix this issue? Where is it? Or does anyone possibly know why this might be happening? Thank you for your help. Brian

1 0

Default passthrough to different destination?
by Mark Boyce 03 Feb '17

03 Feb '17

Hi All Wondering if there’s a way to pass an unencrypted connections traffic to an alternative location if a client does not SSL/TLS with the stunnel server? So considering stunnel running as a server to wrap an unencrypted SMTP server. If the SMTP client/server talks SSL/TLS all is good and as expected. If the client tries to talk without encryption it gets disconnect. Is there any way to send this traffic elsewhere rather than disconnecting the client? So that stunnel is adding an SSL/TLS option to a service rather than enforcing it. Splitting the traffic to destination servers based on if the client was encrypted or not. Thoughts? Thanks Mark

2 3

Mixed cert/PSKsecrets & TLS/SSL before proxy
by Varda Zklir 02 Feb '17

02 Feb '17

Hello Gentlemen. Needs help in configuration or negative clarifications on two issues. 1) First question whether is mixed use of cert/PSKsecrets auth possible? The same method (ether cert or PSKsecrets explicitly) serverside trough the parent [TLS] and inherited services works properly. But mixed cert/PSKsecrets like in config snippet below doesn't work. [TLS] client = no accept = 0.0.0.0:https connect = localhost:http cert = /etc/opt/stunnel/stunnel.pem [ssh] client = no sni = TLS:ssh connect = localhost:ssh [socks] client = no sni = TLS:socks protocol = socks PSKsecrets = /etc/opt/stunnel/auth/passwd The idea is to pass insensibly all incorrect or non-SNI aware requests to main http server and hide other multiplexed services. And at the same time to establish encryption and password access control to [socks] service. 2) And the second question is it possible proxy CONNECT after establishing SSL/TLS encryption? The configuration section: [ssh] accept = 22222 protocol = connect protocolHost = server.tld:443 protocolUsername = usernamehere protocolPassword = passwordhere connect = proxy.tld:8080 Say to establish unencrypted connection with proxy, pass username and password, tell proxy to establish CONNECT to target 443 and then transmit SSL/TLS to it. Goal is if I have SSL/TLS termination server/proxy on port 443 so we at first speak SSL/TLS with proxy and only then proceed to proxy requests phase. Thanks for future explanations.

1 0

installation problems
by HOFFMAN, GEOFFREY 30 Jan '17

30 Jan '17

I am having trouble installing stunnel on CentOS 7.3. I was given a directive to "use the latest OpenSSL" so on one target machine, it has 1.0.2k built from source. On the machine with OpenSSL 1.0.2k, when attempting to install stunnel, when I run ./configure, it passes with this info: configure: FIPS support not found Then make fails with: /usr/bin/ld: /usr/local/ssl/lib/libssl.a(s3_srvr.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC On another target machine, it has 1.0.1e-fips, installed via yum package. On the machine with OpenSSL 1.0.1e-fips, ./configure fails with: checking for TLS directory... not found configure: error: Could not find your TLS library installation dir Advice on installing with the latest OpenSSL (1.0.2k) would be much appreciated. This e-mail, including any attachments, is meant only for the intended recipient of the transmission, and may be a confidential communication or a communication privileged by law. If you received this e-mail in error, any review, use, dissemination, distribution, or copying of this e-mail is strictly prohibited. Please notify us immediately of the error by return e-mail and please delete this message from your system. Thank you in advance for your cooperation.

1 0

Life cycle information
by Ben Harper 30 Jan '17

30 Jan '17

Greetings, I am trying to confirm some life cycle information, mainly supported version(s) and what versions do not insure backwards compatibility. It would appear that only the latest version is supported, per the first item under 'Before you send your question to stunnel-users' on the Mailing Lists page[0]. Does this project use semantic versioning? Will incompatibilities only come when a 6.x.x version is released? It seems at one point this was the case per the 'Upgrading to stunnel 4' link on the Documentation page[1]. Are my assumptions correct? Thanks, Ben [0]: https://www.stunnel.org/lists.html [1]: https://www.stunnel.org/docs.html

1 0

Proxy one site to HTTPS?
by Jeffrey Walton 30 Jan '17

30 Jan '17

Hi Everyone, I'm having trouble setting up a proxy for one site. The client is MacPorts on OS X 10.5. It makes some requests for files over port 80, but they apparently need to be made over port 443. Also see https://trac.macports.org/ticket/53423 and https://trac.macports.org/ticket/53347. My first question is, is it possible to proxy one site to HTTPS? My second question is, how does one do so if it is possible? The concrete example from the 53423 bug report is, I need to proxy requests from http://distfiles.macports.org/... to https://distfiles.macports.org/... I also need the opposite on the responses. Thanks in advance, Jeff

1 0

Client certificate using CAPI
by stunnel.org＠pepak.net 29 Jan '17

29 Jan '17

Hi! I am trying to use stunnel to connect to my own server using both a server and a client certificate. I got the tunnel to work, provided that the client uses a PEM certificate stored in a file. However, I would like to use CAPI, because that would allow me to use a smart card, which I finally got Windows to recognize (a nightmare of its own). Unfortunately, it seems that the client-side stunnel won't send a client certificate because the server-side stunnel will always close the connection with: SSL_accept: 140890C7: error:140890C7:SSL routines:ssl3_get_client_certificate:peer did not return a certificate My client-side stunnel log shows that server sent some kind of identification of all the supported client certificates to the client, but that's all - the client stunnel fails to follow through: TLS state (connect): SSLv3 read server key exchange A Client CA: emailAddress=some(a)email.com, O=Some name, CN=Pepak Yubico 4 White Client CA: emailAddress=root(a)email.com, CN=Pepak (root CA) TLS state (connect): SSLv3 read server certificate request A TLS state (connect): SSLv3 read server done A TLS state (connect): SSLv3 write client certificate A TLS state (connect): SSLv3 write client key exchange A TLS state (connect): SSLv3 write change cipher spec A TLS state (connect): SSLv3 write finished A TLS state (connect): SSLv3 flush data SSL_connect: Peer suddenly disconnected As far as I can tell, the CN=Pepak Yubico 4 White matches what my Windows show as the name of the certificate on the smartcard. Following up on https://www.stunnel.org/pipermail/stunnel-users/2016-February/005393.html, I tried to add a "key = Pepak Yubico 4 White" line to the client-side stunnel's config, but it doesn't seem to have any effect. What could be the problem? The client-side config file is: compression = deflate debug = debug fips = no taskbar = no options = NO_SSLv2 engine = capi [echo-client] client = yes accept = 3000 connect = 10.0.0.1:30000 requireCert = yes verifyChain = yes verifyPeer = yes CAfile = desktop.pem engineId = capi key = Pepak Yubico 4 White The only suspicious thing that I see is that my client certificate says that its only purpose is to verify the identity of the remote computer. Could that be the reason the handshake fails? Thanks for any help. Pepak

1 0

SSL errors do not trigger failover?
by Richard Monk 27 Jan '17

27 Jan '17

Hello! We are using stunnel to work around an SSL issue in another service, and set stunnel.conf up to do prio failover. We noticed something unusual. If the TCP session connects, but the SSL negotiation fails, it doesn't fail over to the next server on the list. I looked at the code for the latest version and this doesn't seem to be caught anywhere. What I saw in client.c shows that it only checks failover after trying to establish the TCP session, but then the SSL session happens later and doesn't give any info back to the failover code should something go wrong. Is this expected behavior, or should I look into a bug report / patch? I was thinking maybe a configurable option to allow SSL errors to trigger failover just like TCP errors. -- Richard Monk (rmonk(a)redhat.com) - Senior Principal Security Analyst Red Hat Inc. - Raleigh NC GPG Key ID: 0x942CDB25

1 0

Please Help to configure Stunnel for SHOUTcast
by Frans Rehl 24 Jan '17

24 Jan '17

Hello Stunnel Members I am wondering if any of you can help me to configure stunnel for shoutcast. I have a VPS with Windows Server 2012 R2 and I cannot find the correct configuration for windows server. Can someone help me please? My shoutcast is currently streaming on port 8000 however, I don't understand some part of the configuration, such as; cert -pem and ca-pem Could someone guide me? Best

1 0

Creating tunnel to smtp.office365.com:587
by Andrew Culver 17 Jan '17

17 Jan '17

Hello, This is my first time using stunnel so I'm still learning how it works. This may have already been asked, but I'm not sure what to search for in the archives. We have a number of hosts in private IP space that we'd like to be able to send mail to smtp.office365.com:587. I'm trying to configure stunnel for this purpose. What I'd like is to set up a stunnel instance on a server which will accept TLS connections on port 50025. Stunnel will then connect to smtp.office365.com:587 which also uses TLS. How can I do this? I am able to configure stunnel to accept my connection on 587, but the connection is immediately closed (below). If I add client = yes, then I just get: aculver stunnel # openssl s_client -starttls smtp -connect localhost:50025 CONNECTED(00000003) didn't found starttls in server response, try anyway... Here is my config: aculver stunnel # egrep -v '^;|^$' stunnel.conf ; Sample stunnel configuration file for Unix by Michal Trojnara 2002-2015 setuid = nobody setgid = nogroup pid = /usr/local/var/run/stunnel/stunnel.pid [o365-smtp] accept = 50025 cert = /usr/local/etc/stunnel/stunnel.pem connect = smtp.office365.com:587 verifyChain = yes CApath = /etc/ssl/certs protocol = smtp What am I doing wrong? Here's what I get when I don't have client = yes: aculver stunnel # openssl s_client -starttls smtp -connect localhost:50025 CONNECTED(00000003) depth=0 C = CA, ST = Ontario, L = London, O = The University of Western Ontario, OU = ITS, CN = aculver.ws.its.uwo.ca, emailAddress = aculver(a)uwo.ca verify error:num=18:self signed certificate verify return:1 depth=0 C = CA, ST = Ontario, L = London, O = The University of Western Ontario, OU = ITS, CN = aculver.ws.its.uwo.ca, emailAddress = aculver(a)uwo.ca verify return:1 139954991064736:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1263:SSL alert number 40 139954991064736:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- Certificate chain 0 s:/C=CA/ST=Ontario/L=London/O=The University of Western Ontario/OU=ITS/CN=aculver.ws.its.uwo.ca/emailAddress=aculver(a)uwo.ca i:/C=CA/ST=Ontario/L=London/O=The University of Western Ontario/OU=ITS/CN=aculver.ws.its.uwo.ca/emailAddress=aculver(a)uwo.ca --- Server certificate -----BEGIN CERTIFICATE----- MIIEJzCCAw+gAwIBAgIJAM0DgGLDIh5lMA0GCSqGSIb3DQEBCwUAMIGpMQswCQYD VQQGEwJDQTEQMA4GA1UECAwHT250YXJpbzEPMA0GA1UEBwwGTG9uZG9uMSowKAYD VQQKDCFUaGUgVW5pdmVyc2l0eSBvZiBXZXN0ZXJuIE9udGFyaW8xDDAKBgNVBAsM A0lUUzEeMBwGA1UEAwwVYWN1bHZlci53cy5pdHMudXdvLmNhMR0wGwYJKoZIhvcN AQkBFg5hY3VsdmVyQHV3by5jYTAeFw0xNzAxMTcxODAwNTdaFw0yMDAxMTcxODAw NTdaMIGpMQswCQYDVQQGEwJDQTEQMA4GA1UECAwHT250YXJpbzEPMA0GA1UEBwwG TG9uZG9uMSowKAYDVQQKDCFUaGUgVW5pdmVyc2l0eSBvZiBXZXN0ZXJuIE9udGFy aW8xDDAKBgNVBAsMA0lUUzEeMBwGA1UEAwwVYWN1bHZlci53cy5pdHMudXdvLmNh MR0wGwYJKoZIhvcNAQkBFg5hY3VsdmVyQHV3by5jYTCCASIwDQYJKoZIhvcNAQEB BQADggEPADCCAQoCggEBAL2A3QEU7ReMc+2dTJdxVnQx33dIomQvO6QOAaFkI9pt XF/UhSBCg3ZD2yZeKe5GQ0+KqSCjuxTZE+BMTIeNUtaFEDr9bMAx0toknm29ve1B wTErWoIjE4yqQ+j/D9JLp4BzBcptz1zaEdvhzzZo2zWVpqHrUHSXzoIELD4xyZyF UgbQ057diKr1fqM7q3ozCofslFGEjWtc8SsfwgToT72g7bRhx8a6F6SSX8afcVx0 hvvC998QbTNUCpJO6GPzWWCsITc3RPMZK3OJsbI4NNBKDZ8eE2NTSkcKjnibRWFx bwCTlSZ5XABQrgXmEO51cx6DBAK/8cV8W2H/VNr9SXkCAwEAAaNQME4wHQYDVR0O BBYEFMPXcnQduKdorSNrFIR1up+a5V7RMB8GA1UdIwQYMBaAFMPXcnQduKdorSNr FIR1up+a5V7RMAwGA1UdEwQFMAMBAf8wDQYJKoZIhvcNAQELBQADggEBAKqmaC+g RD1KEWT2yJit0FRIuwzFYmh/jgQ0ofabWQIuQtyNeqVnATU5FMOmox9MgbbsBanC SBVxuiLsWruk6VTjByHaIPAfsdWVKYMfLXO2Rku8GTp1X0B+HcNxh18tKr9s72rB AmapnD1GrYDAlBBgwQz+Ei1iRz+rqKsPvvJ/IEzZ02uhxV0ZWxBi5gTqAQc+pi3y I8DNBTxev2BMw+YCeNnrH3ryrJ8vKYlUmxE0k2POH1ihlpzdx9jtKC9TKR1kahMP 3lbldSHmW9DWeOfzQZ6NDHADSI698HaYfWQXUqbXjNJsxFb47pnjmyWgKseAT9iw w9nPDtkCmUihuBM= -----END CERTIFICATE----- subject=/C=CA/ST=Ontario/L=London/O=The University of Western Ontario/OU=ITS/CN=aculver.ws.its.uwo.ca/emailAddress=aculver(a)uwo.ca issuer=/C=CA/ST=Ontario/L=London/O=The University of Western Ontario/OU=ITS/CN=aculver.ws.its.uwo.ca/emailAddress=aculver(a)uwo.ca --- No client certificate CA names sent --- SSL handshake has read 1741 bytes and written 138 bytes --- New, TLSv1/SSLv3, Cipher is ECDHE-RSA-AES256-GCM-SHA384 Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1.2 Cipher : ECDHE-RSA-AES256-GCM-SHA384 Session-ID: Session-ID-ctx: Master-Key: 9B6FC3BBEEADF6673416272CA03FA44A2B10BADB3B843317403C03904F0E45E922EA2581F313BF5282C0A47498E43C8D Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None Start Time: 1484680413 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- aculver stunnel # Thanks, Andrew

1 0

Forwarding ip without HAProxy protocol
by John BYaka 06 Jan '17

06 Jan '17

Is it possible to forward real ip in special header? I know about 'protocol=proxy' but for using this i need to implement HAProxy protocol in app.

1 0

Stunnel and tokens on Windows
by stunnel.org＠pepak.net 31 Dec '16

31 Dec '16

Hi! I would very much like to switch my Stunnel setup to use hardware tokens. Stunnel apparently supports that using a PKCS11 engine, but I am having hard luck trying to figure it out for Windows, because 1) my practical experience with tokens is nonexistent at the moment, and 2) there are very few pages with a relevant information (basically, I was only able to find the very ancient http://martlaak.wikia.com/wiki/Stunnel_and_engine_pkcs11 and two russian pages http://forum.rutoken.ru/topic/1639/ and https://habrahabr.ru/post/135369/ which probably do just what I need, but I am not so sure they are applicable to my needs as I do not have a rutoken). I guess I would be satified if someone told me, "yes, these pages are applicable, just buy a xxxtoken instead of rutoken"; I would be happier with a full guide, but I can't expect anyone to write it - with the possible exception of Michal Trojnara's paid support (would that be possible?). Thanks, pepak

1 0

Re: [stunnel-users] Public domain [PATCH] support environment variables in config file
by Dmitry Bakshaev 21 Dec '16

21 Dec '16

2016-05-31 12:02 GMT+04:00 Pierre Delaage <delaage.pierre(a)free.fr>: > Did not have a look at the code yet, but should it be possible to replace > envvars usage by some keys in the registry on windows platform and/or > %userprofile%/config-file ? > > Anyway, my opinion on the patch is that there is no real interest for > "generic/self-expanding" config file , and it is even dangerous : > I would not trust stunnel if, at run time, its config could be modified by > USER envvars... > which difference between %userprofile%/config-file and USER envvars? both are USER owned and USER controlled. certificate and keys also USER private data. and stunnel started by USER owned by USER. if stunnel started by SYSTEM/ADMIN he uses SYSTEM/ADMIN envvars (if needed), certs, keys, etc. global "generic/self-expanding" config file is ADMIN owned. USER has permissions to substitute some values, restricted by ADMIN.

2 10

problem running stunnel as windows service
by Jeff Saxton 09 Dec '16

09 Dec '16

stunnel 5.38 on x86-pc-msvc-1500 platform compiled/running with OpenSSL 1.0.2j-fips 26 Sep 2016 Windows Server 2012R2 Standard When I try and start the service I get: Windows could not start the Secure Socket Tunneling Protocol Service on the Local Computer. Error: 1079: The account specified for this service is different from the account specified for other services running in the same process. So after a little reading I went into Services->Logon and checked: Allow Service to interact with desktop Same Error So I created an account in the Local Administrators group and gave it logon as a service Same thing Any ideas? -- Jeff Saxton Tanium CELL: +US 650.235.0776

1 0

Using transparent destination option with multiple network interfaces.
by Rodney Lott 08 Dec '16

08 Dec '16

Hi, there. Base server details: - Using the latest stunnel 5.37 - Ubuntu Trusty - The computers communicating with each other use bridged interface addresses that are configured by the clustering software (i.e. to ensure that at least one of the nodes is master and host to some common addresses) - For discussion purposes, let's say that each server has an eth0 and eth1, and that the master node has two additional bridged address (ie. eth0:shared-ip1, eth1:shared-ip2) - The slave nodes will try to connect to eth0:shared-ip1:20001 and eth1:shared-ip2:20001 that are hosted on the master - The master node will also try to connect to these as well, while listening on port 20001 - Not running in a chroot and am running stunnel as stunnel4 user - I have created a working solution using 4 services in the stunnel config and using hard-coded destinations in the iptables rules and the stunnel config. I want to create something more dynamic and versatile. I am trying to insert a stunnel instance between my server application that attempts to connect to its twin on another server, using the bridging addresses. I am trying to avoid hard-coding destination IP addresses in my stunnel configuration file and the iptables rules. I also don't want to have separate rules for each interface. For example, from server A's perspective (i.e. the master node), the desirable sequence of events are: - Attempt to connect to port 20001 using the bridge addresses as destinations (in this case, they would be local interfaces). - Intercept the requests to port 20001 on server A and divert them to port 40000 for encryption (i.e. the local stunnel instance). - Send unencrypted data from stunnel directly to local 20001. At the same time, server B is doing the same, except that the bridge addresses reside on server A and are not local. So, server A would also need to do this: - Intercept external request for port 20001 and send it to stunnel port 40000 for encryption - Send decrypted packets to local port 20001 This same type of sequence would also be happening My stunnel configuration looks like this: fips=yes pid=/var/run/stunnel4/testsrv.pid debug=7 output=/var/log/stunnel4/testsrv.log sslVersion = TLSv1.2 key = <private-key-location> cert = <cert-location> CAfile = <ca-file-location> ciphers = ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:AES256-GCM-SHA384:AES256-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:AES128-GCM-SHA256:AES128-SHA256 [test-srv] client=yes accept=40000 transparent=destination My iptables rules, base on what I read in the man page, are this: STUNNEL_UID=$(id -u stunnel4) # Redirect any incoming requests to port 20001 iptables -t nat -A PREROUTING -p tcp --dport 20001 ! -i lo -j DNAT --to-destination 127.0.0.1:40000 iptables -A INPUT -p tcp --dport 40000 -j ACCEPT # Redirect any outgoing locally generated requests for 20001 to stunnel port 40000 iptables -t nat -A OUTPUT -p tcp --dport 20001 -m owner ! --uid-owner $STUNNEL_UID -j DNAT --to-destination 127.0.0.1:40000 # Redirect the output of stunnel to the local 20001 port iptables -t nat -A OUTPUT -p tcp --dport 20001 -m owner --uid-owner $STUNNEL_UID -j REDIRECT --to-ports 20001 iptables -t nat -A INPUT -p tcp -d 127.0.0.1 --dport 20001 -j ACCEPT These rules are not completely adequate. For now, I'm just trying to get server A's connection to port 20001 working without having to worry about incoming from server B. When I do this and start stunnel and my process, server A's stuff appears to loop endlessly. I think this is happening because the packets that come out of stunnel, due to the transparency configuration, look exactly the same as the original. If I log stuff using iptables, I see repeat entries like this: nat-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=150.150.242.27 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=30541 DF PROTO=TCP SPT=50101 DPT=20001 WINDOW=43690 RES=0x00 SYN URGP=0 filter-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=30541 DF PROTO=TCP SPT=50101 DPT=40000 WINDOW=43690 RES=0x00 SYN URGP=0 nat-POSTROUTING: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=30541 DF PROTO=TCP SPT=50101 DPT=40000 WINDOW=43690 RES=0x00 SYN URGP=0 filter-INPUT: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=150.150.242.26 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=30541 DF PROTO=TCP SPT=50101 DPT=40000 WINDOW=43690 RES=0x00 SYN URGP=0 filter-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30542 DF PROTO=TCP SPT=50101 DPT=40000 WINDOW=342 RES=0x00 ACK URGP=0 filter-INPUT: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=150.150.242.26 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30542 DF PROTO=TCP SPT=50101 DPT=40000 WINDOW=342 RES=0x00 ACK URGP=0 nat-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=150.150.242.27 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48827 DF PROTO=TCP SPT=50102 DPT=20001 WINDOW=43690 RES=0x00 SYN URGP=0 filter-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48827 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=43690 RES=0x00 SYN URGP=0 nat-POSTROUTING: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48827 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=43690 RES=0x00 SYN URGP=0 filter-INPUT: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=150.150.242.26 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48827 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=43690 RES=0x00 SYN URGP=0 filter-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48828 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=342 RES=0x00 ACK URGP=0 filter-INPUT: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=150.150.242.26 DST=127.0.0.1 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48828 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=342 RES=0x00 ACK URGP=0 filter-OUTPUT: IN= OUT=lo SRC=150.150.242.26 DST=127.0.0.1 LEN=269 TOS=0x00 PREC=0x00 TTL=64 ID=48829 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=342 RES=0x00 ACK PSH URGP=0 filter-INPUT: IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=150.150.242.26 DST=127.0.0.1 LEN=269 TOS=0x00 PREC=0x00 TTL=64 ID=48829 DF PROTO=TCP SPT=50102 DPT=40000 WINDOW=342 RES=0x00 ACK PSH URGP=0 ... As can be seen, line 1 and line 7 are virtually identical. In the stunnel log, I can see that stunnel is receiving multiple requests for port 20001 in rapid succession but is not actually receiving any reply from the final destination. So, if anyone has any ideas, tweaks or suggestions for how to solve this problem or where I am going wrong, I would appreciate it. I can use a static configuration with hard-coded destination IP's but if there is an alternative, I would like to know. I have tried for several days to figure this out and have searched Google extensively, including stunnel-users postings, to figure out how to do this without success. Thanks, Rodney Lott

1 1

setgroups: notowner (1)
by Jones, Russell - NONEMP 08 Dec '16

08 Dec '16

I am working on a project where we are migrating to a new datacenter. The new datacenter will not allow compilers on their servers, so I am unable to do a new stunnel build on the new server. I am attempting to move the stunnel install/executables from the old server to the new one. I got past several errors for libraries not found, but now I am stuck. stunnel process will not start, and gets several messages "setgoups: Not owner (1)" I am not sure what I need to do with permissions, ownership, etc to make this work. log attached Thanks for your help, Russell J. This electronic message transmission contains information from CSRA that may be attorney-client privileged, proprietary or confidential. The information in this message is intended only for use by the individual(s) to whom it is addressed. If you believe you have received this message in error, please contact me immediately and be aware that any use, disclosure, copying or distribution of the contents of this message is strictly prohibited. NOTE: Regardless of content, this email shall not operate to bind CSRA to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of email for such purpose.

1 0

Stunnel in inetd mode and PID in logs
by Bruce Guenter 02 Dec '16

02 Dec '16

Hi. I am running stunnel in inetd mode (under tcpserver). Prior to version 5.12 (as far as I can tell), the logs output by stunnel would include the tag LOG#[PID]. As of version 5.12, the logs now say LOG#[main] (and later LOG#[ui]). Is there any way to get the PID back in the logs? I have tried all different choices for the logId configuration option, and it doesn't seem to make a difference there. Thanks. -- Bruce Guenter <bruce(a)untroubled.org> http://untroubled.org/

1 0

Re: [stunnel-users] stunnel 5.38 released
by Javier 26 Nov '16

26 Nov '16

Hi there. Dumb error I just found. Dumb because I just found it and maybe it was earlier among us. Or maybe it is "a feature". But I'd swear it worked as expected in the past. Testing the new SNI option I made a mistake and I had to edit and reload the configuration file. Nothing strange until here. The problem is comming because I load a custom .conf file as "stunnel.exe file.conf" for the server mode, so when a parsing error is found, Stunnel lose the track of the custom .conf file and when you reload the corrected configuration through the "Reload configuration" menu option, it doesn't load the custom .conf but the default stunnel.conf. But before reloading, the "Edit configuration" menu option points correctly to the correct configuration file and opens it to edit. Only "Reload configuration" lose the track of the file. This is happening in the windows environment (just if it wasn't clear enough by the .exe extension ;) ). Windows 2000 (yet). I can't tested versions beyond. Regards.

1 0

Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility
by Jose Alf. 25 Nov '16

25 Nov '16

Jothish, 1. You are using a very outdated version of OpenSSL (openssl 0.9.8 is EOL). I suggest you use a newer, supported version. 2. On a DOS Window, try this:openssl dhparam -rand randfile1;randfile2;randfile3 1024 where randfile1,randfile2.... are existing files or directories to use as entrophy sources. If you're on Linux you can use dd if=/dev/urandom count=2 | openssl dhparam -rand - 1024 This will print something like this:WARNING: can't open config file: c:\openssl-vc/ssl/openssl.cnf Loading 'screen' into random state - done 0 semi-random bytes loaded Generating DH parameters, 1024 bit long safe prime, generator 2 This is going to take a long time ..+.. bla, bla....++* unable to write 'random state' -----BEGIN DH PARAMETERS----- MIGHAoGBAJJ+QAYkKQd0pG1lxZKDYVZaURkTINQho8CWCUYOMp2ZEwZeMrEv+kjd PVb4Ilnah1TmZQOxu1v8HtSWmKpclhlTDKjmDbhznUFkQhmRGjxXDCfrhnvNI4hV kOB/3lGcWo50ttf+ZqNaXd0lKf9YfnjkRUSUtrHiMRL9CdecxQXbAgEC -----END DH PARAMETERS----- Now, cut from ---BEGIN... all the way to PARAMETERS--- and add it to your cert PEM file. 3. Try again, your check command: openssl dhparam -inform PEM -in ./training_client.pem -check -textShould print something like: DH Parameters: (1024 bit) prime: 00:92:7e:40:06:24:29:07:74:a4:6d:65:c5:92:83: ... 31:12:fd:09:d7:9c:c5:05:db generator: 2 (0x2) DH parameters appear to be ok. -----BEGIN DH PARAMETERS----- MIGHAoGBAJJ+QAYkKQd0pG1lxZKDYVZaURkTINQho8CWCUYOMp2ZEwZeMrEv+kjd ....-----END DH PARAMETERS----- 4. Now, try connecting from SFDC to tibco and let us know. SaludosJose From: "jothish.chokkalingam(a)accenture.com" <jothish.chokkalingam(a)accenture.com> To: josealf(a)rocketmail.com Cc: cbrowne(a)cbcs-usa.com; stunnel-users(a)stunnel.org Sent: Thursday, November 24, 2016 6:45 AM Subject: RE: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility #yiv9373448809 #yiv9373448809 -- _filtered #yiv9373448809 {font-family:Wingdings;panose-1:5 0 0 0 0 0 0 0 0 0;} _filtered #yiv9373448809 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv9373448809 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv9373448809 {font-family:Consolas;panose-1:2 11 6 9 2 2 4 3 2 4;}#yiv9373448809 #yiv9373448809 p.yiv9373448809MsoNormal, #yiv9373448809 li.yiv9373448809MsoNormal, #yiv9373448809 div.yiv9373448809MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:11.0pt;color:black;}#yiv9373448809 a:link, #yiv9373448809 span.yiv9373448809MsoHyperlink {color:#0563C1;text-decoration:underline;}#yiv9373448809 a:visited, #yiv9373448809 span.yiv9373448809MsoHyperlinkFollowed {color:#954F72;text-decoration:underline;}#yiv9373448809 p {margin-right:0in;margin-left:0in;font-size:11.0pt;color:black;}#yiv9373448809 pre {margin:0in;margin-bottom:.0001pt;font-size:10.0pt;color:black;}#yiv9373448809 p.yiv9373448809MsoListParagraph, #yiv9373448809 li.yiv9373448809MsoListParagraph, #yiv9373448809 div.yiv9373448809MsoListParagraph {margin-top:0in;margin-right:0in;margin-bottom:0in;margin-left:.5in;margin-bottom:.0001pt;font-size:11.0pt;color:black;}#yiv9373448809 span.yiv9373448809HTMLPreformattedChar {font-family:Consolas;color:black;}#yiv9373448809 span.yiv9373448809EmailStyle20 {color:windowtext;}#yiv9373448809 span.yiv9373448809EmailStyle21 {color:#1F497D;}#yiv9373448809 span.yiv9373448809EmailStyle22 {color:#1F497D;}#yiv9373448809 span.yiv9373448809EmailStyle23 {color:#1F497D;}#yiv9373448809 .yiv9373448809MsoChpDefault {font-size:10.0pt;} _filtered #yiv9373448809 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv9373448809 div.yiv9373448809WordSection1 {}#yiv9373448809 _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {} _filtered #yiv9373448809 {}#yiv9373448809 ol {margin-bottom:0in;}#yiv9373448809 ul {margin-bottom:0in;}#yiv9373448809 Jose, For the issue as mentioned in below down mail I am following below two approaches, 1. Move the TLSv1.2 enabled traffic to an intermediate port and then to target port which has TLS1 enabled, in that ssl handshake from intermediate to target port getting below error. While triaging with openssl command, it is observed that the DH parameters are not proper. So we are trying to add the dh parameters C:\Users\robin.johnson\Documents\SSL\SSL>C:\openssl-0.9.8k_X64\bin\openssl dhparam -inform PEM -in ./training_client.pem -check -text unable to load DH parameters 1800:error:0906D06C:PEM routines:PEM_read_bio:no start line:.\crypto\pem\pem_lib.c:650:Expecting: DH PARAMETERS stunnel.logà2016.11.23 23:08:32 LOG3[131]: SSL_connect: 14082174: error:14082174:SSL routines:ssl3_check_cert_and_algorithm:dh key too small 2. Using https service in stunnel traffic is received by TLS V1.1 divert to non ssl enabled port. Thanks and Regards, Jothish TIBCO TSD Ph. : +91 44 39263958 Mobile : +91 9884040171 Support : +91 9962007110 OC : jothish.chokkalingam Group mail:- Telstra.psm.tsd.tibco(a)accenture.com From: Josealf.rm [mailto:josealf@rocketmail.com] Sent: Thursday, November 24, 2016 4:36 PM To: Chokkalingam, Jothish <jothish.chokkalingam(a)accenture.com> Cc: cbrowne(a)cbcs-usa.com; stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility Can you please elaborate? If you want us to help, you need to provide enough information. Regards Jose El 24/11/2016, a las 5:03 a.m., <jothish.chokkalingam(a)accenture.com> <jothish.chokkalingam(a)accenture.com> escribió: Jose, J you are right.i was trying but I thought it will work as a client and it worked as a workaround. But will check for the dh key small error while forwarding the traffic with SSL from intermediate port to another port. Thanks and Regards, Jothish TIBCO TSD Ph. : +91 44 39263958 Mobile : +91 9884040171 Support : +91 9962007110 OC : jothish.chokkalingam Group mail:- Telstra.psm.tsd.tibco(a)accenture.com From: Josealf.rm [mailto:josealf@rocketmail.com] Sent: Thursday, November 24, 2016 2:48 PM To: Chokkalingam, Jothish <jothish.chokkalingam(a)accenture.com> Cc: cbrowne(a)cbcs-usa.com; stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility Jothish, Stunnel in server mode is what you need, with 99.9% confidence. When you write: [https] Accept=443 Connect=local host:80 Client=no Stunnnel will expect TLS connections on port 443 and will forward then to your normal web server running on loopback port 80. Is that clear? Regards, Jose El 24/11/2016, a las 2:29 a.m., <jothish.chokkalingam(a)accenture.com> <jothish.chokkalingam(a)accenture.com> escribió: Is there a way to forward a Secure connection from one port to non secure port using stunnel. I am googling but unable to find. If you have can you let me know Thanks and Regards, Jothish TIBCO TSD Ph. : +91 44 39263958 Mobile : +91 9884040171 Support : +91 9962007110 OC : jothish.chokkalingam Group mail:- Telstra.psm.tsd.tibco(a)accenture.com From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org]On Behalf Of Carter Browne Sent: Wednesday, November 23, 2016 9:30 PM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility There are other tools for performing port forwarding with less overhead (I believe tappipe is one), although I make use stunnel to do this extensively. In order forward a secure connection from one port to another is a two step process with stunnel: A sample configuration segment would be: [SFDC reverse in] client = no accept = 8008 connect = localhost:48008 [SFDC reverse out] client = yes accept = localhost:48008 connect = localhost:8009 On 11/23/2016 10:18 AM, Rodney Lott wrote: Hi, there. I'm no stunnel expert, but here's my $0.05 (we have no pennies in Canada anymore ;-) ): - I would try including the key as well as the cert in your stunnel config - I would enable debug on the openssl s_client call to see if it will indicate why it is reseting. Same with your SFDC client to get more info. - Question: is the "WARNING: can't open config file" message below indicative of a permissions or path problem? - Question: Is the stunnel cert and key compatible with the TIBCO server's certificate? They need to be using certs generated from the same key source, don't they? - You might want to fix the SSL version in the stunnel config file (i.e. sslVersion = TLSv1.2) Good luck with your debugging. Rodney On 2016-11-22 07:43 PM, jothish.chokkalingam(a)accenture.com wrote: HI all, There is a problem we have currently connecting tibco client to SFDC sever via TLS v1.2 and that’s solved by using stunnel in client mode. And the communication from SFDC client to tibco server applications w.r.t TLS V1.2 I am unable to solve using stunnel. Below is the configuration in stunnel in server end to divert the traffic from 8008 to 8009, can you help here with the logs is the stunnel configuration is correct or there any missed/need to alter. [SFDC reverse proxy test] debug=7 ;client = yes accept = 8008àport used by sfdc client to connect to TIBCO server connect = localhost:8009 àTibco server that’s running cert = stunnel.pem 2016.11.23 08:31:56 LOG7[118]: Service [SFDC reverse proxy test] started 2016.11.23 08:31:56 LOG7[118]: Option TCP_NODELAY set on local socket 2016.11.23 08:31:56 LOG5[118]: Service [SFDC reverse proxy test] accepted connection from 101.167.198.14:54477 2016.11.23 08:31:56 LOG6[118]: Peer certificate not required 2016.11.23 08:31:56 LOG7[118]: SSL state (accept): before/accept initialization 2016.11.23 08:31:56 LOG3[118]: SSL_accept: Peer suddenly disconnected 2016.11.23 08:31:56 LOG5[118]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2016.11.23 08:31:56 LOG7[118]: Local descriptor (FD=696) closed 2016.11.23 08:31:56 LOG7[118]: Service [SFDC reverse proxy test] finished (0 left) PFB the openssl snap shot looks odd C:\Program Files (x86)\stunnel\bin>openssl s_client -connect localhost:8008 -prexit -showcerts WARNING: can't open config file: /devel/win32/openssl/openssl.cnf CONNECTED(0000016C) Thanks and Regards, Jothish TIBCO TSD Ph. : +91 44 39263958 Mobile : +91 9884040171 Support : +91 9962007110 OC : jothish.chokkalingam Group mail:- Telstra.psm.tsd.tibco(a)accenture.com This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility
by Josealf.rm 24 Nov '16

24 Nov '16

Can you please elaborate? If you want us to help, you need to provide enough information. Regards Jose > El 24/11/2016, a las 5:03 a.m., <jothish.chokkalingam(a)accenture.com> <jothish.chokkalingam(a)accenture.com> escribió: > > Jose, > J you are right.i was trying but I thought it will work as a client and it worked as a workaround. But will check for the dh key small error while forwarding the traffic with SSL from intermediate port to another port. > > Thanks and Regards, > Jothish > TIBCO TSD > Ph. : +91 44 39263958 > Mobile : +91 9884040171 > Support : +91 9962007110 > OC : jothish.chokkalingam > Group mail:- Telstra.psm.tsd.tibco(a)accenture.com > > From: Josealf.rm [mailto:josealf@rocketmail.com] > Sent: Thursday, November 24, 2016 2:48 PM > To: Chokkalingam, Jothish <jothish.chokkalingam(a)accenture.com> > Cc: cbrowne(a)cbcs-usa.com; stunnel-users(a)stunnel.org > Subject: Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility > > Jothish, > > Stunnel in server mode is what you need, with 99.9% confidence. > > When you write: > > [https] > Accept=443 > Connect=local host:80 > Client=no > > Stunnnel will expect TLS connections on port 443 and will forward then to your normal web server running on loopback port 80. > > Is that clear? > > Regards, > Jose > > El 24/11/2016, a las 2:29 a.m., <jothish.chokkalingam(a)accenture.com> <jothish.chokkalingam(a)accenture.com> escribió: > > > Is there a way to forward a Secure connection from one port to non secure port using stunnel. I am googling but unable to find. If you have can you let me know > > Thanks and Regards, > Jothish > TIBCO TSD > Ph. : +91 44 39263958 > Mobile : +91 9884040171 > Support : +91 9962007110 > OC : jothish.chokkalingam > Group mail:- Telstra.psm.tsd.tibco(a)accenture.com > > From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of Carter Browne > Sent: Wednesday, November 23, 2016 9:30 PM > To: stunnel-users(a)stunnel.org > Subject: Re: [stunnel-users] Help in setting stunnel in server mode to over come TLSV2 compatibility > > There are other tools for performing port forwarding with less overhead (I believe tappipe is one), although I make use stunnel to do this extensively. > > In order forward a secure connection from one port to another is a two step process with stunnel: > > A sample configuration segment would be: > > [SFDC reverse in] > > client = no > > accept = 8008 > > connect = localhost:48008 > > > [SFDC reverse out] > client = yes > accept = localhost:48008 > connect = localhost:8009 > > On 11/23/2016 10:18 AM, Rodney Lott wrote: > Hi, there. > > I'm no stunnel expert, but here's my $0.05 (we have no pennies in Canada anymore ;-) ): > - I would try including the key as well as the cert in your stunnel config > - I would enable debug on the openssl s_client call to see if it will indicate why it is reseting. Same with your SFDC client to get more info. > - Question: is the "WARNING: can't open config file" message below indicative of a permissions or path problem? > - Question: Is the stunnel cert and key compatible with the TIBCO server's certificate? They need to be using certs generated from the same key source, don't they? > - You might want to fix the SSL version in the stunnel config file (i.e. sslVersion = TLSv1.2) > > Good luck with your debugging. > > Rodney > > On 2016-11-22 07:43 PM, jothish.chokkalingam(a)accenture.com wrote: > HI all, > > There is a problem we have currently connecting tibco client to SFDC sever via TLS v1.2 and that’s solved by using stunnel in client mode. And the communication from SFDC client to tibco server applications w.r.t TLS V1.2 I am unable to solve using stunnel. Below is the configuration in stunnel in server end to divert the traffic from 8008 to 8009, can you help here with the logs is the stunnel configuration is correct or there any missed/need to alter. > > [SFDC reverse proxy test] > debug=7 > ;client = yes > accept = 8008àport used by sfdc client to connect to TIBCO server > connect = localhost:8009 àTibco server that’s running > cert = stunnel.pem > 2016.11.23 08:31:56 LOG7[118]: Service [SFDC reverse proxy test] started > 2016.11.23 08:31:56 LOG7[118]: Option TCP_NODELAY set on local socket > 2016.11.23 08:31:56 LOG5[118]: Service [SFDC reverse proxy test] accepted connection from 101.167.198.14:54477 > 2016.11.23 08:31:56 LOG6[118]: Peer certificate not required > 2016.11.23 08:31:56 LOG7[118]: SSL state (accept): before/accept initialization > 2016.11.23 08:31:56 LOG3[118]: SSL_accept: Peer suddenly disconnected > 2016.11.23 08:31:56 LOG5[118]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket > 2016.11.23 08:31:56 LOG7[118]: Local descriptor (FD=696) closed > 2016.11.23 08:31:56 LOG7[118]: Service [SFDC reverse proxy test] finished (0 left) > > PFB the openssl snap shot looks odd > C:\Program Files (x86)\stunnel\bin>openssl s_client -connect localhost:8008 -prexit -showcerts > WARNING: can't open config file: /devel/win32/openssl/openssl.cnf > CONNECTED(0000016C) > > Thanks and Regards, > Jothish > TIBCO TSD > Ph. : +91 44 39263958 > Mobile : +91 9884040171 > Support : +91 9962007110 > OC : jothish.chokkalingam > Group mail:- Telstra.psm.tsd.tibco(a)accenture.com > > > > This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. > ______________________________________________________________________________________ > > www.accenture.com > > > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > > > > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Help in setting stunnel in server mode to over come TLSV2 compatibility
by jothish.chokkalingam＠accenture.com 24 Nov '16

24 Nov '16

HI all, There is a problem we have currently connecting tibco client to SFDC sever via TLS v1.2 and that's solved by using stunnel in client mode. And the communication from SFDC client to tibco server applications w.r.t TLS V1.2 I am unable to solve using stunnel. Below is the configuration in stunnel in server end to divert the traffic from 8008 to 8009, can you help here with the logs is the stunnel configuration is correct or there any missed/need to alter. [SFDC reverse proxy test] debug=7 ;client = yes accept = 8008-->port used by sfdc client to connect to TIBCO server connect = localhost:8009 -->Tibco server that's running cert = stunnel.pem 2016.11.23 08:31:56 LOG7[118]: Service [SFDC reverse proxy test] started 2016.11.23 08:31:56 LOG7[118]: Option TCP_NODELAY set on local socket 2016.11.23 08:31:56 LOG5[118]: Service [SFDC reverse proxy test] accepted connection from 101.167.198.14:54477 2016.11.23 08:31:56 LOG6[118]: Peer certificate not required 2016.11.23 08:31:56 LOG7[118]: SSL state (accept): before/accept initialization 2016.11.23 08:31:56 LOG3[118]: SSL_accept: Peer suddenly disconnected 2016.11.23 08:31:56 LOG5[118]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2016.11.23 08:31:56 LOG7[118]: Local descriptor (FD=696) closed 2016.11.23 08:31:56 LOG7[118]: Service [SFDC reverse proxy test] finished (0 left) PFB the openssl snap shot looks odd C:\Program Files (x86)\stunnel\bin>openssl s_client -connect localhost:8008 -prexit -showcerts WARNING: can't open config file: /devel/win32/openssl/openssl.cnf CONNECTED(0000016C) Thanks and Regards, Jothish TIBCO TSD Ph. : +91 44 39263958 Mobile : +91 9884040171 Support : +91 9962007110 OC : jothish.chokkalingam Group mail:- Telstra.psm.tsd.tibco(a)accenture.com ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com

4 4

uninstall.exe
by Michael Curran 22 Nov '16

22 Nov '16

With the distrubuted version of stunnel, there is an uninstall.exe Are there any options for this uninstaller, so I can automate removal and upgrade processes ? Like a /quiet or /Q ?? Which uninstaller application is this based off of?

1 0

Connection failure on IPv4-only box with IPv6-address in RR DNS record
by Michael Weiser 18 Nov '16

18 Nov '16

Hi, the server I connect to using stunnel has just been upgraded to IPv6. In the process an AAAA record was added to its DNS entry. The box I run stunnel on is IPv4-only, meaning, the kernel does not have any IPv6 support at all. The DNS stub resolver is still looking for AAAA records though. Consequently stunnel connections now fail about half of the time with error: 2016.11.18 20:10:57 LOG3[ui]: remote socket: Address family not supported by protocol (97) >From looking at client.c I can see that stunnel supports trying all target addresses in turn but will bail if the socket cannot be created: for(ind_try=0; ind_try<c->connect_addr.num; ind_try++) { c->fd=s_socket(c->connect_addr.addr[ind_cur].sa.sa_family, SOCK_STREAM, 0, 1, "remote socket"); if(c->fd==INVALID_SOCKET) longjmp(c->err, 1); [...] if(s_connect(c, &c->connect_addr.addr[ind_cur], [...] continue; /* next IP */ } [...] return fd; /* success! */ So I guess the problem would go away if I enabled IPv6 in the kernel of my client box: s_socket() would succeed but connect() would fail with ENETUNREACH. But couldn't stunnel just continue with the next IP if s_socket() failed with EAFNOSUPPORT? -- Thanks, Michael

1 0

Deactivate expiry date check, Have CA check with verify = 3
by Mark Shine 18 Nov '16

18 Nov '16

Hello, I would like to setup stunnel but the certificate from my other tunnel is expired. How would I tell stunnel to ignore verification of expiry date of the certificate coming from stunnel client mode to the stunnel server mode? I want to be able to verify the certificate but ignore the expiry date. Not disable cert check all the way I have a stunnel setup by someone else that has done this exact thing but I have no clue how they did it. Stunnel seems to use openssl for the verification so I guess the question should be how to bypass openssl expiry check. Please see the below link for my issue on stackexchange. http://unix.stackexchange.com/questions/323997/stunnel-how-to-ignore-the-ce… [http://cdn.sstatic.net/Sites/unix/img/apple-touch-icon@2.png?v=32fb07f7ce26…]<http://unix.stackexchange.com/questions/323997/stunnel-how-to-ignore-the-ce…> Stunnel: How to ignore the cert expiry date<http://unix.stackexchange.com/questions/323997/stunnel-how-to-ignore-the-ce…> unix.stackexchange.com I would like to setup stunnel but the certificate from my other tunnel is expired. How would I tell stunnel to ignore verification of expiry date of the certificate coming from stunnel client mode ...

1 0