- stunnel-users - stunnel.org

Passing client IP via stunned to HAProxy
by Ashok Kumar Agrawal 07 Aug '23

07 Aug '23

Hi, Our setup has stunnel and HAproxy running on same server. Our clients (postgresql clients) connect to port where stunnel is listening. Clients are sending encrypted data (setting sslmode=require in pgsql connection options). Stunnel listens to encrypted traffic and writes unencrypted traffic to another port on same host where HAproxy is listening. Then, HAProxy passes this request to one of many postgresql servers. These servers are custom written to implement postgresql protocol. We want IP of the postgresql clients to be captured at the server. HAProxy documentation says that proxy protocol is only way to pass original client IP for non-http traffic. Can you please suggest how we can configure Stunnel to listen to encrypted postgresql client traffic (pgsql protocol) and write unencrypted data to HAProxy instance in proxy protocol. Following are our current configurations for stunnel and HAProxy: Stunnel: foreground = yes debug = 5 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 socket = l:SO_KEEPALIVE=1 socket = l:TCP_KEEPIDLE=120 socket = l:TCP_KEEPINTVL=30 socket = l:TCP_KEEPCNT=3 ciphers = HIGH:MEDIUM [postgres-serverB] protocol = pgsql accept = 0.0.0.0:3255 connect = localhost:5433 retry = yes cert = /etc/stunnel/stunnel.crt delay = no sslVersion = TLSv1.2 HAProxy: listen pgsql mode tcp option tcplog bind *:5433 balance leastconn timeout server 1d timeout client 1d option tcp-check option clitcpka server qspgsqlsvr1 host.docker.internal:5432 check Thanks, Ashok

1 0

Oqsprovider support with Openssl 3,x
by mukesh.kochu＠yahoo.com 01 Aug '23

01 Aug '23

hello Team, Anybody knows how to plugin the provider included in the openssl 3.x , to be supported with stunnel , by doing any configuration change or so . To give you guys a background , I compiled a openssl 3.x version and and then compiled liboqs , and build the ops provider support in the openssl 3.x .following the below link. https://github.com/open-quantum-safe/oqs-provider I was under the impression tunnel might support all algorithm which is supported in the openssl version which is used to build the stunnel So I rebuild the same using the pqc supported openssl , but unfortunately not sure how to consume the provider there and or what to be tweaked in he tunnel source code that multiple providers or algorithms will be supported or not . or is it not possible to achieve this without doing a massive source code change ? Appreciate any help on this Regards Mukesh

1 0

can not send
by wizardm＠gmx.de 21 Jul '23

21 Jul '23

hello, I have accounts with gmx, aol and 1&1 (ionos). with gmx and aol I can receive and send. but with 1&1 I can only receive. the stunnel log says "SSL_connect: ssl/record/ssl3_record.c:354: error:0A00010B:SSL routines::wrong version number". in the log of the mail program there is an "error - Unexpected connection termination. Connection lost." what can I do? here is my configuration. [gmx-pop3] client = yes accept = 127.0.0.1:110 connect = pop.gmx.net:995 verifyChain = yes CAfile = ca-certs.pem checkHost = pop.gmx.net OCSPaia = yes [gmx-smtp] client = yes accept = 127.0.0.1:25 connect = mail.gmx.net:465 verifyChain = yes CAfile = ca-certs.pem checkHost = mail.gmx.net OCSPaia = yes [aol-pop3] client = yes accept = 127.0.0.1:10110 ; protocol = pop3 connect = pop.aol.com:995 verifyChain = yes CAfile = ca-certs.pem checkHost = pop.aol.com OCSPaia = yes [aol-smtp] client = yes accept = 127.0.0.1:10025 ; protocol = smtp connect = smtp.aol.com:465 verifyChain = yes CAfile = ca-certs.pem checkHost = smtp.aol.com OCSPaia = yes [1und1-pop3] client = yes accept = 127.0.0.1:1110 connect = pop.ionos.de:995 verifyChain = yes CAfile = ca-certs.pem checkHost = pop.ionos.de OCSPaia = yes [1und1-smtp] client = yes accept = 127.0.0.1:1111 connect = smtp.ionos.de:587 verifyChain = yes CAfile = ca-certs.pem checkHost = smtp.ionos.de OCSPaia = yes thank you very much

1 0

“latest” alias
by David Richard (CajunD) 16 Jul '23

16 Jul '23

Hi Folks, I have found some older discussions about keeping archives and such, but wanted to ask if you could create an alias that always pointed to the latest version. We were hard-linking to a version in /downloads/ and when version 5.69 was removed a few days ago, some automation on our end broke and (as a result of circumstance) caused an outage while we were trying to fix another problem with a remote dependency. We have altered our script to point to the archive version and added checking to ensure any future problems are handled properly. That being said, we will always want the latest version of your software when we build our machine images. And while you do send an announcement, we have to take additional action on our end to get that new version. A “latest” link would allow us to get the latest version automatically when we perform security updates. Thanks for considering this request. David. --- David Richard cajund(a)gmail.com

4 3

securityLevel doesn't work with OpenSSL 3.0
by Yasuhiro Kimura 14 Jul '23

14 Jul '23

Hello, I'd like to use stunnel to acccess SMTP server that has following configuration parameters. Host: smtp.example.org Port number: smtps (465) Encryption method: SMTP over TLS At first I created following configuration file and run stunnel 5.70 with it on FreeBSD 13.2-RELEASE. ---------------------------------------------------------------------- CApath=/home/yasu/.certs client=yes foreground=yes syslog=no verify=2 [12345] accept=localhost:12345 checkHost=smtp.examle.org connect=smtp.examle.org:465 ---------------------------------------------------------------------- But unfortunately stunnel emits following messages and local-side connection.is closed when I connect to 12345 port of localhost. ---------------------------------------------------------------------- 2023.07.14 12:29:12 LOG5[0]: Service [12345] accepted connection from ::1:14632 2023.07.14 12:29:12 LOG5[0]: s_connect: connected 10.0.0.1:465 2023.07.14 12:29:12 LOG5[0]: Service [12345] connected remote server from 192.168.0.1:14633 2023.07.14 12:29:12 LOG5[0]: Certificate accepted at depth=0: C=JP, ST=Tokyo, L=Ohta-Ku, O=EXAMLE.INC, CN=smtp.examle.org 2023.07.14 12:29:12 LOG3[0]: SSL_connect: /usr/src/crypto/openssl/ssl/t1_lib.c:1146: error:1414D172:SSL routines:tls12_check_peer_sigalg:wrong signature type 2023.07.14 12:29:12 LOG5[0]: Connection closed/reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket ---------------------------------------------------------------------- So I added setting of securityLevel as following. ---------------------------------------------------------------------- CApath=/home/yasu/.certs client=yes foreground=yes securityLevel=1 syslog=no verify=2 [12345] accept=localhost:12345 checkHost=smtp.examle.org connect=smtp.examle.org:465 ---------------------------------------------------------------------- And now I can successfully access to STMP server through stunnel. Next, I also tried it on FreeBSD 14-CURRENT and surprisingly stunnel 5.70 emits following messages even if 'securityLevel=1' is specified in configuration file. ---------------------------------------------------------------------- 2023.07.14 12:31:12 LOG5[0]: Service [12345] accepted connection from ::1:10838 2023.07.14 12:31:12 LOG5[0]: s_connect: connected 10.0.0.1:465 2023.07.14 12:31:12 LOG5[0]: Service [12345] connected remote server from 192.168.0.11:41449 2023.07.14 12:31:12 LOG3[0]: SSL_connect: /usr/src/crypto/openssl/ssl/statem/extensions.c:894: error:0A000152:SSL routines::unsafe legacy renegotiation disabled 2023.07.14 12:31:12 LOG5[0]: Connection closed/reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket ---------------------------------------------------------------------- So I also tried on 2 other platforms. a. Cygwin's stunnel.exe (version 5.69) b. tstunnel.exe installed by useing stunnel-5.69-win64-installer.exe And result is that the former works fine and the latter emits same message as FreeBSD 14-CURRENT. According to these result it seems the failure is related to the version of OpenSSL. That is, while FreeBSD 13.2-RELEASE and Cygwin use OpenSSL 1.1.1, FreeBSD 14-CURRENT and stunnel-5.69-win64-installer.exe use OpenSSL 3.0. So does this mean securityLevel option doesn't work with OpenSSL 3.0? Regards. --- Yasuhiro Kimura

2 1

Stunnel is not accepting TLS1.1 anymore?
by Bohnig＠gmx.de 13 Jul '23

13 Jul '23

Hi there, i have a problem (maybe with understanding) with stunnel. I'm using the newest version 5.70 but had this also with 5.66 and 5.69. My goal was to access an Exchange server IIS (on port 443, which understands only TLS1.1 and below) with TLS1.2 and upper. I was able to achieve this with the following config --------------------------- debug = 7 output = stunnel.log [Exserver] accept = 441 connect = 442 cert = stunneldd.pem TIMEOUTclose = 0 [Exclient] client = yes accept = 442 connect = 443 --------------------------- stunneldd.pem i made with openssl req -new -x509 -days 365 -nodes -config openssl.cnf -out stunneldd.pem -keyout stunneldd.pem This is working so far. My problem is, stunnel is no longer accepting TLS1.0 and TLS1.1. I need this for some clients which couldn't talk TLS1.2. But why? All infos i could find (and this was days, not hours) are showing that it should work. Even with the added line sllVerison = all or sslVersionMin = TLSv1 sslVersionMax = TLSv1.3 it ws not accepting TLS1 queries. My steps to confirm this: ------------------------- - install stunnel 5.70 - take the config shown above - make a cert with openssl req -new -x509 -days 365 -nodes -config openssl.cnf -out stunneldd.pem -keyout stunneldd.pem - start stunnel - test it with openssl s_client -connect localhost:441 -tls1_1 -debug stunnel log: ------------ 2023.07.13 09:53:04 LOG7[25]: TLS alert (write): fatal: internal error 2023.07.13 09:53:04 LOG3[25]: SSL_accept: ssl/t1_lib.c:3342: error:0A000076:SSL routines::no suitable signature algorithm I'm thinking, that the bind OpenSSL doesn't support TLS1.1 anymore but the [Exclient] which is talking to Port 443 uses TLS1.1. Or has the cert anything to do with it. I think no, because the andshake failed and that is befor the cert is used? What I'm missing? I want stunnel to accept TLs1.0, TLS1.1. TLS1.2 and upwards on the same port. Would be nice if anybody could help me with this? Many thanks.

1 0

Default destination folder of stunnel-*-win64-installer.exe
by Yasuhiro Kimura 13 Jul '23

13 Jul '23

Hello, If you install stunnel on Windows with stunnel-*-win64-installer.exe, it installs everything under "C:\Program Files (x86)\stunnel" by default. But since it installs 64bit binaries, should default destination folder be "C:\Program Files\stunnel"? Regards.

1 0

`tstunnel -(help|options|version)` outputs garbase with 5.70
by Yasuhiro Kimura 13 Jul '23

13 Jul '23

Hello, With tstunnel.exe installed with stunnel-5.70-win64-installer.exe, `tstunnel -help', `tstunnel -options` and `tstunnel -version` output gabases. The issue doesn't happen with either stunnel 5.70 on Unix or tstunnel.exe installed with stunnel-5.69-win64-installer.exe. Regards. --- Yasuhiro Kimura

1 0

stunnel 5.70 released
by Michal Trojnara 12 Jul '23

12 Jul '23

Dear Users, I have released version 5.70 of stunnel. ### Version 5.70, 2023.07.12, urgency: HIGH * Security bugfixes - OpenSSL DLLs updated to version 3.0.9. - OpenSSL FIPS Provider updated to version 3.0.8. * Bugfixes - Fixed TLS socket EOF handling with OpenSSL 3.x. This bug caused major interoperability issues between stunnel built with OpenSSL 3.x and Microsoft's Schannel Security Support Provider (SSP). - Fixed reading certificate chains from PKCS#12 files. * Features - Added configurable delay for the "retry" option. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 7bbc7b9e9a988d76301325db4c110ec360a98ffb8a221c7accbff9c0a8bae2f3 stunnel-5.70.tar.gz c50fb79329ddbf095e65ba8817a0249188aa5b25f15557f8504d8f65876034d9 stunnel-5.70-win64-installer.exe df87f71596ddd8730a5394fd3795b32689664816c0aa87e206e94fdab540f672 stunnel-5.70-android.zip Best regards, Mike

1 0

Cannot open PSKsecrets file
by trashrap22＠gmail.com 11 Jul '23

11 Jul '23

Hi, I am setting up stunnel on my Windows 10 PC, but must be missing something small with the error I am getting: [ ] Initializing inetd mode configuration [ ] Running on Windows 6.2 [ ] No limit detected for the number of clients [.] stunnel 5.69 on x64-pc-mingw32-gnu platform [.] Compiled/running with OpenSSL 3.0.8 7 Feb 2023 [.] Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,OCSP,PSK,SNI [ ] errno: (*_errno()) [ ] Initializing inetd mode configuration [ ] Running on Windows 6.2 [.] Reading configuration from file C:\Program Files (x86)\stunnel\config\stunnel.conf [.] UTF-8 byte order mark detected [.] FIPS mode disabled [ ] Compression disabled [ ] No PRNG seeding was required [ ] Initializing service [Sql_Secure_Trek-<port>] [!] Cannot open PSKsecrets file [!] C:\Program Files (x86)\stunnel\config\stunnel.conf:68: "PSKsecrets = "C:\Program Files (x86)\stunnel\config\pskSql.txt"": Failed to read PSK secrets [!] Configuration failed [ ] Deallocating temporary section defaults [ ] Deallocating section [Sql_Secure_Trek-<port>] Server is down Here is my .conf file: ;Global settings: debug = 7 output = stunnel.log sslVersion = all sslVersionMin = TLSv1.2 sslVersionMax = TLSv1.2 [Sql_Secure_Trek-<port>] client = yes accept = 0.0.0.0:<port> connect = <IP>:<port> ciphers = PSK PSKsecrets = "C:\Program Files (x86)\stunnel\config\pskSql.txt" Any ideas?

1 1

stunnel 5.57 crashed while trying to write logs
by phananh.nguyen＠dxc.com 06 Jul '23

06 Jul '23

it crashed at the function log_raw. here is the backtrace == Backtrace #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:49 #1 0x0000007f82ed54b4 in __GI_abort () at abort.c:79 #2 0x0000007f82f1f984 in __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7f82fdc660 "%s\n") at ../sysdeps/posix/libc_fatal.c:155 #3 0x0000007f82f273dc in malloc_printerr (str=str@entry=0x7f82fd7bc8 "corrupted double-linked list") at malloc.c:5389 #4 0x0000007f82f27cc8 in unlink_chunk (p=p@entry=0x7f64012260, av=0x7f64000020) at malloc.c:1472 #5 0x0000007f82f27e48 in malloc_consolidate (av=av@entry=0x7f64000020) at malloc.c:4539 #6 0x0000007f82f29df0 in _int_malloc (av=av@entry=0x7f64000020, bytes=bytes@entry=8192) at malloc.c:3727 #7 0x0000007f82f2c5b0 in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3448 #8 0x0000007f82f1e41c in __GI___open_memstream (bufloc=bufloc@entry=0x7f72ffc3f8, sizeloc=sizeloc@entry=0x7f72ffc400) at memstream.c:83 #9 0x0000007f82f7d274 in __vsyslog_internal (pri=31, pri@entry=7, fmt=fmt@entry=0x5584b5f930 "%s: %s", ap=..., mode_flags=mode_flags@entry=2) at ../misc/syslog.c:181 #10 0x0000007f82f7d810 in __syslog_chk (pri=pri@entry=7, flag=flag@entry=1, fmt=fmt@entry=0x5584b5f930 "%s: %s") at ../misc/syslog.c:136 #11 0x0000005584b45884 in syslog (__fmt=0x5584b5f930 "%s: %s", __pri=7) at /usr/include/bits/syslog.h:31 #12 log_raw (level=level@entry=7, stamp=stamp@entry=0x7f64003420 "2023.06.16 01:36:58", id=id@entry=0x7f64001120 "LOG7[19]", text=text@entry=0x7f6401b060 "Service [proxy-r] started", opt=<optimized out>, opt=<optimized out>) at ../../stunnel-5.57/src/log.c:263 #13 0x0000005584b45b88 in s_log (level=level@entry=7, format=format@entry=0x5584b5a780 "Service [%s] started") at ../../stunnel-5.57/src/log.c:192 #14 0x0000005584b454e8 in client_main (c=c@entry=0x7f82e30060) at ../../stunnel-5.57/src/client.c:178 #15 0x0000005584b45658 in client_thread (arg=0x7f82e30060) at ../../stunnel-5.57/src/client.c:130 #16 0x0000007f83026e64 in start_thread (arg=0x7fc21e457f) at pthread_create.c:463 #17 0x0000007f82f815dc in thread_start () at ../sysdeps/unix/sysv/linux/aarch64/clone.S:78 == Thread apply all backtrace full

2 4

Using URL Subfolders to redirect traffic to a different service?
by hellmanandrew＠comcast.net 02 Jul '23

02 Jul '23

I want to be able to actually use stunnel as a reverse proxy by running everything through one port. How I want to do that is by using subfolders in a URL like: webpage.net/service1 webpage.net/service2 Basically, every subfolder will redirect to a different IP address or port offered by a server. Just not sure how I should configure this.

1 0

help
by Seray Tokadli 26 Jun '23

26 Jun '23

Hello, I am trying to configure stunnel on windows (version 5.69) I am using the capi engine with below conf. I am sending the logs to logstash and not sure if it is working or not. My questions are: 1) I dont see anything in the log after initializing the service. When it sends the logs through stunnel, should i see an entry in the logs? 2) When using capi engine, should i limit the ssl version still ? in your website i see that the tls version supposed to be limited but is it an old info? 3) in your website again it mentions that i should specify the security level to zero for capi engine, is it also a valid info? if yes, do i need to set it in global section or service level? https://www.stunnel.org/config_windows.html fips = yes taskbar = yes engine = capi output = C:\Logs\stunnel\stunnel.log debug = debug [logging_service_for_filebeat] engineId = capi client = yes accept = {{ stunnel_logging_port_filebeat }} delay = yes connect = {{ logstash_vip }}:{{ stunnel_logging_port_filebeat }} ciphers = ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256 sessionCacheSize = 5000 sessionCacheTimeout = 300 socket = l:TCP_NODELAY=1 # the only FIPS 140-2 compliant protocol sslVersion = TLSv1.2 CApath = <ca path> verifyChain = yes checkHost = <ca host> verify = 2 Log: 023.06.26 14:37:39 LOG6[service]: Initializing inetd mode configuration 2023.06.26 14:37:39 LOG7[service]: Running on Windows 6.2 2023.06.26 14:37:39 LOG7[service]: No limit detected for the number of clients 2023.06.26 14:37:39 LOG5[service]: stunnel 5.69 on x64-pc-mingw32-gnu platform 2023.06.26 14:37:39 LOG5[service]: Compiled/running with OpenSSL 3.0.8 7 Feb 2023 2023.06.26 14:37:39 LOG5[service]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2023.06.26 14:37:39 LOG7[service]: errno: (*_errno()) 2023.06.26 14:37:39 LOG6[service]: Initializing inetd mode configuration 2023.06.26 14:37:39 LOG7[service]: Running on Windows 6.2 2023.06.26 14:37:39 LOG5[service]: Reading configuration from file C:\Program Files (x86)\stunnel\config\stunnel.conf 2023.06.26 14:37:39 LOG5[service]: UTF-8 byte order mark not detected 2023.06.26 14:37:39 LOG7[service]: Enabling support for engine "capi" 2023.06.26 14:37:39 LOG6[service]: Logging not supported by engine #1 (capi) 2023.06.26 14:37:39 LOG6[service]: UI not supported by engine #1 (capi) 2023.06.26 14:37:39 LOG7[service]: Initializing engine #1 (capi) 2023.06.26 14:37:39 LOG6[service]: Engine #1 (capi) initialized 2023.06.26 14:37:39 LOG5[service]: FIPS provider enabled 2023.06.26 14:37:39 LOG5[service]: FIPS mode enabled 2023.06.26 14:37:39 LOG6[service]: Compression disabled 2023.06.26 14:37:39 LOG7[service]: No PRNG seeding was required 2023.06.26 14:37:39 LOG6[service]: Initializing service [logging_service_for_filebeat] 2023.06.26 14:37:39 LOG6[service]: stunnel default security level set: 2 2023.06.26 14:37:39 LOG7[service]: Ciphers: ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256 2023.06.26 14:37:39 LOG7[service]: TLSv1.3 ciphersuites: TLS_AES_256_GCM_SHA384:TLS_AES_128_GCM_SHA256:TLS_CHACHA20_POLY1305_SHA256 2023.06.26 14:37:39 LOG7[service]: TLS options: 0x2100000 (+0x0, -0x0) 2023.06.26 14:37:39 LOG6[service]: Session resumption enabled 2023.06.26 14:37:39 LOG6[service]: Client certificate engine (capi) enabled 2023.06.26 14:37:39 LOG7[service]: No certificate or private key specified 2023.06.26 14:37:39 LOG6[service]: Configured trusted server CA:xxx 2023.06.26 14:37:39 LOG6[service]: Configured trusted server CA:xxx 2023.06.26 14:37:39 LOG6[service]: Configured trusted server CA: xxx 2023.06.26 14:37:39 LOG6[service]: DH initialization skipped: client section 2023.06.26 14:37:39 LOG7[service]: ECDH initialization 2023.06.26 14:37:39 LOG7[service]: ECDH initialized with curves X25519:P-256:X448:P-521:P-384 2023.06.26 14:37:39 LOG6[service]: Initializing service [logging_service_for_winlogbeat] 2023.06.26 14:37:39 LOG6[service]: stunnel default security level set: 2 2023.06.26 14:37:39 LOG7[service]: Ciphers: ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256 2023.06.26 14:37:39 LOG7[service]: TLSv1.3 ciphersuites: TLS_AES_256_GCM_SHA384:TLS_AES_128_GCM_SHA256:TLS_CHACHA20_POLY1305_SHA256 2023.06.26 14:37:39 LOG7[service]: TLS options: 0x2100000 (+0x0, -0x0) 2023.06.26 14:37:39 LOG6[service]: Session resumption enabled 2023.06.26 14:37:39 LOG6[service]: Client certificate engine (capi) enabled 2023.06.26 14:37:39 LOG7[service]: No certificate or private key specified 2023.06.26 14:37:39 LOG6[service]: Configured trusted server CA: xxx 2023.06.26 14:37:39 LOG6[service]: Configured trusted server CA: xxx 2023.06.26 14:37:39 LOG6[service]: Configured trusted server CA: xxx 2023.06.26 14:37:39 LOG6[service]: DH initialization skipped: client section 2023.06.26 14:37:39 LOG7[service]: ECDH initialization 2023.06.26 14:37:39 LOG7[service]: ECDH initialized with curves X25519:P-256:X448:P-521:P-384 2023.06.26 14:37:39 LOG5[service]: Configuration successful 2023.06.26 14:37:39 LOG7[service]: Deallocating deployed section defaults 2023.06.26 14:37:39 LOG7[service]: Binding service [logging_service_for_filebeat] 2023.06.26 14:37:39 LOG7[service]: Listening file descriptor created (FD=632) 2023.06.26 14:37:39 LOG7[service]: Setting accept socket options (FD=632) 2023.06.26 14:37:39 LOG7[service]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2023.06.26 14:37:39 LOG6[service]: Service [logging_service_for_filebeat] (FD=632) bound to 0.0.0.0:10300 2023.06.26 14:37:39 LOG7[service]: Binding service [logging_service_for_winlogbeat] 2023.06.26 14:37:39 LOG7[service]: Listening file descriptor created (FD=648) 2023.06.26 14:37:39 LOG7[service]: Setting accept socket options (FD=648) 2023.06.26 14:37:39 LOG7[service]: Option SO_EXCLUSIVEADDRUSE set on accept socket 2023.06.26 14:37:39 LOG6[service]: Service [logging_service_for_winlogbeat] (FD=648) bound to 0.0.0.0:10301 2023.06.26 14:37:39 LOG6[service]: Accepting new connections 2023.06.26 14:37:39 LOG7[per-second]: Per-second thread initialized 2023.06.26 14:37:39 LOG7[per-day]: Per-day thread initialized 2023.06.26 14:37:39 LOG6[per-day]: Executing per-day jobs 2023.06.26 14:37:39 LOG6[per-day]: Per-day jobs completed in 0 seconds 2023.06.26 14:37:39 LOG7[per-day]: Waiting 86400 seconds -- Seray TOKADLI KILIÇ +420778116052

1 0

stunnel application in windows 2016 server
by noel.melvin＠tcs.com 21 Jun '23

21 Jun '23

Hi All, Please anyone know the answer, its very urgent. 1. stunnel log file are not capturing any events. (It was working before the server reboot 2 days earlier). 2. When we open stunnel.exe getting message as "server is down". Anything else apart from stunnel.conf file is located in the config folder and it was working prior to the server reboot. the only change we did was replaced a pem & .key files in c:\programfilesx86\stunnel\config and then server was rebooted. since then the events are not getting captured in d:\stunnellogs\stunnel.log file. Also how to verify the stunnel functionality till then

2 7

help configuring stunnel with ssl ceritificate
by Andrei 20 Jun '23

20 Jun '23

Hello! I'm trying to configure stunnel with an ssl certificate. I have the certificate (.p12 format) from the site owners, installed it in the Personal folder of the current user and local machine. Before installing stunnel I had to select the certificate in the browser when accessing the site. With this configuration [sts] client = yes accept = 127.0.0.1:42354 connect = y7m2zq.its:443 key = E:\!Work\ cert_.pem CAfile = E:\!Work\ cert_.pem verify=0 the stunnel starts but I get a `No required SSL certificate was sent`when accessing from the browser. If I use this config [sts] client = yes accept = 127.0.0.1:42354 connect = y7m2zq.its:443 cert = E:\!Work\cert_.p12 key = E:\!Work\cert_.pem CAfile = E:\!Work\cert_.pem verify=0 the stunnel will not start PKCS12_parse: crypto/evp/evp_fetch.c:373: error:0308010C:digital envelope routines::unsupported LOG3[main]: Service [sts]: Failed to initialize TLS context Please help. I would like to be able to open the site without choosing the certificate. Thank you!

2 1

stunnel application in windows 2016 server
by noel.melvin＠tcs.com 20 Jun '23

20 Jun '23

Hi All, Please anyone know the answer, its very urgent. 1. stunnel log file are not capturing any events. (It was working before the server reboot 2 days earlier). 2. When we open stunnel.exe getting message as "server is down". Anything else apart from stunnel.conf file is located in the config folder and it was working prior to the server reboot. the only change we did was replaced a pem & .key files in c:\programfilesx86\stunnel\config and then server was rebooted. since then the events are not getting captured in d:\stunnellogs\stunnel.log file. Also how to verify the stunnel functionality till then

1 0

stunnel application in windows 2016 server
by noel.melvin＠tcs.com 20 Jun '23

20 Jun '23

Hi All, Please anyone know the answer, its very urgent. 1. stunnel log file are not capturing any events. (It was working before the server reboot 2 days earlier). 2. When we open stunnel.exe getting message as "server is down". Anything else apart from stunnel.conf file is located in the config folder and it was working prior to the server reboot. the only change we did was replaced a pem & .key files in c:\programfilesx86\stunnel\config and then server was rebooted. since then the events are not getting captured in d:\stunnellogs\stunnel.log file. Also how to verify the stunnel functionality till then

1 0

stunnel application in windows 2016 server
by noel.melvin＠tcs.com 20 Jun '23

20 Jun '23

Hi All, Please anyone know the answer, its very urgent. 1. stunnel log file are not capturing any events. (It was working before the server reboot 2 days earlier). 2. When we open stunnel.exe getting message as "server is down". Anything else apart from stunnel.conf file is located in the config folder and it was working prior to the server reboot. the only change we did was replaced a pem & .key files in c:\programfilesx86\stunnel\config and then server was rebooted. since then the events are not getting captured in d:\stunnellogs\stunnel.log file. Also how to verify the stunnel functionality till then

1 0

Inbound and outbound connection on same PC?
by trashrap22＠gmail.com 15 Jun '23

15 Jun '23

Hi, I have a linux PC that now successfully runs a stunnel client connection with a remote server. I now want to be able to access sql server on that linux PC from a remote Windows PC. What I would like to gather information on: 1. Can the client configuration of stunnel on the linux PC be used for a second connection from the remote windows PC to access data (sql server)? 2. Thus, what differentiates a client from a server - a server can have multiple connections and provides data? A client can't? 3. What is the correct route I should take? Regards,

3 3

Reading HSM Pincode from file and passing it to Stunnel/OpenSSL
by Andreas Heijdendael 30 May '23

30 May '23

Hi there, I'm running into an issue. I'm trying to run stunnel on my new Ubuntu 22.04 system whereas before I was running it on Windows. Thing is, on the Windows system I had to compile stunnel manually as I need to read an encrypted file on the filesystem that contains the user-pin for my HSM. On Windows, that worked. On Ubuntu I'm having issues with the C11 _s functions (like sscanf_s and the likes). ChatGTP suggested using clang compiler, but I have not clue on how to do that. Of enabling C11 Annex K support in Ubuntu (no such thing, apparently).... Is there anybody here that makes use of these _s functions in their code on Ubuntu 22.04? Or explain how to use these functions in gcc? Or compile stunnel (+ additional code) using Clang. Thanks!! Andreas

1 0

ssl3 wrong version number
by trashrap22＠gmail.com 18 May '23

18 May '23

I get the following error running 'sudo service stunnel4 status' : LOG3[0]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number is that merely a mismatch between openSSL versions used by client and server? I have tried changing the config file options, also with no specification since the default according to stunnel.org is: options = NO_SSLv2 options = NO_SSLv3 I have tried (service level option): sslVersion = TLSv1 Same error. When running sudo service stunnel4 status after start: May 12 08:22:45 user-Linux stunnel[16630]: LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP May 12 08:22:45 user-Linux stunnel4[16616]: Starting TLS tunnels: /etc/stunnel/stunnel.conf: started May 12 08:22:45 user-Linux stunnel[16630]: LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.conf May 12 08:22:45 user-Linux systemd[1]: Started LSB: Start or stop stunnel 4.x (TLS tunnel for network daemons). May 12 08:22:45 user-Linux stunnel[16630]: LOG5[ui]: UTF-8 byte order mark not detected May 12 08:22:45 user-Linux stunnel[16630]: LOG5[ui]: FIPS mode disabled May 12 08:22:45 user-Linux stunnel[16630]: LOG4[ui]: Insecure file permissions on /var/lib/stunnel4/psk.txt May 12 08:22:45 user-Linux stunnel[16630]: LOG5[ui]: Configuration successful May 12 08:22:45 user-Linux stunnel[16630]: LOG5[ui]: Switched to chroot directory: /var/lib/stunnel4/ May 12 08:22:45 user-Linux stunnel[16632]: LOG5[cron]: Updating DH parameters After trying to make a connection via FIX connection: May 12 08:28:04 user-Linux stunnel[16798]: LOG7[0]: Service [**redacted**] started May 12 08:28:04 user-Linux stunnel[16798]: LOG7[0]: Setting local socket options (FD=3) May 12 08:28:04 user-Linux stunnel[16798]: LOG7[0]: Option TCP_NODELAY set on local socket May 12 08:28:04 user-Linux stunnel[16798]: LOG5[0]: Service [**redacted**] accepted connection from 127.0.0.1:51954 May 12 08:28:04 user-Linux stunnel[16798]: LOG6[0]: Peer certificate not required May 12 08:28:04 user-Linux stunnel[16798]: LOG7[0]: TLS state (accept): before SSL initialization May 12 08:28:04 user-Linux stunnel[16798]: LOG3[0]: SSL_accept: ../ssl/record/ssl3_record.c:331: error:1408F10B:SSL routines:ssl3_get_record:wrong version number May 12 08:28:04 user-Linux stunnel[16798]: LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket May 12 08:28:04 user-Linux stunnel[16798]: LOG7[0]: Local descriptor (FD=3) closed May 12 08:28:04 user-Linux stunnel[16798]: LOG7[0]: Service [**redacted**] finished (0 left)

2 1

TLS alert (read): warning: close notify
by trashrap22＠gmail.com 18 May '23

18 May '23

Hi All, Hopefully the last question with my struggles! Stunnel connects and the initial TLS connection works - but then it seems the client or server (I am client) does not trust the psk key? Any ideas? Note - part of the previous issue was creating a 64B/512b PSK and NOT a 32/B/256b psk. I created that key and shared it with the server. See below line referencing 256bit encryption? May 18 16:34:38 user-Linux stunnel: LOG5[0]: Service [** redacted **] connected remote server from ** redacted ** May 18 16:34:38 user-Linux stunnel: LOG7[0]: Setting remote socket options (FD=11) May 18 16:34:38 user-Linux stunnel: LOG7[0]: Option TCP_NODELAY set on remote socket May 18 16:34:38 user-Linux stunnel: LOG7[0]: Remote descriptor (FD=11) initialized May 18 16:34:38 user-Linux stunnel: LOG6[0]: SNI: sending servername: ** redacted ** May 18 16:34:38 user-Linux stunnel: LOG6[0]: Peer certificate not required May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): before SSL initialization May 18 16:34:38 user-Linux stunnel: LOG7[0]: Initializing application specific data for session authenticated May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS write client hello May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS write client hello May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS read server hello May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS read server key exchange May 18 16:34:38 user-Linux stunnel: LOG6[0]: Client certificate not requested May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS read server done May 18 16:34:38 user-Linux stunnel: LOG6[0]: PSK client configured for identity "client" May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS write client key exchange May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS write change cipher spec May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS write finished May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS write finished May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS read server session ticket May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS read change cipher spec May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS state (connect): SSLv3/TLS read finished May 18 16:34:38 user-Linux stunnel: LOG7[0]: New session callback May 18 16:34:38 user-Linux stunnel: LOG6[0]: No peer certificate received May 18 16:34:38 user-Linux stunnel: LOG6[0]: Session id: ***** redacted **** May 18 16:34:38 user-Linux stunnel: LOG7[0]: 1 client connect(s) requested May 18 16:34:38 user-Linux stunnel: LOG7[0]: 1 client connect(s) succeeded May 18 16:34:38 user-Linux stunnel: LOG7[0]: 0 client renegotiation(s) requested May 18 16:34:38 user-Linux stunnel: LOG7[0]: 0 session reuse(s) May 18 16:34:38 user-Linux stunnel: LOG6[0]: TLS connected: new session negotiated May 18 16:34:38 user-Linux stunnel: LOG6[0]: TLSv1.2 ciphersuite: ECDHE-PSK-CHACHA20-POLY1305 (256-bit encryption) May 18 16:34:38 user-Linux stunnel: LOG7[0]: Compression: null, expansion: null May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS alert (read): warning: close notify May 18 16:34:38 user-Linux stunnel: LOG6[0]: TLS closed (SSL_read) May 18 16:34:38 user-Linux stunnel: LOG7[0]: Sent socket write shutdown May 18 16:34:38 user-Linux stunnel: LOG6[0]: Read socket closed (readsocket) May 18 16:34:38 user-Linux stunnel: LOG7[0]: Sending close_notify alert May 18 16:34:38 user-Linux stunnel: LOG7[0]: TLS alert (write): warning: close notify May 18 16:34:38 user-Linux stunnel: LOG6[0]: SSL_shutdown successfully sent close_notify alert May 18 16:34:38 user-Linux stunnel: LOG5[0]: Connection closed: 98 byte(s) sent to TLS, 0 byte(s) sent to socket May 18 16:34:38 user-Linux stunnel: LOG7[0]: Remote descriptor (FD=11) closed May 18 16:34:38 user-Linux stunnel: LOG7[0]: Local descriptor (FD=3) closed May 18 16:34:38 user-Linux stunnel: LOG7[0]: Service [*redacted*]finished (0 left)

1 0

chroot jail on debian 11 for stunnel steps?
by trashrap22＠gmail.com 11 May '23

11 May '23

Does someone have all the steps in order to setup a chroot jail on debian 11 OS - I have followed [this](https://manpages.debian.org/testing/stunnel4/stunnel.8.en.html) mostly - but think I am going to miss some differences to Debian 11 and go down a rabbit hole. Anyone have done it on Debian 11 care to share the steps?

3 3

Re: stunnel not starting
by Christopher Schultz 10 May '23

10 May '23

Hello, On 5/10/23 00:28, d3rIIIe15ter Tier wrote: > Please advise why you strongly advise running stunnel in a chroot jail? Because: 1. It's insanely easy to do (it literally IS just "chroot=/path/to/jail") and 2. If there is a problem with stunnel (e.g. security issue), the amount of damage an attacker can do is significantly limited -chris > On Tue, May 9, 2023 at 5:59 PM Christopher Schultz > <chris(a)christopherschultz.net <mailto:chris@christopherschultz.net>> wrote: > > Hello, > > On 5/9/23 11:13, d3rIIIe15ter Tier wrote: > > After giving access to var/log/secure/stunnel.log, I now get logs! > > > > There I get the following error: > > > > Cannot create pid file /var/run/stunnel4.pid > > create: Permission denied (13) > > What is the euid of the stunnel process? Does it have access to that > path? Are you using a chroot jail? (You should be.) Does that path > exist > in the chroot jail? Can the stunnel user write to that path? > > -chris > > > On Tue, May 9, 2023 at 4:34 PM d3rIIIe15ter Tier > <trashrap22(a)gmail.com <mailto:trashrap22@gmail.com> > > <mailto:trashrap22@gmail.com <mailto:trashrap22@gmail.com>>> wrote: > > > > You are right... bad mistake. > > > > Now I get: cannot open log file - which I am sure is a > permission > > thing since I need to use sudo to be able to write to that file. > > Any ideas further? > > > > On Tue, May 9, 2023 at 4:21 PM Christopher Schultz > > <chris(a)christopherschultz.net > <mailto:chris@christopherschultz.net> > <mailto:chris@christopherschultz.net > <mailto:chris@christopherschultz.net>>> > > wrote: > > > > Hello, > > > > On 5/9/23 10:17, d3rIIIe15ter Tier wrote: > > > I have tried changing the location to > > > > > > var/log/stunnel4/stunnel.log > > > var/log/stunnel4/stunnelLog > > > var/log/secure/ > > > var/log/secure/stunnel.log > > > etc/stunnel/stunnel.log > > > etc/stunnel/stunnelLog > > > > > > don't know how to fix it yet... > > I don't think the *value* is the problem. The problem is that > > you have > > defined "output" somewhere that isn't valid, such as within a > > specific > > service's section instead of as a global setting. > > > > -chris > > > > > On Tue, May 9, 2023 at 3:54 PM Christopher Schultz > > > <chris(a)christopherschultz.net > <mailto:chris@christopherschultz.net> > > <mailto:chris@christopherschultz.net > <mailto:chris@christopherschultz.net>> > > <mailto:chris@christopherschultz.net > <mailto:chris@christopherschultz.net> > > <mailto:chris@christopherschultz.net > <mailto:chris@christopherschultz.net>>>> wrote: > > > > > > Hello, > > > > > > On 5/9/23 09:40, trashrap22(a)gmail.com > <mailto:trashrap22@gmail.com> > > <mailto:trashrap22@gmail.com > <mailto:trashrap22@gmail.com>> <mailto:trashrap22@gmail.com > <mailto:trashrap22@gmail.com> > > <mailto:trashrap22@gmail.com <mailto:trashrap22@gmail.com>>> > > > wrote: > > > > Hi, I am on Debian - when I run "sudo stunnel > > stunnel.conf" I > > > get the following output: > > > > > > > > [ ] Clients allowed=500 > > > > [.] stunnel 5.56 on x86_64-pc-linux-gnu platform > > > > [.] Compiled with OpenSSL 1.1.1k 25 Mar 2021 > > > > [.] Running with OpenSSL 1.1.1n 15 Mar 2022 > > > > [.] Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD > > > TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP > > > > [ ] errno: (*__errno_location ()) > > > > [.] Reading configuration from file > > /etc/stunnel/stunnel.conf > > > > [.] UTF-8 byte order mark not detected > > > > [.] FIPS mode disabled > > > > [ ] Compression disabled > > > > [ ] No PRNG seeding was required > > > > [!] /etc/stunnel/stunnel.conf:24: "output = > > /tmp/stunnel.log": > > > Specified option name is not valid here > > > > [ ] Deallocating section defaults > > > > > > > > When I run "sudo netstat -tulnp | grep -i > stunnel" I > > also get no > > > output - which means that stunnel is not starting up? > > > > > > The log message seems pretty specific to me. Maybe you > > should fix that? > > > > > > -chris > > > _______________________________________________ > > > stunnel-users mailing list -- > stunnel-users(a)stunnel.org <mailto:stunnel-users@stunnel.org> > > <mailto:stunnel-users@stunnel.org > <mailto:stunnel-users@stunnel.org>> > > > <mailto:stunnel-users@stunnel.org > <mailto:stunnel-users@stunnel.org> > > <mailto:stunnel-users@stunnel.org > <mailto:stunnel-users@stunnel.org>>> > > > To unsubscribe send an email to > > stunnel-users-leave(a)stunnel.org > <mailto:stunnel-users-leave@stunnel.org> > > <mailto:stunnel-users-leave@stunnel.org > <mailto:stunnel-users-leave@stunnel.org>> > > > <mailto:stunnel-users-leave@stunnel.org > <mailto:stunnel-users-leave@stunnel.org> > > <mailto:stunnel-users-leave@stunnel.org > <mailto:stunnel-users-leave@stunnel.org>>> > > > > > _______________________________________________ > > stunnel-users mailing list -- stunnel-users(a)stunnel.org > <mailto:stunnel-users@stunnel.org> > > <mailto:stunnel-users@stunnel.org > <mailto:stunnel-users@stunnel.org>> > > To unsubscribe send an email to > stunnel-users-leave(a)stunnel.org <mailto:stunnel-users-leave@stunnel.org> > > <mailto:stunnel-users-leave@stunnel.org > <mailto:stunnel-users-leave@stunnel.org>> > > > _______________________________________________ > stunnel-users mailing list -- stunnel-users(a)stunnel.org > <mailto:stunnel-users@stunnel.org> > To unsubscribe send an email to stunnel-users-leave(a)stunnel.org > <mailto:stunnel-users-leave@stunnel.org> >

1 0

stunnel not starting
by trashrap22＠gmail.com 09 May '23

09 May '23

Hi, I am on Debian - when I run "sudo stunnel stunnel.conf" I get the following output: [ ] Clients allowed=500 [.] stunnel 5.56 on x86_64-pc-linux-gnu platform [.] Compiled with OpenSSL 1.1.1k 25 Mar 2021 [.] Running with OpenSSL 1.1.1n 15 Mar 2022 [.] Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP [ ] errno: (*__errno_location ()) [.] Reading configuration from file /etc/stunnel/stunnel.conf [.] UTF-8 byte order mark not detected [.] FIPS mode disabled [ ] Compression disabled [ ] No PRNG seeding was required [!] /etc/stunnel/stunnel.conf:24: "output = /tmp/stunnel.log": Specified option name is not valid here [ ] Deallocating section defaults When I run "sudo netstat -tulnp | grep -i stunnel" I also get no output - which means that stunnel is not starting up?

4 7