October 2010 - stunnel-users

Re: [stunnel-users] openssl cross compiling for windows
by Jon Daley 30 Oct '10

30 Oct '10

On Wed, 27 Oct 2010, Jon Daley wrote: > On Wed, 27 Oct 2010, Michal Trojnara wrote: >> Jon Daley wrote: >>>> 3. Cross-compile OpenSSL: >>>> ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared >>>> zlib-dynamic >>>> make >>> And you end up with 3 dlls in the openssl directory? >> >> Not really. Just 2 of them. Zlib is produced in step 2. > Hrm. I wasn't talking about the zlib1.dll. I meant: > ssleay32.dll, libssl32.dll and libeay32.dll. Maybe I got mixed up the names, > and am using one that I don't need. I thought I put them in one at a time, > and waited for Windows to ask me for them, but I'll check again. Ah, yes. I am dumb. I can compile and run it without problems with just the two *eay32 dlls. And we've finally figured out the other bug, where it works on my computer, and not on someone else's. It has to do with ipv6 support, and it didn't go away even after I ./config --disable-ipv6, which that flag is (mostly?) ignored in the windows builds, due to the dynamic LoadLibrary calls. On one computer, stunnel connects on the ipv6 port, but then when running "telnet localhost 7000", it connects via the ipv4 port, and so fails. If we force stunnel to use ipv4 by using 127.0.0.1 instead of localhost, everything works fine. My guess is that his computer is partially/incorrectly configured for ipv6, and so that is the reason for the failure. I'm planning on removing the LoadLibrary calls to force ipv6 to be off, though it'd be nice to not do that, since someday, there will be an ipv6-only network that we'll have to deal with presumably. -- Jon Daley http://jon.limedaley.com ~~ For many people, one of the most frustrating aspects of life is not being to understand other people's behavior. We see them as "guilty" instead of "innocent." -- Unknown

2 2

Re: [stunnel-users] openssl cross compiling for windows
by Jon Daley 27 Oct '10

27 Oct '10

On Wed, 27 Oct 2010, Michal Trojnara wrote: > 1. Install mingw32 tools: > apt-get install mingw32 Yes, I did that. > 2. Cross-compile and install zlib > (see the zlib documentation for details) Yes, I was doing that, but then was leaving it out since I don't need it (AFAIK). > 3. Cross-compile OpenSSL: > ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared > zlib-dynamic > make And you end up with 3 dlls in the openssl directory? > 4. Cross-compile stunnel: > cd src > make stunnel.exe I can compile stunnel.exe fine, I just can't run it, because I don't have all three of the dlls. -- Jon Daley http://jon.limedaley.com ~~ If you do a job too well, you will get stuck with it. -- Slous

2 1

openssl cross compiling for windows
by Jon Daley 27 Oct '10

27 Oct '10

I am trying to compile openssl and stunnel for Win32, using my Debian host. openssl compilation: ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared no-zlib && make The only problem I'm having is that libssl32.dll is not being created. I have the other libssl* files: libssl.a libssl.dll.a libssl.pc So, then I download the precompiled dlls of openssl from here: http://www.slproweb.com/products/Win32OpenSSL.html But, they require an additional vc redistributable, and since it seems like I'm so close, it'd be nice to finish it off the rest of the way. stunnel compiles fine pointing it at the openssl directory, but on run-time, it complains that libssl32.dll can't be found. Thanks. -- Jon Daley http://jon.limedaley.com ~~ There are no traffic jams when you go the extra mile. -- Anonymous

2 1

Stunnel dropping data on binary uploads from most browsers.
by Bill Crowell 16 Oct '10

16 Oct '10

All, I'm hoping that someone can assist with this. I'm using Stunnel on 2 different systems: Mac and FC 13 to front-end my web server for a custom database system. It works flawlessly except for uploading large binary files. The problem comes when trying to upload say a 2.5MB image file. The number of bytes actually transferred to the exec program is usually under 1K or right at about 33K. Using Firefox on Windows works all the time. I can observe the transfer by watching the stunnel.log file. When the data is piped into the openSSL engine, the number of bytes written to socket is being picked up by the exec program and processed so the loss is between the browser and the output side of Stunnel. The message itself is a multi-part message that is not mime-encoded. The part with the image is set in the boundary properly and contains the JPEG binary. (Thanks to HTTPwatch!) My Stunnel Version is: [root@linux log]# stunnel -version stunnel 4.33 on i386-redhat-linux-gnu with OpenSSL 1.0.0a-fips 1 Jun 2010 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!aNULL:!eNULL:!SSLv2 session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none My configuration file on the Linux box is: cert = /etc/stunnel/server.crt key = /etc/stunnel/server.key debug = 7 output = /var/log/stunnel.log ;socket = l:SO_LINGER=1:60 ;socket = r:TCP_NODELAY=1 client = no sslVersion = SSLv3 [https] libwrap = no accept = 443 exec = /usr/qmsys/bin/qm execargs = /usr/qmsys/bin/qm -b7 -quiet -aPAVUK "P.HTTP" options = DONT_INSERT_EMPTY_FRAGMENTS TIMEOUTidle = 30 TIMEOUTbusy = 5 TIMEOUTclose = 0 *** A RANDOM SUCCESSFUL TRANSFER *** 2010.10.15 10:03:12 LOG7[946:3078133552]: Service https accepted FD=0 from 24.171.161.99:1998 2010.10.15 10:03:12 LOG7[946:3078241136]: Service https started 2010.10.15 10:03:12 LOG7[946:3078241136]: FD=0 in non-blocking mode 2010.10.15 10:03:12 LOG5[946:3078241136]: Service https accepted connection from 24.171.161.99:1998 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): before accept initialization 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 read client hello A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 write server hello A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 write change cipher spec A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 write finished A 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 flush data 2010.10.15 10:03:12 LOG7[946:3078241136]: SSL state (accept): SSLv3 read finished A 2010.10.15 10:03:12 LOG7[946:3078241136]: 8 items in the session cache 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 client connects (SSL_connect()) 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 client connects that finished 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 client renegotiations requested 2010.10.15 10:03:12 LOG7[946:3078241136]: 35 server connects (SSL_accept()) 2010.10.15 10:03:12 LOG7[946:3078241136]: 35 server connects that finished 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 server renegotiations requested 2010.10.15 10:03:12 LOG7[946:3078241136]: 27 session cache hits 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 external session cache hits 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 session cache misses 2010.10.15 10:03:12 LOG7[946:3078241136]: 0 session cache timeouts 2010.10.15 10:03:12 LOG6[946:3078241136]: SSL accepted: previous session reused 2010.10.15 10:03:12 LOG6[946:3078241136]: Local mode child started (PID=1179) 2010.10.15 10:03:12 LOG7[946:3078241136]: Remote FD=13 initialized 2010.10.15 10:03:13 LOG7[946:3078241136]: Socket closed on read 2010.10.15 10:03:13 LOG7[946:3078241136]: SSL write shutdown 2010.10.15 10:03:13 LOG7[946:3078241136]: SSL alert (write): warning: close notify 2010.10.15 10:03:13 LOG6[946:3078241136]: SSL_shutdown successfully sent close_notify 2010.10.15 10:03:13 LOG6[946:3078241136]: s_poll_wait timeout: connection close 2010.10.15 10:03:13 LOG5[946:3078241136]: Connection closed: 2895 bytes sent to SSL, 2469539 bytes sent to socket 2010.10.15 10:03:13 LOG7[946:3078241136]: Service https finished (0 left) 2010.10.15 10:03:13 LOG7[946:3078133552]: Cleaning up the signal pipe 2010.10.15 10:03:13 LOG6[946:3078133552]: Child process 1179 finished with code 0 2010.10.15 10:03:13 LOG7[946:3078133552]: Signal pipe is empty *** MOST OF THE TIME - AN UNSUCCESSFUL TRANSFER *** 2010.10.15 10:05:01 LOG7[946:3078133552]: Service https accepted FD=0 from 24.171.161.99:1985 2010.10.15 10:05:01 LOG7[946:3077921648]: Service https started 2010.10.15 10:05:01 LOG7[946:3077921648]: FD=0 in non-blocking mode 2010.10.15 10:05:01 LOG5[946:3077921648]: Service https accepted connection from 24.171.161.99:1985 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): before/ accept initialization 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 read client hello A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 write server hello A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 write change cipher spec A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 write finished A 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 flush data 2010.10.15 10:05:01 LOG7[946:3077921648]: SSL state (accept): SSLv3 read finished A 2010.10.15 10:05:01 LOG7[946:3077921648]: 9 items in the session cache 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 client connects (SSL_connect()) 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 client connects that finished 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 client renegotiations requested 2010.10.15 10:05:01 LOG7[946:3077921648]: 44 server connects (SSL_accept()) 2010.10.15 10:05:01 LOG7[946:3077921648]: 44 server connects that finished 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 server renegotiations requested 2010.10.15 10:05:01 LOG7[946:3077921648]: 35 session cache hits 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 external session cache hits 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 session cache misses 2010.10.15 10:05:01 LOG7[946:3077921648]: 0 session cache timeouts 2010.10.15 10:05:01 LOG6[946:3077921648]: SSL accepted: previous session reused 2010.10.15 10:05:01 LOG6[946:3077921648]: Local mode child started (PID=1213) 2010.10.15 10:05:01 LOG7[946:3077921648]: Remote FD=13 initialized 2010.10.15 10:05:04 LOG7[946:3077921648]: Socket closed on read 2010.10.15 10:05:04 LOG7[946:3077921648]: SSL write shutdown 2010.10.15 10:05:04 LOG7[946:3077921648]: SSL alert (write): warning: close notify 2010.10.15 10:05:04 LOG6[946:3077921648]: SSL_shutdown successfully sent close_notify 2010.10.15 10:05:04 LOG6[946:3077921648]: s_poll_wait timeout: connection close 2010.10.15 10:05:04 LOG5[946:3077921648]: Connection closed: 2895 bytes sent to SSL, 66703 bytes sent to socket 2010.10.15 10:05:04 LOG7[946:3077921648]: Service https finished (0 left) 2010.10.15 10:05:04 LOG7[946:3078133552]: Cleaning up the signal pipe 2010.10.15 10:05:04 LOG6[946:3078133552]: Child process 1213 finished with code 0 2010.10.15 10:05:04 LOG7[946:3078133552]: Signal pipe is empty *** All test cases are the same upload of the same image file. In all tests the number of bytes sent to socket matches what the exec program is receiving in its pipe. My feeling is that there is a connection issue between the browser and Stunnel. The successful upload of the test occurs sometimes with all browsers and appears to always work with Firefox for Windows. It has a 90% failure rate on Safari for Windows, Safari for Mac, Opera for Windows, Opera for Mac, etc. In all cases of testing, the number of bytes "sent to socket" is received by my exec program and consists of a truncated message from the browser. It appears that the data is simply being truncated somewhere in the Stunnel process. Any help is always appreciated! If there are more tests to be run to track down the problem, please advise and I will run them. Regards, Bill Bill Crowell, President Pavuk Technologies, LLC PO Box 33097 Charlotte, NC 28233-3097 Office +1 704.248.0024 Mobile +1 704.607.6077 Skype pavuk.com

2 1

Recompiling Stunnel at version 4.34 appears to fix dropped data problem
by Bill Crowell 15 Oct '10

15 Oct '10

I reported a consistent data loss from most browsers when transferring large files. Compiling version 4.34 on Mac OS X 10.6.4 with the latest Xcode toolkit has resolved the connection problem for all browsers that I have tested except for Safari 5.0 on both Windows and Mac. It has also fixed a connection problem with IE 6 which was not accepting any connection to Stunnel prior to this installation. *** This problem still persists on my linux box running 4.33 installed from FC13. I will attempt a compile of 4.34 and see if this fixes the problem there as well. Fedora does not yet have a package for 4.34. Bill Bill Crowell, President Pavuk Technologies, LLC PO Box 33097 Charlotte, NC 28233-3097 Office +1 704.248.0024 Mobile +1 704.607.6077 Skype pavuk.com

1 0

Re: [stunnel-users] stunnel daemon mode
by Joe Williams 09 Oct '10

09 Oct '10

> In inetd mode, you get a new Stunnel process for every connection. > Initialization must occur in *each* new process - they don't share > any state, including any session ids. > > In daemon mode, there's one stunnel process (threaded) which can > share state between threads, so it is much better. Ah I see, so running a single process (w/ pthreads) under runit I get the same effect as daemon mode. Correct? -Joe Name: Joseph A. Williams Email: joe(a)joetify.com Blog: http://www.joeandmotorboat.com/ Twitter: http://twitter.com/williamsjoe

1 0

stunnel daemon mode
by Joe Williams 08 Oct '10

08 Oct '10

According to http://www.sans.org/reading_room/whitepapers/vpns/stunnel-ssling-internet-s… In addition, Stunnel performance is improved by running it in daemon mode instead of inetd. Running Stunnel in daemon mode provides the following benefits: no SSL initialization necessary with every connection, and SSL session caching. Is this still the case? Running in the foreground you don't get these? Thanks. -Joe Name: Joseph A. Williams Email: joe(a)joetify.com Blog: http://www.joeandmotorboat.com/ Twitter: http://twitter.com/williamsjoe

1 0

fingerprint does not match
by Nelson 02 Oct '10

02 Oct '10

I have a running machine with stunnel installed for HTTPS services. Now, I want to setup another machine using the same configuration and key from my 1ST machine. I have installed stunnel patch with x-forwarded-for. However, everytime I try to start it up, it shows: Starting universal SSL tunnel: stunnelReading configuration from file /usr/local/etc/stunnel/stunnel.conf FIPS_mode_set: 2D06C06E: error:2D06C06E:FIPS routines:FIPS_mode_set:fingerprint does not match failed. I'm using the same key and cert that my 1ST machine is using. Would there be a problem? I've no problem starting stunnel yesterday. I just encountered this error when I change my ip address. I make sure that my config also listen to this ip address. Would anyone know how to fix this problem? Tried to Google but to no avail.

3 2