- stunnel-users - stunnel.org

Stunnel on Vista gets "readsocket: Connection reset by peer"
by Scarsdale_James＠emc.com 10 Sep '08

10 Sep '08

Hi, I'm trying to use stunnel 4.25 on Vista over the Microsoft Loopback Adapter, but I always get the following error shown next to ">>>" below. Note that the session seems to have been negotiated okay. I found some notes about using "Run as administrator", but I still get the same behavior with this. The same setup works fine on XP. Any ideas before I start looking at code? Thanks, Jim 2008.09.10 15:27:42 LOG7[2844:692]: RAND_status claims sufficient entropy for the PRNG 2008.09.10 15:27:42 LOG7[2844:692]: PRNG seeded successfully 2008.09.10 15:27:42 LOG7[2844:692]: Certificate: stunnel.pem 2008.09.10 15:27:42 LOG7[2844:692]: Certificate loaded 2008.09.10 15:27:42 LOG7[2844:692]: Key file: stunnel.pem 2008.09.10 15:27:42 LOG7[2844:692]: Private key loaded 2008.09.10 15:27:42 LOG7[2844:692]: SSL context initialized for service smb 2008.09.10 15:27:42 LOG5[2844:692]: stunnel 4.25 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2008.09.10 15:27:42 LOG5[2844:692]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2008.09.10 15:27:42 LOG5[2844:2656]: No limit detected for the number of clients 2008.09.10 15:27:42 LOG7[2844:2656]: FD 248 in non-blocking mode 2008.09.10 15:27:42 LOG7[2844:2656]: SO_REUSEADDR option set on accept socket 2008.09.10 15:27:42 LOG7[2844:2656]: smb bound to 192.168.0.253:139 2008.09.10 15:28:13 LOG7[2844:2656]: smb accepted FD=240 from 192.168.0.253:49238 2008.09.10 15:28:13 LOG7[2844:2656]: Creating a new thread 2008.09.10 15:28:13 LOG7[2844:2656]: New thread created 2008.09.10 15:28:13 LOG7[2844:2856]: smb started 2008.09.10 15:28:13 LOG7[2844:2856]: FD 240 in non-blocking mode 2008.09.10 15:28:13 LOG7[2844:2856]: TCP_NODELAY option set on local socket 2008.09.10 15:28:13 LOG5[2844:2856]: smb accepted connection from 192.168.0.253:49238 2008.09.10 15:28:13 LOG7[2844:2856]: FD 264 in non-blocking mode 2008.09.10 15:28:13 LOG7[2844:2856]: smb connecting 128.221.79.49:10005 2008.09.10 15:28:13 LOG7[2844:2856]: connect_wait: waiting 10 seconds 2008.09.10 15:28:13 LOG7[2844:2856]: connect_wait: connected 2008.09.10 15:28:13 LOG5[2844:2856]: smb connected remote server from 128.221.79.44:49239 2008.09.10 15:28:13 LOG7[2844:2856]: Remote FD=264 initialized 2008.09.10 15:28:13 LOG7[2844:2856]: TCP_NODELAY option set on remote socket 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): before/connect initialization 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write client hello A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read server hello A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read server certificate A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read server done A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write client key exchange A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write change cipher spec A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write finished A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 flush data 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read finished A 2008.09.10 15:28:13 LOG7[2844:2856]: 1 items in the session cache 2008.09.10 15:28:13 LOG7[2844:2856]: 1 client connects (SSL_connect()) 2008.09.10 15:28:13 LOG7[2844:2856]: 1 client connects that finished 2008.09.10 15:28:13 LOG7[2844:2856]: 0 client renegotiations requested 2008.09.10 15:28:13 LOG7[2844:2856]: 0 server connects (SSL_accept()) 2008.09.10 15:28:13 LOG7[2844:2856]: 0 server connects that finished 2008.09.10 15:28:13 LOG7[2844:2856]: 0 server renegotiations requested 2008.09.10 15:28:13 LOG7[2844:2856]: 0 session cache hits 2008.09.10 15:28:13 LOG7[2844:2856]: 0 session cache misses 2008.09.10 15:28:13 LOG7[2844:2856]: 0 session cache timeouts 2008.09.10 15:28:13 LOG6[2844:2856]: SSL connected: new session negotiated 2008.09.10 15:28:13 LOG6[2844:2856]: SSL connected: new session negotiated 2008.09.10 15:28:13 LOG6[2844:2856]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 >>> 2008.09.10 15:28:44 LOG3[2844:2856]: readsocket: Connection reset by peer (WSAECONNRESET) (10054) 2008.09.10 15:28:44 LOG5[2844:2856]: Connection reset: 153 bytes sent to SSL, 0 bytes sent to socket 2008.09.10 15:28:44 LOG7[2844:2856]: smb finished (0 left) Relevant info stunnel.conf on client: [smb] accept = 192.168.0.253:139 connect = [server ipaddress]:10005 Relevant info stunnel.conf on server: [smb] accept = 10005 connect = 139 ;connect = 445

1 0

Stunnel on Vista gets "readsocket: Connection reset by peer"
by Scarsdale_James＠emc.com 10 Sep '08

10 Sep '08

Hi, I'm trying to use stunnel 4.25 on Vista over the Microsoft Loopback Adapter, but I always get the following error shown next to ">>>" below. Note that the SSL session appears to have been negotiated okay. I found some notes about using "Run as adminstrator" on Vista, but I still get the same behavior with this. The same setup works fine on XP. Any ideas before I start looking at code? Thanks, Jim 2008.09.10 15:27:42 LOG7[2844:692]: RAND_status claims sufficient entropy for the PRNG 2008.09.10 15:27:42 LOG7[2844:692]: PRNG seeded successfully 2008.09.10 15:27:42 LOG7[2844:692]: Certificate: stunnel.pem 2008.09.10 15:27:42 LOG7[2844:692]: Certificate loaded 2008.09.10 15:27:42 LOG7[2844:692]: Key file: stunnel.pem 2008.09.10 15:27:42 LOG7[2844:692]: Private key loaded 2008.09.10 15:27:42 LOG7[2844:692]: SSL context initialized for service smb 2008.09.10 15:27:42 LOG5[2844:692]: stunnel 4.25 on x86-pc-mingw32-gnu with OpenSSL 0.9.8h 28 May 2008 2008.09.10 15:27:42 LOG5[2844:692]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2008.09.10 15:27:42 LOG5[2844:2656]: No limit detected for the number of clients 2008.09.10 15:27:42 LOG7[2844:2656]: FD 248 in non-blocking mode 2008.09.10 15:27:42 LOG7[2844:2656]: SO_REUSEADDR option set on accept socket 2008.09.10 15:27:42 LOG7[2844:2656]: smb bound to 192.168.0.253:139 2008.09.10 15:28:13 LOG7[2844:2656]: smb accepted FD=240 from 192.168.0.253:49238 2008.09.10 15:28:13 LOG7[2844:2656]: Creating a new thread 2008.09.10 15:28:13 LOG7[2844:2656]: New thread created 2008.09.10 15:28:13 LOG7[2844:2856]: smb started 2008.09.10 15:28:13 LOG7[2844:2856]: FD 240 in non-blocking mode 2008.09.10 15:28:13 LOG7[2844:2856]: TCP_NODELAY option set on local socket 2008.09.10 15:28:13 LOG5[2844:2856]: smb accepted connection from 192.168.0.253:49238 2008.09.10 15:28:13 LOG7[2844:2856]: FD 264 in non-blocking mode 2008.09.10 15:28:13 LOG7[2844:2856]: smb connecting [server ip]:10005 2008.09.10 15:28:13 LOG7[2844:2856]: connect_wait: waiting 10 seconds 2008.09.10 15:28:13 LOG7[2844:2856]: connect_wait: connected 2008.09.10 15:28:13 LOG5[2844:2856]: smb connected remote server from 128.221.79.44:49239 2008.09.10 15:28:13 LOG7[2844:2856]: Remote FD=264 initialized 2008.09.10 15:28:13 LOG7[2844:2856]: TCP_NODELAY option set on remote socket 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): before/connect initialization 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write client hello A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read server hello A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read server certificate A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read server done A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write client key exchange A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write change cipher spec A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 write finished A 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 flush data 2008.09.10 15:28:13 LOG7[2844:2856]: SSL state (connect): SSLv3 read finished A 2008.09.10 15:28:13 LOG7[2844:2856]: 1 items in the session cache 2008.09.10 15:28:13 LOG7[2844:2856]: 1 client connects (SSL_connect()) 2008.09.10 15:28:13 LOG7[2844:2856]: 1 client connects that finished 2008.09.10 15:28:13 LOG7[2844:2856]: 0 client renegotiations requested 2008.09.10 15:28:13 LOG7[2844:2856]: 0 server connects (SSL_accept()) 2008.09.10 15:28:13 LOG7[2844:2856]: 0 server connects that finished 2008.09.10 15:28:13 LOG7[2844:2856]: 0 server renegotiations requested 2008.09.10 15:28:13 LOG7[2844:2856]: 0 session cache hits 2008.09.10 15:28:13 LOG7[2844:2856]: 0 session cache misses 2008.09.10 15:28:13 LOG7[2844:2856]: 0 session cache timeouts 2008.09.10 15:28:13 LOG6[2844:2856]: SSL connected: new session negotiated 2008.09.10 15:28:13 LOG6[2844:2856]: SSL connected: new session negotiated 2008.09.10 15:28:13 LOG6[2844:2856]: Negotiated ciphers: AES256-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(256) Mac=SHA1 >>> 2008.09.10 15:28:44 LOG3[2844:2856]: readsocket: Connection reset by peer (WSAECONNRESET) (10054) 2008.09.10 15:28:44 LOG5[2844:2856]: Connection reset: 153 bytes sent to SSL, 0 bytes sent to socket 2008.09.10 15:28:44 LOG7[2844:2856]: smb finished (0 left) Relevant info stunnel.conf on client: [smb] accept = 192.168.0.253:139 connect = [server ip]:10005 Relevant info stunnel.conf on server: [smb] accept = 10005 connect = 139 ;connect = 445

1 0

Building STunnel 4.25 with OpenSSL 0.9.8h on Windows
by Paul Coleman 10 Sep '08

10 Sep '08

Hi everyone, I've recently been trying to compile STunnel for Windows, but have found so many conflicting reports of the best way to do it on the website / other sites, that I'm now well and truly confused! I've got MSVS 2005, but have also tried with mingw, and cygwin - and also on Linux using mingw32. I'm unsure as to whether I need some Makefile.w32, whether I need to compile OpenSSL from source, where I need to put OpenSSL libraries when they're done, if I need to run Configure, etc etc. I'm not looking for a complete step by step guide including 'cd to x, type this' (although I wouldn't complain! :P), but a general poke in the right direction would be great. Thanks for your help, --Paul

1 0

Re: [stunnel-users] Help using stunnel for the first time
by Jilin Zhang 09 Sep '08

09 Sep '08

try: http://localhost:1515 > Hi, > > I'm trying to use stunnel for the first time (on Mac OS X 10.5), and > I'm not having much luck. > > First of all, I downloaded the source and installed stunnel > successfully. I then setup a config file as follows (where myhost is > the host i am connecting to): > > client=yes > verify=0 > [psuedo-https] > accept=1515 > connect=myhost:443 > TIMEOUTclose = 0 > > Then, I run the following on the command line: > /usr/local/bin/stunnel ./stunnel.config > > It appears that stunnel runs without error, and if I do 'ps aux | grep > stunnel' there are 4 stunnel processes running. > > Then, as a test, I try to connect to port 1515 from my web browser by > visiting https://localhost:1515, but it just hangs there... nothing. > > Any suggestions? > > Thanks! > > Ian > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)mirt.net > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > >

2 1

Help using stunnel for the first time
by Ian Baxter 09 Sep '08

09 Sep '08

Hi, I'm trying to use stunnel for the first time (on Mac OS X 10.5), and I'm not having much luck. First of all, I downloaded the source and installed stunnel successfully. I then setup a config file as follows (where myhost is the host i am connecting to): client=yes verify=0 [psuedo-https] accept=1515 connect=myhost:443 TIMEOUTclose = 0 Then, I run the following on the command line: /usr/local/bin/stunnel ./stunnel.config It appears that stunnel runs without error, and if I do 'ps aux | grep stunnel' there are 4 stunnel processes running. Then, as a test, I try to connect to port 1515 from my web browser by visiting https://localhost:1515, but it just hangs there... nothing. Any suggestions? Thanks! Ian

1 0

Re: [stunnel-users] A Calypso user needs your help with stunnel
by John Bryant 09 Sep '08

09 Sep '08

Dear Ludolf et al: Thank you very much for your recent communication. I drew up what I thought I needed, based on your answer, in the configuration file. As might be expected in that I'm a novice at this, I still have a few more questions: 1. I tried it with and without the "Authentification stuff". Either way, after modifying stunnel.conf, and running stunnel.exe, stunnel.exe bombed with the following error: "Stunnel server down" (log said: ************** 2008.09.02 14:20:17 LOG7[16442455:16274811]: RAND_status claims sufficient entropy for the PRNG 2008.09.02 14:20:17 LOG7[16442455:16274811]: PRNG seeded successfully 2008.09.02 14:20:17 LOG3[16442455:16274811]: Error loading verify certificates from certs.pem 2008.09.02 14:20:17 LOG3[16442455:16274811]: error stack: B084002 : error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib 2008.09.02 14:20:17 LOG3[16442455:16274811]: error stack: 2006D080 : error:2006D080:BIO routines:BIO_new_file:no such file 2008.09.02 14:20:17 LOG3[16442455:16274811]: SSL_CTX_load_verify_locations: 2001002: error:02001002:system library:fopen:No such file or directory 2008.09.02 14:20:17 LOG3[16442455:16274811]: Server is down What caused this? ************** 2. My other question is: Do I need to put stunnel.exe in the startup folder? Does it automatically reference stunnel.conf (that is what I was assuming)? When I get it to run correctly, automatically referencing stunnel, conf, then can I run Calypso with the settings changed to tie in with the stunnel conf file? All of the above I was assuming was true, but I'm just asking to make sure. Thanks! Lenny

3 6

Respawn stunnel
by Joe Kemp 08 Sep '08

08 Sep '08

What is the best way to setup stunnel to respawn if it crashes? I have looked at inittab (probably would have to have stunnel run in foreground?) or the procautostart.cpp utility. Any other ideas? Is there an easier way. Joe A. Kemp CapWIN Senior Systems Architect (O) 301-614-3727 (C) 301-502-1281

2 1

Re: [stunnel-users] Scripting stunnel to load automatically when OS X 10.5 server starts up -plist
by Christopher Hunt 04 Sep '08

04 Sep '08

On 04/09/2008, at 8:00 PM, stunnel-users-request(a)mirt.net wrote: > Here is my plist. I put this in /Library/LaunchDaemons. What do you > think? --Thanks, Allen Firstly have you considered using Lingon to maintain your plist? That could help you. > <?xml version="1.0" encoding="UTF-8"?> > <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd > "> > <plist version="1.0"> > <dict> > <key>KeepAlive</key> > <true/> > <key>Label</key> > <string>stunnel_startup</string> > <key>ProgramArguments</key> > <array> > <string>/opt/local/bin/stunnel</string> > </array> > <key>RunAtLoad</key> > <true/> > </dict> > </plist> The most obvious thing that stands out is that you aren't supplying a config file argument to stunnel. How's it going to locate your config file? You might want to check your system.log file using the Console application and watch for messages. You also need to use launchctl to load your plist - Lingon makes this pretty straightforward. Cheers, -C

1 0

Scripting stunnel to load automatically when OS X 10.5 server starts up -plist
by Allen 03 Sep '08

03 Sep '08

Thank you Chris and Tom, for your responses, Here is my plist. I put this in /Library/LaunchDaemons. What do you think? --Thanks, Allen <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd "> <plist version="1.0"> <dict> <key>KeepAlive</key> <true/> <key>Label</key> <string>stunnel_startup</string> <key>ProgramArguments</key> <array> <string>/opt/local/bin/stunnel</string> </array> <key>RunAtLoad</key> <true/> </dict> </plist>

1 1

Re: [stunnel-users] Scripting stunnel to load automatically when OS X 10.5 server starts up -any solution?
by Christopher Hunt 03 Sep '08

03 Sep '08

On 03/09/2008, at 8:00 PM, stunnel-users-request(a)mirt.net wrote: > Does anybody have a solution that will start up stunnel on OS X > bootup? ... Sounds to me like a launchd config error. How about sending through the plist? Cheers, -C

2 1