- stunnel-users - stunnel.org

(no subject)
by Hemesath, Dean CTR USTRANSCOM J6 25 Jan '07

25 Jan '07

To all, Can Stunnel communicate bi-directionally over a single port? Or does it listen on one and communicate on a different one? Thanks Dean

1 0

dude using stunnel
by aza zel 24 Jan '07

24 Jan '07

hi, is my first message in this list and i send to all of members a great greeting i want to now if this stage is posible (i look the example in your web site that inspired me) NET +---------+ | | +--------+ | non-SSL | -ST---- | | --- | LDAP | | enabled | | | | WITH | | client | | | | SSL | +---------+ | | +--------+ winXP CLIENT | | LDAP SERVER | | +---------+ | | | | ------- | | | | | | | client | +---------+ linux CLIENT In client side i have: - linux clients autenticate via pam and using tls (here i not have problems) :) - win xp (sp2) clients auntenticate via pgina without ssl or tls (i cant make work ssl in pgina (its posible the problem was the server certificate)) :( in server side i have a solaris when run a sun ldap server using a self signed certificate and accepting ssl/tls or not ssl/tls connections :) so, ¿with stunnel only in win side can i have this stage using the self signed cetificate provided by server? Salu2 :D

1 0

Re: [stunnel-users] How is stunnel started ? / Searching stunnel service name
by Ben Stover 22 Jan '07

22 Jan '07

Hmm that is very curious. I investigated now all runnig services and did not found the stunnel service. The only reason I can find for this is that the service name does not contain "stunnel" in its name. How is it called otherwise? My services here (under Win2000) are (when I type "net start" at the command prompt): Alerter AVK Monitor AVK Service AVKProxy COM+ Event System Computer Browser DHCP Client Distributed Link Tracking Client Event Log IPSEC Policy Agent Logical Disk Manager MGABGEXE Network Connections PDFCreatorMessages PDScheduler Plug and Play Print Spooler Protected Storage Remote Access Connection Manager Remote Procedure Call (RPC) Remote Registry Service Removable Storage RunAs Service Security Accounts Manager Server Still Image Service System Event Notification Task Scheduler TCP/IP NetBIOS Helper Service Telephony Washer AutoComplete Windows Management Instrumentation Windows Management Instrumentation Driver Extensions Workstation Is it IPSEC Policy agent the service for stunnel ? Regards Ben On Fri, 19 Jan 2007 08:24:56 -0500, Carter Browne wrote: >One of the installation options is to have it run as a service in which >case it starts automatically as you note. This behavior can be >controlled from the services option in the administrative options of the >control panel (entering services.msc from the command line will also >bring it up). Then name of the service is stunnel. > >Carter > >Ben Stover wrote: >> After installation stunnel started automatically at Windows startup time. >> >> I tried to investigate how it is started. >> But did neither a classic startup folder entry nor a running service entry. >> Did I miss something? >> >> How is stunnel started ? >> >> Ben >> >> >> >> >> ___________________________________________________________ >> All New Yahoo! Mail â¬ Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. http://uk.docs.yahoo.com/nowyoucan.html >> _______________________________________________ >> stunnel-users mailing list >> stunnel-users(a)mirt.net >> http://stunnel.mirt.net/mailman/listinfo/stunnel-users >> >> ___________________________________________________________ Now you can scan emails quickly with a reading pane. Get the new Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html

2 1

SCO 6 Compil of libxml2
by Eric S. Eberhard 22 Jan '07

22 Jan '07

Everyone, With a lot of help from Daniel I got it to work under the new SCO. It takes a few trick: chsysinfo uw7 ./configure --without-zlib --without-threads chsysinfo default make In case anyone else needs to do this :-) Thanks! Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice http://www.vicsmba.com

1 0

SCO 6 Compil of libxml2
by Eric S. Eberhard 22 Jan '07

22 Jan '07

Everyone, With a lot of help from Daniel I got it to work under the new SCO. It takes a few trick: chsysinfo uw7 ./configure --without-zlib --without-threads chsysinfo default make In case anyone else needs to do this :-) Thanks! Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice

1 0

Re: [stunnel-users] patch: round robin load balancing
by Michal Trojnara 20 Jan '07

20 Jan '07

Luke wrote: > Here is a simple patch which allows the "connect" option to accept a > comma separated list of names instead of just a single name. This feature is already implemented since version 4.06, 2004.12.26. Here is the relevant frament of ChangeLog: "Multiple connect=host:port options are allowed in a single service section. Remote hosts are connected using round-robin algorithm. This feature is not compatible with delayed resolver." Best regards, Mike

2 2

Error I am receiving in stunnel logfile (help please!)
by Eric S. Eberhard 20 Jan '07

20 Jan '07

Hello Everyone, I tried it on 4.3.3 as well with my re-compiled version ... below are all 5 lines in the log file. stunnel 4.16 on powerpc-ibm-aix4.3.3.0 with OpenSSL 0.9.8c 05 Sep 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 stunnel connected from 127.0.0.1:37690 remote socket: Addr family not supported by protocol (66) Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket I also recompiled the latest stunnel with and without IPv6 ... same result with IPv6 as with IPv4 and same result with the new version: stunnel 4.20 on powerpc-ibm-aix4.3.3.0 with OpenSSL 0.9.8c 05 Sep 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 stunnel accepted connection from ::ffff:127.0.0.1:59274 remote socket: Addr family not supported by protocol (66) Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket I have been using this for a while but I had to transfer to a new machine (AIX 4.3 to 5.3) and had to recompile my software and get a newer stunnel. I am now on 4.20 I thought it might be related to ipv4 versus ipv6 ... according to AIX documentation I had it set up for ipv4. I tried ipv6 for ducks, no difference. My inetd.conf line is: visanet stream tcp nowait root /visanet/ssl/stunnel stunnel visanet stream tcp6 nowait root /visanet/ssl/stunnel stunnel The second is IPv6. The error is somehow on the remote though. I can connect to the remote with telnet ... just not stunnel. It seems that depending on how inetd is configured, stunnel accepts either the IPv4 or IPv6 whether or not I compil it using USE_IPv6 1 or not ... what am I missing!? I really only need to hack it to connect to this one site, at least for the moment. /visanet/ssl/visanet.conf My .conf file is: output = /tmp/stunnel.log debug = 5 RNDfile = /visanet/ssl/stunnel.rnd RNDoverwrite = yes client = yes connect = ssllab.pgs.wcom.net:443 sslVersion = SSLv2 cert = /visanet/ssl/stunnel.pem EGD = /etc/egd-pool My guess is that this is something really stupid I am doing, but it is not obvious. Any help would be appreciated. I would even take an AIX executable for stunnel that works! Or whatever the correct configure options are. Or???? Thanks, Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0

Re: [stunnel-users] How is stunnel started ?
by Gonzalo Diethelm 19 Jan '07

19 Jan '07

Probably through a Run entry in the registry. You should definitely try to use something like CodeStuff's Starter: http://members.lycos.co.uk/codestuff/ Best regards. On Fri, 2007-01-19 at 09:31 +0100, Ben Stover wrote: > After installation stunnel started automatically at Windows startup time. > > I tried to investigate how it is started. > But did neither a classic startup folder entry nor a running service entry. > Did I miss something? > > How is stunnel started ? > > Ben > > > > > ___________________________________________________________ > All New Yahoo! Mail – Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. http://uk.docs.yahoo.com/nowyoucan.html > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)mirt.net > http://stunnel.mirt.net/mailman/listinfo/stunnel-users > -- Gonzalo Diethelm gonzalo.diethelm(a)aditiva.com

2 2

Error I am receiving in stunnel logfile (more info)
by Eric S. Eberhard 18 Jan '07

18 Jan '07

Hello Everyone, I tried it on 4.3.3 as well with my re-compiled version ... below are all 5 lines in the log file. stunnel 4.16 on powerpc-ibm-aix4.3.3.0 with OpenSSL 0.9.8c 05 Sep 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv4 stunnel connected from 127.0.0.1:37690 remote socket: Addr family not supported by protocol (66) Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket I have been using this for a while but I had to transfer to a new machine (AIX 4.3 to 5.3) and had to recompile my software and get a newer stunnel. My version is stunnel-3.8p4: I thought it might be related to ipv4 versus ipv6 ... according to AIX documentation I had it set up for ipv4. I tried ipv6 for ducks, no difference. My inetd.conf line is: visanet stream tcp nowait root /visanet/ssl/stunnel stunnel /visanet/ssl/visanet.conf My .conf file is: output = /tmp/stunnel.log debug = 5 RNDfile = /visanet/ssl/stunnel.rnd RNDoverwrite = yes client = yes connect = ssllab.pgs.wcom.net:443 sslVersion = SSLv2 cert = /visanet/ssl/stunnel.pem EGD = /etc/egd-pool My guess is that this is something really stupid I am doing, but it is not obvious. Any help would be appreciated. Thanks, Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0

Error I am receiving in stunnel logfile
by Eric S. Eberhard 18 Jan '07

18 Jan '07

Hello Everyone, remote socket: Addr family not supported by protocol (66) I have been using this for a while but I had to transfer to a new machine (AIX 4.3 to 5.3) and had to recompile my software and get a newer stunnel. My version is stunnel-3.8p4: My .conf file is: output = /tmp/stunnel.log debug = 5 RNDfile = /visanet/ssl/stunnel.rnd RNDoverwrite = yes client = yes connect = ssllab.pgs.wcom.net:443 sslVersion = SSLv2 cert = /visanet/ssl/stunnel.pem EGD = /etc/egd-pool My guess is that this is something really stupid I am doing, but it is not obvious. Any help would be appreciated. Thanks, Eric This email sent by: Eric S. Eberhard (928) 567-3727 Voice (928) 567-6122 Fax 928-301-7537 -- you may call any time day or night, I turn it off when I sleep :-) Please try to use a land line first (reception often poor). Note the change in the domain from vicspdi.com to vicsmba.com !!!! For Metropolis support and VICS MBA Support!!!! http://www.vicsmba.com Completely updated web site of personal pictures with many new pictures! Includes horses, dogs, Corvairs, and more. http://www.vicsmba.com/ourpics/index.html Corvair pictures including the Judson setup on our 62 Sedan and lots of pictures of Cheryl's 62 Monza Wagon and our 62 Spyder convertible. http://www.vicsmba.com/ourpics/corvairs.html My younger brother Martin has started a very serious car company. A hot rod (very fast) electric roadster is the first offering. The chassis is built by Lotus to their specs. Check it out: http://www.teslamotors.com

1 0