- stunnel-users - stunnel.org

PATCH: Support PostgreSQL SSL
by Marko Kreen 06 Nov '07

06 Nov '07

PostgreSQL protocol has small handshake on connecting before SSL can be initialized. But that means that Stunnel cannot be used by default as it expects the SSL initialization to be the first thing when getting connection. Attached patch adds PostgreSQL protocol support to Stunnel, so that Stunnel can be used to provide SSL when either client or server is not able to do it natively. SSL handshake is described here: http://www.postgresql.org/docs/8.3/static/protocol-flow.html#AEN73013 Patch is tested and works, hopefully it can be included in main Stunnel source. -- marko

1 0

STUNNEL Licensing
by Menon, Sreejith Mohan 06 Nov '07

06 Nov '07

Dear Users, Is there any special licensing required to use STUNNEL ? In case, it is not required from STUNNEL , is there anything to be done on the OPENSSL side ? Thanks and best regards, Sreejith Mohan Menon

1 0

Re: [stunnel-users] almost working
by Tom Allison 05 Nov '07

05 Nov '07

Luke Deller wrote: > Hi Tom, > >> OK, this has been nothing but a bust. > > I've just read this thread, and it looks to me that you have stunnel configured incorrectly for use with inetd. > > Did you see this documentation? > http://www.stunnel.org/faq/stunnel.html#inetd_mode > >> the error keeps saying that port 993 is already in use. > > This is because you have configured stunnel to bind to port 993 using an "accept" option in the configuration file. When using stunnel with inetd, stunnel should not bind to any port; it is inetd which binds to a port. When a client connects to inetd, then inetd will launch stunnel with stunnel's stdin and stdout streams hooked up to the connected socket. > Made some progress. Got past the SSL version. Fixed my firewall to permit IMAPS sessions. confirmed my firewall settings by changing to IMAP and running directly against the imap server. Changed firewall settings from imap to imaps. Keep timing out. Same problem for Mac Mail application (which isn't great) and Debian's Icedove. This is as far as I can get. 2007.11.05 05:43:56 LOG7[27692:47518144360528]: Connection from 65.29.101.30:49841 permitted by libwrap 2007.11.05 05:43:56 LOG5[27692:47518144360528]: inetd connected from 65.29.101.30:49841 2007.11.05 05:43:56 LOG7[27692:47518144360528]: SSL state (accept): before/accept initialization 2007.11.05 05:43:56 LOG7[27692:47518144360528]: SSL state (accept): SSLv3 read client hello A 2007.11.05 05:43:56 LOG7[27692:47518144360528]: SSL state (accept): SSLv3 write server hello A 2007.11.05 05:43:56 LOG7[27692:47518144360528]: SSL state (accept): SSLv3 write certificate A 2007.11.05 05:43:56 LOG7[27692:47518144360528]: SSL state (accept): SSLv3 write server done A 2007.11.05 05:43:56 LOG7[27692:47518144360528]: SSL state (accept): SSLv3 flush data

1 0

Re: [stunnel-users] Using stunnel for RDP / Proxy / Firewall
by Frank Garber 30 Oct '07

30 Oct '07

I tried using the port you suggested and got the same result. I'm able to verify my firewall is letting the traffic through and that my ISP is not blocking the port by using www.canyouseeme.org . Again, all my settings work when I'm not going through the corporate firewall. Can you send me your whole config file for both your client and server sides? I'm wondering if it has to do with my certificate settings. Thanks, Frank ----- Original Message ---- From: Carter Browne <xxxx> To: garberfc <xxxx> Sent: Monday, October 22, 2007 8:07:11 AM Subject: Re: [stunnel-users] Using stunnel for RDP / Proxy / Firewall I do this all the time. The way I do it is to connect locally to RDP on a non-stardard port. In the RDP dialog box, I have 127.0.0.10:12121, then in stunnel on the local side is: [xxx-rdp] accept = 127.0.0.10:12121 connect = server:12122 client = yes on the remote side is [rdp-incoming] accept = 12122 connect = 3389 client = no. Normally RDP listens for any connection to port 3389, so I found it was easiest to get to to work by moving off that port. Note that you have to open port 12122 in the firewall on the remote side. On the other hand, you can close 3389 on the remote side which takes away an obvious port for hackers. Carter garberfc wrote: > Hi All > > I'm a relative newbie to Stunnel, and am trying to set up a tunnel so I can > Remote Desktop from work to my PC/server at home. > > I'm using versions 4.20 of the Windows binaries. > > I've tested the configuration and it works from home using a laptop that is > going through my firewall > when I enter my domain home (so my firewall is set up correctly). I tried a > variety of common ports and got the same response every time. I had to use > the 127.0.0.2 on the client because Remote Desktop didn't want me connecting > to myself... > > When I try if from work I get a dialog box: > The client could not establish a connection to the remote computer. > The most likely causes for this error are: > 1) Remote connections might not be enabled at the remote computer. > 2)The maximum number of connections was exceeded at the remote computer. > 3) A network error occurred while establishing the connection. > > My config is as follows: > > #Client > ;cert = stunnel.pem > ;key = stunnel.pem > > ; Some performance tunings > socket = l:TCP_NODELAY=1 > socket = r:TCP_NODELAY=1 > > ; Some debugging stuff useful for troubleshooting > debug = 7 > output = stunnel.log > > ; Use it for client mode > client = yes > > ; Service-level configuration > [https-RDT] > accept = 127.0.0.2:3389 > connect = xx.xx.xx.xx:1494 > > > #Server > ; Some performance tunings > socket = l:TCP_NODELAY=1 > socket = r:TCP_NODELAY=1 > > ; Some debugging stuff useful for troubleshooting > debug = 7 > output = stunnel.log > > ; Use it for client mode > client = no > > ; Service-level configuration > [https-RDT] > accept = 1494 > connect = localhost:3389 > > > Is there something I need to do to traverse this proxy? Any help would be > greatly appreciated! > >

3 4

Re: [stunnel-users] almost working
by Tom Allison 30 Oct '07

30 Oct '07

On Oct 29, 2007, at 9:39 PM, Luke Deller wrote: > > Hi Tom, > >> OK, this has been nothing but a bust. > > I've just read this thread, and it looks to me that you have > stunnel configured incorrectly for use with inetd. > > Did you see this documentation? > http://www.stunnel.org/faq/stunnel.html#inetd_mode > >> the error keeps saying that port 993 is already in use. > > This is because you have configured stunnel to bind to port 993 > using an "accept" option in the configuration file. When using > stunnel with inetd, stunnel should not bind to any port; it is > inetd which binds to a port. When a client connects to inetd, then > inetd will launch stunnel with stunnel's stdin and stdout streams > hooked up to the connected socket. Amazing how much progess can be made in a minute. Thank you very much. I did miss that line in the docs. I've moved on to a slightly different error, but it's probably going to be easier for me to sort this one out. I have to go to out, so I'll read up on it and try it when I get back. I'm going to guess I have a ssl version/imap version issue to sort out. I'm trying to connect from a macbook to this server. Thank You!!! 2007.10.30 07:07:59 LOG5[22402:47915096707152]: stunnel 4.18 on x86_64-pc-linux-gnu with OpenSSL 0.9.8c 05 Sep 2006 2007.10.30 07:07:59 LOG5[22402:47915096707152]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2007.10.30 07:07:59 LOG7[22402:47915096707152]: inetd started 2007.10.30 07:07:59 LOG7[22402:47915096707152]: FD 0 in non-blocking mode 2007.10.30 07:07:59 LOG7[22402:47915096707152]: FD 1 in non-blocking mode 2007.10.30 07:07:59 LOG7[22402:47915096707152]: TCP_NODELAY option set on local socket 2007.10.30 07:07:59 LOG7[22402:47915096707152]: FD 4 in non-blocking mode 2007.10.30 07:07:59 LOG7[22402:47915096707152]: FD 5 in non-blocking mode 2007.10.30 07:07:59 LOG7[22402:47915096707152]: Connection from 65.29.101.30:53036 permitted by libwrap 2007.10.30 07:07:59 LOG5[22402:47915096707152]: inetd connected from 65.29.101.30:53036 2007.10.30 07:07:59 LOG7[22402:47915096707152]: SSL state (accept): before/accept initialization 2007.10.30 07:07:59 LOG3[22402:47915096707152]: SSL_accept: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2007.10.30 07:07:59 LOG5[22402:47915096707152]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2007.10.30 07:07:59 LOG7[22402:47915096707152]: inetd finished (0 left)

1 0

almost working
by Tom Allison 30 Oct '07

30 Oct '07

I'm trying to tunnel imap but I'm not getting past this: 2007.10.08 05:56:28 LOG5[5355:47656983060560]: stunnel 4.18 on x86_64-pc-linux-gnu with OpenSSL 0.9.8c 05 Sep 2006 2007.10.08 05:56:28 LOG5[5355:47656983060560]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2007.10.08 05:56:28 LOG6[5355:47656983060560]: file ulimit = 1024 (can be changed with 'ulimit -n') 2007.10.08 05:56:28 LOG6[5355:47656983060560]: poll() used - no FD_SETSIZE limit for file descriptors 2007.10.08 05:56:28 LOG5[5355:47656983060560]: 500 clients allowed 2007.10.08 05:56:28 LOG7[5355:47656983060560]: FD 4 in non-blocking mode 2007.10.08 05:56:28 LOG7[5355:47656983060560]: FD 5 in non-blocking mode 2007.10.08 05:56:28 LOG7[5355:47656983060560]: FD 6 in non-blocking mode 2007.10.08 05:56:28 LOG7[5355:47656983060560]: SO_REUSEADDR option set on accept socket 2007.10.08 05:56:28 LOG3[5355:47656983060560]: Error binding imaps to 0.0.0.0:993 2007.10.08 05:56:28 LOG3[5355:47656983060560]: bind: Address already in use (98) I can't find where to begin. I set SO_REUSEADDR and it didn't do anything different. How do I test this stuff sanely?

4 8

stunnel 4.21 released
by Michal Trojnara 27 Oct '07

27 Oct '07

Dear Users, The new version is available for download on: ftp://stunnel.mirt.net/stunnel/ Version 4.21, 2007.10.27, urgency: LOW/EXPERIMENTAL: * New features sponsored by Open-Source Software Institute - Initial FIPS 140-2 support (see INSTALL.FIPS for details). Win32 platform is not currently supported. * New features - Experimental fast support for non-MT-safe libwrap is provided with pre-spawned processes. - Stunnel binary moved from /usr/local/sbin to /usr/local/bin in order to meet FHS and LSB requirements. Please delete the /usr/local/sbin/stunnel when upgrading. - Added code to disallow compiling stunnel with pthreads when OpenSSL is compiled without threads support. - Win32 DLLs for OpenSSL 0.9.8g. - Minor manual update. - TODO file updated. * Bugfixes - Dynamic locking callbacks added (needed by some engines to work). - AC_ARG_ENABLE fixed in configure.am to accept yes/no arguments. - On some systems libwrap requires yp_get_default_domain from libnsl, additional checking was added. - Sending a list of trusted CAs for the client to choose the right certificate restored. - Some compatibility issues with NTLM authentication fixed. - Taskbar icon (unless there is a config file parsing error) and "Save As" disabled in the service mode for local Win32 security (it's much like Yeti -- some people claim they have seen it). sha1 hash for stunnel-4.21.tar.gz file: 7785c45167d902aa728b839adee02a8cc056d86a Best regards, Mike

1 0

Re: [stunnel-users] stunnel-users Digest, Vol 39, Issue 16
by Frank Garber 24 Oct '07

24 Oct '07

I tested with my firewall with both PCs at home. I can make it work with the port open and when I close the port it fails. it's only when I try to connect from behind the corporate firewall that it fails. I've tried several other port numbers and always get the same results. Can you send me your entire client and server config files so I can see the settings? Thanks, Frank ----- Original Message ---- From: "stunnel-users-request(a)mirt.net" <stunnel-users-request(a)mirt.net> To: stunnel-users(a)mirt.net Sent: Tuesday, October 23, 2007 6:00:06 AM Subject: stunnel-users Digest, Vol 39, Issue 16 Send stunnel-users mailing list submissions to stunnel-users(a)mirt.net To subscribe or unsubscribe via the World Wide Web, visit http://stunnel.mirt.net/mailman/listinfo/stunnel-users or, via email, send a message with subject or body 'help' to stunnel-users-request(a)mirt.net You can reach the person managing the list at stunnel-users-owner(a)mirt.net When replying, please edit your Subject line so it is more specific than "Re: Contents of stunnel-users digest..." Today's Topics: 1. [RE] Using stunnel for RDP / Proxy / Firewall (Algol Tradent) Hello, I think your problem might be related to your configuration firewall/router. Have you enabled port-forwarding for the connection? >From your configuration files I can see you are using port 1494. Check that you are forwarding that port. Also make sure you configure any firewall software running on the machine you want to connect to, in order to allow connections. Best Regards __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 0

[RE] Using stunnel for RDP / Proxy / Firewall
by Algol Tradent 22 Oct '07

22 Oct '07

Hello, I think your problem might be related to your configuration firewall/router. Have you enabled port-forwarding for the connection? >From your configuration files I can see you are using port 1494. Check that you are forwarding that port. Also make sure you configure any firewall software running on the machine you want to connect to, in order to allow connections. Best Regards __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

Using stunnel for RDP / Proxy / Firewall
by garberfc 20 Oct '07

20 Oct '07

Hi All I'm a relative newbie to Stunnel, and am trying to set up a tunnel so I can Remote Desktop from work to my PC/server at home. I'm using versions 4.20 of the Windows binaries. I've tested the configuration and it works from home using a laptop that is going through my firewall when I enter my domain home (so my firewall is set up correctly). I tried a variety of common ports and got the same response every time. I had to use the 127.0.0.2 on the client because Remote Desktop didn't want me connecting to myself... When I try if from work I get a dialog box: The client could not establish a connection to the remote computer. The most likely causes for this error are: 1) Remote connections might not be enabled at the remote computer. 2)The maximum number of connections was exceeded at the remote computer. 3) A network error occurred while establishing the connection. My config is as follows: #Client ;cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [https-RDT] accept = 127.0.0.2:3389 connect = xx.xx.xx.xx:1494 #Server ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = no ; Service-level configuration [https-RDT] accept = 1494 connect = localhost:3389 Is there something I need to do to traverse this proxy? Any help would be greatly appreciated! -- View this message in context: http://www.nabble.com/Using-stunnel-for-RDP---Proxy---Firewall-tf4654985.ht… Sent from the Stunnel - Users mailing list archive at Nabble.com.

1 0