- stunnel-users - stunnel.org

Application Failed to Initialize Properly (0xc0150002)
by Thomas Eifert 09 Aug '12

09 Aug '12

New problem here. Stunnel version 4.53. I just did a fresh install of Windows XP Pro x86 SP3, and did all the Windows updates as well. Whenever I try to launch Stunnel or install the service, I get the error: "Application Failed to Initialize Properly (0xc0150002)" I've never seen this before. I thought it might have something to do with not having the Visual C++ Redistributables, so I installed those too, with the same result. Has anyone else seen this issue? Regards, Thomas -- Attention: This message and all attachments are private and may contain information that is confidential and privileged. If you received this message in error, please notify the sender by reply email and delete the message immediately.

3 4

Stunnel waits for a long time if client does not negotiate SSL
by Denis Solovyov 09 Aug '12

09 Aug '12

Hello, I use stunnel 4.53 to provide pop3s for existing pop3 service. I start stunnel from xinetd, and then exec pop3 utility from stunnel. If a legal pop3s client connects to a server, everything's fine. But if I try to do "telnet host 995" with a simple telnet client and then just do nothing (or even close telnet client without quitting) stunnel process keeps waiting for a very long time (actually maybe forever, I just kill it). The last line in log in such case "Service [stunnel] accepted connection from xx.xx.xx.xx:xxxx". No stunnel TIMEOUT* options have effect in this situation. What can I do to avoid such "waiting"? Maybe stunnel should have something like "SSL negotiation timeout"? Or is there a way to emulate it? (Analyzing `ps` or `netstat` is a bad idea of course.) With the best regards, Denis Solovyov

2 3

Re: [stunnel-users] Application Failed to Initialize Properly (0xc0150002)
by Generic Poster 08 Aug '12

08 Aug '12

Hi Thomas, I have the exact same error when trying to run stunnel on a virtual XP machine under windows 7. I asked here and the only reply I got was that it sounded like a configuration problem. I have tried everything I can think of, but to no avail. I just gave up trying in the end. Wednesday, August 8, 2012, 2:20:43 AM, you wrote: > New problem here. Stunnel version 4.53. > I just did a fresh install of Windows XP Pro x86 SP3, and did all the > Windows updates as well. > Whenever I try to launch Stunnel or install the service, I get the error: > "Application Failed to Initialize Properly (0xc0150002)" > I've never seen this before. I thought it might have something to do > with not having the Visual C++ Redistributables, so I installed those too, > with the same result. > Has anyone else seen this issue? > Regards, > Thomas -- Best regards, GP

2 1

Getting Stunnel to Work Under Windows 7 64-bit
by Hacker, Dietmar 06 Aug '12

06 Aug '12

Some thoughts about a thread from may: Stunnel works ok under Windows7 64bit. But: There are some windows7-specific security restraints one should be aware of: Windows7 does not allow programs to have write-access to c:\program files and c:\program files (x86) (win7 64bit). You can find the logfile in hidden directory c:\users\Youruser\appdata\local\virtualstore\program files\stunnel\stunnel.log ( Youruser is the windows user which started stunnel ) If you want a common logfile for all users, either you install stunnel in another writeable directory (security risk ?) or if installing in program files change your stunnel.conf file to have the log file in a writeable directory e.g. c:\temp or the standard common data directory c:\programData (also a hidden directory ) I use stunnel as a service and defined "output = c:\programData\stunnel\stunnel.log" stunnel writes there and only users with admin access could change the logfile. Dietmar Hacker

1 0

Build stunnel 4.53 binaries for windows error
by Anton Tkachev 01 Aug '12

01 Aug '12

Hey Guys, I'm trying to build stunnel 4.53 binaries for windows on Debian Squeeze x86 using instructions in INSTALL.W32 file. I use the latest openssl-1.0.1c (libssl-dev debian package installed also). At the last step 'make stunnel.exe' returns following error: # make stunnel.exe i586-mingw32msvc-gcc -c -I/usr/src/openssl-0.9.8s-fips/inc32 -mthreads -fstack-protector -O2 -Wall -Wextra -Wno-long-long -pedantic -o str.obj str.c In file included from str.c:38: common.h:392:33: error: openssl/opensslconf.h: No such file or directory common.h:405:27: error: openssl/lhash.h: No such file or directory common.h:406:25: error: openssl/ssl.h: No such file or directory common.h:407:25: error: openssl/err.h: No such file or directory common.h:408:66: error: openssl/crypto.h: No such file or directory common.h:409:26: error: openssl/rand.h: No such file or directory common.h:411:25: error: openssl/md4.h: No such file or directory common.h:413:25: error: openssl/des.h: No such file or directory common.h:417:28: error: openssl/engine.h: No such file or directory In file included from str.c:38: common.h:449: warning: return type defaults to ‘int’ common.h: In function ‘STACK_OF’: common.h:449: error: expected declaration specifiers before ‘*’ token In file included from str.c:39: prototypes.h:50: error: storage class specified for parameter ‘LOG_MODE’ prototypes.h:61: error: storage class specified for parameter ‘SOCKADDR_UNION’ prototypes.h:64: error: expected specifier-qualifier-list before ‘SOCKADDR_UNION’ prototypes.h:67: warning: struct has no members prototypes.h:67: error: storage class specified for parameter ‘SOCKADDR_LIST’ prototypes.h:72: error: storage class specified for parameter ‘COMP_TYPE’ prototypes.h:78: error: expected specifier-qualifier-list before ‘COMP_TYPE’ prototypes.h:114: warning: struct has no members prototypes.h:114: error: storage class specified for parameter ‘GLOBAL_OPTIONS’ prototypes.h:116: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘global_options’ prototypes.h:124: error: expected specifier-qualifier-list before ‘SSL_CTX’ prototypes.h:222: error: storage class specified for parameter ‘SERVICE_OPTIONS’ prototypes.h:224: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘service_options’ prototypes.h:236: error: storage class specified for parameter ‘VAL_TYPE’ prototypes.h:244: error: storage class specified for parameter ‘OPT_UNION’ prototypes.h:250: error: expected specifier-qualifier-list before ‘VAL_TYPE’ prototypes.h:252: error: storage class specified for parameter ‘SOCK_OPT’ prototypes.h:256: error: storage class specified for parameter ‘CONF_TYPE’ prototypes.h:269: error: storage class specified for parameter ‘s_poll_set’ prototypes.h:278: error: storage class specified for parameter ‘DISK_FILE’ prototypes.h:285: error: storage class specified for parameter ‘FD’ prototypes.h:290: error: storage class specified for parameter ‘max_clients’ prototypes.h:291: error: storage class specified for parameter ‘num_clients’ prototypes.h:327: warning: parameter names (without types) in function declaration prototypes.h:347: error: storage class specified for parameter ‘cli_index’ prototypes.h:347: error: storage class specified for parameter ‘opt_index’ prototypes.h:350: error: expected ‘)’ before ‘*’ token prototypes.h:355: error: expected declaration specifiers or ‘...’ before ‘CONF_TYPE’ prototypes.h:361: error: expected specifier-qualifier-list before ‘SERVICE_OPTIONS’ prototypes.h:363: warning: struct has no members prototypes.h:363: error: storage class specified for parameter ‘UI_DATA’ prototypes.h:365: error: expected ‘)’ before ‘*’ token prototypes.h:370: error: expected ‘)’ before ‘*’ token prototypes.h:374: error: expected declaration specifiers before ‘s_poll_set’ prototypes.h:375: error: expected ‘)’ before ‘*’ token prototypes.h:376: error: expected ‘)’ before ‘*’ token prototypes.h:377: error: expected ‘)’ before ‘*’ token prototypes.h:378: error: expected ‘)’ before ‘*’ token prototypes.h:379: error: expected ‘)’ before ‘*’ token prototypes.h:380: error: expected ‘)’ before ‘*’ token prototypes.h:381: error: expected ‘)’ before ‘*’ token prototypes.h:401: error: expected specifier-qualifier-list before ‘SSL’ prototypes.h:422: error: storage class specified for parameter ‘CLI’ prototypes.h:424: error: expected declaration specifiers before ‘CLI’ prototypes.h:426: error: expected ‘)’ before ‘*’ token prototypes.h:430: error: expected ‘)’ before ‘*’ token prototypes.h:431: error: expected ‘)’ before ‘*’ token prototypes.h:432: error: expected ‘)’ before ‘*’ token prototypes.h:433: error: expected ‘)’ before ‘*’ token prototypes.h:434: error: expected ‘)’ before ‘*’ token prototypes.h:436: error: expected ‘)’ before ‘*’ token prototypes.h:450: error: storage class specified for parameter ‘PROTOCOL_TYPE’ prototypes.h:453: error: expected ‘)’ before ‘*’ token prototypes.h:457: error: expected ‘)’ before ‘*’ token prototypes.h:458: error: expected ‘)’ before ‘*’ token prototypes.h:459: error: expected ‘)’ before ‘*’ token prototypes.h:460: error: expected ‘)’ before ‘*’ token prototypes.h:461: error: expected ‘)’ before ‘*’ token prototypes.h:462: warning: type defaults to ‘int’ in declaration of ‘SOCKADDR_UNION’ prototypes.h:462: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token prototypes.h:493: error: storage class specified for parameter ‘SECTION_CODE’ prototypes.h:495: warning: parameter names (without types) in function declaration prototypes.h:496: warning: parameter names (without types) in function declaration prototypes.h:500: error: expected declaration specifiers or ‘...’ before ‘CLI’ prototypes.h:526: error: storage class specified for parameter ‘hwnd’ prototypes.h:530: error: expected ‘)’ before ‘*’ token prototypes.h:535: error: storage class specified for parameter ‘GETADDRINFO’ prototypes.h:536: error: storage class specified for parameter ‘FREEADDRINFO’ prototypes.h:538: error: storage class specified for parameter ‘GETNAMEINFO’ prototypes.h:539: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s_getaddrinfo’ prototypes.h:540: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s_freeaddrinfo’ prototypes.h:541: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s_getnameinfo’ prototypes.h:550: error: expected declaration specifiers before ‘DISK_FILE’ prototypes.h:551: error: expected ‘)’ before ‘*’ token prototypes.h:552: error: expected ‘)’ before ‘*’ token prototypes.h:553: error: expected ‘)’ before ‘*’ token prototypes.h:563: error: expected ‘)’ before ‘*’ token str.c:49: error: storage class specified for parameter ‘canary’ str.c:50: error: storage class specified for parameter ‘canary_initialized’ str.c:50: error: parameter ‘canary_initialized’ is initialized str.c:52: error: storage class specified for parameter ‘ALLOC_LIST’ str.c:55: error: expected specifier-qualifier-list before ‘ALLOC_LIST’ str.c:57: warning: struct has no members str.c:57: error: storage class specified for parameter ‘ALLOC_TLS’ str.c:60: error: expected specifier-qualifier-list before ‘ALLOC_LIST’ str.c:67: warning: struct has no members str.c:59: warning: empty declaration str.c:73: error: expected ‘)’ before ‘*’ token str.c:74: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token str.c:75: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token str.c:77: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:85: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:95: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:175: error: storage class specified for parameter ‘tls_index’ str.c:177: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:181: error: expected ‘)’ before ‘*’ token str.c:185: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token str.c:191: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:198: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:210: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:228: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:291: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:315: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘{’ token str.c:326: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token common.h:449: warning: type of ‘SSL_COMP’ defaults to ‘int’ str.c:175: error: declaration for parameter ‘tls_index’ but no such parameter str.c:57: error: declaration for parameter ‘ALLOC_TLS’ but no such parameter str.c:52: error: declaration for parameter ‘ALLOC_LIST’ but no such parameter str.c:50: error: declaration for parameter ‘canary_initialized’ but no such parameter str.c:49: error: declaration for parameter ‘canary’ but no such parameter prototypes.h:581: error: declaration for parameter ‘str_printf’ but no such parameter prototypes.h:580: error: declaration for parameter ‘str_vprintf’ but no such parameter prototypes.h:579: error: declaration for parameter ‘str_dup’ but no such parameter prototypes.h:577: error: declaration for parameter ‘str_free_debug’ but no such parameter prototypes.h:575: error: declaration for parameter ‘str_detach_debug’ but no such parameter prototypes.h:573: error: declaration for parameter ‘str_realloc_debug’ but no such parameter prototypes.h:571: error: declaration for parameter ‘str_alloc_debug’ but no such parameter prototypes.h:570: error: declaration for parameter ‘str_stats’ but no such parameter prototypes.h:569: error: declaration for parameter ‘str_cleanup’ but no such parameter prototypes.h:568: error: declaration for parameter ‘str_canary_init’ but no such parameter prototypes.h:567: error: declaration for parameter ‘str_init’ but no such parameter prototypes.h:562: error: declaration for parameter ‘libwrap_init’ but no such parameter prototypes.h:557: error: declaration for parameter ‘tstr2str’ but no such parameter prototypes.h:556: error: declaration for parameter ‘str2tstr’ but no such parameter prototypes.h:537: error: declaration for parameter ‘GETNAMEINFO’ but no such parameter prototypes.h:536: error: declaration for parameter ‘FREEADDRINFO’ but no such parameter prototypes.h:534: error: declaration for parameter ‘GETADDRINFO’ but no such parameter prototypes.h:528: error: declaration for parameter ‘passwd_cb’ but no such parameter prototypes.h:526: error: declaration for parameter ‘hwnd’ but no such parameter prototypes.h:500: error: declaration for parameter ‘create_client’ but no such parameter prototypes.h:499: error: declaration for parameter ‘stunnel_thread_id’ but no such parameter prototypes.h:498: error: declaration for parameter ‘stunnel_process_id’ but no such parameter prototypes.h:497: error: declaration for parameter ‘sthreads_init’ but no such parameter prototypes.h:496: error: declaration for parameter ‘leave_critical_section’ but no such parameter prototypes.h:495: error: declaration for parameter ‘enter_critical_section’ but no such parameter prototypes.h:493: error: declaration for parameter ‘SECTION_CODE’ but no such parameter prototypes.h:479: error: declaration for parameter ‘local_getnameinfo’ but no such parameter prototypes.h:463: error: declaration for parameter ‘s_gai_strerror’ but no such parameter prototypes.h:452: error: declaration for parameter ‘find_protocol_id’ but no such parameter prototypes.h:450: error: declaration for parameter ‘PROTOCOL_TYPE’ but no such parameter prototypes.h:425: error: declaration for parameter ‘client_thread’ but no such parameter prototypes.h:422: error: declaration for parameter ‘CLI’ but no such parameter prototypes.h:395: error: declaration for parameter ‘make_sockets’ but no such parameter prototypes.h:394: error: declaration for parameter ‘get_socket_error’ but no such parameter prototypes.h:393: error: declaration for parameter ‘set_socket_options’ but no such parameter prototypes.h:366: error: declaration for parameter ‘sslerror’ but no such parameter prototypes.h:363: error: declaration for parameter ‘UI_DATA’ but no such parameter prototypes.h:356: error: declaration for parameter ‘apply_conf’ but no such parameter prototypes.h:355: error: declaration for parameter ‘parse_conf’ but no such parameter prototypes.h:354: error: declaration for parameter ‘parse_commandline’ but no such parameter prototypes.h:349: error: declaration for parameter ‘ssl_init’ but no such parameter prototypes.h:347: error: declaration for parameter ‘opt_index’ but no such parameter prototypes.h:347: error: declaration for parameter ‘cli_index’ but no such parameter prototypes.h:343: error: declaration for parameter ‘pty_allocate’ but no such parameter prototypes.h:339: error: declaration for parameter ‘s_strerror’ but no such parameter prototypes.h:338: error: declaration for parameter ‘log_error’ but no such parameter prototypes.h:337: error: declaration for parameter ‘sockerror’ but no such parameter prototypes.h:336: error: declaration for parameter ‘ioerror’ but no such parameter prototypes.h:334: error: declaration for parameter ‘fatal_debug’ but no such parameter prototypes.h:328: error: declaration for parameter ‘s_log’ but no such parameter prototypes.h:327: error: declaration for parameter ‘log_flush’ but no such parameter prototypes.h:326: error: declaration for parameter ‘log_close’ but no such parameter prototypes.h:325: error: declaration for parameter ‘log_open’ but no such parameter prototypes.h:317: error: declaration for parameter ‘set_nonblock’ but no such parameter prototypes.h:316: error: declaration for parameter ‘s_accept’ but no such parameter prototypes.h:315: error: declaration for parameter ‘s_socketpair’ but no such parameter prototypes.h:314: error: declaration for parameter ‘s_pipe’ but no such parameter prototypes.h:313: error: declaration for parameter ‘s_socket’ but no such parameter prototypes.h:311: error: declaration for parameter ‘get_limits’ but no such parameter prototypes.h:306: error: declaration for parameter ‘stunnel_info’ but no such parameter prototypes.h:302: error: declaration for parameter ‘signal_post’ but no such parameter prototypes.h:298: error: declaration for parameter ‘bind_ports’ but no such parameter prototypes.h:297: error: declaration for parameter ‘unbind_ports’ but no such parameter prototypes.h:296: error: declaration for parameter ‘daemon_loop’ but no such parameter prototypes.h:295: error: declaration for parameter ‘main_configure’ but no such parameter prototypes.h:294: error: declaration for parameter ‘main_initialize’ but no such parameter prototypes.h:291: error: declaration for parameter ‘num_clients’ but no such parameter prototypes.h:290: error: declaration for parameter ‘max_clients’ but no such parameter prototypes.h:285: error: declaration for parameter ‘FD’ but no such parameter prototypes.h:278: error: declaration for parameter ‘DISK_FILE’ but no such parameter prototypes.h:269: error: declaration for parameter ‘s_poll_set’ but no such parameter prototypes.h:256: error: declaration for parameter ‘CONF_TYPE’ but no such parameter prototypes.h:252: error: declaration for parameter ‘SOCK_OPT’ but no such parameter prototypes.h:244: error: declaration for parameter ‘OPT_UNION’ but no such parameter prototypes.h:236: error: declaration for parameter ‘VAL_TYPE’ but no such parameter prototypes.h:222: error: declaration for parameter ‘SERVICE_OPTIONS’ but no such parameter prototypes.h:114: error: declaration for parameter ‘GLOBAL_OPTIONS’ but no such parameter prototypes.h:72: error: declaration for parameter ‘COMP_TYPE’ but no such parameter prototypes.h:67: error: declaration for parameter ‘SOCKADDR_LIST’ but no such parameter prototypes.h:61: error: declaration for parameter ‘SOCKADDR_UNION’ but no such parameter prototypes.h:50: error: declaration for parameter ‘LOG_MODE’ but no such parameter str.c:342: error: expected ‘{’ at end of input common.h:449: warning: unused parameter ‘SSL_COMP’ str.c:175: warning: unused parameter ‘tls_index’ str.c:57: warning: unused parameter ‘ALLOC_TLS’ str.c:52: warning: unused parameter ‘ALLOC_LIST’ str.c:50: warning: unused parameter ‘canary_initialized’ str.c:49: warning: unused parameter ‘canary’ prototypes.h:581: warning: unused parameter ‘str_printf’ prototypes.h:580: warning: unused parameter ‘str_vprintf’ prototypes.h:579: warning: unused parameter ‘str_dup’ prototypes.h:577: warning: unused parameter ‘str_free_debug’ prototypes.h:575: warning: unused parameter ‘str_detach_debug’ prototypes.h:573: warning: unused parameter ‘str_realloc_debug’ prototypes.h:571: warning: unused parameter ‘str_alloc_debug’ prototypes.h:570: warning: unused parameter ‘str_stats’ prototypes.h:569: warning: unused parameter ‘str_cleanup’ prototypes.h:568: warning: unused parameter ‘str_canary_init’ prototypes.h:567: warning: unused parameter ‘str_init’ prototypes.h:562: warning: unused parameter ‘libwrap_init’ prototypes.h:557: warning: unused parameter ‘tstr2str’ prototypes.h:556: warning: unused parameter ‘str2tstr’ prototypes.h:537: warning: unused parameter ‘GETNAMEINFO’ prototypes.h:536: warning: unused parameter ‘FREEADDRINFO’ prototypes.h:534: warning: unused parameter ‘GETADDRINFO’ prototypes.h:528: warning: unused parameter ‘passwd_cb’ prototypes.h:526: warning: unused parameter ‘hwnd’ prototypes.h:500: warning: unused parameter ‘create_client’ prototypes.h:499: warning: unused parameter ‘stunnel_thread_id’ prototypes.h:498: warning: unused parameter ‘stunnel_process_id’ prototypes.h:497: warning: unused parameter ‘sthreads_init’ prototypes.h:496: warning: unused parameter ‘leave_critical_section’ prototypes.h:495: warning: unused parameter ‘enter_critical_section’ prototypes.h:493: warning: unused parameter ‘SECTION_CODE’ prototypes.h:479: warning: unused parameter ‘local_getnameinfo’ prototypes.h:463: warning: unused parameter ‘s_gai_strerror’ prototypes.h:452: warning: unused parameter ‘find_protocol_id’ prototypes.h:450: warning: unused parameter ‘PROTOCOL_TYPE’ prototypes.h:425: warning: unused parameter ‘client_thread’ prototypes.h:422: warning: unused parameter ‘CLI’ prototypes.h:395: warning: unused parameter ‘make_sockets’ prototypes.h:394: warning: unused parameter ‘get_socket_error’ prototypes.h:393: warning: unused parameter ‘set_socket_options’ prototypes.h:366: warning: unused parameter ‘sslerror’ prototypes.h:363: warning: unused parameter ‘UI_DATA’ prototypes.h:356: warning: unused parameter ‘apply_conf’ prototypes.h:355: warning: unused parameter ‘parse_conf’ prototypes.h:354: warning: unused parameter ‘parse_commandline’ prototypes.h:349: warning: unused parameter ‘ssl_init’ prototypes.h:347: warning: unused parameter ‘opt_index’ prototypes.h:347: warning: unused parameter ‘cli_index’ prototypes.h:343: warning: unused parameter ‘pty_allocate’ prototypes.h:339: warning: unused parameter ‘s_strerror’ prototypes.h:338: warning: unused parameter ‘log_error’ prototypes.h:337: warning: unused parameter ‘sockerror’ prototypes.h:336: warning: unused parameter ‘ioerror’ prototypes.h:334: warning: unused parameter ‘fatal_debug’ prototypes.h:328: warning: unused parameter ‘s_log’ prototypes.h:327: warning: unused parameter ‘log_flush’ prototypes.h:326: warning: unused parameter ‘log_close’ prototypes.h:325: warning: unused parameter ‘log_open’ prototypes.h:317: warning: unused parameter ‘set_nonblock’ prototypes.h:316: warning: unused parameter ‘s_accept’ prototypes.h:315: warning: unused parameter ‘s_socketpair’ prototypes.h:314: warning: unused parameter ‘s_pipe’ prototypes.h:313: warning: unused parameter ‘s_socket’ prototypes.h:311: warning: unused parameter ‘get_limits’ prototypes.h:306: warning: unused parameter ‘stunnel_info’ prototypes.h:302: warning: unused parameter ‘signal_post’ prototypes.h:298: warning: unused parameter ‘bind_ports’ prototypes.h:297: warning: unused parameter ‘unbind_ports’ prototypes.h:296: warning: unused parameter ‘daemon_loop’ prototypes.h:295: warning: unused parameter ‘main_configure’ prototypes.h:294: warning: unused parameter ‘main_initialize’ prototypes.h:291: warning: unused parameter ‘num_clients’ prototypes.h:290: warning: unused parameter ‘max_clients’ prototypes.h:285: warning: unused parameter ‘FD’ prototypes.h:278: warning: unused parameter ‘DISK_FILE’ prototypes.h:269: warning: unused parameter ‘s_poll_set’ prototypes.h:256: warning: unused parameter ‘CONF_TYPE’ prototypes.h:252: warning: unused parameter ‘SOCK_OPT’ prototypes.h:244: warning: unused parameter ‘OPT_UNION’ prototypes.h:236: warning: unused parameter ‘VAL_TYPE’ prototypes.h:222: warning: unused parameter ‘SERVICE_OPTIONS’ prototypes.h:114: warning: unused parameter ‘GLOBAL_OPTIONS’ prototypes.h:72: warning: unused parameter ‘COMP_TYPE’ prototypes.h:67: warning: unused parameter ‘SOCKADDR_LIST’ prototypes.h:61: warning: unused parameter ‘SOCKADDR_UNION’ prototypes.h:50: warning: unused parameter ‘LOG_MODE’ make: *** [str.obj] Error 1 It seems it has hardcoded path to openssl (/usr/src/openssl-0.9.8s-fips). I tried to change this path to the right one in Makefile*, but with no luck - I get the same error. I also tried to build stunnel with openssl-0.9.8s, but openssl configure command from the instruction doesn't work: root@debian:/usr/src/openssl-0.9.8s-i586# ./Configure --cross-compile-prefix=i586-mingw32msvc- mingw shared zlib-dynamic Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [enable-montasm] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags] Regards, Anton.

3 11

"application failed to initialize properly"
by Generic Poster 31 Jul '12

31 Jul '12

Hello Stunnel-users, Whenever I run Stunnel from a Windows 7 Virtual XP machine I receive the following error message: --------------------------- stunnel.exe - Application Error --------------------------- The application failed to initialize properly (0xc0150002). Click on OK to terminate the application. --------------------------- Any ideas as to what causes it or how I can get around the problem? The result is the same regardless of version. -- Best regards, Generic

2 1

Newbie: Success, now failure???
by Roger Bohl (Sr.) 25 Jul '12

25 Jul '12

For several days, I've been using Stunnel (with Blat) successfully (possibly with no intervening re-boots). A day or so ago, the system was re booted Today, however, Stunnel failed. I got the following Stunnel reply message: No limit detected for the number of clients stunnel 4.53 on x86-pc-mingw32-gnu platform Compiled/running with OpenSSL 0.9.8s-fips 4 Jan 2012 Threading:WIN32 SSL:+ENGINE+OCSP+FIPS Auth:none Sockets:SELECT+IPv6 Reading configuration from file stunnel.conf FIPS mode is enabled Compression not enabled Snagged 64 random bytes from .rnd Wrote 1024 new random bytes to .rnd PRNG seeded successfully Initializing inetd mode configuration Certificate: client.pem Certificate loaded Key file: client.pem Private key loaded SSL options set: 0x00000004 Accept option is not allowed in inetd mode Remove accept option or define a [section] Server is down The stunnel.conf file in the Stunnel directory is: CAfile = cert.pem cert = client.pem client = yes RNDfile = .rnd [gmail smtp] ; (I may have had this in or out before. In "cleaning up" various files, I may have thought this to be a comment, and removed it.) accept = 25 connect = smtp.gmail.com:465 The program fails both with and without the [gmail smtp] line included. Except, possibly, for removing ;[comment] lines, no other changes occurred. Can somebody give me a clue as to the cause, and suggest the fix. I'm running Windows Vista. (I found the 17+ page instruction file, by Michal Trojnara, but didn't see a solution, there.) Thanks. Roger Bohl rhbohl(a)gmail.com 707-939-8459 PDT

1 0

please unsubscribe my email - thx
by Rüdiger Konte 24 Jul '12

24 Jul '12

1 0

stunnel and http
by John 23 Jul '12

23 Jul '12

I am running the latest stunnel for Windows on 64-bit Win7 as an application, not as a service. I simply unzipped everything to one folder, configured the "stunnel.conf" file; and when I need to run the program, I can open a command prompt in its folder and type "stunnel stunnel.conf". It then reads my stunnel.conf file and works its magic. This works fine for capturing the data from those programs which I can configure to use localhost and a specific port because I can configure stunnel.conf with accept = ip.address:port Now I have a program that I want to use to download some text files from the internet using http or https. However, this program cannot be manually configured to make a connection with a certain IP and port. Instead, I have to give it an alias-like name, which it then maps to one of several different domain names, makes a DNS query for the IP and transmits to that address the instructions for downloading some text files. So, is it possible to have stunnel "capture" any and all http transports (port 80) or https transports (port 443) from a specific program, regardless of which IP that connection was destined for, so that I can then direct this data traffic from stunnel to socat or from stunnel to an http proxy which I can manually direct to a specific connection? Is this a kind of thing for which stunnel can be used? If so, where can I find the instructions for setting it up? Thanks.

2 2

Reboot Requires Manual: "service stunnel restart"
by John Vasko 21 Jul '12

21 Jul '12

On FreeBSD 9.0 stunnel 4.43 works fine after running "service stunnel restart", but stunnel fails loading on boot. My desired config includes: /usr/local/etc/stunnel/stunnel.conf -------------------------------------------- [attsmtp] client = yes verify = 0 accept = 2525 connect = smtp.att.yahoo.com:465 delay = yes Please advise. See below for messages after bootup: /var/run/stunnel/stunnel.log ------------------------------------ 2012.07.21 02:52:06 LOG7[1378:675300096]: No limit detected for the number of clients 2012.07.21 02:52:06 LOG7[1378:675300096]: signal_pipe: FD=3 allocated (non-blocking mode) 2012.07.21 02:52:06 LOG7[1378:675300096]: signal_pipe: FD=4 allocated (non-blocking mode) 2012.07.21 02:52:06 LOG5[1378:675300096]: stunnel 4.43 on i386-portbld-freebsd9.0 platform 2012.07.21 02:52:06 LOG5[1378:675300096]: Compiled/running with OpenSSL 1.0.0e 6 Sep 2011 2012.07.21 02:52:06 LOG5[1378:675300096]: Threading:PTHREAD SSL:ENGINE Auth:LIBWRAP Sockets:POLL,IPv6 2012.07.21 02:52:06 LOG5[1378:675300096]: Reading configuration from file /usr/local/etc/stunnel/stunnel.conf 2012.07.21 02:52:06 LOG7[1378:675300096]: Snagged 64 random bytes from //.rnd 2012.07.21 02:52:06 LOG7[1378:675300096]: Wrote 1024 new random bytes to //.rnd 2012.07.21 02:52:06 LOG7[1378:675300096]: PRNG seeded successfully 2012.07.21 02:52:08 LOG6[1378:675300096]: Initializing SSL context for service attsmtp 2012.07.21 02:52:08 LOG7[1378:675300096]: SSL options set: 0x00000004 2012.07.21 02:52:08 LOG6[1378:675300096]: SSL context initialized 2012.07.21 02:52:08 LOG5[1378:675300096]: Configuration successful 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=5 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=6 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=6 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=7 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=7 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=8 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=8 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=9 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=9 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: libwrap_init: FD=10 allocated (blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: accept socket: FD=11 allocated (non-blocking mode) 2012.07.21 02:52:08 LOG7[1378:675300096]: Option SO_REUSEADDR set on accept socket 2012.07.21 02:52:08 LOG7[1378:675300096]: Service attsmtp bound to 0.0.0.0:2525 2012.07.21 02:52:08 LOG7[1378:675300096]: Service attsmtp opened FD=11 2012.07.21 02:52:08 LOG7[1378:675300096]: Created pid file /stunnel.pid 2012.07.21 02:52:15 LOG7[1378:675300096]: Dispatching signals from the signal pipe 2012.07.21 02:52:15 LOG3[1378:675300096]: Received signal 2; terminating 2012.07.21 02:52:15 LOG7[1378:675300096]: str_stats: 43 block(s), 3554 byte(s) 2012.07.21 02:52:15 LOG7[1378:675300096]: removing pid file /stunnel.pid

1 1